F-218 (Rev 10OCT17) MMT-107-01-L-MT MMT-130-02-L-DH MMT-120-02-L-SH (2.00 mm) .0787" MMT SERIES HORIZONTAL SURFACE MOUNT HEADER Available with optional pick & place pads Board Mates: CLT, SQT, SQW, ESQT, TLE, SMM, MMS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MMT Cable Mates: TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold RoHS Compliant: Yes APPLICATIONS MMS MMT HORIZONTAL PROCESSING Surface mount and mixed technology options Single or double row Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-25) (0.15 mm) .006" max (26-36)* *(.004" stencil solution may be available; contact IPG@samtec.com) (2.00 mm) .0787" pitch RECOGNITIONS MMT For complete scope of recognitions see www.samtec.com/quality NO. PINS PER ROW 1 LEAD STYLE PLATING OPTION -F -01 FILE NO. E111594 = (3.20 mm) .126" post 02 thru 36 -02 ALSO AVAILABLE (MOQ Required) * Alignment pins * Locking clips * Molded pick & place pads * Other platings Contact Samtec. = (4.45 mm) .175" post No. of positions x (2.00) .0787 36 02 (2.00) .0787 = Single Row -L = Double Row (7.62) .300 x (6.35) .250 35 -MT (2.00) .0787 (0.51) .020 SQ POST (1.27) .050 (2.79) .110 -DH -P (2.54) .100 (2.00) .0787 Note: Some lengths, styles and options are non-standard, non-returnable. -MT -MT = Double Row Mixed Technology = Matte Tin 36 -DH -DH -T No. of positions x (2.00) .0787 (2.00) .0787 (4.00) .157 01 -SH = Gold flash on post, Matte Tin on tail = 10 " (0.25 m) Gold post, Matte Tin on tail 01 (2.00) .0787 -SH ROW OPTION (6.22) .245 POST (2.79) .110 (6.22) .245 (1.27).050 TYP (1.07) .042 (1.07) .042 -DH -MT -SH Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. OPTION -K = (4.00 mm) .157" DIA Polyimide Film Pick & Place Pad (3 positions minimum) -P = Pick & Place Pad (2 positions minimum) -"XXX" = Polarized Position Specify position of omitted pin -TR = Tape & Reel Packaging