308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
Metal Oxide Varistors
Overvoltage Protection Device
Raychem Circuit Protection Products
PRODUCT: ROV10, ROV10H
10mm Series
DOCUMENT: SCD 25482
REV LETTER: G
REV DATE: DECEMBER 8, 2009
PAGE NO.: 1 of 10
GENERAL DESCRIPTION
The ROV10-XXX (Radial-leaded Metal Oxide Varistor)
products are 10mm radial leaded varistor devices
suitable for protection of overvoltage transients.
ROV devices can provide protection for a wide variety
of power systems against overvoltage faults such as
lightning, power contact and power induction. Suitable
for a broad range of applications including, but not
limited to security, power supplies, surge strips, etc.,
the ROV device helps to protect valuable equipment
from potential power surge damage by clamping high
energy, short duration impulses. The ROV devices
have high current handling and energy absorption
capability and fast response times to help protect
against transient faults.
FEATURES
• Radial leaded
• Broad Varistor voltage and Vrms range
Varistor voltage : 18V - 1800V
V
rms voltage : 11V - 1000V
• Two surge capability series
Standard series, High surge series
• Various lead types
Straight, Kinked, Other
• Various packaging options
Bulk, Tape & Reel, Ammo Pack
• Helps designers meet the following standards
UL, CSA, VDE
• Fast response time
• High current and energy absorption capability
APPLICATIONS
• Power supplies and power systems
• Line voltage
• Telecommunications systems
• Automotive systems
• Appliances
TYPICAL APPLICATION SCHEMATIC
Protected
device
*
*In some applications, a polymeric PTC device such as a Tyco Electronics PolySwitch device may be used instead of a
fuse to provide a preferred solution.
MATERIALS INFORMATION
RoHS Compliant ELV Compliant
*After May 1, 2005 all ROV devices will be produced as RoHS compliant devices.