a~í~=pÜÉÉía~í~=pÜÉÉí
¤EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Power line chokes
Current-compensated ring core double chokes
250 V AC, 0.2 … 47 mH, 0.3 … 6 A, +40 °C / + 50 °C / +60 °C / +70 °C
Series/Type: B82721A/J/K
Date: October 2016
210/16
Please read Cautions and warnings and
Important notes at the end of this document.
Rated voltage 250 V AC
Rated inductance 0.2 ... 47 mH
Rated current 0.3 ... 6 A / +40 °C, +50 °C, +60 °C, +70 °C
Construction
Current-compensated ring core double choke
Ferrite core wih epoxy coating (UL 94 V-0)
Plastic case (UL 94 V-0)
Potting (UL 94 V-0)
Sector winding
Features
High resonance frequency due to special winding technique
Approx. 1% stray inductance for symmetrical interference suppression
Suitable for wave soldering
Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
UL1) and /or ENEC (VDE) approvals
Construction approved to EN 60335-1 (VDE 0700-1)2)
RoHS-compatible
Applications
Suppression of common-mode interferences
Switch-mode power applications
Electronic ballasts in lamps
Power inverters
Terminals
Base material CuNi18Zn20
Layer composition Ni, Sn
Hot-dipped
Pins 0.7 u 0.7 (mm)
Lead spacing 10 u 5 (mm) or 10 u 15 (mm)
Marking
Product brand, approval signs and VDE standard number, ordering code, graphic symbol, rated
current, rated voltage, rated inductance, date of manufacture (YYWWD.internal ID code)
Delivery mode
Blister tray in cardboard box
1) UL approval with 300 V AC
2) Certified values:
Glow wire test (GWT to IEC 60695-2-11): +750 °C, 2 s / +850 °C, 30 s
Ball pressure test (BP to IEC 60695-10-2): +125 °C
B82721A
B82721J
B82721K
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
310/16
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawings and pin configurations
Horizontal version (B82721A)
Vertical version (B82721J) Vertical version (B82721K)
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
410/16
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated voltage VR250 V AC (50/60 Hz)
Test voltage Vtest 1500 V AC, 2 s (line/line)
Rated temperature TR+40 °C / +50 °C / +60 °C / +70 °C
Rated current IRReferred to 50 Hz and rated temperature
Rated inductance LRMeasured with Agilent 4284A at 0.1 mA, +20 °C
Measuring frequency: LRd1 mH: f=100 kHz
LR > 1 mH: f= 10 kHz
Inductance is specified per winding.
Inductance tolerance r30% at +20 °C
Inductance decrease'L/L0< 10% at DC magnetic bias with IR, +20 °C
Stray inductance Lstray,typ Measured with Agilent 4284A at 5 mA, +20 °C, typical
values
Measuring frequency: LRd1 mH: f= 100 kHz
LR > 1 mH: f= 10 kHz
DC resistance Rtyp Measured at +20 °C, typical values, specified per winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: +(245 r3) °C, (3 r0.3) s
Wetting of soldering area t95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 r5) °C, (10 r1) s
(to IEC 60068-2-20, test Tb)
Climatic category 40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, d75% RH
Weight Approx. 5 g
Approvals IEC / EN 60938-2, UL 1283 (E70122)
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
510/16
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Horizontal version B82721A
IR
A
LR
mH
Lstray,typ
PH
Rtyp
m:
TR
°C
Ordering code Approvals
Horizontal version
0.3 47 500 2200 +50 B82721A2301N020 uu
0.4 39 450 2000 +40 B82721A2401N020 uu
0.4 27 300 1700 +40 B82721A2401N021 uu
0.4 39 450 2000 +70 B82721A2401N023 uu
0.5 27 290 1100 +60 B82721A2501N022 uu
0.5 18 250 1400 +40 B82721A2501N001 uu
0.5 15 160 800 +40 B82721A2501N021 uu
0.6 15 170 700 +40 B82721A2601N020 uu
0.7 10 110 550 +60 B82721A2701N020 uu
1.2 6.8 80 280 +40 B82721A2122N020 uu
1.5 3.3 37 180 +40 B82721A2152N001 uu
2.0 1.0 13 80 +40 B82721A2202N001 uu
2.5 0.6 8 60 +40 B82721A2252N020 uu
2.6 0.4 6 55 +40 B82721A2262N001 uu
3.6 0.4 6 35 +40 B82721A2362N001 uu
4.0 0.7 7 30 +40 B82721A2402N020 uu
6.0 0.2 2.5 15 +40 B82721A2602N020 uu
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
610/16
Please read Cautions and warnings and
Important notes at the end of this document.
