Multilayer Ceramic Capacitors Microwave Series Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series MLCC is used at high frequencies generally have a small temperature coefficient of capacitance, typical within the 30ppm/C required for NP0 (C0G) classification and have excellent conductivity internal electrode. Thus, WTC RF series MLCC will be with the feature of low ESR and high Q characteristics. Features: Applications: * * * * * High Q and low ESR performance at high frequency. Ultra low capacitance to 0.1pF. Can offer high precision tolerance to 0.05pF. Quality improvement of telephone calls for low power loss and better performance * * elecommunication products & equipments : Mobile phone, T WLAN, Base station. RF module: Power amplifier, VCO. Tuners. External Dimensions: Size Inch (mm) L (mm) W (mm) T (mm)/Symbol MB (mm) 0201 (0603) 0.600.03 0.300.03 0.300.03 L 0.15 0.05 0402 (1005) 1.000.05 0.500.05 0.500.05 N 0.25 +0.05 -0.1 * Reflow soldering only. Fig. 1 The outline of MLCC General Electrical Data: Dielectric NP0 Size Size 0201 & 0402 Capacitance* 0201: 0.1pF to 33pF & 0402: 0.1pF to 22pF Capacitance tolerance Cap5pF: A (0.05pF ), B (0.1pF), C (0.25pF) 5pF<Cap<10pF: B (0.1pF), C (0.25pF), D (0.5pF) Cap10pF: F (1%), G (2%), J (5%) Rated voltage (WVDC) 6.3V, 10V, 25V, 50V, 100V Q* Cap30pF, Q1000; Cap<30pF,Q400+20C Insulation resistance at Ur 10G Operating temperature -55C to +125C Capacitance change 30ppm/C; 0201Cap 22pF, 60ppm/C Termination Ni/Sn (lead-free termination) * Measured at the conditions of 25C ambient temper ature and 30~70% related humidity. Apply 1 0.2Vrms, 1MHz 10% for Cap1,000pF and 1 0.2Vrms, 1kHz 10% for Cap>1,000pF www.element14.com www.farnell.com www.newark.com Page <1> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Capacitance Range Dielectric NP0 Size 0402 Tolerance 6.3 10 25 50 100 0.1pF (0R1) L L L N N B 0.2pF (0R2) L L L N N 0.3pF (0R3) L L L N N 0.4pF (0R4) L L L N 0.5pF (0R5) L L L 0.6pF (0R6) L L L 0.7pF (0R7) L L 0.8pF (0R8) L 0.9pF (0R9) L 1.0pF (1R0) 1.1pF (1R1) NP0 Size Rated Voltage (V DC) 0201 0402 Tolerance 6.3 10 25 50 100 3.1pF (3R1) L L L N N A, B, C A, B 3.2pF (3R2) L L L N N A, B, C A, B 3.3pF (3R3) L L L N N A, B, C N A, B 3.4pF (3R4) L L L N N A, B, C N N A, B, C 3.5pF (3R5) L L L N N A, B, C N N A, B, C 3.6pF (3R6) L L L N N A, B, C L N N A, B, C 3.7pF (3R7) L L L N N A, B, C L L N N A, B, C 3.8pF (3R8) L L L N N A, B, C L L N N A, B, C 3.9pF (3R9) L L L N N A, B, C L L L N N A, B, C 4.0pF (4R0) L L L N N A, B, C L L L N N A, B, C 4.1pF (4R1) L L L N N A, B, C 1.2pF (1R2) L L L N N A, B, C 4.2pF (4R2) L L L N N A, B, C 1.3pF (1R3) L L L N N A, B, C 4.3pF (4R3) L L L N N A, B, C 1.4pF (1R4) L L L N N A, B, C 4.4pF (4R4) L L L N N A, B, C 1.5pF (1R5) L L L N N A, B, C 4.5pF (4R5) L L L N N A, B, C 1.6pF (1R6) L L L N N A, B, C 4.6pF (4R6) L L L N N A, B, C 1.7pF (1R7) L L L N N A, B, C 4.7pF (4R7) L L L N N A, B, C 1.8pF (1R8) L L L N N A, B, C 4.8pF (4R8) L L L N N A, B, C 1.9pF (1R9) L L L N N A, B, C 4.9pF (4R9) L L L N N A, B, C 2.0pF (2R0) L L L N N A, B, C 5.0pF (5R0) L L L N N A, B, C 2.1pF (2R1) L L L N N A, B, C 5.1pF (5R1) L L L N N B, C, D 2.2pF (2R2) L L L N N A, B, C 5.2pF (5R2) L L L N N B, C, D 2.3pF (2R3) L L L N N A, B, C 5.3pF (5R3) L L L N N B, C, D 2.4pF (2R4) L L L N N A, B, C 5.4pF (5R4) L L L N N B, C, D 2.5pF (2R5) L L L N N A, B, C 5.5pF (5R5) L L L N N B, C, D 2.6pF (2R6) L L L N N A, B, C 5.6pF (5R6) L L L N N B, C, D 2.7pF (2R7) L L L N N A, B, C 5.7pF (5R7) L L L N N B, C, D 2.8pF (2R8) L L L N N A, B, C 5.8pF (5R8) L L L N N B, C, D 2.9pF (2R9) L L L N N A, B, C 5.9pF (5R9) L L L N N B, C, D 3.0pF (3R0) L L L N N A, B, C 6.0pF (6R0) L L L N N B, C, D Capacitance Capacitance Rated Voltage (V DC) 0201 Dielectric 1. The letter in cell is expressed the symbol of product thickness. 2. WTC provide E96 (IEC-63) product range with which capacitance10pF. 3. For more information about products with special capacitance or other data, please contact WTC local representative. www.element14.com www.farnell.com www.newark.com Page <2> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Capacitance Range Dielectric NP0 Size 201 402 Tolerance 6.3 10 25 50 100 6.1pF (6R1) L L L N N B, C, D 6.2pF (6R2) L L L N N 6.3pF (6R3) L L L N N 6.4pF (6R4) L L L N 6.5pF (6R5) L L L N 6.6pF (6R6) L L L 6.7pF (6R7) L L 6.8pF (6R8) L L 6.9pF (6R9) L 7.0pF (7R0) 7.1pF (7R1) NP0 Size Rated Voltage (V DC) 201 402 Tolerance 6.3 10 25 50 100 9.1pF (9R1) L L L N N B, C, D B, C, D 9.2pF (9R2) L L L N N B, C, D B, C, D 9.3pF (9R3) L L L N N B, C, D N B, C, D 9.4pF (9R4) L L L N N B, C, D N B, C, D 9.5pF (9R5) L L L N N B, C, D N N B, C, D 9.6pF (9R6) L L L N N B, C, D L N N B, C, D 9.7pF (9R7) L L L N N B, C, D L N N B, C, D 9.8pF (9R8) L L L N N B, C, D L L N N B, C, D 9.9pF (9R9) L L L N N B, C, D L L L N N B, C, D 10pF (100) L L L N N F, G, J L L L N N B, C, D 11pF (110) L L L N F, G, J 7.2pF (7R2) L L L N N B, C, D 12pF (120) L L L N F, G, J 7.3pF (7R3) L L L N N B, C, D 13pF (130) L L L N F, G, J 7.4pF (7R4) L L L N N B, C, D 15pF (150) L L L N F, G, J 7.5pF (7R5) L L L N N B, C, D 16pF (160) L L L N F, G, J 7.6pF (7R6) L L L N N B, C, D 18pF (180) L L L N F, G, J 7.7pF (7R7) L L L N N B, C, D 20pF (200) L L L N F, G, J 7.8pF (7R8) L L L N N B, C, D 22pF (220) L L N F, G, J 7.9pF (7R9) L L L N N B, C, D 24pF (240) L L F, G, J 8.0pF (8R0) L L L N N B, C, D 27pF (270) L L F, G, J 8.1pF (8R1) L L L N N B, C, D 30pF (300) L L F, G, J 8.2pF (8R2) L L L N N B, C, D 33pF (330) L L F, G, J 8.3pF (8R3) L L L N N B, C, D 36pF (360) F, G, J 8.4pF (8R4) L L L N N B, C, D 39pF (390) F, G, J 8.5pF (8R5) L L L N N B, C, D 43pF (430) F, G, J 8.6pF (8R6) L L L N N B, C, D 47pF (470) F, G, J 8.7pF (8R7) L L L N N B, C, D 56pF (560) F, G, J 8.8pF (8R8) L L L N N B, C, D 68pF (680) F, G, J 8.9pF (8R9) L L L N N B, C, D 82pF (820) F, G, J 9.0pF (9R0) L L L N N B, C, D 100pF (101) F, G, J Capacitance Capacitance Rated Voltage (V DC) Dielectric 1. The letter in cell is expressed the symbol of product thickness. 