SPEC NO: DSAF2081 REV NO: V.4 DATE: APR/08/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102001720
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
WP59BL/EGW
High Efficiency Red (GaAsP/GaP)
White Diffused
50 100
Green (GaP) 20 60
60°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red
Green
627
565 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red
Green
625
568 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red
Green
45
30 nm IF=20mA
C Capacitance High Efficiency Red
Green
15
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red
Green
2
2.2
2.5
2.5 V IF=20mA
IR Reverse Current High Efficiency Red
Green 10
10 uA VR = 5V
Parameter High Efficiency Red Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 160 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds