MIL-DTL-38999 Series III EN3645 TV-CTV www.amphenol-socapex.com Tri-StartTM TV-CTV Amphenol NOTES 2 Tri-StartTM TV-CTV Amphenol TABLE OF CONTENTS Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 * General characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 * Mechanical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 * Environmental characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 * Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 * Insert arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 * Coding - Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 STANDARD RANGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TV METALLIC SHELLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Aluminium shells presentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Bronze shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Stainless steel shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Overall dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CTV COMPOSITE SHELLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Presentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Overall dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRINTED CIRCUIT BOARD CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Panel drilling for composite and metallic receptacles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Printed circuit board connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Receptacles equipped with size 22D contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 16 16 16 17 20 20 20 22 22 23 24 EXTENDED RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 REDUCED FLANGE. . . N . E . W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STAND OFF RECEPTACLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TVS-Y/TVS-YN HERMETIC RECEPTACLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LANYARD RELEASE PLUGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . THRU-BULKHEAD RECECTACLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECEPTACLES WITH ENHANCED SEALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTEGRATED BACKSHELLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-DTL-38999 SERIES III OPTICAL CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 41 42 44 46 46 47 47 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 PROTECTIVE CAPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Standard metallic caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Rubber caps. . .N . E .W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BACKSHELLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OTHER ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Dummy receptacles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Holding support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Plastic dust caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Crimp contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Piggy back grommets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Sealing plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Dummy contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Standard PC tail contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Reducing ferrules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . APPLICATION TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Crimping tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Insertion and removal tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 48 49 50 51 51 51 51 52 52 53 53 53 54 55 55 55 HOW TO ORDER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 * Standard versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Hermetic versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Lanyard released plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Cross references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tri-StartTM TV-CTV 56 58 59 62 3 Amphenol Tri-StartTM TV-CTV ABOUT US Amphenol ABOUT AMPHENOL SOCAPEX Socapex For over 65 years, Amphenol Socapex has been providing rugged and reliable connectors and interconnect solutions to a large base of customers worldwide in the military, aerospace and industrial markets. Our products and solutions,designed for rugged and unique situations involving extreme conditions, provide the innovativeness and flexibility essential to meet the needs and requirements of these demanding sectors. Headquartered in the Technic Valley between Geneva and Mont-Blanc, Amphenol Socapex has 30,000 m2 of manufacturing capacity. Our in-house molding, machining, screw machining & assembly capabilities within our 2 facilities in France & India give us the ability to manage all types of volume with consistent quality. More info on www.amphenol-socapex.com Amphenol Socapex is part of Amphenol Group. Thyez (74), France ABOUT AMPHENOL Manufacturing site in Pune, India Amphenol Founded in 1932, Amphenol is one of the largest manufacturers of interconnect products in the world. The company designs, manufactures, and markets electrical, electronic, and fiber optic connectors, interconnect systems, and coaxial and specialty cables. Amphenol products are engineered and manufactured in the Americas, Europe, Asia and Africa and sold by a worldwide sales and marketing organization. Amphenol has a diversified presence as a leader in high growth areas of the interconnect industry and provides solutions for customers in the automotive, broadband, industrial, information technology and data communications, military and aerospace, mobile devices, and mobile networks markets. More info on www.amphenol.com AMPHENOL & environmental certification AMPHENOL SOCAPEXSOCAPEX QUALITY &quality ENVIRONMENTAL CERTIFICATION 4 Quality certification : ISO 9001 : 2000 Thyez (France) and Pune (India) Military market quality certification (NATO) : AQAP 2110 Thyez (France) Aeronautical market quality certification : EN9100 : 2003 Thyez (France) and Pune (India) Environnemental certification : ISO 14001 (2004) Thyez (France) Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV CONNECTOR RANGE & ACCESSORIES TV METALLIC SHELLS CTV COMPOSITE SHELLS REDUCED FLANGE STAND OFF RECEPTACLE STANDARD NEW RANGE DERIVATED TVS-Y/TVS-YN HERMETIC RECEPTACLES BREAKAWAY CONNECTORS THRU-BULKHEAD RECEPTACLES RECEPTACLES WITH ENHANCED SEALING INTEGRATED BACKSHELLS TVOP STARTOP BACKSHELLS PROTECTIVE CAPS MIL-DTL-38999 OPTICAL CONNECTORS ACCESSORIES Tri-StartTM TV-CTV NEW 5 Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS GENERAL CHARACTERISTICS TV-CTV CONNECTORS (MIL-DTL-38999 SERIES III/EN3645) * * * * * * * * MIL-DTL-38999 series III connectors EN3645 connectors Dedicated to harsh environment applications 9 shell sizes (from 09 to 25) Thread coupling 100% scoop-proof More than 80 contact arrangements Intermountable with MIL-DTL-38999 series I AMPHENOL ADDED VALUE Amphenol goes further the European and American standards by offering an extended range with: * * * * * * Inserts compatible with quadrax Grounded connectors with conductive insert for specific use Receptacles with reinforced sealing Hermetic version in Y & N classes High density inserts (with size 23 contacts) Filtered versions using tubular or planar technology MAIN FEATURES SHELL MATERIAL AND PLATING: * Aluminium Standard material * Composite Lightweight solution up to 70%weight saving Corrosion resistant up to 2000H of salt spray exposure * Firewall capability Stainless steel * Marine bronze PLATING: * Olive drab cadmium * Nickel * Passivation * Black zinc nickel High corrosion resistance Robustness for marine applications CONTACTS * * * Standard contacts plated with a minimum of 1.27m gold Size 00, 4, 8, 10, 12, 16, 20, 22D, 23 Signal, power, twinax, coax, quadrax and optical termini Contact protection: interfacial seal ensures sealing around each contact and prevents electrolytic erosion OTHERS Quick coupling * Mate and self-lock in a 360 turn of the coupling nut * Anti-decoupling device for high vibration performance EMI/RFI protection: * Shell to shell bottoming * Grounding fingers on the plug shell APPLICATIONS Military and aeronautic applications: battlefield, ground vehicles, aircrafts, communication systems... Advanced industrial applications: high vibration requirements, high density 6 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS 1 8 5 13 9 9 7 12 7 14 10 4 11 6 2 1 2 3 4 5 6 7 Coupling nut Quick coupling thread Ratchet Anti decoupling device Plug shell Spring fingers (EMI) Grommet 8 9 10 11 12 13 14 Receptacle shell Contact retention clips Crimping pin contact Crimping socket contact Interfacial seal Socket insert Pin insert * Thermoplastic insert * Silicone rubber back insert and interfacial seal * Durability: - 500 cycles - 1500 cycles with composite connector " CTV " fitted with " H " and " J " contact types * Shocks: half sine wave of 300 G magnitude during 3ms per EIA364.27 * Sine vibrations: - 60 g from - 55C to + 175C (olive drab cadmium finish) - 60 g from - 55C to +200C (nickel finish and firewall version) * Random vibrations per EIA364.28: - 1 G2 / Hz at 175C olive drab cadmium finish - 1G2 / Hz at 200C nickel finish and firewall version - 5G2 / Hz at ambient * Bending moment Shell size MIL-DTL-38999 Series III Amphenol Bending moment Nm A 09 11.3 B 11 33.9 C 13 45.2 D 15 56.5 E 17 67.8 79.1 F 19 G 21 90.4 H 23 101.7 J 25 113.0 * Contact retention force Contact Size 23 22D 20 16 12 8 4 Maximum load (N) 44 44 67 111 111 111 150 Tri-StartTM TV-CTV 7 Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS * Salt spray exposure and working temperature: * Waterproof shells Shell material Shell finish Salt spray exposure per EIA364.26 Class norm Amphenol Operating temperature mini maxi Shell to shell Conductivity Composite Electroless Nickel O.D cadmium 2000 H 2000 H M J CTV-RF CTV-RW -65C -65C +200C* +175C 3m 3m Aluminium Electroless Nickel O.D cadmium Durmalon (Ni-PTFE) Green Zinc Cobalt Black