Fluke 810
Vibration Tester
The most advanced troubleshooting tool for mechanical
maintenance teams who need an answer now.
The unique diagnostic technology helps you
quickly identify and prioritize mechanical
problems, putting the expertise of a vibration
analyst in your hands.
You take pride in your facility, your team, and your
work. You do what it takes to keep things up and
running, but sometimes there is not enough time or
resources to keep up with the workload, let alone be
proactive about mechanical maintenance. The Fluke
810 Vibration Tester puts you one step ahead by using
a simple step-by-step process to report on machine
faults the first time measurements are taken, without
prior measurement history. The combination of diag-
noses, severity and repair recommendations help you
make informed maintenance decisions and address
critical problems first.
Use the Fluke 810 Vibration Tester to:
• Troubleshoot problem equipment and understand
the root cause of failure
• Survey equipment before and after planned mainte-
nance and confirm the repair
• Commission new equipment and ensure proper
installation
• Provide quantifiable proof of equipment condition
and drive investment in repair or replacement
• Prioritize and plan repair activities and operate more
efficiently
• Anticipate equipment failures before they happen
and take control of spare parts inventories
• Train new or less-experienced technicians and build
confidence and skill across the team
Features and benefits
• On-board identification and location of the most
common mechanical faults (bearings, misalign-
ment, unbalance, looseness) focus maintenance
efforts on root cause, reducing unplanned downtime
• Fault severity scale with four severity levels help
you prioritize maintenance work
• Repair recommendations advise technicians on
corrective action
• On-board context sensitive help provide real-time
tips and guidance to new users
• 2 GB expandable on-board memory provides
enough space for your machinery’s data
• Self-test function ensures optimal performance and
more time on the job
• Laser tachometer for accurate machine running
speed promotes confident diagnoses
• Tri-axial accelerometer reduces measurement time
by 2/3 over single axis accelerometers
• Viewer PC Software expands data storage and
tracking capacity
2 Fluke Corporation Fluke 810 Vibration Tester
Tester specifications
Diagnostic specifications
Standard faults Unbalance, looseness, misalignment and bearing failures
Analysis for Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal
pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary
thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw
compressors, closed coupled machines, spindles
Machine rotational speed range 200 rpm to 12000 rpm
Diagnosis details Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair
details, cited peaks, spectra
Electrical specifications
Ranging Automatic
A/D converter 4 channel, 24 bit
Usable frequency bandwidth 5 Hz to 20 kHz
Digital signal processing functions Automatically configured anti-alias filter, high-pass filter, decimation, overlap-
ping, windowing, FFT, and averaging
Sampling rate 2.56 kHz to 51.2 kHz
Dynamic range 128 dB
Signal to noise ratio 100 dB
FFT resolution 800 lines
Spectral windows Hanning
Frequency units Hz, orders, cpm
Amplitude units in/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile memory SD micro memory card, 2 GB internal + user accessible slot for additional 2 GB
storage
General specifications
Dimensions (HxDxW) 18.56 cm x 7.00 cm x 26.72 cm (7.30 in x 2.76 in x 10.52 in)
Weight (with battery) 1.9 kg (4.2 lb)
Display ¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections
Triaxial sensor connection 4 pin M12 connector
Single axis sensor connection BNC connector
Tachometer Connection Mini DIN 6 pin connector
PC Connection Mini ‘B’ USB (2.0) connector
Battery
Battery type Lithium-ion, 14.8 V, 2.55 Ah
Battery charging time Three hours
Battery discharge time Eight hours (under normal conditions)
AC adapter
Input voltage 100 Vac to 240 Vac
Input frequency 50/60 Hz
Operating system WinCE 6.0 Core
Language Support English, French, German, Italian, Japanese, Portuguese, Simplified Chinese,
Spanish
Warranty Three-years
3 Fluke Corporation Fluke 810 Vibration Tester
Tester specifications continued
Environmental
Operating temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature -20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity 10 % to 95 % RH (non-condensing)
Agency approvals CHINA RoHS, CSA, CE, C TICK, WEEE
Electromagnetic compatibility EN 61326-1:2006, EN 61010:1:2001 2nd ed.
