193
System Power Supply
ZUP-SERIES Zero-up CV/CC 200 ~ 800W
䡵Model name
ZUP 10-20
䡵Features
䢇Programmable power supply
Constant voltage/Constant current
䢇Built-in RS232 & RS485 interface
GP-IB interface: Option
䢇External voltage or resistor programming
䢇Last setting memory with safe restart or automatic restart
modes
䢇Input current harmonics: EN61000-3-2 Class A
Series Output
voltage
(0 ~ 10V)
Output
current
(0 ~ 20A)
䡵Specifications
(Low Voltage Directive)
䡵Product lineup
Input
1.
Input voltage range
2. Input current
harmonics
3. Power factor (typ)
Output
1. Constant voltage
2. Constant current
3. Output protections
Environment
1.
Operating temperature
External functions
1. Output ON/OFF
2. Output voltage
programming
3. Output current
programming
4. Remote sensing
5. Communication
interface
Approval
1. Safety standard
2. EMC standard
85 ~ 265VAC (47 ~ 63Hz) universal input voltage
Complies with EN61000-3-2 Class A.
0.99 at 100VAC, 100% load
Load Regulation: 0.005% +2mV, Line Regulation: 0.005% +1mV
RMS ripple: 5mV (5Hz ~ 1MHz bandwidth)
Ripple :50mV(pk to pk) (20MHz bandwidth)
Load Regulation: 0.01% +5mA, Line Regulation: 0.01% +2mA
Over voltage, Over temperature, Over current
0 ~ +50°C: 100% load
By TTL signal or Dry contact
By voltage (0 ~ 4V) or by Resistance (0 ~ 4kΩ)
By voltage (0 ~ 4V) or by Resistance (0 ~ 4kΩ)
Maximum 0.5V drop on each load wires
RS232 and RS485 built-in, IEEE488 option
UL3111-1, EN61010-1
EN61326-1, IEC61326-1 FCC part 15 class A
(*) Contact us about delivery before ordering.
Model name Output voltage Output current Output power Weight
ZUP6-33 0 ~ 33A 198W 2.9kg
ZUP6 ZUP6-66 0 ~ 6VDC 0 ~ 66A 396W 3.2kg
ZUP6-132 (*) 0 ~ 132A 792W 5.8kg
ZUP10-20 0 ~ 20A 200W 2.9kg
ZUP10 ZUP10-40 0 ~ 10VDC 0 ~ 40A 400W 3.2kg
ZUP10-80 (*) 0 ~ 80A 800W 5.8kg
ZUP20-10 0 ~ 10A 200W 2.9kg
ZUP20 ZUP20-20 0 ~ 20VDC 0 ~ 20A 400W 3.2kg
ZUP20-40 (*) 0 ~ 40A 800W 5.8kg
ZUP36-6 0 ~ 6A 216W 2.9kg
ZUP36 ZUP36-12 0 ~ 36VDC 0 ~ 12A 432W 3.2kg
ZUP36-24 (*) 0 ~ 24A 864W 5.8kg
ZUP60-3.5 0 ~ 3.5A 210W 2.9kg
ZUP60 ZUP60-7 0 ~ 60VDC 0 ~ 7A 420W 3.2kg
ZUP60-14 (*) 0 ~ 14A 840W 5.8kg
ZUP80 ZUP80-2.5 0 ~ 80VDC 0 ~ 2.5A 200W 2.9kg
ZUP80-5 0 ~ 5A 400W 3.2kg
ZUP120 ZUP120-1.8 0 ~ 120VDC 0 ~ 1.8A 216W 2.9kg
ZUP120-3.6 0 ~ 3.6A 432W 3.2kg
194
System Power Supply
ZUP-SERIES Zero-up CV/CC 200 ~ 800W
䡵Front panel
䡵Outline drawing
(Unit: mm)
Notes:
1. Mounting screws must not protrude into the power supply more than 6mm.
2. External control connector
Connector: AMP, P/N 102617-5
Receptacle: AMP, P/N 87631-9
Receptacle contacts: AMP, P/N 87523-5(strip form)
P/N 87523-6(loose piece)
2. Wire AWG: 24 to 20
Hand tool for wires connection: AMP, P/N: 90202-2
3. RS232/RS485 communication
EIA/EIA-568A, shielded, 8 contacts connectors
4. Model name and output rating are shown here according to the
specifications.
5. M6 or M4 screws for load wires connection.
6. Input voltage and current rating are shown here according to the
specifications.
195
System Power Supply
ZUP-SERIES Zero-up CV/CC 200 ~ 800W
