SCX15DN - Honeywell - Product.Network

Microstructure Pressure Sensors

Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Serie

FEATURES

• Precision Temperature

Compensation

• Calibrated Zero & Span

• Small Size

• Low Noise

• Low Cost (SCX_NC)

• High Accuracy (SCX_N)

• High Impedance for Low

Power Applications

TYPICAL APPLICATIONS

• Medical Equipment The SCX series sensors provide a very cost-effective solution for pressure

applications that require operation over wide temperature range. These

internally calibrated and temperature compensated sensors were specifically

designed to provide an accurate and stable output over a 0 °C to 70 °C

[32 °F to 158 °F] temperature range. This series is intended for use with non-

corrosive, non-ionic working fluids such as air, dry gases and the like.

• Barometry

• Computer Peripherals

• Pneumatic Controls

• HVAC

ELECTRICAL CONNECTION Devices are available to measure absolute, differential and gage pressures

from 1 psi (SCX01) up to 150 psi (SCX150). The Absolute (A in model

number) devices have an internal vacuum reference and an output voltage

proportional to absolute pressure. The Differential (D in model number)

devices allow application of pressure to either side of the pressure-sensing

diaphragm and can be used for gage or differential measurements.

The SCX series devices feature an integrated circuit (IC) sensor element

and laser trimmed thick film ceramic housed in a compact solvent resistant

case. This package provides excellent corrosion resistance and provides

isolation to external packaging stresses. The package has convenient

mounting holes and pressure ports for ease of use with standard plastic

tubing for pressure connection.

PIN 1) TEMPERATURE OUTPUT (+)

PIN 2) Vs

PIN 3) + OUTPUT

PIN 4) GROUND If the application requires extended temperature range operation, beyond

0 °C to 70 °C [32 °F to 158 °F], two pins which provide an output voltage

proportional to temperature are available for use with external circuitry. The

100 microsecond response time makes this series an excellent choice for

computer peripherals and pneumatic control applications.

PIN 5) - OUTPUT

PIN 6) TEMPERATURE OUTPUT (-)

Note: The polarity indicated is for

pressure applied to port B. (For

absolute devices pressure is applied

to port A and the output polarity is

reversed) The output of the bridge is ratio metric to the supply voltage. Operation from

any dc supply voltage up to 20 Vdc is acceptable.

WARNING

PERSONAL INJURY

DO NOT USE these

products as safety or

emergency stop devices or

in any other application

where failure of the product

could result in personal

injury.

Failure to comply with

these instructions could

result in death or serious

injury.

Contact your local honeywell representative, or go to Honeywell’s website at

www.honeywell.com/sensing for additional details.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for reference only. Do not

use this document as a product installation guide.

• Complete installation, operation, and maintenance information is provided in

the instructions supplied with each product.

Failure to comply with these instructions could result in death or serious

injury.

Sensing and Control

Microstructure Pressure Sensors

Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Serie

PRESSURE RANGE SPECIFICATIONS

Full-Scale Span (1)

Model * Operating

Pressure

Proof

Pressure (2) Sensitivity Min. Typ. Max.

SCX01DN 17.82 mV 18.00 mV 18.18 mV

SCX01DNC 0 psid to 1 psid 20 psid 18 mV/psi 17.00 mV 18.00 mV 19.00 mV

SCX05DN 59.40 mV 60.00 mV 60.60 mV

SCX05DNC 0 psid to 5 psid 20 psid 12 mV/psi 57.50 mV 60.00 mV 62.50 mV

SCX15AN 89.10 mV 90.00 mV 90.90 mV

SCX15ANC 0 psid to 15 psia 30 psia 6.0 mV/psi 85.00 mV 90.00 mV 95.00 mV

SCX15DN 89.10 mV 90.00 mV 90.90 mV

SCX15DNC 0 psid to 15 psid 30 psid 6.0 mV/psi 85.00 mV 90.00 mV 95.00 mV

SCX30AN 89.10 mV 90.00 mV 90.90 mV

SCX30ANC 0 psid to 30 psia 60 psia 3.0 mV/psi 85.00 mV 90.00 mV 95.00 mV

SCX30DN 89.10 mV 90.00 mV 90.90 mV

SCX30DNC 0 psid to 30 psid 60 psid 3.0 mV/psi 85.00 mV 90.00 mV 95.00 mV

SCX100AN 99.00 mV 100.0 mV 101.0 mV

SCX100ANC 0 psid to 100 psia 150 psia 1.0 mV/psi 95.00 mV 100.0 mV 105.0 mV

SCX100DN 99.00 mV 100.0 mV 101.0 mV

SCX100DNC 0 psid to 100 psid 150 psid 1.0 mV/psi 95.00 mV 100.0 mV 105.0 mV

SCX150AN 89.00 mV 90.00 mV 91.00 mV

SCX150ANC 0 psid to 150 psia 150 psia 0.6 mV/psi 85.00 mV 90.00 mV 95.00 mV

SCX150DN 89.00 mV 90.00 mV 91.00 mV

SCX150DNC 0 psid to 150 psid 150 psid 0.6 mV/psi 85.00 mV 90.00 mV 95.00 mV

* Ordering information: Order model number.