Zinc Nickel 48 H 500 H 500H 96H 500H F W T Z TVS-RF TV-RW TV-DT TV-RZ TV-ZN TV-DZ -65C -65C -65C -65C -65C +200C* +175C +175C +175C +175C 1m 2.5m 2.5m 3m 2.5m Stainless steel Nickel -- 500 H 500 H S K TVS-RS TVS-RK -65C -65C +200C* +200C* 1m 10m Bronze -- 500 H TVS-RB -65C +200C* 5m Shell materiel Shell finish Salt spray exposure per EIA364.26 Class norm Amphenol Stainless steel Nickel - 48 H 500 H N Y TVS-YN TVS-Y * Hermetic shells Operating temperature min max -65C -65C +200C* +200C* * 175C maxi only for high-density contact arrangements * Humidity: per MIL-DTL-38999: 3.29 * Altitude immersion: according to MIL-DTL-38999 III standard (except hermetics) * Air leakage < 1.10 - 7 cm3/s under 1 bar of differential pressure (hermetics only) * Fluid immersion per EIA364.10: * Hydraulic fluid, per MIL-H-5606 * Gasoline, per ASTM-D-4814 * Turbine fluid, grade JP-8, per MIL-DTL-83133 (NATO TYPE 34) * Gasohol, per A-A-52530 * Lubricating oil, per MIL-L-7808 * One part isopropyl alcohol, per TT-I-735, grade A or B ; and 3 parts mineral spirits, per A-A-2904, type II, grade A or P-D-680, type I, by volume * Lubricating oil, per MIL-PRF-23699 * Defrosting fluid, per MIL-A-8243 * Cleaning compound, diluted for cleaning, per MIL-PRF-87937 type I alkaline base 8 * Coolant, dielectric fluid, synthetic silicate ester base MIL-PRF47220 (Coolanol 25) or equivalent * Hydraulic fluid M2-V Chevron oil ST0145LB0001 or equivalent Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS * Contact rating - nominal current per contact Contact size 23 *1 22 D 20 16 12 8 4 00 Crimp (A) 5 5 7.5 13 23 60 100 230 Hermetic (A) 3 3 5 10 17 - - - PC Tail (A) 3 3 4.5 10 17 40 - - Resistance 15 8 4.7 2 1.1 0.6 0.26 - * Contact resistance Contact Size 23 *1 22D 20 16 12 8 4 Resistance (m) 15 8 4.7 2 1.1 0.6 0.26 - at ambiant > 5.103 Mohms - at maximum temperature > 103 Mohms * Insulation resistance * Service rating Dielectric withstanding voltage (Vrms) Service At sea level mated unmated 1300 1300 M 15000 meters mated unmated 800 550 21000 meters mated unmated 800 350 34000 meters mated unmated 800 200 Working voltage Vrms 400 Vdc 550 I 1800 1800 1000 600 1000 400 1000 200 600 850 II 2300 2300 1000 800 1000 500 1000 200 900 1250 * Dimensions of acceptable contacts and cables Contact Size Contact Diameter mm Crimp barrel Diameter mm Acceptable cables Depth mm 23 *1 0,68 0,88 0,03 3,81 22D 0.76 0.88 0.03 3.58 20 1 1.19 0.03 5.30 16 1.57 1.70 0.03 5.30 12 2.36 2.54 0.06 10 8 3.60 4.6 0.05 10 4 5.70 7.4 0.05 12 Outside diameter (mm) Gauge AWG Section mm2 22 0.38 22 0.38 20 0.60 16 1.34 12 3.30 24 0.22 24 0.22 22 0.38 18 0.93 14 1.94 26 0.15 26 0.15 24 0.22 20 0.60 - 8 8.98 Max acceptable: 10mm2 4 21.10 28 0.095 28 0.095 - Min Average Max - - 1.2 0.76 1.20 1.37 1.02 1.83 2.11 1.68 2.41 2.77 2.46 3.20 3.61 4.50 - 5.2 7.73 - 8.4 *1 High-Density arrangements Tri-StartTM TV-CTV 9 Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS INSERT ARRANGEMENTS 23 Contact Size 22D (high density) 20 16 12 8 4 Front face of male insert. (Only the major keyway is illustrated) Caption Coax Differential Twinax Quadrax Power contacts Grounded cavity - - Available: - - - 09 YY Y 5 5 1 4 6 - / 09G01 09-05 N/A 1 8 Twinax A 35 / 09N351 09-35 2 3 M 4 6 5 22D 09-09 9 23 B 1 A C A 35 9-35 M 6 22D B A B A 98 / 09N98 09-9811-01** I 1 3 8 20 Twinax A 98 9-98 I 3 20 9-94 09-94 MI 2 2 20 20 A A C B 11-12 1 12 B2 11-2 I 2 16 Y 11 B A D A D - / 11N01 11-01 1 8 Twinax B 2 / 11N02 11-02 I 2 16 B C - / 11N04 11-04 I 4 20 B 5 / 11N05 11-05 I 5 20 YY 11 9 8 10 7 19 23 D D 4 A B C 4 / 13N04 13-04 I 4 16 A B99 / 11N99 11-99 I 7 20 B 1 B C E D C 8 / 13N08 13-08 I 8 20 2 D 6 22D 13-32 2 12 32 23 K B M R L B C N G F J T D P H K E YY D 15 / 15N15 15-15 I 14 1 20 16 A M N B U C P S H G E C 98 / 13N98 13-98 I 10 20 Y A J 15-04 I 4 12 C J F C 35 / 13N35 13-35 M 22 22D Y D 05 / 15N05 15-05 M 5 16 B A K D L C G C A D Y H 22 - / 13N26 13-26 M E C 1 YY 15 B D C B 98 / 11N98 11-98 I 6 20 F A H E G E Y Y G F A F B F Y C 5 E 3 B 35 / 11N35 11-35 M 13 22D 11-19 YY 13 A 2 12 6 - / 11N12 11-12 II 1 12 YY 1 11 13 A A E C B 10 A 2 3 YY Y 4 6 2 3 MIL-DTL-38999 Series III / EN3645 insert arrangement reference TV-CTV insert arrangement Service class Number of contacts Contact sizes - - R F D E D 18 / 15N18 15-18 I 18 20 M L N K V U H P B R C D S T J A E G F D 19 / 15N19 15-19 I 19 20 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS 23 Contact Size 22D (high density) 20 16 12 8 INSERT ARRANGEMENTS 4 Front face of male insert. (Only the major keyway is illustrated) Caption - Coax Differential Twinax Quadrax Power contacts Grounded cavity Available: - - 1 13 22 11 Y Y 23 24 22 22D H D 35 / 15N35 15-35 M 37 22D Y Y Y 1 A B 6 30 11 Y 10 4 17 17 YY 32 40 25 47 1 10 17 32 3 55 16 24 31 39 46 3 52 16 24 31 39 J N Y M X L B 7-75 2 8 inax K A S T U D V E G 3 B 52 46 25 A1 M 17 32 32 25 40 40 47 47 A 53 53 P N A E 99 17-99 I 21 2 20 16 F H D E 11 F 11 F/ 19N11 19-11 19-11 II II 11 11 16 16 W V A C 2 8 Coax N K R M - / 19N31 19-31 M 1 12 G T R P B R A S B T C Z U 7 C M 6 4 12 D N A E V W H J G J R L B B T G W H J G D P F K E S R d P N 14 22D L 12 22D Y T e K H P G c N E d B V f L A U Z a K J B V Y H G W D X E F NS S T 4 8 Twinax 26 20 A Y Y J T C C ZU DU D V EV E W GH F G F c N b M L S T d g a Z K J A U e H B L L C E D D F C V f Y B F 11 F 11 19-11 19-11 II II 11 11 16 16 16 R K E E/ 99 99 EE99 17N99 17-99 17-99 17-99 I I I 21 212 2 2120 2016 16 2 20 K G G F D W X G E F 19-30 I 2 16 29 20 Z a H X Y G F 32 / 19N32 19-32 I 32 20 F D E 10 17 25 34 43 51 1 16 58 64 1 2 65 3 66 9 16 24 33 42 50 57 63 F 35 / 19N35 19-35 M 66 22D A A H H B X K W J HJ K B YZ XL P C G H E F J AR R P 19-28 I 4 C W g J e b M F T S R X D V Y A U h b J B D E D Y M C L F 11 11 -F/ 17N75 19-11 17-75 17-75 19-11 17-75 II II M 11 112 2 16 1628 8 8 Twinax Twinax Twinax C T U BN M L F B D B E F 18 19-18 M j c M E A S M L D B R P K C F F A G L E V B K U A B A K C Z X J H W Y J C U E 26 / 17N26 17-26 I 26 20 2 A H A AS Y F 2 Y 12 Coax 8 Twinax Y B T b c K - / 17N22 17-22 M A S Z L B C 8 P M N C g S 52 52 16 46 46 24 3124 3931 39 - / 19N17 19-17 M 1 4 2 20 16 8 Twinax 10 22D h 19 S J C U Tri-StartTM TV-CTV K B L 10 R P N a 5 QQ X KB B D 16 22D Y L 55 55 B A N L G F 3 9 B 9 16 A K C 19 W H 1 H B Z J A 17 10 10 4 4 - / 17N20 17-20** M 4 16 Y Y A D E 99 1 1 E 35 E 35 E 99 E 35E /35 17N35 17-75 17-99 17-35 17-52 17-52 17-99 2 2 17-75 17-35 17-52 17-35 17-52 17-35 17-52 17-73 M I 3 3 MM I M 2 21 2 2 2 21 2 55 4 2 4 25555 2 8 20 16 22D 55 28 73 8 8 20 16 5 8 5 22D 8 22D Twinax (Meets 17-82 23 17-82 22D Quadrax Twinax (Meets 17-82 Boeing8Spec) (Meets (Meets 17-82 Boeing Spec) Boeing Spec) Y Boeing Spec) (meets 17-82 Boeing spec) Y 1 2 3 4 5 A 4 53 55 9 E 35 17-35 M 55 22D 1 2 3 4 5 R 47 1 Y Y Q E 8 20 3 2 9 E 8 / 17N08 17-08 II 8 16 F 1 12 D M 9 P 40 25 4 53 E 6 / 17N06 17-06 I 6 12 Q C 11 C E 2 / 17N02 17-02 M 38 1 22D 8 Twinax 13 H E A 16 14 15 B F F D G C D D 97 / 15N97 15-97 I 15-55 55 23 A E B M G 3 16 17 K L A J 31 15-25** M 17 YY 1 3 14 MIL-DTL-38999 Series III / EN3645 insert arrangement reference TV-CTV insert arrangement Service class Number of contacts Contact sizes - - 15 4 16 5 25 17 21 18 6 19 7 20 8 10 9 12 15 2 - 19-88 I 88 23 11 Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS INSERT ARRANGEMENTS 23 Contact Size 22D (high density) 20 16 12 8 4 Front face of male insert. (Only the major keyway is illustrated) Caption Coax Differential Twinax Quadrax Power contacts Grounded cavity - Available: - - J 21 L K B K D F G 11 / 21N11 21-11 I 11 12 Y 21 P Y f N M B X m t q p e d L Z n P U D E J H T G S 2 8 twinax C G K J P L N M N M B N h M f K 12 g L 23 R J m z y x e n AA GG FF w d p BB HH EE v c n p e M Z L d K c b J C a G D F E H C K D R X V 3 D 16 25 35 46 56 67 77 86 94 95 96 97 4 99 98 7 H 21 / 23N21 23-21 II 21 16 23-14 I 14 12 8 6 E F G 1 2 5 T H 121 23 Y Y C S U J E 21-121 B Y Y k q f B Y m G 39 / 21N39 21-39 I 37 2 20 16 A P W L H - / 23N06 23-06 M 6 8 twinax P A X B F T N 11 G 75 / 21N75 21-75 M 4 8 coax or 8 twinax* Y Y Quadrax not available G S r g P k A C 21-48 M 4 8 power C Q j i h G 35 / 21N35 21-35 M 79 22D D B D E B D 41 E - / 21N20 21-AJ M 18 20 R 71 61 D F A F 79 W V U T S 21 A 23 R 31 51 C C F G 41 / 21N41 21-41 I 41 20 Q E W V B P H J K D a b c N Y 1 A C Y k r L F A M K B G 16 / 21N16 21-16 II 16 16 A s g R j i h S W V U T R G Y A M N H E S Y J C L - Y MIL-DTL-38999 Series III / EN3645 insert arrangement reference TV-CTV insert arrangement Service class Number of contacts Contact sizes - - A H G - 100 15 24 34 45 55 66 76 85 93 H 35 / 23N35 23-35 M 100 22D Y U q CC DD u b A V r s t a B W 23 24 25 C X 22 21 44 20 43 52 19 42 41 51 40 D E Y F Z 50 18 39 17 38 16 37 15 36 14 13 G H H 53 / 23N53 23-53 I 53 20 40 22D 45 53 49 35 1 2 26 3 27 4 46 28 5 29 6 47 30 48 31 7 32 8 33 9 34 10 11 12 - / 23N54 23-54 M 9 16 R Sk m GG FF x h w g L n AA y i N U z j P M 4 12 T f K V A W p BB HH B q CC DD EE u v d e X C r Y F b c H 55 / 23N55 23-55 I 55 20 E a t J D Z s G H 23-151 151 23 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS Contact Size 23 22D (high density) 20 16 12 8 INSERT ARRANGEMENTS 4 Front face of male insert. (Only the major keyway is illustrated) Caption - Coax Differential Twinax Quadrax Power contacts Grounded cavity Available: - - - MIL-DTL-38999 Series III / EN3645 insert arrangement reference TV-CTV insert arrangement Service class Number of contacts Contact sizes - - - Y W 25 r T C P D c E d y JJ e R z BB n m N M f 1 18 19 J 6 K L J 4 / 25N04 25-04 I 48 8 20 16 A U T a b S R P 25 q Z p n N v k m t u K 60 67 74 76 A G 94 W 82 93 99 G A P A N a J 8 / 25N08 25-08 M 8 8 twinax J 11 / 25N11 25-11 N 2 9 20 10 power V P C R N D S A Z Y 4 25-1A I 4 16 M 2 L E U K V J H J T a 25 L V 17 9 36 48 71 82 94105 S 125 7 F 14 24 35 47 58 81 93 70 A U 115 122 4 G H 25 114 104 T 16 R e q P d p N 128 121 n b M L E J 16 20 C S g V T a h D U E T U R G t u X B Y v AA Z C a p R n m M z k h y L x g F c w d e E G H Shell f Size & J Insert Arrg. for: K 8 coax x r c h u t s d g f P N D e F G H J K L M E Amphenol Aerospace J 43 / 25N43 25-43 I 23 20 20 16 L 8 36 5 1 7 67 V 90 A T 3 C R B 3 4 35 45 56 66 78 89 Z 23 D m N y k d x h M L e g K 40 20 63 42 52 3 43 4 30 58 6 32 56 8 9 33 10 57 45 34 15 7 44 46 16 J 5 31 54 55 65 47 17 53 64 48 18 25-90 25-187 I 4 2 187 16 8 Twinax 41 66 35 19 G 62 59 49 F H f 2 28 29 51 60 20 c 1 39 40 50 61 21 E b w 37 36 22 a 97 9 16 22D v C n 101 512 23 24 Y z P 4 26 27 38 25 B X q p 99 A u AA r S 6 t s U 98 2 25-62 25-92** I M 8 4 92 16 8 20 W 79 57 D 2 K 24-61 J25-61 61 / 25N61 25-61 25-61 I I 61 61 20 24 1 46 13 11 12 13 14 25-F425-F4 22D=M, Balance =I SizeSize 22D=M, Balance =I 49 13 4 49 22D 13 16 4 12 22D 16 12 23 Crimp Rear Release Matrix Military P/N delivered with 8 twinax and proprietary P/N delivered with size 8 coaxial contacts for RG 180 and RG 195 wire. Not available in composite version. Available in hermetic version. Delivered with twinax contacts for simple braid cable (M17/1760002, AECMA Pr EN 3375 - 003, Raychem 10612, EPD44690, EPD44691). Delivered with twinax contacts for double braid cable (PAN 6421, AECMA Pr EN 3375 - 004, Raychem 10613, EPD44692, EPD44693). 