CORCOM Product Guide Single Phase External Power Line Filter for Frequency Converters FC Series UL Recognized FC10 FC Series Specifications The FC filters provide filtering for frequency inverters and variable speed motor drives. Designed for very noisy applications, they attenuate conducted interference at low and high frequency ranges and protect programmable logic controllers from RF noise on the AC power line. These filters perform best when installed on the line side of the motor drive. The FC filters better prevent noise from returning to the line, enabling equipment to meet strict European regulations on RFI. Suited for field wiring applications, these filters are ideal for EMC troubleshooting and field refurbishing. The FC filters feature side flanges for easy mounting and DIN type terminals which eliminate live metal parts, allowing safer and easier connection. The filters could also be sold as an accessory to motor drives marketed into Europe. Electrical Schematics 6 & 12 Amps Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: 3.8 mA 6.7 mA 2250 VDC 1450 VDC 50/60 Hz Rated voltage (max.): 250 VAC Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .01 06A 12A 16A 25A 36A 9 5 4 2 0 .03 .05 19 17 15 14 6 26 25 22 22 14 Frequency-MHz .1 .5 1 5 10 30 50 65 70 70 70 40 60 70 70 70 35 35 35 48 50 Frequency-MHz .1 .5 1 5 10 30 50 70 70 70 70 45 45 45 50 50 37 37 36 36 27 65 65 65 75 68 65 65 65 75 75 Line-to-line in 50 ohm circuit LINE LOAD 16, 25 & 36 Amps Current Rating .01 .03 .05 06A 12A 16A 25A 36A 10 14 14 14 14 10 14 14 14 14 35 30 29 17 17 60 51 55 42 42 75 75 75 75 75 75 75 75 75 75 60 75 75 70 70 LOAD LINE Resistor location for reference only. 58 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Single Phase External Power Line Filter for Frequency Converters (Continued) FC Series Case Dimensions 6, 12, 16FC10 A Part No. (max) Hole: .203 x .156 5.16 x 3.96 (4) LINE LOAD B C This hole indicates the "Line" side and may be on either flange. D F E A B (max) C (max) D .020 .51 E (max) RFI Power Line Filters Case Styles F .010 .254 6FC10 4.60 116.8 3.10 78.7 1.78 45.21 2.677 67.8 3.70 94.0 2.00 50.8 12FC10 5.95 151.3 3.96 100.6 2.18 55.4 3.50 88.9 4.53 114.8 2.00 50.8 16FC10 5.95 151.3 3.96 100.6 2.18 55.4 3.50 88.9 4.53 114.8 2.00 50.8 25FC10 6.90 175.3 5.48 139.2 2.55 64.77 4.90 124.5 5.94 150.9 2.756 70.0 36FC10 6.90 175.3 5.48 139.2 2.55 64.77 4.90 124.5 5.94 150.9 2.756 70.0 8-32 Screws (2) 6FC10, 12FC10, 16FC10 Phoenix contact VDFK4 Accepts 10 AWG solid wire, 12 AWG stranded wire Torque Spec: 5.5 - 7.0 in.lb Part Numbers 06FC10 12FC10 16FC10 25, 36FC10 This hole indicates the "Line" side and may be on either flange. 25FC10 36FC10 Slots: .260 x .156 6.60 x 3.96 (4) D B C F E A 8-32 Screws (2) 25FC10, 36FC10 Phoenix contact VDFK6 Accepts 8 AWG solid wire, 10 AWG stranded wire Torque Spec: 13.5 - 16 in.lb 59 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com