GENERAL SPECIFICATIONS

Characteristic Description (Maximum Ratings) All Devices

Supply Voltage (VS) 20 Vdc

Common Mode Pressure 50 psig

Lead Soldering Temperature

(2 seconds to 4 seconds)

250 °C [482 °F]

ENVIRONMENTAL SPECIFICATIONS

Characteristic Description (Maximum Ratings) All Devices

Compensated Operating Temperature 0 °C to 70 °C [32 °F to 158 °F]

Operating Temperature -40 °C to 85 °C [-40 °F to 185 °F]

Storage Temperature -55 °C to 125 °C [-67 °F to 257 °F]

Humidity Limits 0 % RH to 100 % RH

ACCURACY

Model Accuracy

SCX01 through SCX150 Calibrated for span to within ±1 % (Highest accuracy)

SCX01_C through SCX150_C Calibrated for span to within ±5 % (Fine adjustments of zero

and span can be provided in external circuitry)

2 Honeywell • Sensing and Control

Microstructure Pressure Sensors

Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Serie

SCX PERFORMANCE CHARACTERISTICS (3)

Characteristic Min. Typ. Max. Unit

Zero Pressure Offset (4) -300 0.0 300 Microvolt

Combined Pressure Non-Linearity and Pressure Hysteresis (5) – ±0.1 ±0.5 % FSO

Temperature Effect on Span 0 °C to 70 °C [32 °F to 158 °F] (6) – ±0.2 ±0.1 % FSO

Temperature Effect on Offset 0 °C to 70 °C [32 °F to 158 °F] (6) – ±100 ±500 Microvolt

Repeatability (7) – ±0.2 ±0.5 % FSO

Input Resistance (8) – 4.0 – kOhm

Output Resistance (9) – 4.0 – kOhm

Common Mode Voltage (10) 5.8 6.0 6.2 Vdc

Response Time (11) – 100 – Microsec.

Long Term Stability of Offset and Span (12) – ±0.1 – mV

SCX_C SERIES PERFORMANCE CHARACTERISTICS (3)

Characteristic Min. Typ. Max Unit

Zero Pressure Offset -1.0 0.0 ±1.0 mV

Combined Pressure Non-Linearity and Pressure Hysteresis (5)

Models: SCX05DNC, SCX15ANC, and SCX15DNC,

Models: SCX01DNC, SCX30ANC, SCX30DNC, SCX100ANC, SCX100DNC,

SCX150ANC, and SCX150DNC

–

±0.1

±0.2

±1.0

% FSO

Temperature Effect on Span 0 °C to 70 °C [32 °F to 158 °F] (6) – ±0.4 ±2.0 % FSO

Temperature Effect on Offset 0 °C to 70 °C [32 °F to 158 °F] (6) – ±0.2 ±1.0 mV

Repeatability (7) – ±0.2 ±0.5 % FSO

Input Resistance (8) – 4.0 – kOhm

Output Resistance (9) – 4.0 – kOhm

Common Mode Voltage (10) 5.7 6.0 6.3 Vdc

Response Time (11) – 100 – Microsec.

Long Term Stability of Offset and Span (12) – ±0.1 – mV

SPECIFICATION NOTES

Note 1: Full-Scale Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure.

Full-Scale Span is ratiometric to the supply voltage.

Note 2: Maximum pressure above which causes permanent sensor failure.

Note 3: Reference Conditions: (Unless otherwise noted)

A = 25°C, Supply VS = 12 Vdc, Common Mode Line pressure = 0 psig, Pressure applied to Port B. For absolute devices only,

pressure is applied to Port A, and the output polarity is reversed.

Note 4: For models SCX15AN, SCX30AN, SCX100AN, and SCX150AN,

the Maximum zero pressure offset for absolute devices is 0 to ±500 Microvolt.

Note 5: Pressure Hysteresis – the maximum output difference at any point within the operating pressure range for increasing and

decreasing pressure.

Note 6: Maximum error band of the offset voltage and the error band of the span, relative to the 25 °C [77 °F] reading.

Note 7: Maximum difference in output at any pressure within the operating pressure range and the temperature within 0 °C to 70 °C

[32 °F to 158 °F] after:

a) 1,000 temperature cycles, 0 °C to 70 °C [32 °F to 158 °F]

b) 1.5 million pressure cycles, 0 psi to Full-Scale Span.

Note 8: Input resistance is the resistance between pins 2 and 4.

Note 9: Output resistance is the resistance between pins 3 and 5.

Note 10: Common Mode voltage of the output arms (Pins 3 and 5) for VS=12 Vdc.

Note 11: Response time for a 0 psi to Full-Scale Span pressure step change, 10 % to 90 % rise time.

Note 12: Long term stability over a one-year period.

Honeywell • Sensing and Control 3

Microstructure Pressure Sensors

Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Series

Sensing and Control

www.honeywell.com/sensing

PHYSICAL DIMENSIONS for Reference Only (mm/in)

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being

free of defective materials and faulty workmanship.

Contact your local sales office for warranty information. If

warranted goods are returned to Honeywell during the

period of coverage, Honeywell will repair or replace

without charge those items it finds defective. The

foregoing is Buyer’s sole remedy and is in lieu of all

other warranties, expressed or implied, including

those of merchantability and fitness for a particular

purpose.

Specifications may change without notice. The

information we supply is believed to be accurate and

reliable as of this printing. However, we assume no

responsibility for its use.

While we provide application assistance personally,

through our literature and the Honeywell web site, it is up

to the customer to determine the suitability of the product

in the application.

For application assistance, current specifications, or

name of the nearest Authorized Distributor, contact a

nearby sales office. Or call:

1-800-537-6945 USA/Canada

1-815-235-6847 International

FAX

1-815-235-6545 USA

INTERNET

www.honeywell.com/sensing

info.sc@honeywell.com

Honeywell

11 West Spring Street

Freeport, Illinois 61032

008096-1-EN IL50 GLO 1203 Printed in USA