DATA SHEET
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
NPN SILICON RF TRANSISTOR
NE68018 / 2SC5013
NPN EPITAXIAL SILICON RF TRANSISTOR
FOR HIGH-FREQUENCY LOW-NOISE AMPLIFICATION
4-PIN SUPER MINIMOLD
The mark shows major revised points.
Document No. PU10518EJ01V0DS (1st edition)
(Previous No. P10401EJ2V0DS00)
Date Published August 2004 CP(K)
FEATURES
• High Gain Bandwidth Product (fT = 10 GHz TYP.)
• Low Noise, High Gain
• Low Voltage Operation
• 4-pin super minimold Package
ORDERING INFORMATION
Part Number Quantity Supplying Form
NE68018-A
2SC5013-A
50 pcs (Non reel)
NE68018-A
2SC5013-T1-A
3 kpcs/reel
• 8 mm wide embossed taping
• Pin 3 (Base), Pin 4 (Emitter) face to perforation side of the tape
Remark To order evaluation samples, contact your nearby sales office.
The unit sample quantity is 50 pcs.
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter Symbol Ratings Unit
Collector to Base Voltage VCBO 20 V
Collector to Emitter Voltage VCEO 10 V
Emitter to Base Voltage VEBO 1.5 V
Collector Current IC35 mA
Total Power Dissipation Ptot Note 150 mW
Junction Temperature Tj150 °C
Storage Temperature Tstg −65 to +150 °C
Note Free air
JEITA
Part No.
DISCONTINUED
Data Sheet PU10518EJ01V0DS
2
NE68018 / 2SC5013
ELECTRICAL CHARACTERISTICS (TA = +25°C)
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
DC Characteristics
Collector Cut-off Current ICBO VCB = 10 V, IE = 0 mA − − 1.0
μ
A
Emitter Cut-off Current IEBO VEB = 1 V, IC = 0 mA − − 1.0
μ
A
DC Current Gain hFE Note 1 VCE = 6 V, IC = 10 mA 50 100 250 −
RF Characteristics
Gain Bandwidth Product fT VCE = 6 V, IC = 10 mA − 10 – GHz
Insertion Power Gain ⏐S21e⏐2 VCE = 6 V, IC = 10 mA, f = 2.0 GHz 7.5 9.5 − dB
Noise Figure NF VCE = 6 V, IC = 5 mA, f = 2.0 GHz − 1.8 3.0 dB
Reverse Transfer Capacitance Cre Note 2 VCB = 10 V, IE = 0 mA, f = 1.0 MHz − 0.25 0.8 pF
Notes 1. Pulse measurement: PW ≤ 350
μ
s, Duty Cycle ≤ 2%
2. Collector to base capacitance when the emitter grounded
hFE CLASSIFICATION
Rank EB FB GB
Marking R46 R47 R48
hFE Value 50 to 100 80 to 160 125 to 250
DISCONTINUED
Data Sheet PU10518EJ01V0DS 3
TYPICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified)
Collector Current I
C
(mA)
Collector to Emitter Voltage V
CE
(V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
DC Current Gain h
FE
Collector Current I
C
(mA)
COLLECTOR CURRENT
DC CURRENT GAIN vs.
Gain Bandwidth Product f
T
(GHz)
Collector Current I
C
(mA)
vs. COLLECTOR CURRENT
GAIN BANDWIDTH PRODUCT
250
200
150
100
50
025 50 75 100 125 150
Total Power Dissipation P
tot
(mW)
Ambient Temperature T
A
(˚C)
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Free Air
Reverse Transfer Capacitance C
re
(pF)
Collector to Base Voltage V
CB
(V)
vs. COLLECTOR TO BASE VOLTAGE
REVERSE TRANSFER CAPACITANCE
Collector Current I
C
(mA)
Base to Emitter Voltage V
BE
(V)
COLLECTOR CURRENT vs.
BASE TO EMITTER VOLTAGE
2.0
1.0
1
0.5
0.1
0.2
5 10 20 50
f = 1 MHz
2
50
0.5 1.0
0
40
30
20
10
V
CE
= 6 V 30
20
10
2182
0
4 6 10
A
μ
A
μ
A
μ
A
μ
A
μ
A
μ
A
μ
A
μ
A
μ
A
μ
160
140
120
100
80
60
40
20
IB =
200
180
500
200
1
100
10
20
50
055
V
CE
= 6 V
2 10 20
12
10
1
8
0
2
6
5 10 50
V
CE
= 6 V
f = 1 GHz
022
4
Remark The graphs indicate nominal characteristics.
NE68018 / 2SC5013
DISCONTINUED
Data Sheet PU10518EJ01V0DS
4
Frequency f (GHz)
MAXIMUM AVAILABLE GAIN/INSERTION
POWER GAIN vs. FREQUENCY
Insertion Power Gain |S
21e
|
2
(dB)
Collector Current I
C
(mA)
INSERTION POWER GAIN
vs. COLLECTOR CURRENT
Insertion Power Gain |S
21e
|
2
(dB)
Collector Current I
C
(mA)
NOISE FIGURE vs.
COLLECTOR CURRENT
Noise Figure NF (dB)
Maximum Available Gain MAG (dB)
0.1
50
0
10
0.5 1.0
V
CE
= 6 V
I
C
= 10 mA
20
30
40
|S
21e
|
2
MAG
5.0 1
12
0
8
5 10 20 50
V
CE
= 6 V
f = 2 GHz
2
4
5
4
1
3
0
1
2
5 10 50
V
CE
= 6 V
f = 2 GHz
022
Remark The graphs indicate nominal characteristics.
S-PARAMETERS
NE68018 / 2SC5013
DISCONTINUED
Data Sheet PU10518EJ01V0DS 5
PACKAGE DIMENSIONS
4-PIN SUPER MINIMOLD (UNIT: mm)
0.9±0.1
0.15
+0.1
–0.05
0.3
0 to 0.1
3
1.30
2.0±0.2
1.25
0.650.60
4
21
2.1±0.2
1.25±0.1
0.650.65
0.4
+0.1
–0.05
0.3
+0.1
–0.05
0.3
+0.1
–0.05
0.3
+0.1
–0.05
1. Collector
2. Emitter
3. Base
4. Emitter
PIN CONNECTIONS
R47
NE68018 / 2SC5013
DISCONTINUED
NOTICE
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modication, copy
or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classied according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; ofce equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); trafc control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (articial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specied by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specied ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specic characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
re in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
re control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difcult, please evaluate the safety of the nal products or systems manufactured by you.
8. Please contact a California Eastern Laboratories sales ofce for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales ofce if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales ofces, representatives and distributors,
Please visit our website: www.cel.com/contactus
DISCONTINUED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CEL:
NE68018-T1-A 2SC5013-T1-A 2SC5013-A