5015 MIL-DTL-38999, Series III TV Special Insert Arrangements A 13 12 14 23 2 15 1 3 2 3 4 4 B A K 16 15 14 D 13 C L 9 H M 23 H G 8 G 22 21 20 24 25 31 30 10 32 A 2 11 12 26 13 27 14 28 15 B 3 C 26500 P A D 1 1 J J B Tri-StartTM TV-CTV 83723 III 16 M v Matrix Pyle 20 N C b Quadrax not available Z a A b A YZ B a b B XY u v Cc X u vc C W t t GG GG d D d HH HHw W w s xJJ FF F F e D E NN NN JJ Vs e V x PP y rEE EEMM PP KK f E F KK f U U r y LL LL z G g g F qq DD M M DD TT z BB AA h H pp h G CC AA CC SS i n J n m k jBB I H R R P K m M J N L J k P Series II JT J 46 / 25N46 Series I LJT Series III TV 25-46 I Service Rating Number of Contacts 40 4 Contact Size 2 q 26482 N b w Matrix 2 P D B a SJT r s A p k H 25-41 I 11 2 3 16 12 coax 8 twinax 22 3 22D 20 n m S F Z Y X W I q S b B II U - / 25N26 25-26 I 5 4 12 8 coax 38999 V * ** Y q i J 25-37 I 37 16 Y T f r V R Z e t j K G p s k H Y 25 c d n m W L F Z X M Y a K D X m c Y N C k r A P W h f Insert Arrangements A 5 6 7 J 24 / 25N24 25-24 I 12 12 16 12 B V g J 29 / 25N29 J 35 / 25N35 25-29 25-35 I M 29 128 16 Front face of pin inserts 22D illustrated W 15 8 J 37 / 25N37 MIL-DTL-38999, Series I LJT, II JT, III TV 22 23 G 4 21 Quadrax not available E X J 15 25 III ace of pin inserts illustrated D W e Y K 1 8 59 19 3 14 20 24 F H 2 13 18 10 D W G C S 12 11 Z X F V Y M E B R J 20 / 25N20 25-20 N 13 3 4 16 8 twinax 12 coax 10 20 Y U 6 K D 1 W F J 19 / 25N19 25-19 I 19 12 C d Z 4 4 power 1 A P N C T 7 3 X L B 5 M E H S R P G U f D E D B T J B T c b C F C E F 6 8 twinax S B G B Y R A H H 81 84 78 36 85 F 68 53 U - / 25L17 25-17 M 36 22D 7 42 33 N H J K E g X L 59 28 L D f h 41 M e Y M w 26 32 79 J 7 / 25N07 25-07 M 97 2 22D 8 Twinax C V d s 24 21 72 Y B c r 15 64 46 G H h k 7 29 37 22 16 F g AA CC p R B KK DD q S HH LL EE s U b x GG FF A a w v u t V Z Y X 13 Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS INSERT ARRANGEMENTS Total Service number Arrangements Class of contacts 09-05* 09-09 09-35 09-94 09-98 11-01 11-02 11-04 11-05 11-12 11-19 11-35 11-98 11-99 13-04 13-08 13-26 13-32 13-35 13-98 15-04 15-05 15-15 15-18 15-19 15-25 15-35 15-55 15-97 17-02 17-06 17-08 17-20 17-22 17-26 17-35 17-52 17-73 17-75 17-99 19-11 19-17 19-18 19-28 19-30 19-31 19-32 19-35 19-88 21-11 21-16 21-AJ 21-35 21-39 21-41 21-48 21-75O 21-121 Legend: N/A M M I I I I II M I I I I M M I I II I I I M M I M I II M I M 1 M I II M M I I M I M I II M M I I M 1 9 6 2 3 1 2 4 5 1 19 13 6 7 4 8 8 32 22 10 4 5 15 18 19 25 37 55 12 39 6 8 20 4 26 55 2 73 2 23 11 17 18 28 30 15 32 66 88 11 16 20 79 39 41 4 4 121 Number and size of contacts 23 22D 20 16 12 12 coax 10 8 8 coax power power 8 triax 4 or power twinax 1 Grounded insert availability** P S X X X X Quadrax available X 9 6 2 3 1 2 X 4 5 1 19 13 6 7 4 X 8 6 2 32 22 10 4 14 18 19 22 37 5 1 X 3 55 8 4 38 1 6 8 16 X X X X X X X X X X 4 2 2 26 55 73 2 21 10 14 1 2 11 4 26 29 2 1 12 X X X 2 4 1 X X 2 X 32 66 88 11 16 X 18 2 X 79 37 41 2 4 4 or 4 X X X 121 High-Density arrangements Only grounded insert version available Grounded version (metallic insert for use with coaxial, twinax or quadrax contacts, for receptacle only). O 21-75 delivered with TWINAX contacts when ordered under the Mil P/N For CTV : 15-25& 17-20 arrangements not available 14 * ** Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV TECHNICAL CHARACTERISTICS INSERT ARRANGEMENTS Service Arrangements Class 23-06 23-14 23-21 23-35 23-53 23-54 23-55 23-151 25-04 25-07 25-08 25-11 25-1A 25-17 25-19 25-20 25-24 25-26 25-29 25-35 25-37 25-41 25-43 25-46 25-61 25-92 25-187 25-F4 Legend: ** M I II M I M I I M M N M I N I I I M I I I I I M M Total number of contacts 6 14 21 100 53 53 55 151 56 99 8 11 8 42 19 30 24 25 29 128 37 41 43 46 61 101 187 66 Grounded insert Quadrax 8 triax availability** available 10 8 4 8 coax or power power power P S twinax 6 X X X Number and size of contacts 23 22D 20 16 12 12 coax 14 21 X X X X 100 53 40 9 4 55 151 48 8 97 2 8 2 9 4 4 36 6 X 19 10 X X 13 12 16 X 4* 3 12 5 X 4 29 X 128 22 3 23 40 61 37 11 20 4 92 9 49 13 2* 3 2 X 187 4 High-Density arrangements Grounded version (metallic insert for use with coaxial, twinax or quadraxcontacts, for receptacle only). TECHNICAL CHARACTERISTICS CODING - POLARIZATION To avoid cross-plugging problems in applications requiring the use of more than one MIL-DTL-38999 III connector of the same size, alternate key-rotations are available as indicated in the accompanying chart. As shown in the diagram below, the secondary keys rotate clockwise from the major one. Shell size 9 In the reference system, the polarizationis shown by the letters N, A, B, C, D or E. 11 13 and 15 17 and 19 21 23 and 25 Tri-StartTM TV-CTV Coding identification letter N A B C D E N A B C D E N A B C D E N A B C D E AR or AP BSC 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 BR or BP BSC 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 CR or CP BSC 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 DR or DP BSC 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 15 Amphenol Tri-StartTM TV-CTV STANDARD RANGE TV METALLIC SHELLS ALUMINIUM SHELLS Presentation Aluminium TV shell connectors are used in professional and international electronic defense programs in standard environmental conditions. Main characteristics * Material shell: Aluminium alloy. * Shell to shell continuity: Max resistance - 1 m for F class - 2.5 m for W-Z class * Shell to contact continuity, for grounded inserts versions: Max resistance 10 m * EMI shielding effectiveness: * Standard MIL wiring tools - 1GHz: -85 dB (Class F, W-Z) - 10 GHz: -65 dB (Class F); -50 dB (Class W-Z) MARINE BRONZE SHELLS Presentation TVS-B bronze connectors are not defined in MIL-DTL-38999-III standard but they are based on its requirements. TVS-B connectors conform to the European standard CECC 75.201.002. (deviation F485 to be added for plug) This series was initially selected by the British Navy for a new generation of ships. By extension a lot of the NATO Navy choose this series as a standard of interconnection. Main characteristics * Material shell: Nickel aluminum bronze DGS 1043. * EMI shielding effectiveness: < -65 dB from 100 MHz to 10 GHz. STAINLESS STEEL SHELLS Presentation Stainless steel shell connectors are used in high temperature environments and in harsh vibration conditions. They provide FIREWALL capabilities. Main characteristics * Thermosetting insert * Shell to shell continuity: Max resistance - 10 m for Class K - 1 m for Class S * EMI shielding effectiveness: 16 - 1 GHz: -65 dB (Class K); -85 dB (Class S) - 10 GHz: -45 dB (ClassK); -65 dB (Class S) Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV STANDARD RANGE TV METALLIC SHELLS S 2 PLACES R1 S 2 PLACES 2 PLACES R1 R2 2 PLACES 2 PLACES OVERALL DIMENSIONS / METALLIC VERSIONS 23.11 0.13 +0.15 22.99 0 L M SQUARE FLANGE RECEPTACLE M TVP00RW TVP00ZN TVPS00RF TVPS00RB TVPS00RK TVPS00RS JD38999/20W JD38999/20Z JD38999/20F B THREAD CLASS 2A 0.1P-0.3L-TS L R2 2 PLACES JD38999/20K JD38999/20S T V THREAD METRIC V THREAD METRIC Z T 4 PLACES TT 4 PLACES TT Z1 B 0.13 M 4 PLACES Shell size MIL-DTL-38999 Series III Amphenol A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 L Max (mm) M +0.00 -0.13 (mm) R1 (mm) 11.91 11.91 11.91 11.91 11.91 11.91 12.70 12.70 12.70 20.83 20.83 20.83 20.83 20.83 20.83 20.07 20.07 20.07 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 R2 (mm) S 0.25 (mm) T +0.20 -0.13 (mm) 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 23.83 26.19 28.58 30.96 33.32 36.53 39.67 42.88 46.02 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 0.13 M Z1 Max (mm) TT +0.20 -0.13 (mm) V thread metric 3.89 3.89 3.89 3.89 3.89 3.89 4.65 4.65 4.65 5.49 4.93 4.93 4.39 4.93 4.93 4.93 6.15 6.15 M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g For panel drilling, see section "Printed Circuit Board Connectors" For PCB contacts stickout, see section "Printed Circuit Board Connectors" Maximum panel thickness for rear panel mounting:5mm from size 21 to 25 5,8mm from size 9 to 19 PANELPANEL THICKNESS THICKNESS 1,57 MIN, 3,18 MAX 1.57 MIN 3.18 MAX JAM NUT RECEPTACLE TV07RW TV07ZN TVS07RF TVS07RB TVS07RK TVS07RS JD38999/24W JD38999/24Z JD38999/24F JD38999/24K JD38999/24S A A B THREAD CLASS 2A 0.1P-0.3L-TS Shell size MIL-DTL-38999 Series III Amphenol A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 B C C T N MAX Size 9/11 = 9,45 Size 13/25 = 9,37 SHELL SIZE TO 9/11 9.11 MAX SHELL SIZE TO 13/25 9.04 MAX K REF V V THREAD 2,31 MAX METRIC H HS S Size 9/11 = 22,12 2.31 MAX Size 13/25 = 22,30 Shell sizes 9/11 - 22.12 ShellAsizes 13/25 - 22.30 C +0.10 Max -0.15 (mm) (mm) 16.53 19.07 23.82 26.97 30.15 33.32 36.50 39.67 42.85 30.45 35.20 38.38 41.55 44.73 49.50 