2. WTC provide E96 (IEC-63) product range with which capacitance10pF. 3. For more information about products with special capacitance or other data, please contact WTC local representative. www.element14.com www.farnell.com www.newark.com Page <3> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Packaging Dimension And Quantity: Size Paper Tape Thickness (mm)/Symbol 7" reel 13" reel 0201 (0603) 0.3 0.03 L 15,000 70,000 0402 (1005) 0.5 0.05 N 10,000 50,000 Unit : pieces Reliability Test Conditions and Requirements: No Item 1 Visual and Mechanical 2 Capacitance 3 Q/ D.F. (Dissipation Factor) Test Condition Requirements No remarkable defect. Dimensions to conform to individual specification sheet. 1 0.2Vrms, 1MHz 10% At 25C ambient temperature. Shall not exceed the limits given in the detailed spec. Cap 30pF, Q 1,000; Cap <30pF,Q 400 +20C 4 Dielectric Strength o apply voltage: T 100V, 250% of rated voltage. 250V, 200% of rated voltage. Duration: 1 to 5 sec. Charge and discharge current less than 50mA. 5 Insulation Resistance To apply rated voltage for max. 120 sec. 10G 6 Temperature Coefficient With no electrical load. Operating temperature: -55C~125C at 25C Capacitance change : Within 30ppm/C; 0201Cap 22pF, Within 60ppm/C 7 Adhesive Strength of Termination Pressurizing force: 0201: 2N 0402 : 5N Test time: 101 sec. o remarkable damage or removal of the N terminations. No remarkable damage. Cap change and Q/D.F.: To meet initial spec. 95% min. coverage of all metalized area. 8 Vibration Resistance Vibration frequency: 10~55 Hz/min. Total amplitude: 1.5mm Test time: 6 hrs. (Two hrs each in three mutually perpendicular directions.) Measurement to be made after keeping at room temp. for 242 hrs. 9 Solderability Solder temperature : 235 5C Dipping time : 2 0.5 sec. No evidence of damage or flash over during test. www.element14.com www.farnell.com www.newark.com Page <4> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series No 10 11 Item Test Condition Requirements Bending Test he middle part of substrate shall be presT surized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1mm and then the pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: within 5.0% or 0.5pF whichever is larger. (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) Resistance to Soldering Heat Solder temperature: 260 5C Dipping time: 10 1sec Preheating: 120 to 150C for 1 minute before immerse the capacitor in a eutectic solder. Before initial measurement (Class II only): Perform 150+0/-10C for 1 hr and then set for 24 2hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: within 2.5% or 0.25pF whichever is larger. Q/D.F., I.R. and dielectric strength: To meet initial requirements. 25% max. leaching on each edge. Conduct the five cycles according to the temperatures and time. Temp. Time Step (C) (Min.) 12 Temperature Cycle 1 Min. operating temp. +0/-3 30 3 2 Room temp. 2~3 3 Max. operating temp. +3/-0 30 3 4 Room temp. 2~3 No remarkable damage. Cap change : within 2.5% or 0.25pF whichever is larger. Q/D.F., I.R. and dielectric strength: To meet initial requirements. efore initial measurement (Class II only): B Perform 150+0/-10C for 1 hr and then set for 24 2hrs at room temp. Measurement to be made after keeping at room temp. for 24 2hrs. 13 Humidity (Damp Heat) Steady State Test temp.: 402C Humidity: 90~95% RH Test time: 500+24/-0hrs. Before initial measurement (Class II only): Perform 150+0/-10C for 1hrs and then set for 24 2hrs at room temp. Measurement to be made after keeping at room temp. for 24 2hrs. No remarkable damage. Cap change: NP0: within 5% or 0.5pF whichever is larger. Q/D.F. value: Cap 30pF, Q 350; 10pF Cap <30pF, Q 275 +2.5C Cap <10pF; Q 200 +10C www.element14.com www.farnell.com www.newark.com Page <5> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series No 14 15 16 Item Test Condition Requirements Humidity Load (Damp Heat) Test temp. : 40 2C Humidity : 90~95%RH Test time : 500 +24/-0 hrs. To apply voltage: rated voltage. Before initial measurement (Class II only): To apply test voltage for 1hrs at 40C and then set for 24 2hrs at room temp. Measurement to be made after keeping at room temp. for 242 hrs. No remarkable damage. Cap change: within 7.5% or 0.75pF whichever is larger. Q/D.F. value : Cap 30pF, Q 200; Cap < 30pF, Q 100 +10/3C I.R. : 500M High Temperature Load (Endurance) Test temp. : 1253C To apply voltage : 200% of rated voltage. Test time : 1,000+24/-0hrs. Before initial measurement (Class II only): To apply test voltage for 1hrs at test temp. and then set for 24 2hrs at room temp. Measurement to be made after keeping at room temp. for 24 2 hrs No remarkable damage. Cap change: within 3.0% or 0.3pF whichever is larger. Q/D.F. value : C ap 30pF, Q 350 10pF Cap <30pF, Q275+2.5C Cap<10pF, Q200+10C I.R. : 1G. ESR The ESR should be measured at room temperature and tested at frequency 1 0.1GHz. The ESR should be measured at room temperature and tested at frequency 500 50MHz 0201 & 0402 0.5pFCap1pF :< 350m 1pF<Cap5pF :< 300m 5pF<Cap22pF :< 250m 0201, 22pFCap33pF: < 300m Electrical Characteristics www.element14.com www.farnell.com www.newark.com Page <6> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Electrical Characteristics www.element14.com www.farnell.com www.newark.com Page <7> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Electrical Characteristics Appendixes Size Tape & Reel Dimensions The dimension of paper tape 0201 0402 Thickness L N A0 0.37 0.03 0.62 0.05 B0 0.67 0.03 1.12 0.05 T 0.42 0.03 0.6 0.05 K0 - - W 8 0.10 8 0.10 P0 4 0.10 4 0.10 10xP0 40 0.10 40 0.10 P1 2 0.05 2 0.05 P2 2 0.05 2 0.05 D0 1.55 0.05 1.55 0.05 D1 - - E 1.75 0.05 1.75 0.05 F 3.5 0.05 3.5 0.05 www.element14.com www.farnell.com www.newark.com Page <8> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Size 0201 & 0402 Reel size 7" 13" C 13 +0.5/-0.2 13 +0.5/-0.2 W1 8.4 +1.5/-0 8.4 +1.5/-0 A 178 0.1 330 1 N 60 +1/-0 100 1 The dimension of reel Constructions: No. Name NP0 1 Ceramic material BaTiO3 based 2 Inner electrode 3 4 Termination 5 Cu Inner layer Cu Middle layer Ni Outer layer Sn (Matt) Storage and handling conditions (1) To store products at 5C to 40C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. D ue to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. www.element14.com www.farnell.com www.newark.com Page <9> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Recommended