Sensor specifications
Sensor type Accelerometer
Sensitivity 100 mV/g (± 5 %, 25 °C)
Acceleration range 80 g peak
Amplitude nonlinearity 1 %
Frequency response
Z2 - 7,000 Hz ± 3dB
X, Y 2 - 5,000 Hz ± 3dB
Power requirement (IEPE) 18 V dc to 30 V dc, 2 mA to 10 mA
Bias output voltage 12 V dc
Grounding Case grounded
Sensing element design PZT ceramic / shear
Case material 316L stainless steel
Mounting 10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output connector 4-Pin, M12
Mating connector M12 - F4D
Non-volatile memory TEDS 1451.4 compatible
Vibration limit 500 g peak
Shock limit 5000 g peak
Electromagnetic sensitivity, equivalent g 100 μg/gauss
Sealing Hermetic
Temperature range -50 °C to 120 °C (-58 °F to 248 °F) ± 7 %
Warranty One-year
Tachometer specifications
Dimensions (DxW) 2.86 cm x 12.19 cm (1.125 in x 4.80 in)
Weight 96 g (3.4 oz) with cable
Power Powered by 810 Vibration Tester
Detection Laser Diode Class 2
Range 6.0 to 99,999 rpm
Accuracy
6.0 to 5999.9 rpm ± 0.01 % and ± 1 digit
5999.9 to 99999 rpm ± 0.05 % and ± 1 digit
Resolution 0.1 rpm
Effective range 1 cm to 100 cm (0.4 in to 39.27 in)
Response time 1 second (> 60 rpm)
4 Fluke Corporation Fluke 810 Vibration Tester
Viewer PC Software
The Fluke 810 Vibration Tester
includes Viewer PC software,
expanding your data storage and
tracking capability. With Viewer
you can:
• Generate diagnostic reports
and track the severity of your
machine’s condition
• Create machine setups with the
convenience of your keyboard
and mouse, and transfer the data
to your 810 Vibration Tester
• View diagnosis and vibration
spectra in greater detail
• Import and store JPEG images
and Fluke IS2 thermal images for
a more complete view of your
machine’s condition
Fluke-810 Vibration Tester
Includes:
Vibration Tester with diagnostic technology,
tri-axial TEDS accelerometer, accelerometer
magnet mount, accelerometer mounting pad kit
with adhesive, accelerometer quick-disconnect
cable, laser tachometer and storage pouch, smart
battery pack with cable and adapters, shoulder
strap, adjustable hand strap, Viewer PC software,
mini-USB to USB cable, getting started guide,
illustrated quick reference guide, users manual
CD-ROM, training DVD, and hard carrying case.
Industry-leading training…
on your terms
The Fluke 810 Vibration Tester
takes the guesswork out of
diagnosing the most common
mechanical problems, but a better
understanding of vibration and its
impact on your equipment will help
you or your team be more aware
of issues that may come up in the
future. Fluke has partnered with
Mobius Institute, an industry leader
in vibration training, to provide
you with a self-paced DVD train-
ing program using award-winning
Mobius Institute interactive training
tools. This DVD is available with
purchase and will help you learn
more about the basics of vibration
and how to fully utilize the features
and functionality of the Fluke 810
Vibration Tester.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2009-2011 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 4/2011 3564541B D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.®
Tachometer specifications continued
Controls Measure on/off transparent button
Interface 6 Pin Mini DIN
Cable length 50 cm (19.586 in)
Warranty One-year
Tachometer accessories Reflective tape:
1.5 cm x 52.5 cm (0.59 in × 20.67 in)
Viewer PC Software
Minimum hardware requirements 1 GB RAM
Operating system requirements Windows XP, Vista, Windows 7