52.65 55.85 59.00 H Hex +0.43 -0.41 (mm) S +/-0.4 (mm) V thread metric Hex nut max torque N.m 22.23 25.40 30.17 33.32 36.52 39.67 42.87 46.02 50.80 26.97 31.75 34.93 38.10 41.28 46.02 49.23 52.37 55.58 M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g 4.1 5.3 6.9 8.6 9.8 10.9 12.7 13.8 15 For panel drilling, see section "Printed Circuit Board Connectors" For PCB contacts stickout, see section "Printed Circuit Board Connectors" Tri-StartTM TV-CTV 17 Amphenol Tri-StartTM TV-CTV STANDARD RANGE TV METALLIC SHELLS STRAIGHT PLUG TV06RW TV06ZN TVS06RF TVS06RB TVS06RK TVS06RS JD38999/26W JD38999/26Z JD38999/26F 31.34 MAX JD38999/26K JD38999/26S Q Q (F485) V 9.12 MAX B + 0.1 15.01- 0.0 Shell size MIL-DTL-38999 Series III Amphenol A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS Q Max (mm) V thread metric (mm) Q (F485)* (mm) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 21.82 24.62 28.98 32.16 35.33 38.10 41.28 44.45 47.63 M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g 21.1 23.8 28.2 31.4 36.5 39.3 42.5 45.3 48.4 * Conforms to CECC 75.201.002 (coupling nut for arctic gloves) 18 Tri-StartTM TV-CTV Amphenol NOTES Tri-StartTM TV-CTV Tri-StartTM TV-CTV 19 Amphenol Tri-StartTM TV-CTV STANDARD RANGE CTV COMPOSITE SHELLS PRESENTATION Qualified to MIL- DTL- 38999 standard, the Amphenol composite Tri-Start Connectors offers a lightweight corrosion resistant connector with the same high performance features as its metal counterpart. It also includes the following features: * Lightweight (20 - 40% weight savings vs. aluminium, 60 - 70% weight savings vs stainless steel) * High Corrosion resistance * Durability Note: Coupling nuts and hexagonal nuts are delivered without plating (black) MAIN CHARACTERISTICS * Shell to shell continuity: Max resistance - Class M: 3 m - Class J: 3 m * Durability: - 500 cycles with standards contacts - 1500 cycles with "H" type SAE AS39029 pin contacts and "J" type SAE AS39029 socket contacts * Ozone exposure: MIL-DTL-38999 4.5.28 / EIA 364.14. * Fungus resistance conforms to: MIL-STD-810, method 508. * EMI shielding effectiveness: - 1 GHz: -85 dB ( Class M, J) - 10 GHz: -65 dB (Class M), -50 dB (Class J) OVERALL DIMENSIONS - COMPOSITE VERSIONS S 2 PLACES R1 2 PLACES R2 2 PLACES 23.11 0.13 SQUARE FLANGE M B THREAD RECEPTACLE CLASS 2A CTVP00RW CTVPS00RF 23.11 L 0.13 M JD38999/20J B THREAD 0.1P-0.3L-TS CLASS 2A JD38999/20M 0.1P-0.3L-TS L S 2 PLACES R1 2 PLACES R2 2 PLACES T Z1 V THREAD METRIC V THREAD METRIC T 0.13 M 4 PLACES TT TT Z1 0.13 M 4 PLACES Shell size MIL-DTL-38999 Series III A B C D E F G H J Amphenol 9 11 13 15 17 19 21 23 25 B Thread (inches) L Max (mm) M +0.00 -0.13 (mm) R1 (mm) R2 (mm) S 0.25 (mm) T +0.20 -0.13 (mm) Z1 Max (mm) TT +0.20 -0.13 (mm) V thread metric .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 13.055 13.055 13.055 13.055 13.055 13.055 13.843 13.843 13.843 19.685 19.685 19.685 19.685 19.685 19.685 18.923 18.923 18.923 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 23.83 26.19 28.58 30.96 33.32 36.53 39.67 42.88 46.02 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 5.03 5.03 5.03 5.03 5.03 5.03 5.79 5.79 5.79 5.49 4.93 4.93 4.39 4.93 4.93 4.93 6.15 6.15 M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g For panel drilling, see section "Printed Circuit Board Connectors" For PCB contacts stickout, see section "Printed Circuit Board Connectors" Maximum panel thickness for rear panel mounting: 5,8mm from size 9 to 19 5mm from size 21 to 25 20 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV STANDARD RANGE CTV COMPOSITE SHELLS JAM NUT RECEPTACLE CTV07 RW CTVS07 RF JD38999/24J JD38999/24M A PANEL THICKNESS PANEL 1.57 MIN THICKNESS 3.18 MAX 1.57 MIN 3.18 MAX C C T SHELL SIZE TO 9/11 SHELL 9.11 SIZE TOMAX 9/11 SHELL 9.11 MAX SIZE TO 13/25 SHELL 9.04 SIZE TOMAX 13/25 9.04 MAX A V THREAD METRIC V THREAD METRIC 2.31 MAX 2.31 MAX B THREAD CLASS 2A B THREAD 0.1P-0.3L-TS CLASS 2A 0.1P-0.3L-TS H H S S Shell sizes 9/11 - 22.12 Shell sizes 9/11 - 22.12 Shell sizes 13/25 - 22.30 Shell sizes 13/25 - 22.30 Shell size MIL-DTL-38999 Series III A B C D E F G H J Amphenol 9 11 13 15 17 19 21 23 25 A +0.00 -0.25 (mm) 16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.00 43.41 B Thread (inches) C Max (mm) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 30.45 35.20 38.38 41.55 44.73 49.50 52.65 55.85 59.00 H Hex +0.43 -0.41 (mm) 22.23 25.40 30.17 33.32 36.52 39.67 42.87 46.02 50.80 S +0.28 -0.25 (mm) 26.97 31.75 34.92 38.10 41.28 46.02 49.22 52.37 55.57 V thread metric Hex nut max torque N.m M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g 4.1 5.3 6.9 8.6 9.8 10.9 12.7 13.8 15 For panel drilling, see section "Printed Circuit Board Connectors" For PCB contacts stickout, see section "Printed Circuit Board Connectors" 31.34 MAX 31.34 MAX B THREAD STRAIGHT PLUG CTV06 RW CTVS06 RF B THREAD Q JD38999/26J JD38999/26M V THREAD 9.12 MAX V THREAD 9.12 MAX + 0.08 15.01 - 0 Shell size MIL-DTL-38999 Series III A B C D E F G H J Tri-StartTM TV-CTV Amphenol 9 11 13 15 17 19 21 23 25 + 0.08 15.01 - 0 B Thread 0.1P-0.3L-TS-2B (inches) Q Max (mm) V thread metric (mm) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 21.82 24.99 29.39 32.49 35.69 38.48 41.68 44.88 47.98 M12x1-6g M15x1-6g M18x1-6g M22x1-6g M25x1-6g M28x1-6g M31x1-6g M34x1-6g M37x1-6g 21 Amphenol Tri-StartTM TV-CTV STANDARD RANGE Square flange receptacle rear panel mounting R1 PANEL DRILLING FOR COMPOSITE AND METALLIC RECEPTACLES Square flange receptacle front panel mounting R1 R2 OD A V B G V Shell size 22 OC 4OW OD AAD 4OW Jam nut receptacle rear panel mounting MIL-DTL-38999 Series III Amphenol R1 (mm) A B C D E F G H J 9 11 13 15 17 19 21 23 25 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 R2 (mm) V Mini (mm) OD Min (mm) ODD Min (mm) OW +0 -0.25 (mm) G Mini (mm) OC +0.25 0 (mm) B +0 -0.25 (mm) 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 24.60 27.00 30.20 33.30 36.50 39.30 42.50 45.70 48.80 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47 13.11 15.88 19.05 23.01 25.81 28.98 32.16 34.93 37.69 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.81 3.81 27.80 32.60 36.00 39.60 43.30 47.00 50.60 54.20 59.70 17.60 20.96 25.65 28.83 32.01 35.18 38.35 41.53 44.70 16.70 19.59 24.26 27.56 30.73 33.91 37.08 40.26 43.43 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV STANDARD RANGE PRINTED CIRCUIT BOARD CONNECTORS O A (mm) Minimum hole diameter CI Version Contacts LI Version Gold PCB contacts Tinned PCB contacts Gold PCB contacts Tinned PCB contacts Size 22D 0.8 0.9 1.0 1.1 Size 20 1.0 1.1 1.0 1.1 STANDARD PCB - TAIL DIMENSIONS AT THE REAR OF RECEPTACLES (IN MM) L1 Pin L2 L1 Socket L2 min Max min Max min Max min Max CI Contacts (5 mm tail length) TV 07 - CTV 07 TVP 00 CTVP 00 09 & 11 13 to 25 09 to 19 21 to 25 09 to 19 21 to 25 10.13 9.95 11.55 12.31 12.71 13.47 11.07 10.89 12.39 13.15 13.52 14.28 15.03 14.85 16.45 17.21 17.61 18.37 16.17 15.99 17.49 18.25 18.62 19.38 9.93 9.75 11.35 12.11 12.51 13.27 10.87 10.69 12.19 12.95 13.32 14.08 14.83 14.65 16.25 17.01 17.41 18.17 15.97 15.79 17.29 18.05 18.42 19.18 LI Contacts (8.5 mm tail length) TV 07 - CTV 07 TVP 00 CTVP 00 09 & 11 13 to 25 09 to 19 21 to 25 09 to 19 21 to 25 10.13 9.95 11.55 12.31 12.71 13.47 11.07 10.89 12.39 13.15 13.52 14.28 18.53 18.35 19.95 20.71 21.11 21.87 19.67 19.49 20.99 21.75 22.12 22.88 9.93 9.75 11.35 12.11 12.51 13.27 10.87 10.69 12.19 12.95 13.32 14.08 18.33 18.15 19.75 20.51 20.91 21.67 19.47 19.29 20.79 21.55 21.92 22.68 For HD38999 inserts, the CI contacts dimensions are valid for pin contacts only. Consult us for socket contacts and pin contact LI version. Tri-StartTM TV-CTV 23 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 09 11 24 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 13 Tri-StartTM TV-CTV 25 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 15 26 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 15 17 Tri-StartTM TV-CTV 27 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 17 28 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 19 Tri-StartTM TV-CTV 29 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 21 30 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 21 Tri-StartTM TV-CTV 31 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 23 32 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 23 Tri-StartTM TV-CTV 33 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 25 34 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 25 Tri-StartTM TV-CTV 35 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 25 36 Tri-StartTM TV-CTV Amphenol STANDARD RANGE Tri-StartTM TV-CTV PRINTED CIRCUIT BOARD CONNECTORS 25 Tri-StartTM TV-CTV 37 Tri-StartTM TV-CTV STANDARD RANGE Amphenol PRINTED CIRCUIT BOARD CONNECTORS 25 38 Tri-StartTM TV-CTV Amphenol NOTES Tri-StartTM TV-CTV Tri-StartTM TV-CTV 39 Amphenol Tri-StartTM TV-CTV EXTENDED RANGE REDUCED FLANGE NEW MAIN CHARACTERISTICS * More density on panel 37% average footprint surface reduction * More space inside the box: 36% average reduction of panel/PCB distance * Lighter: 30% average lighter than standard 38999 stand off receptacle * Derivated from MIL-DTL-38999 series III version * Mates with standard MIL-DTL-38999 series III plugs and caps * Reduced flange receptacles are available in crimp version, with PC Tail contacts, as well as in stand off version * For jam nut (TV07) configurations SMALLER DIMENSIONS Crimp Contacts 38999 Series III Standard PC Tail Contacts 38999 Series III Reduced Flange 38999 Series III PC Tail 5 + 0,1 (CI) 8,5 + 0,1 (LI) PC Tail Contacts & Stand Off 38999 Series III Reduced Flange PC Tail 5 + 0,1 (CI) 8,5 + 0,1 (LI) 38999 Series III Stand Off 3,6 mm (CI) 7,2 mm (LI) 38999 Series III Reduced Flange Stand Off 3,7 mm (CI) 7,2 mm (LI) Y X X Y Deviation: F312/F311* with safety castel nut X Y Deviation: F059/F058* with safety castel nut * with safety castel nut FOOTPRINT AND WEIGHT SAVING Sizes Footprint Reduction (mm2) 