Soldering Conditions: The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. Recommended reflow soldering profile for SMT process with SnAgCu series solder paste. Recommended wave soldering profile for SMT process with SnAgCu series solder. www.element14.com www.farnell.com www.newark.com Page <10> 12/04/13 V1.0 Multilayer Ceramic Capacitors Microwave Series Part Number Table Description Part Number Description Part Number Capacitor, RF, 0.2PF, 25V, NP0, 0201 MC000302 Capacitor, RF, 0.4PF, 50V, NP0, 0402 MC000331 Capacitor, RF, 0.2PF, 25V, NP0, 0201 MC000303 Capacitor, RF, 0.5PF, 50V, NP0, 0402 MC000332 Capacitor, RF, 0.3PF, 25V, NP0, 0201 MC000304 Capacitor, RF, 0.5PF, 50V, NP0, 0402 MC000333 Capacitor, RF, 0.5PF, 25V, NP0, 0201 MC000305 Capacitor, RF, 0.6PF, 50V, NP0, 0402 MC000334 Capacitor, RF, 0.6PF, 25V, NP0, 0201 MC000306 Capacitor, RF, 0.8PF, 50V, NP0, 0402 MC000335 Capacitor, RF, 0.8PF, 25V, NP0, 0201 MC000307 Capacitor, RF, 10PF, 50V, NP0, 0402 MC000336 Capacitor, RF, 10PF, 25V, NP0, 0201 MC000308 Capacitor, RF, 1.0PF, 50V, NP0, 0402 MC000337 Capacitor, RF, 15PF, 25V, NP0, 0201 MC000309 Capacitor, RF, 1.0PF, 50V, NP0, 0402 MC000338 Capacitor, RF, 18PF, 25V, NP0, 0201 MC000310 Capacitor, RF, 1.0PF, 50V, NP0, 0402 MC000339 Capacitor, RF, 1.0PF, 25V, NP0, 0201 MC000311 Capacitor, RF, 1.2PF, 50V, NP0, 0402 MC000340 Capacitor, RF, 1.0PF, 25V, NP0, 0201 MC000312 Capacitor, RF, 1.2PF, 50V, NP0, 0402 MC000341 Capacitor, RF, 1.2PF, 25V, NP0, 0201 MC000313 Capacitor, RF, 1.2PF, 50V, NP0, 0402 MC000342 Capacitor, RF, 1.2PF, 25V, NP0, 0201 MC000314 Capacitor, RF, 1.5PF, 50V, NP0, 0402 MC000343 Capacitor, RF, 1.8PF, 25V, NP0, 0201 MC000315 Capacitor, RF, 1.5PF, 50V, NP0, 0402 MC000344 Capacitor, RF, 22PF, 10V, NP0, 0201 MC000316 Capacitor, RF, 1.8PF, 50V, NP0, 0402 MC000345 Capacitor, RF, 2.0PF, 25V, NP0, 0201 MC000317 Capacitor, RF, 1.8PF, 50V, NP0, 0402 MC000346 Capacitor, RF, 2.2PF, 25V, NP0, 0201 MC000318 Capacitor, RF, 2.0PF, 50V, NP0, 0402 MC000347 Capacitor, RF, 2.7PF, 25V, NP0, 0201 MC000319 Capacitor, RF, 2.0PF, 50V, NP0, 0402 MC000348 Capacitor, RF, 33PF, 10V, NP0, 0201 MC000320 Capacitor, RF, 2.2PF, 50V, NP0, 0402 MC000349 Capacitor, RF, 4.7PF, 25V, NP0, 0201 MC000321 Capacitor, RF, 2.4PF, 50V, NP0, 0402 MC000350 Capacitor, RF, 5.6PF, 25V, NP0, 0201 MC000322 Capacitor, RF, 2.4PF, 50V, NP0, 0402 MC000351 Capacitor, RF, 8.2PF, 25V, NP0, 0201 MC000323 Capacitor, RF, 2.7PF, 50V, NP0, 0402 MC000352 Capacitor, RF, 8.2PF, 25V, NP0, 0201 MC000324 Capacitor, RF, 3.3PF, 50V, NP0, 0402 MC000353 Capacitor, RF, 9.0PF, 25V, NP0, 0201 MC000325 Capacitor, RF, 3.3PF, 50V, NP0, 0402 MC000354 Capacitor, RF, 0.2PF, 50V, NP0, 0402 MC000326 Capacitor, RF, 3.9PF, 50V, NP0, 0402 MC000355 Capacitor, RF, 0.2PF, 50V, NP0, 0402 MC000327 Capacitor, RF, 4.7PF, 50V, NP0, 0402 MC000356 Capacitor, RF, 0.3PF, 50V, NP0, 0402 MC000328 Capacitor, RF, 8.2PF, 50V, NP0, 0402 MC000357 Capacitor, RF, 0.3PF, 50V, NP0, 0402 MC000329 Capacitor, RF, 9.0PF, 50V, NP0, 0402 MC000358 Capacitor, RF, 0.4PF, 50V, NP0, 0402 MC000330 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <11> 12/04/13 V1.0