https://www.phoenixcontact.com/us/products/1436398
11/23/2020Page1/5
Flush-type connector-SACC-E-M12MS-5CON-M16 PSCUP-1436398
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type connector, male, 5-pos., M12, A-coded, front/screw mounting with M16 thread, with
solder cups, plastic version
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 20 pc
GTIN
GTIN 4046356438346
Weight per Piece (excluding packing) 125.000 g
Custom tariff number 85366990
Country of origin Germany
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Plug / socket)
Degree of protection IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 4 A
https://www.phoenixcontact.com/us/products/1436398
11/23/2020Page2/5
Flush-type connector-SACC-E-M12MS-5CON-M16 PSCUP-1436398
Technical data
General
Rated voltage 60 V
Rated surge voltage 1.5 kV
Number of positions 5
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Solder cup
Insertion/withdrawal cycles > 100
Torque 1.25 Nm ... 1.5 Nm (Installation-side)
Mounting type Front mounting M16 x 1.5 With flat nut
Thread type M16 x 1.5
Material
Flammability rating according to UL 94 HB
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Material, knurls PA 6.6
Sealing material Viton
Cable
Standards/specifications M12 connector IEC61076-2-101
Standards and Regulations
Standards/specifications M12 connector IEC61076-2-101
Flammability rating according to UL 94 HB
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
https://www.phoenixcontact.com/us/products/1436398
11/23/2020Page3/5
Flush-type connector-SACC-E-M12MS-5CON-M16 PSCUP-1436398
Schematic diagram
4 3
1 2
5
Pin assignment M12 male connector, 5-
pos., A-coded, male side
Dimensional drawing
M12 flush-type connector
Dimensional drawing
Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation)
https://www.phoenixcontact.com/us/products/1436398
11/23/2020Page4/5
Flush-type connector-SACC-E-M12MS-5CON-M16 PSCUP-1436398
Classifications
eCl@ss
eCl@ss 10.0.1 27440102
eCl@ss 11.0 27440102
eCl@ss 4.0 27140800
eCl@ss 4.1 27140800
eCl@ss 5.0 27143400
eCl@ss 5.1 27143400
eCl@ss 6.0 27279200
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
eCl@ss 9.0 27440102
ETIM
ETIM 3.0 EC002061
ETIM 4.0 EC002061
ETIM 5.0 EC002061
ETIM 6.0 EC002061
UNSPSC
UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 39121413
UNSPSC 18.0 39121413
UNSPSC 19.0 39121413
UNSPSC 20.0 39121413
UNSPSC 21.0 39121413
Approvals
Approvals
Approvals
EAC
Ex Approvals
https://www.phoenixcontact.com/us/products/1436398
11/23/2020Page5/5
Flush-type connector-SACC-E-M12MS-5CON-M16 PSCUP-1436398
Approvals
Approval details
EAC B.01687
Accessories
Accessories
Protective cap
Sealing cap-PROT-M12 FS-1560251
M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
Sealing cap-PROT-M12 FS-M-1430488
M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the
field
Seal
Flat gasket-SACC-M16-SEAL CLM-1430394
M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