9 43% 11 46% 13 43% 15 36% 17 26% 19 37% 21 36% 23 34% 25 30% Example of Weight Reduction : 38999 Series III stand off version: TV07WCI13-35P F459 = 31.46 g 38999 Series III Reduced flange stand off version : TV07WCI13-35P F259 = 19.49 g > The #13 Reduced flange stand off version is 38 % lighter than 38999 Series III standard stand off version. TOOLS 40 Sizes Tools PN 9 809681 11 809682 13 809683 15 809684 17 809685 19 809686 21 809687 23 809688 25 809689 Tri-StartTM TV-CTV Amphenol EXTENDED RANGE Tri-StartTM TV-CTV STAND OFF RECEPTACLES MAIN CHARACTERISTICS * Receptacles with stand-off flange shells, for attachment to printed circuit boards. * Tin plated contacts. Lead free versions available. * Available in wall mount (TVP00) and jam nut (TV07) configurations. * Prevent any mechanical stress on the contact tails. * Provide grounding continuity between PCB and box. * Increase reliability and resistance to shocks and vibrations * For composite versions, please consult us. Deviations : * Lead Tinned Stand Off : F459 * Silver Tinned Stand Off : F459LF * Silver Copper Tinned Stand Off : F459LFC For other versions, please consult us OVERALL DIMENSIONS Jam nut receptacle (size 9 and 11) Square flange receptacle (size 9 to 25) Jam nut receptacle (size 13 to 25) Shell Size S 0.25 (mm) R2 (mm) S1 0.4 (mm) oW (mm) 9 23.83 16.00 27.0 20.50 11 26.19 18.26 31.8 25.20 13 28.58 20.62 34.9 25.25 15 30.96 23.01 38.1 28.42 17 33.32 26.10 41.3 31.42 19 36.53 27.24 46.0 35.03 21 39.67 29.36 49.2 37.82 23 42.88 31.75 52.4 41.12 25 46.02 34.93 55.6 44.30 Contact us for more detailed information. For ordering informations, see section "Printed Circuit Board Connectors" Tri-StartTM TV-CTV 41 Amphenol Tri-StartTM TV-CTV EXTENDED RANGE TVS-Y / TVS-YN HERMETIC RECEPTACLES PRESENTATION TVS-Y and TVS-YN hermetic receptacles are dedicated to applications requiring low air leakage or high protection facing to contamination. MAIN CHARACTERISTICS * 9 shell sizes (stainless steel) * Solder pin contacts in nickel alloy * Contact plating in active zone: Gold * Glass insert * Air leakage < 1.10 -7 cm3/s under 1 bar of differential pressure * Passivation or nickel plating OVERALL DIMENSIONS - HERMETIC VERSIONS Square flange receptacle TVPS02Y JD38999/21Y TVPS02YN JD38999/21N S R1 2.36+0.15 0 B Panel drilling R3 4OW R4 R2 0.13 M TT OY 23.19+0.28 0 R2 R1 S 0.13 M T V 6.35 MAX Shell size 42 MIL-DTL-38999 Series III Amphenol A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 R1 (mm) R2 (mm) S 0.25 (mm) T +0.20 -0.13 (mm) TT +0.20 -0.13 (mm) OW +0 -0.25 (mm) R3 (mm) R4 (mm) V Mini (mm) OY Mini (mm) 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 23.83 26.19 28.58 30.96 33.32 36.53 39.67 42.88 46.02 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 3.91 5.49 4.93 4.93 4.39 4.93 4.93 4.93 6.15 6.15 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.81 3.81 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 38.10 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 24.60 27.00 31.50 34.50 28.00 40.50 44.00 47.00 50.00 16.66 20.22 23.42 26.59 30.96 32.94 36.12 39.29 42.47 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV EXTENDED RANGE Jam nut receptacle TVS07Y TVS07YN TVS-Y / TVS-YN HERMETIC RECEPTACLES C L 1.57 MINI 3.18 MAX JD38999/23Y JD38999/23N Panel drilling OY O KK Z V B 5.08 MAX K REF Shell size MIL-DTL-38999 Series III Amphenol Socapex A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 Solder mounting receptacle H S C Maxi (mm) H/plats +0.043 -0.41 (mm) L Maxi (mm) OKK +0.28 0 (mm) B 0.25 (mm) V Mini (mm) OY Mini (mm) Z +0 -0.25 (mm) Hex nut max torque value N.m 30.45 35.20 38.38 41.55 44.73 49.50 52.65 65.85 59.00 22.23 25.40 30.18 33.32 36.53 39.67 42.80 46.02 50.80 9.07 9.07 9.07 9.07 9.07 9.68 9.68 9.68 9.68 16.31 19.46 22.66 25.86 29.01 32.21 35.36 38.56 41.71 26.97 31.75 34.93 38.10 41.28 46.02 49.23 52.37 55.58 27.80 32.60 36.00 39.60 43.30 47.00 50.60 54.20 59.70 17.78 20.96 25.65 28.83 32.01 35.18 38.35 41.53 44.70 16.99 19.53 24.26 27.53 30.68 33.86 37.06 40.01 43.41 4.1 5.3 6.9 8.6 9.8 10.9 12.7 13.8 15 L TVSIYJD38999/25Y TVSIYNJD38999/25N O GG Panel drilling OY M 0.79+0.15 -0.13 O KK V B 9.53 MAX Shell size MIL-DTL-38999 Series III Amphenol A B C D E F G H J 9 11 13 15 17 19 21 23 25 B thread Class 2A 0.1P-0.3L-TS (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 V OGG +0.28 -0.25 (mm) OKK +0.03 -0.13 (mm) L +0.28 -0 (mm) M +0.15 -0.13 (mm) V Mini (mm) OY Mini (mm) 19.05 21.44 24.61 27.79 30.94 33.32 36.53 39.70 42.88 17.07 19.84 23.01 26.19 29.36 31.75 34.93 38.10 41.28 20.47 20.47 20.47 20.47 20.47 20.47 20.47 21.29 21.29 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.96 3.96 24.60 27.00 31.50 24.50 38.00 40.50 44.00 47.00 50.00 17.60 20.40 23.50 26.70 29.90 32.30 35.50 38.60 41.80 POLARIZATION MS Code SN SA SB SC SD SE Tri-StartTM TV-CTV Socket contact Amphenol code S (normal) H J L N T MS Code PN PA PB PC PD PE Pin contact Amphenol code P (normal) G I K M R 43 Amphenol Tri-StartTM TV-CTV EXTENDED RANGE LANYARD RELEASE PLUGS (BREAKAWAY CONNECTORS) PRESENTATION Amphenol Breakaway Connectors provide unequaled performance in environments requiring instant disengagment. Designed to provide quick disconnect of a connector plug and receptacle with an axial pull on the lanyard, the "Breakaway" Fail Safe connector family offers a wide range of electrical and mechanical features: * * * * * * Compatible/intermateable with MIL-DTL-38999 series III receptacles Quick disconnect between plug and receptacle and damage free separation Up to 15 misalignement for instant desengagement Tread coupling (tri start connector) Other shell size and arragements available in MIL-DTL-38999 standard lanyard versions 2 arrangements available for MIL-STD-1760 applications : Y J 11 / 25N11 25-11 N 2 9 20 10 power POLARIZATION 10 20 MS Code SN SA SB SC SD SE J 20 / 25N20 25-20 N 13 3 4 16 8 twinax 12 coax Socket contact Amphenol code S (normal) H J L N T MS Code PN PA PB PC PD PE Pin contact Amphenol code P (normal) G I K M R OVERALL DIMENSIONS Lanyard release plugs - MIL-STD-1760 TVFBRW JD38999/31W O42.5 MAX ACCESSORY 58.5 MAX 3.2 MAX 6.3 RAD 51 MAX 7.11 MAX 42.4 MAX LENGTH "X" See chart A TABLE A Length "X" MIL.STD 1760 coding mm A* B* C* D E F G H J K M X 102 115 127 140 153 166 178 191 407 229 254 432 Other lengths are also available under TVFBRW proprietary designation. Consult us. * for TV FBRW only 44 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV EXTENDED RANGE LANYARD RELEASE PLUGS (BREAKAWAY CONNECTORS) Lanyard release plugs 885565...P 915565...P 885565...S 915565...S 9.12 Max 9.50 Max Standard version (ordering information, see section "How to Order") D O 12.70 0.79 JD38999/29W JD38999/29F JD38999/30W JD38999/30F B 45.24 Max 60.33 Max Length X See chart II Metric V Thread TABLE I TABLE II Arrangement code Insert arrangement 04 06 07 08 10 11 13 14 18 19 20 21 22 23 27 28 29 30 31 37 38 39 40 47 48 49 50 51 57 58 59 60 61 66 67 68 69 70 71 72 73 11-04 11-35 11-98 11-02 13-4 13-08 13-98 13-35 15-5 15-19 15-35 15-97 15-18 15-15 17-06 17-08 17-26 17-35 17-99 19-11 19-28 19-32 19-35 21-11 21-16 21-35 21-41 21-39 23-21 23-35 23-53 23-55 23-54 25-19 25-29 25-35 25-43 25-61 25-04 25-24 25-46 Tri-StartTM TV-CTV Blue band Shell size MIL-DTL-38999 Series III Amphenol B C D E F G H J 11 13 15 17 19 21 23 25 Metric Max B Max (mm) D Max (mm) M15X1.0-6G M18x1.0-6g M22X1.0-6G M25X1.0-6G M28X1.0-6G M31X1.0-6G M34X1.0-6G M37X1.0-6G 46.89 50.09 52.81 56.01 58.45 62.79 65.89 68.71 28.17 31.75 34.93 38.10 41.28 44.45 47.63 50.08 TABLE III Length "X" (mm) Code MS/Amphenol 102 115 127 140 153 166 178 191 203 216 229 242 254 267 280 293 305 318 331 356 381 407 432 458 A B C D E F G H I J K L M N P R S T U V W X Y Z 45 Amphenol Tri-StartTM TV-CTV EXTENDED RANGE THRU-BULKHEAD RECEPTACLES TVB thru-bulkhead receptacles are used for the feed through of circuits on bulkheads or panels. * Intermateable with MIL-DTL-38999 Series III connectors * 9 shell sizes * Interfacial seal on male side * Olive drab cadmium or nickel plating * Coding possibility HOW TO ORDER Thru-bulkhead Receptacles TVB W 15 35 PS N F467 Shell Material and finish W: Olive drab cadmium plated aluminium F: Electroless nickel plated aluminium B: Marine bronze ZN: Black Zinc Nickel Shell size and insert arrangements: see section "Insert Arrangements" Contact type PS: Pin & Socket Coding N, A, B, C, D, E Deviation F467: Drilled and tapped mounting holes (recommended) For further information, please consult us. RANGE DERIVATED RECEPTACLES WITH ENHANCED SEALING TV07 ETC receptacles with enhanced sealing are derived from the standard MIL-DTL-38999 Series III receptacles. The inserts have been modified to ensure an air leakage of < 1.10-6cm3/s under 1 bar of differential pressure. * Intermateable with MIL-DTL-38999 Series III connectors * 9 shell sizes * Solder or PCB pin contacts. Socket contacts available upon request HOW TO ORDER Series TV 07 W ET C 15 35 P A Shell Type Jam nut receptacle: 175C (O.D. cadmium): 07 200C (nickel, bronze): S07 Shell material, finish and contact type W: Olive drab cadmium plated aluminium F: Electroless nickel plated aluminium B: Marine bronze Z: Green zinc cobalt plated aluminium ZN: Black zinc nickel plated aluminium Enhanced sealing Contact termination C: Solder contacts CI: Standard PCB contacts LI: Long tail PCB contacts Shell size and insert arrangements: see section "Insert Arrangements" Contact type P: Pin Coding Blank for normal, A, B, C, D, E For further information, please consult us. 46 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV EXTENDED RANGE INTEGRATED BACKSHELLS MAIN CHARACTERISTICS * All in one product * Time saving during order and installation * Space and weight saving * Deviation : F472 Available on plugs and receptacles, these 2 in 1 connectors/band backshells provide a high EMI protection with a quick, easy and cost effective cabling process. They are low