Capacitance Values
C0G/NP0 & High Q
0.1pF - 15nF
X7R
47pF - 6.8µF
See overleaf for full list of values
Electrical
C0G/NP0 High Q X7R
Operating Temperature
-55°C to
+125°C
-55°C to
+125°C
-55°C to
+125°C
Temperature Coefficient (Typical)
0 ± 30
ppm/°C
0 ± 30
ppm/°C ±15%
Insulation Resistance
Time constant (Ri xCr) (whichever is the least)
100GΩ or
1000s
100GΩ or
1000s
100GΩ or
1000s
Ageing Rate
None None Typical 1% per
time decade
Mechanical
Termination Material
See ordering information below
Solderability
IEC 60068-2-58. Passed 3 times reflow
profile defined in J-STD-020
Printing
Consult sales office
Lead Free Soldering
Termination codes 2 and 3 ranges are
fully compliant with the RoHS and WEEE
directives and parts are compatible with lead
free solders.
Climatic Category
55/125/56
Reeled Quantities
See Capacitance tables overleaf
MLCCs
for Non-
magnetic
applications
C0G/NP0, High Q and X7R
Copper Barrier MLCCs
41/09
Specification
Ordering Information
Multilayer ceramic capacitors
with silver/palladium (Ag/Pd)
terminations have often been
used in medical applications
where non-magnetic
components are required, for
example in MRI equipment.
The use of conventional nickel
barrier terminations is not
suitable due to nickel exhibiting
magnetic properties.
However, RoHS requirements
have dictated the use of
lead-free solders, and the
composition of these solders
has resulted in an increase in
soldering temperatures. This
has caused solder leaching
problems for the Ag/Pd
termination, and meant
alternative terminations have
had to be found.
As copper is non-magnetic,
one solution is to use a copper
barrier instead of a nickel
barrier, with a tin finish on top,
and this is the solution Syfer
has developed.
This copper barrier termination
is offered with selected non-
magnetic C0G/NP0, High Q
and X7R dielectrics, providing a
fully non-magnetic component.
To meet high temperature
260ºC soldering reflow profiles
as detailed in J-STD-020, C0G/
NP0 dielectrics are supplied
with sintered termination and
X7R dielectrics are supplied
with Syfer’s award winning
FlexiCap™ termination.
1210 3 100 0103 J X T _ _ _
Chip
size Termination Voltage Capacitance in
picofarads (pF)
Capacitance
tolerance Dielectric Packaging Suffix
0402
0603
0505
0805
1206
1111
1210
1808
1812
2220
2225
2 (for C0G/NP0
& High Q only)
= Sintered
silver base with
copper barrier
(100% matte tin
plating). RoHS
compliant.
3 = FlexiCap™
base with
copper barrier
(100% matte
tin plating).
RoHS compliant.
016 = 16V
025 = 25V
050 = 50V
063 = 63V
100 = 100V
150 = 150V
200 = 200V
250 = 250V
500 = 500V
630 = 630V
1K0 = 1000V
1K2 = 1200V
1K5 = 1500V
2K0 = 2000V
3K0 = 3000V
<10pF Insert a P for
the decimal point,
eg P300 = 0.3pF,
8P20 = 8.2pF.
10pF 1st digit
is 0. 2nd and
3rd digits are
significant figures
of capacitance
code. The 4th digit
is number of 0’s
following
eg. 0103 =
10000pF
Values <1pF in
0.1pF steps, above
this values are E24
series
<4.7pF
H = ±0.05pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
4.7pF &
<10pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
10pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
C = C0G/
NP0 (1B)
X = X7R
(2R1)
Q = High Q
T = 178mm
(7”) reel
R = 330mm
(13”) reel
B = Bulk
pack - tubs
Used for
specific
customer
requirements
Chip Size
0402 0603 0805 1206 1210 1808 1812 2220 2225
Min Cap 47pF 100pF 330pF 680pF 1.5nF 2.2nF 3.3nF 6.8nF 10nF
Min Cap Tolerance Minimum tolerance ±5%
16V 10nF 100nF 330nF 1.0µF 1.5µF 1.5µF 3.3µF 5.6µF 6.8µF
25V 6.8nF 68nF 220nF 820nF 1.2µF 1.2µF 2.2µF 4.7µF 5.6µF
50V 63V 4.7nF 47nF 150nF 470nF 1.0µF 680nF 1.5µF 3.3µF 3.3µF
100V 1.5nF 10nF 47nF 150nF 470nF 330nF 1.0µF 1.5µF 1.5µF
200V250V 680pF 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0µF 1.0µF
500V - 1.5nF 8.2nF 33nF 100nF 100nF 270nF 560nF 680nF
630V - - 4.7nF 10nF 27nF 33nF 150nF 330nF 390nF
1000V - - 3.3nF 4.7nF 15nF 18nF 56nF 120nF 150nF
1200V - - - 3.3nF 10nF 10nF 33nF 82nF 100nF
1500V - - - 2.7nF 6.8nF 6.8nF 22nF 47nF 68nF
2000V - - - 2.2nF 4.7nF 4.7nF 10nF 27nF 33nF
Reeled Quantities
7” Reel 5000 4000 3000 2500 2000 2000 500 500 500
13” Reel 13” reel quantities available on request 8000 2000 2000 2000
NOTE: Other capacitance values may become available, please contact our Sales Office if you need values other than those shown in the above tables.
For dimensions and soldering information, please go to our website (www.syfer.com) or see our MLC Catalogue.
X7R Maximum Capacitance Values
Syfer Technology Limited
Old Stoke Road, Arminghall, Norwich
Norfolk NR14 8SQ England
Telephone (General): +44 1603 723300
Telephone (Sales): +44 1603 723310
Fax: +44 1603 723301
Email: sales@syfer.co.uk Syfer Technology Ltd is a member of Ceramic
and Microwave Products (CMP) group.
design - creations@panpublicity.co.uk
41/09
C0G/NP0 & High Q Maximum Capacitance Values
Chip Size 0402 0603 0505 0805 1206 1111
1210 1808 1812 2220 2225
Min Cap 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF 0.3pF 1.0pF 1.0pF 2.0pF 2.0pF
Min Cap
Tolerance Minimum tolerance ±0.05pF (<4.7pF), 0.1pF ( 4.7pF & <10pF) and ±1% ( 10pF)
50V 63V 22pF 100pF 220pF 470pF 1.5nF - - - - -
100V 15pF 68pF 150pF 330pF 1.0nF 2.2nF 2.2nF 4.7nF 10nF 15nF
150V 10pF 47pF 100pF 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8nF 10nF
200V250V 6.8pF 33pF 56pF 56pF 470pF 1.0nF 1.0nF 2.2nF 4.7nF 6.8nF
300V - 27pF 47pF 120pF 390pF 820pF 820pF 1.8nF 3.9nF 5.6nF
500V - - - 68pF 270pF 680pF 680pF 1.5nF 3.3nF 4.7nF
630V - - - - 150pF 390pF 390pF 1.0nF 2.2nF 3.3nF
1000V - - - - 82pF 220pF 220pF 680pF 1.5nF 2.2nF
2000V - - - - 18pF 68pF 68pF 150pF 470pF 560pF
3000V - - - - - - - 68pF 150pF 220pF
Reeled
Quantities
7” Reel 5000 4000 2500 3000 2500 10002000 2000 500 500 500
13” Reel 13” reel quantities available on request 8000 2000 2000 2000
NOTE: Other capacitance values may become available, please contact our Sales Office if you need values other than those shown in the above tables.
For dimensions and soldering information, please go to our website (www.syfer.com) or see our MLC Catalogue.
