Transmissive Optoswitch VTL11D1H - D7H Slotted Switch -- 0.395 High PRODUCT DESCRIPTION This series of interrupter type transmissive optoswitches combines an infrared emitting diode (IRED) with an NPN phototransistor in a one piece, sealed, IR transmitting plastic case. The sealed construction improves resistance to debris and moisture. Internal apertures over detector and/or emitter are available to increase position sensing resolution. These devices are furnished with PC board mount leads. Refer to VTL13H for devices with flying leads. RoHS Compliant ABSOLUTE MAXIMUM RATINGS Maximum Temperatures Storage and Operating: Lead Soldering Temperature: -40C to 85C 260C (1.6 mm from case, 5 seconds max.) GENERAL CHARACTERISTICS (@ 25C unless otherwise noted) Parameter Symbol Text Conditions Input IRED VR IR = 100 A 2.0V Min. Continuous Forward Current IF Derate 0.73 mA/C above 30C 40 mA Max. Forward Voltage Drop VF IF = 20 mA 1.8V Max. Collector Breakdown Voltage VBR(CEO) IC = 100 A 30V Min. Emitter Breakdown Voltage VBR(ECO) IC = 100 A 5.0V Min. PD Derate 0.91 mW/C above 30C 50 mW Max. Reverse Voltage Power Dissipation Output Detector PACKAGE DIMENSIONS inch (mm) PerkinElmer Optoelectronics, 1 22001 Dumberry, Vaudreuil, Canada J7V 8P7 32 Phone: 877-734-6786 Fax: 450-424-3413 www.perkinelmer.com/opto ELECTRO-OPTICAL CHARACTERISTICS @ 25C (See also curves, pages 32 & 33) DARK CURRENT (1) LIGHT CURRENT, IP PART NO. (4) Test Conditions mA Min. SATURATION VOLTAGE Test Conditions nA Max. IF mA VCE Volts 20 5 Test Conditions APERTURE COMBINATION (2) Volts Max. IF mA VCE Volts 0 10 IF mA IC mA Emitter Detector 20 0.25 None None VTL11D1H 0.5 VTL11D1-20H 0.15 20 5 100 0 10 0.4 20 0.25 .020" Wide None VTL11D3H 2.0 20 5 100 0 10 0.4 20 1.8 None None VTL11D3-20H 0.6 20 5 100 0 10 0.4 20 1.8 .020" Wide None VTL11D5-20H 0.15 20 5 100 0 10 0.4 20 0.25 .020" Wide .010" Wide VTL11D6-20H 0.075 20 5 100 0 10 0.4 20 0.25 .020" Wide .005" Wide VTL11D7H 0.75 20 5 100 0 10 0.4 20 0.25 VTL11D7-20H 0.225 20 5 100 0 10 0.4 20 0.25 100 0.4 None .020" Wide .020" Wide .020" Wide Notes: 1. The dark current is measured with the part totally shielded from ambient light. With 2150 lux (200 fc) from a cool white fluorescent lamp falling on the part, the typical dark current will be 3 A for VTL11DH devices. Equivalent light from an incandescent lamp will result in significantly greater currents. 2. The apertures used for these slotted switches are .040" (1.02 mm) high. 3. The case material is polysulfone and should be cleaned with alcohol or freon TF only. Avoid chlorinated hydrocarbons and solvents such as acetone or toluene, as damage may result. 4. VTL11D7-20H accommodates most applications. The other parts in this series are available only for specialized, high volume applications. PerkinElmer Optoelectronics, 22001 Dumberry, Vaudreuil, Canada J7V 8P7 33 Phone: 877-734-6786 Fax: 450-424-3413 www.perkinelmer.com/opto