profile, with enhance sealing level and allow the use of macro and micro bands, as well as straight or right angle heat shrink moulded pieces. The design of the shells makes them compatible with over moulding process. For further information, please consult us. EXTENDED RANGE MIL-DTL-38999 SERIES III OPTICAL CONNECTORS TVOP The TVOP connector is an optical version of the MIL-DTL-38999 series III connector, which uses standard 2.5 mm telecom optical termini in dedicated high precision inserts. It is designed to provide high level of performance and reliability, and cost effective solution for outdoor and indoor applications. * 1 to 8 channels * Available in multimode, singlemode PC and singlemode APC * 0.5 dB typical Insertion Loss in multimode and singlemode Insert arrangements 11-2 13-4 17-8 STARTOP The STARTOP connector is made of standard MIL-DTL-38999 electrical connectors, using size 16 MIL-PRF-29504 optical termini. Hybrid versions (electrical and optical) are available, for further details please consult us. * 1 to 8 channels * Available in multimode * 0.8 dB typical Insertion Loss Insert arrangements 11-02 13-04 15-05 17-08 For further details, please consult the EWOC catalog (DOC-000503-ANG). Tri-StartTM TV-CTV 47 Amphenol Tri-StartTM TV-CTV ACCESSORIES PROTECTIVE CAPS 23mm MAX EM I TU RE M O IS DU ST * For receptacles & plugs * IP 68 (permanent sealing) W AT ER STANDARD METALLIC CAPS 20.24 MAX A B 29.62 30mm MAX MAX A Protection cap for receptacles equipped with metallic chain, nylon cord or stainless steel rope Protection cap for plugs equipped with metallic chain, nylon cord or stainless steel rope N 105 5 160 5 +0.1 O 3.9 +0 Cap type Metallic chain length (mm) Bouchon d'embase a collerette carree152 BEC/BER for receptacle BF for plug Nylon cord length (mm) Bouchon de+ 105 fiche MIL-DTL-38999 Series III A B C D E F G H J 127 127 - 127 20.24 MAX Shell size Stainless steel rope length (mm) 160 A A thread 0.1P-0.3L-TS Class 2B Amphenol (inches) 9 B .6250 11 .7500 105 5 13 .8750 15 1.0000 17 1.1875 19 1.2500 21Bouchon d'embase a 1.3750 collerette ronde 23 1.5000 25 1.6250 C Dia Min (mm) 17.86 21.44 25.81 28.98 32.16 36.27 38.51 41.68 44.86 B Dia Max (mm) 22.23 25.40 28.58 31.75 36.53 38.10 41.28 44.45 47.63 N Dia Max (mm) 22.73 25.40 29.74 32.99 36.47 39.19 42.42 45.39 48.62 ORDERING INFORMATION Standard Metallic Caps B EC N TV W 15 Protection cap type EC: For square flange receptacle ER: For jam nut receptacle F: For plug Wire type N: Nylon cord Blank for metallic chain R: Jacketed stainless steel rope RO: Jacketed stainless steel rope with washer end (only for plug) Connector type Finish B: Bronze F: Electroless nickel plated, aluminium version W: Olive drab cadmium plated aluminium version Z: Green zinc cobalt plated aluminium ZN: Black zinc Nickel aluminium from Amphenol Europe Corresponding connector shell size: 09/11/13/15/17/19/21/23/25 For stainless steel caps, please consult us : RoHS compliant 48 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV ACCESSORIES * For receptacles * IP67 (1m, 1 hour sealing) W AT ER NEW DU ST RUBBER CAPS PROTECTIVE CAPS Sizes OA Max 9 11 13 15 19,25 22,55 25,95 28,75 +0,25 0 17,86 22,63 25,81 30,24 OB Max OC Max 13,85 17,2 20,6 23,4 D Max 140 140 140 140 HOW TO ORDER Cap Series RC 00 N TV 9 Protection cap type 00: For square flange receptacle 07: For jam nut receptacle 01: For line receptacle Wire type N: Nylon cord Connector type Shell size: 09/11/13/15/17/19 ACCESSORIES PROTECTIVE CAPS - TERMINATION TYPE 4.1 +0.1 For both standard Metallic Caps & Rubber Caps C Termination of the chain, rope (RO type) or cord for jam nut receptacle protection caps 4.1 +0.1 4.1 Termination of the cord or rope (R type) for square flange receptacle protection caps 4.1 Termination of the chain for square flange receptacle and plug protection caps 4.1 +0.1 Termination of the cord for plugs protection caps 4.1 +0.1 Tri-StartTM TV-CTV 49 Amphenol Tri-StartTM TV-CTV ACCESSORIES BACKSHELLS SHIELDING TV-35: BAND BACKSHELL FOR SHIELDING * Full 360 shield termination * Available with different cabling chambers * Easy maintenance or repairability * Sealing ensured by straight or right angled heat-shrink molded piece * Right angle version: TV SBC TV NSA: HIGH LEVEL OF EMI/RFI PROTECTION * E lectrical continuity between cable and connector by clamping the braid with a screwing system * Free inner ring to avoid twisting of the braid when screwing * Sealing ensured by straight or right angle heat-shrink molded piece M85049/88: BAND LOCK ADAPTOR * MIL standardized band backshell * Full 360 termination * Sealing ensured by straight or right angle heat-shrink molded piece * Right angle and 45 versions available SEALING TV NSD: ADAPTER FOR HEAT-SHRINK MOLDED PIECE MECHANICAL RETENTION M85049/38 - M85049/38S: STRAIN RELIEF CLAMP * MIL standardized strain relief clamp * Mechanical retention of the cable * Easy maintenance or repairability * Self locking option available M85049/19: NON-ENVIRONMENTAL EMI/RFI BACKSHELL * 360 screen termination * Strain relief cable holding mechanism For more detailed information, consult our Backshell catalog (E118) 50 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV ACCESSORIES OTHER ACCESSORIES DUMMY RECEPTACLES * Dummy receptacles match all plug types with any shell coding (N, A, B, C, D, E) * Dimensions are identical to the front part of TVP00 receptacles * A rubber washer ensures correct sealing of mated connectors * Specific polarized versions are available on request How to order - Amphenol designation Dummy receptacle SE 00 TV W 11 Shell type 00: derived from the TV square flange receptacle Series Finish W: Olive-drab cadmium plated F: Electroless nickel plated B: Marine Bronze ZN: Black Zinc Nickel plated Shell size 09/11/13/15/17/19/21/23/25 : RoHS compliant OLDING SUPPORT EQUIPPED WITH OLIVE DRAB CADMIUM DUMMY RECEPTACLES H REFERENCE: 809 931 Size 25 receptacle all codings Size 23 receptacle all codings Size 21 receptacle all codings Size 19 receptacle all codings Size 17 receptacle all codings Size 15 receptacle all codings Size 13 receptacle all codings Size 11 receptacle all codings Size 9 receptacle A, B, D codings Size 9 receptacle N, C, E codings PLASTIC DUST CAPS Tri-StartTM TV-CTV Shell size Plastic dust caps for plug Plastic dust caps for receptacles 9 606062 606061 11 805414 606062 13 606073 606063 15 606066 606064 17 606067 606065 19 606068 606066 21 606070 606067 23 606079 606068 25 606079 606069 51 Amphenol Tri-StartTM TV-CTV ACCESSORIES OTHER ACCESSORIES CRIMP CONTACTS Pin contacts Contact size Proprietary No 00 Signal and Power Socket contacts Military No Proprietary No Refer to catalog contacts (DOC-000081-ANG) Military No Refer to catalog contacts (DOC-000081-ANG) 4 900007 - 900047 - 8* 900197 900198** - 900217 - 12 900005 M39029/58-365 900045 M39029/56-353 16 900000 M39029/58-364 900040 M39029/56-352 20 900001 M39029/58-363 900041 M39029/56-351 22D 900004 M39029/58-360 900044 M39029/56-348 23 900049 M39029/18-177 900048 M39029/17-172 * Use with piggy back grommets is mandatory ** For arrangement 21-48 only Contact size 8* 12 Coax Pin contacts Socket contacts Cable Type Proprietary No Military No Proprietary No Military No 900130 M39029/60-367 900140 M39029/59-366 900135 - 900145 - 900340 M39029/28-211 900350 M39029/75-416 900341 M39029/28-409 900351 M39029/75-417 M17/95-RG180 Raychem 9528 A1318 900384*** - 900394** - M17/113-RG316 900132 M39029/76-424 900142 M39029/77-428 900131 M39029/76-425 900141 M39029/77-429 M17/95-RG180 M17/94-RG179 M17/113-RG316 M17/119-RG174 M17/94-RG179 M17/113-RG316 M17/119-RG174 M17/94-RG179 M17/113-RG316 M17/119-RG174 KX22A M17/93-RG178 M17/169-00001 16 Twinax 8* 074834 M39029/90-529 072453 M39029/91-530 M17/176-00002 Twinax 8* 600611 - 600614 - M17/176-00002 Quadrax 100 8 900330 - 900338 - Tensolite NF24 Q100 Optical contact 16 - M29504/4-4040 - M29504/5-4046 50/125 & 62.5/125 fiber * Use with piggy back grommets is mandatory *** High performance size 12 coaxial contacts 50 ohms matched For other cable types, please consult us PIGGY BACK GROMMETS The piggy back grommets insure back contact sealing when using size 8 power, coax, twinax or quadrax contacts. Quadrax contact part numbers always include piggy back grommets. Type of contact Cable OD (mm) Proprietary No Size 8 power 4.4 to 5.2 900471 Size 8 twinax and coax 3 to 4.4 Size 8 twinax and coax 3 to 4.4 900472 900476 **** **** to use for arrangements 25-20, 19-17 52 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV ACCESSORIES OTHER ACCESSORIES SEALING PLUGS To be mounted behind the crimp contacts Contact size Proprietary No Military No 8 power 900024 - 12 900023 MS27488-12-2 16 900020 MS27488-16-2 20 900021 MS27488-20-2 22D 23 900022 900022 MS27488-22-2 MS27488-22-2 Dummy contact material Proprietary No 4 White plastic 900329 8 Green plastic 900488 8 Brass + gold finish 900183 8 White plastic (recommended) 900029 12 Brass + gold finish 900025 12 White plastic 900486 16 Brass + gold finish 900028 16 Blue plastic 900026 20 Brass + gold finish 900332 DUMMY CONTACTS To be mounted instead of the contacts Contact size Metal dummy contacts are recommended for applications requesting EMI protection. STANDARD PC TAIL CONTACTS Contact size Type 12 Proprietary No Tail dimension (mm) Proprietary No CI 5 900238 5 900403 CI 5 900240 5 900263 LI 8.5 900246 8.5 600526 CI 5 900241 5 900251 LI 8.5 900243 8.5 900252 CI 5 900245 5 900256 LI 8.5 922389 8.5 922390 CI 5 900458 5 900459 - consult us 900489 - - - consult us 900409 - - 16 - consult us 900184** consult us 900405 8 - consult us 072265 - - 20 22D 23 Coax Twinax Socket contacts Tail dimension (mm) 16 Signal Pin contacts 12 ** 900179 = 900184 + tin plating Other PC tail lengths are available, please consult us. Tri-StartTM TV-CTV 53 Amphenol Tri-StartTM TV-CTV ACCESSORIES OTHER ACCESSORIES REDUCING FERRULES Reducing ferrules allow using cables with smaller diameters than specified in the table part electrical characteristics Reducing ferrule No Contact size No reducing ferrule Wire Gauge 8 8 900154 10 Socket contacts 900197 / 900198 900217 900005 900045 900000 900040 900001 900041 90004 900044 12 14 16 16 18 20 20 22 24 16 18 20 22 24 26 28 20 22 24 26 28 34 30 22 24 26 28 No reducing ferrule 12 900092 Pin contacts 900093 No reducing ferrule 16 900091 No reducing ferrule 20 900090 900094 900099 22D No reducing ferrule The sealing of mated connectors is only guaranteed for the minimum wire outside diameter given in the table part electrical characteristics. 