Vertical versions B82721J, B82721K
u = approval granted
IR
A
LR
mH
Lstray,typ
PH
Rtyp
m:
TR
°C
Ordering code Approvals
Vertical version (J) Vertical version (K)
0.3 47 500 2200 +50 B82721J2301N020 B82721K2301N020 uu
0.4 39 450 2000 +40 B82721J2401N020 B82721K2401N020 uu
0.4 27 300 1700 +40 B82721J2401N021 B82721K2401N021 uu
0.4 39 450 2000 +70 B82721J2401N023 B82721K2401N023 uu
0.5 27 290 1100 +60 B82721J2501N022 B82721K2501N022 uu
0.5 18 250 1400 +40 B82721J2501N001 B82721K2501N001 uu
0.5 15 160 800 +40 B82721J2501N021 B82721K2501N021 uu
0.6 15 170 700 +40 B82721J2601N020 B82721K2601N020 uu
0.7 10 110 550 +60 B82721J2701N020 B82721K2701N020 uu
1.2 6.8 80 280 +40 B82721J2122N020 B82721K2122N020 uu
1.5 3.3 37 180 +40 B82721J2152N001 B82721K2152N001 uu
2.0 1.0 13 80 +40 B82721J2202N001 B82721K2202N001 uu
2.5 0.6 8 60 +40 B82721J2252N020 B82721K2252N020 uu
2.6 0.4 6 55 +40 B82721J2262N001 B82721K2262N001 uu
3.6 0.4 6 35 +40 B82721K2362N001 uu
4.0 0.7 7 30 +40 B82721K2402N020 uu
6.0 0.2 2.5 15 +40 B82721K2602N020 uu
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
710/16
Please read Cautions and warnings and
Important notes at the end of this document.
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Current derating Iop/IR
versus temperature TA
B82721A/J/KPower line chokes
Current-compensated ring core double chokes
810/16
Cautions and warnings
Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
Particular attention should be paid to the derating curves given there.
The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
The following points must be observed if the components are potted in customer applications:
Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
The effect of the potting material can change the high-frequency behaviour of the components.
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
910/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS / TDK:
B82721A2152N1 B82721A2202N1 B82721A2362N1 B82721A2401N20 B82721A2501N1 B82721A2701N20
B82721A2122N20 B82721A2262N1 B82721A2401N21 B82721K2122N20 B82721K2152N1 B82721K2202N1
B82721K2262N1 B82721K2362N1 B82721K2401N20 B82721K2401N21 B82721K2501N1 B82721K2701N20
B82721A2122N020 B82721A2152N001 B82721A2202N001 B82721A2362N001 B82721A2401N020
B82721A2401N021 B82721A2701N020 B82721K2122N020 B82721K2152N001 B82721K2202N001
B82721K2362N001 B82721K2401N020 B82721K2401N021 B82721K2701N020 B82721A2402N020
B82721A2601N020 B82721J2122N020 B82721J2152N001 B82721J2301N020 B82721J2301N021
B82721J2401N020 B82721J2401N021 B82721J2501N021 B82721J2701N020 B82721K2252N020
B82721K2301N020 B82721K2401N022 B82721K2401N025 B82721K2402N020 B82721K2501N021
B82721K2602N020 B82721K2701N022 B82721K2501N22 B82721A2252N020 B82721J2401N23 B82721A2501N21
B82721J2202N1 B82721K0152N001 B82721K2401N23 B82721J2252N20 B82721K0152N003 B82721A2401N23
B82721J2501N22 B82721A2602N20 B82721J2262N1 B82721J2601N20 B82721A2301N20 B82721A2501N22
B82721K0152N002 B82721K2601N20 B82721A2262N001 B82721K2501N001 B82721A2602N020
B82721A2501N021 B82721A2501N001 B82721A2301N020 B82721K2262N001 B82721A2401N023
B82721K2401N023 B82721K2601N020 B82721A2501N022 B82721A2252N20