1500 CYCLES CRIMP CONTACTS (FOR CTV ONLY) Contact size Signal 54 Pin contacts Proprietary No Socket contacts Military No Proprietary No Military No 20 900318 M39029/107-621 900323 M39029/106-615 22D 900317 M39029/107-620 900322 M39029/106-614 16 900319 M39029/107-622 900324 M39029/106-616 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV ACCESSORIES APPLICATION TOOLS CRIMPING TOOLS Contact size Contact type Contact part number Proprietary No Crimping tool Military No 00 Proprietary No Positioner Military No Proprietary No Military No Refer to catalog contacts (DOC-000081-ANG) P S 4 P S P 900007 900047 Inner pin & socket Outer pin & socket 900 197 900 198 900 217 Inner pin & socket Outer pin & socket 900 005 M39029/58-365 900 045 M39029/56-353 Inner pin & socket Outer pin & socket 900 000 M39029/58-364 900 040 M39029/56-352 900 001 M39029/58-363 S 900 041 M39029/56-351 P S P S 900 004 900 044 900 049 900 048 M39029/58-360 M39029/56-348 M39029/18-177 M39029/17-172 8 Coax P P S 8 Power 12 Coax P S 12 16 Coax 16 20 22D 23 809947 809947 809 801 809 914 809 872 809 872 809 872 809 801 809 926 809 857 809 857 809 801 809 863 809 857 809 857 809 857 809 801 809 857 809 801 809 801 809 801 809801 809801 M22520/2-01 M22520/5-01 M22520/2-01 M22520/31-01 M22520/1-01 M22520/1-01 M22520/2-01 M22520/4-01 M22520/1-01 M22520/1-01 M22520/1-01 M22520/2-01 M22520/1-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 809948 809948 809 915 809 873 809 873 809 873 809 932 809 927 809 858 809 858 809 862 809 864 809 858 809 858 809 858 809 826 809 858 809 826 809 810 809 835 809 691 809 692 M22520/2-31 M22520/5-41 M22520/2-34 M22520/31-02 M22520/1-04 M22520/1-04 M22520/2-35 M22520/4-02 M22520/1-04 M22520/1-04 M22520/1-04 M22520/2-10 M22520/1-04 M22520/2-10 M22520/2-09 M22520/2-07 M22520/2-13 M22520/2-16 INSERTION AND REMOVAL TOOLS Plastic tools Insertion tool Contact size Removal tool Colour Proprietary No Military No Proprietary No Military No Insertion Extraction * 809 859 809 855 809 854 809 856 * M81969/14-04 M81969/14-03 M81969/14-10 M81969/14-01 809 859 809 855 809 854 809 856 M81969/14-12 M81969/14-04 M81969/14-03 M81969/14-10 M81969/14-01 yellow blue red green green white white orange white 8 Power/coax 12 16 20 22D * Manual insertion Metallic tools Straight type Contact size 4 8 Power/coax 12 16 20 22D 23 Angle type Insertion tools Insertion tools Proprietary No Removal tools Proprietary No Proprietary No * 809 816 809 817 809 819 810 010 809943 809961 809 846 809 847 809 849 810 010 Removal tools Military No Proprietary No Military No - - * 809 838 809 812 809 813 809 815 - * M81969/8-09 M81969/8-07 M81969/8-05 M81969/8-01 - 809 845 809 839 809 820 809 821 809 823 - M81969/8-14 M81969/8-10 M81969/8-08 M81969/8-06 M81969/8-02 - * Manual insertion Tri-StartTM TV-CTV 55 Amphenol Tri-StartTM TV-CTV HOW TO ORDER STANDARD VERSIONS AMPHENOL DESIGNATION Series TV: Metallic shell TV P00 R Q W 17-75 P A - - CTV: Composite shell Shell type P00: Square flange receptacle: 175C (O.D. cadmium, g.zinc cobalt, ni-PTFE, b.zinc nickel) PS00: Square flange receptacle: 200C *** (nickel, s.steel, bronze) 07: Jam nut receptacle: 175C (O.D. cadmium, g.zinc cobalt, ni-PTFE, b.zinc nickel) S07: Jam nut receptacle: 200C *** (nickel, s.steel, bronze) 06: Straight plug: 175C (O.D. cadmium, g.zinc cobalt, ni-PTFE, b.zinc nickel) S06: Straight plug: 200C *** (nickel, s.steel, bronze) 01: In line receptacle 175C (O.D. cadmium, g.zinc cobalt, ni-PTFE, b.zinc nickel) S01: In line receptacles 200C *** (nickel, s.steel, bronze) P02: P00 without rear thread (no poss. for backshell) 175C (O.D. cadmium, g.zinc cobalt, ni-PTFE, b.zinc nickel) PS02: PS00 without rear thread (no poss. for backshell) 200C *** (nickel, s.steel, bronze) Contact type R: Crimp contacts (or connector delivered without contact) Omit for PC tail contacts, Durmalon plating and black zinc nickel plating Ground Plane receptacle and Quadrax contact options G: conductive insert Q: insert compatible with quadrax or differential twinax contacts ** GQ: conductive insert compatible with quadrax or differential twinax contacts Omit for standard receptacle (without conductive insert) and insert without quadrax contact Class W: Olive Drab Cadmium plating (on aluminium or composite) F: Nickel Plating (on aluminium or composite) K: Passivated Stainless Steel S: Nickel plated Stainless Steel B: Marine Bronze (copper aluminium alloy) DT: Durmalon plating (Nickel - PTFE) Z: Green zinc Cobalt plated aluminium ZN: Black Zinc Nickel plated aluminium PC Tail Contacts Omit for crimp contacts CI: standard PCB contacts LI: long tail PCB contacts Shell size and Contact arrangement *** See section "Insert Arrangements" Contact type P: Pin (500 cycles) S: Socket (500 cycles) H: Pin (1500 cycles - CTV only) J: Socket (1500 cycles - CTV only) Polarization Blank for normal or A, B, C, D, E. See coding system, section "Insert Arrangements", sub-section "coding polarization" Contacts Omit for connectors delivered with contacts LC: Connector delivered without contacts Deviation F404 / F404LF / F404LFC: Tinned PCB contacts (lead tinned / silver tinned / silver-copper tinned) F485 (for TVS06 RB only): Coupling nut conforms to CECC75 - 201 - 002A (for arctic gloves) F459 / F459LF / F459LFC: stand-off receptacle (lead tinned / silver tinned / silver-copper tinned) F472 Integrated backshells For other deviations (FXXX), please consult us. ** For Quadrax or dif. Twinax compatible inserts, please omit the "S" corresponding to 200C compatibility when applicable, in the P/N. Ex: CTV07RGQF17 52PLC For other arrangements, shell, coding or deviation, please consult us. ***For high-density contact arrangement, please omit the S corresponding to 200C compatibility in the P/N. High-density inserts are +175C maxi compatible. Ex: TVP 00 RF 09 09 S : RoHS compliant 56 Tri-StartTM TV-CTV Amphenol HOW TO ORDER Tri-StartTM TV-CTV STANDARD VERSIONS MILITARY DESIGNATION (CRIMP CONTACTS ONLY) Series JD38999/ 20 F H 53 P A Shell type 20: Square flange receptacle 24: Jam nut receptacle 26: Straight plug Shell material and finish Composite J: Olive drab cadmium plated 175C M: Electroless nickel plated 200C Aluminium W: Olive drab cadmium plated 175C F: Electroless nickel plated 200C T: Nickel PTFE plated 175C Z: Black Zinc Nickel plated aluminium 175C Stainless steel K: Passivated 200C, firewall capability S: Nickel plated 200C, firewall capability Shell size A B C D E F G H J MIL 09 11 13 15 17 19 21 23 25 Amphenol Contact arrangement See section "Insert Arrangements" Contact and connector type A: Without pin contact B: Without socket contact P: With pin contacts S: With socket contacts H: With 1500 cycles pin contacts (only valid for composite) J: With 1500 cycles socket contacts (only valid for composite) Polarization N for normal or A, B, C, D, E. See coding system, section "Insert Arrangements" : RoHS compliant EN3645 (EUROPEAN NORM ORDERING INFORMATION, ASD-STAN) - (CRIMP CONTACTS ONLY) Standard number EN3645 F 0 G N 16 A N Class: W: Crimp version, Aluminum Olive drab cadmium plated, 175C F: Crimp version, Aluminum Nickel plated, 200C J: Crimp version, Composite material Olive Drab cadmium plated, 175C M: Crimp version, Composite material Nickel plated, 200C K: Crimp version, Passivated Stainless Steel, 200C Shell style: 0: Square flange receptacle 7: Jam Nut Receptacle 6: Plug Shell size code: A for 09, B for 11, C for 13, D for 15, E for 17, F for 19, G for 21, H for 23, J for 25 Insert type: N: Standard G: Grounded cavities Q: Quadrax insert, grounded L: Quadrax insert, non grounded R: Power insert Contact arrangement according to EN3645-002: See section "Insert Arrangements" Contact code: M: with Pin contacts F: with Socket contacts Coax, twinax, quadrax contacts are not supplied with the connector A: without Pin contacts B: without Socket contacts Polarization (Key Ways rotation): N, A, B, C, D, E. See coding system, section "Inser Arrangements" Tri-StartTM TV-CTV 57 Amphenol Tri-StartTM TV-CTV HERMETIC VERSIONS HOW TO ORDER AMPHENOL DESIGNATION Series TV SI YN 11 35 P - B 35 P N Shell type PS02: Square flange receptacle S07: Jam nut receptacle SI: Solder mounting receptacle Shell material and finish Y: Stainless steel passivated YN: Stainless steel nickel plated Shell size: 09/11/13/15/17/19/21/23/25 Contact arrangement See section "Insert Arrangements", marked with "Y" Contact type P: Pin Polarization Blank for normal or A, B, C, D, E. See coding system, section "Insert Arrangements" MILITARY DESIGNATION Connector type JD38999/ 25 N Shell type 21: Square flange receptacle 23: Jam nut receptacle 25: Solder mounting receptacle Shell material and finish Y: Stainless steel passivated N: Stainless steel nickel plated Shell size A B C D E F G H J MIL 09 11 13 15 17 19 21 23 25 Amphenol Contact arrangement See section "Insert Arrangements", marked with "Y" Contact type P: Pin Polarization N for normal or A, B, C, D, E. See coding system, section "Insert Arrangements" : RoHS compliant 58 Tri-StartTM TV-CTV Amphenol Tri-StartTM TV-CTV LANYARD RELEASE PLUGS - STANDARD VERSIONS HOW TO ORDER AMPHENOL DESIGNATION Shell finish 88: Olive-drab cadmium plated 91: Nickel plated 88 5565 20 K P Connector type Shell size and arrangement code See table I, section "Range Derivated", Sub-section "Lanyard Release Plugs" Others, please consult us Lanyard length A to Z code (see table III, section "Range Derivated", Sub-section "Lanyard Release Plugs" Contact type and polarization See chart below and coding, section "Insert Arrangement" MILITARY DESIGNATION Connector type JD38999/ 29 W D 35 E N Shell and contact type 29: Plug with pin contacts 30: Plug with socket contacts Shell finish W: Olive drab cadmium plated F: Nickel plated Shell size A* B C D E F G H J MIL 09* 11 13 15 17 19 21 23 25 Amphenol * Please consult us Contact arrangement See table I, section "Range Derivated", Sub-section "Lanyard Release Plugs" Lanyard length A to Z code (see table III, section "Range Derivated", Sub-section "Lanyard Release Plugs") Polarization N for normal or A, B, C, D, E. See coding, section "Insert arrangement" : RoHS compliant Tri-StartTM TV-CTV 59 Amphenol Tri-StartTM TV-CTV HOW TO ORDER LANYARD RELEASE PLUGS - COMPATIBLE WITH MIL-STD-1760 APPLICATIONS AMPHENOL DESIGNATION Series TV FB RW 25-11 P E FB: MIL-STD-1760 lanyard release plug RW: Olive drab cadmium plated Arrangement 25-11, 25-20: see section "Insert Arrangements" Contact type and polarization G: 25-11 arrangement, pin contacts only P: 25-20 arrangement, pin contacts only Lanyard length Other lengths are available upon request. See table A, section "Range Derivated", sub-section "Lanyard Release Plugs" MILITARY DESIGNATION Series JD38999/ 31 W E 11 N 1 Shell and contact type 31: Plug with pin contacts, per MIL-STD-1760 Shell finish W: Olive drab cadmium plated 175C Lanyard length. See table A, section "Range Derivated", sub-section "Lanyard Release Plugs" Contact arrangement 11: 25-11 arrangement 20: 25-20 arrangement Polarization N for 25-20 arrangement. See section "Insert Arrangement" A for 25-11 arrangement. Plug locking ring type 1: O 51mm (low profile) 2: O 68mm (please consult us) For MIL-STD-1760 Type II connectors, please consult us. 60 Tri-StartTM TV-CTV Amphenol NOTES Tri-StartTM TV-CTV Tri-StartTM TV-CTV 61 Amphenol Tri-StartTM TV-CTV HOW TO ORDER Shell material CROSS REFERENCES MIL-DTL-38999 Series III EN 3645 JD38999/20J X XX A EN3645 J0 X N XX A JD38999/20M X XX A EN3645 J0 X L XX A EN3645 J0 X Q XX A EN3645 M0 X N XX A JD38999/24J X XX A EN3645 M0 X L XX A EN3645 M0 X Q XX A EN3645 J7 X N XX A JD38999/24M X XX A EN3645 J7 X L XX A EN3645 J7 X Q XX A EN3645 M7 X N XX A Composite shell JD38999/26J X XX A JD38999/26M X XX A JD38999/20W X XX A JD38999/20Z X XX A EN3645 M7 X L XX A EN3645 M7 X Q XX A EN3645 J6 X N XX A EN3645 J6 X L XX A EN3645 M6 X N XX A EN3645 M6 X L XX A EN3645 W0 X N XX A EN3645 W0 X L XX A JD38999/20F X XX A EN3645 W0 X Q XX A EN3645 F0 X N XX A JD38999/24W X XX A EN3645 F0 X L XX A EN3645 F0 X Q XX A EN3645 W7 X N XX A Aluminium shell JD38999/24Z X XX A JD38999/24F X XX A JD38999/26W X XX A JD38999/26Z X XX A EN3645 W7 X L XX A EN3645 W7 X Q XX A EN3645 F7 X N XX A EN3645 F7 X L XX A EN3645 F7 X Q XX A EN3645 W6 X N XX A EN3645 W6 X L XX A JD38999/26F X XX A EN3645 F6 X N XX A EN3645 F6 X L XX A JD38999/20K X XX A EN3645 K0 X N XX A JD38999/20S X XX A Stainless Steel shell JD38999/24K X XX A EN3645 K7 X N XX A JD38999/24S X XX A JD38999/26K X XX A JD38999/26S X XX A Hermetic receptacle JD38999/21Y X XX P JD38999/21N X XX P JD38999/23Y X XX P JD38999/23N X XX P JD38999/25Y X XX P JD38999/25N X XX P Dust caps JD38999/32W X R JD38999/32W X N JD38999/33W X R JD38999/33W X N EN3645 K6 X N XX A AMPHENOL CTVP00RW CTVP00WCI CTVP00RQW CTVP00RGQW CTVPS00RF CTVPS00FCI CTVP00RQF CTVP00RGQF CTV07RW CTV07WCI CTV07RQW CTV07RGQW CTVS07RF CTVS07FCI CTV07RQF CTV07RGQF CTV06RW CTV06RQW CTVS06RF CTV06RQF ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC TVP00RW TVP00WCI TVP00RQW TVP00ZN TVP00ZNCI TVP00RQZN TVP00RGQZN TVP00RGQW TVPS00RF TVPS00FCI TVP00RQF TVP00RGQF TV07RW TV07WCI TV07RQW TV07RGQW TV07ZN TV07ZNCI TV07RQZN TV07RGQZN TVS07RF TVS07FCI TV07RQF TV07RGQF TV06RW TV06RQW TV06ZN TV06RQZN TVS06RF TV06RQF ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC TVPS00RK TVPS00KCI TVPS00RS TVPS00SCI TVS07RK TVS07KCI TVS07RS TVS07SCI TVS06RK TVS06RS ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ LC ## P ^ TVPS02Y TVPS02YN ## P ^ TVS07Y ## P ^ TVS07YN ## P ^ TVSIY ## P ^ TVSIYN ## P ^ BF R TV W BF RO TV W BEC R TV W BER R TV W Dummy receptacle SE00 TV W As example, male version without contact (except for bronze and hermetic male versions with contacts). Caption Shell size Insert arrangement Polarization, rotation of secondary keyways 62 MIL-DTL-38999 Series III P/N X XX EN3645 X XX AMPHENOL P/N ## ^ Tri-StartTM TV-CTV Amphenol NOTES Tri-StartTM TV-CTV Tri-StartTM TV-CTV 63 Amphenol in the world Amphenol in the world Amphenol Socapex 948, promenade de l'Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 00 contact@amphenol-socapex.fr www.amphenol-socapex.com www.twitter.com/AmphenolSocapex www.linkedin.com/company/amphenol-socapex Amphenol Sales contacts in Europe Amphenol Sales contacts in Asia Amphenol Air lb 2 rue Clement Ader, ZAC de WE 08110 Carignan - FRANCE Phone: +33 (0)3 24 22 78 49 Amphenol ioNix Greenfold Way -Leigh Lancashire, WN7 3XJ - UNITED KINGDOM Phone: +44 1942 685200 Amphenol PolAND Lwowska 8/16, 53-516 Wrocaw - POLAND Phone: +48 513017157 Amphenol DAEShiN 558 SongNae-Dong SoSa-Gu, Bucheon-city, Kyunggi-Do Korea 420-130 Phone: +81-32 610 3800 Amphenol SEFEE Z.I. des Cazes - BP 243 12402 Saint-Affrique Cedex - France Phone: +33 5 65 98 11 00 Amphenol mArtEC limitED St Augustines Business Park, Swalecliffe, Whitstable Kent, CT5 2QJ - UNITED KINGDOM Phone: +44 (0) 1227 793733 Amphenol SwitzErlAND Phone: +43 699 10396071 Amphenol EASt ASiA ltD. 159 Kampong Ampat, #04-01/04 KA Place Singapore 368328 Phone: +656549-6537/ +656294-2128 Amphenol limitED Thanet Way, Whitstable Kent, CT53JF - UNITED KINGDOM Phone: +44 (0) 1227 773200 Amphenol iNVotEC Invotec Circuits Tamworth Limited Hedging Lane, Dosthill, Tamworth, B77 5HH - UNITED KINGDOM Phone: +44 (0) 1827 263250 Amphenol itAlY Via Barbaiana n.5 20020 Lainate - Milano - ITALY Phone: +39 293 254 214 Amphenol Sales contacts in North America Amphenol PCD 72 Cherry Hill Drive - Beverly, MA. 01915 - USA Phone: +1 978-624-3400 Amphenol FibEr SYStEmS iNt. 1300 Central Expwy N, Suite 100 Allen, TX 75013 - USA Phone: +1 214-547-2400 Amphenol AEroSPACE oPErAtioNS 40-60 Delaware street - Sidney, NY 13838-1395 - USA Phone: +1 800-678-0141 Amphenol PriNtED CirCuit boArD tEChNologY 91 Northeastern Boulevard Nashua, New Hampshire 03062 - USA Phone: +1 603-324-4500 SV miCrowAVE 2400 Centrepark West Dr. West Palm Beach, FL 33409 - USA Phone: +1 561-840-1800 Amphenol ADVANCED SENSorS 967 Windfall Road St. Mary's, PA 15857-3333 - USA Phone: +1 814-834-9140 Amphenol PCD Co. ltD Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street Bao An District, Shenzhen 518108 - China Phone: +86 755 8173 8000/8286 Amphenol JAPAN 471-1, Deba, Ritto-City, Shiga 520 3041 - Japan Phone: +81 77 553 8501 Amphenol Sales contacts in other Areas timES miCrowAVE SYStEmS 358 Hall Avenue Wallingford, CT 06492 - USA Phone: +1 800-867-2629 Amphenol ArgENtiNA Av. Callao 930 2do piso Oficina B "Plaza" C1023 - AAP Buenos Aires - ARGENTINA Phone: +54 11 4815-6886 Amphenol mExiCo Prolongacion Reforma 61-6 B2 Col Paseo de las Lomas - C.P. 013130 - MEXICO Phone: +52 55 5258-9984 Amphenol griFFith ENtErPriSES 6000 E Coury Drive Cottonwood, AZ 86326-9202 - USA Phone: +1 928-634-3685 Amphenol AuStrAliA PtY limitED 2 Fiveways Blvd., Keysborough - Melbourne Victoria 3173- AUSTRALIA Phone: +61 3 8796-8888 Amphenol AFriCA 30 Impala Rd, Sandton 2146 - SOUTH AFRICA Phone: +27 82 410 5179 Amphenol NExuS tEChNologiES, iNC 50 Sunnyside Ave., Stamford, CT 06902 - USA Phone: +1 203-327-7300 Amphenol Do brAzil Rua Diogo Moreira, 132, 20 andar, rooms 2001-2-3 CEP: 05423-010 Sao Paulo SP - BRAZIL Phone: +55 11 3815-1003 Amphenol turKEY Sun Plaza 15 Kat: 15 Maslak Hah. Bilim Sok. No.5 Sisli/Istanbul, 34398 - TURKEY Phone: +90 212 367 9220 Amphenol boriSCh tEChNologiES 4511 East Paris Grand Rapids, MI 49512 - USA Phone: +1 616 554 9820 bar-tec ltd., iSrAEl 3 Hagavish Street, K fir-Barkan Bldg. East Industrial Zone - Kfar-Sava, 44102 - ISRAEL Phone: +972 9 764 4100 Amphenol CANADA CorPorAtioN 605 Milner avenue - M1B 5X6 - Toronto, Ontario CANADA Phone: +1 416 291 4401 Amphenol For Technical Support, please contact us: +33 (0)4 50 89 28 49 www.amphenol-socapex.com/technical_support www.amphenol-socapex.com The information given in this document are as a guideline only. We thegiven right to document modify our products Thereserve information in this is a guideline only. in any way we deem necessary. We reserve the right is to prohibited, modify our products in any way we deem Any duplication unless approved in necessary. writing. Any catalog duplication is prohibited, unless approved in writing.PEFC & FSC labels, and is printed by a printer certified "Imprim'Vert(R)". This uses paper from managed forests, Designed by Amphenol Socapex 64 Amphenol iNtErCoNNECt iNDiA PriVAtE limitED 105 Bhosari Industrial Area - Pune 411 026 - India Phone: +91 20 3068 8304 Amphenol NorDiC Phone: +46 70 2129200 (Mil/Aero) +46 76 7909560 (Industrial) Amphenol ibEriCA Edificio Burgosol, Oficina nr 55 - Comunidad de Amphenol bENElux Madrid, 35-bis Las Rozas SPAIN Zadkinestraat 26 Phone: +34 629 054629 Almere, 1328 NN - THE NETHERLANDS Phone: +31 651 296835 Amphenol AuStriA & CEE Wiener Gasse 68 Amphenol SCANDiNAViA Ab 2380 Perchtoldsdorf - AUSTRIA Angsullsvagen 7-S Phone: +43 699 10396071 187 51 Taby - SWEDEN Phone: +46 70 21 29200 January 2019 Gestion & Edition by AMPHENOL SOCAPEX E113H / DOC-000035-ANG Amphenol Air lb gmbh Am Kleinbahnhof 4 66740 Saarlouis - GERMANY Phone: +49 6831 981 00 Amphenol South CENtEr Slovenia, Serbia, Montenegro, Yugoslavia, Greece, Bulgaria Phone: +39 02 93254208 Phone: +39 02 93254210 Your local Contact: Your local Contact: For more information, please visit our website: www.amphenol-socapex.com