MAL229956222E3 - VISHAY - Product.Network

299 PHL-4TSI

www.vishay.com Vishay BCcomponents

Revision: 27-Sep-2019 1Document Number: 28432

For technical questions, contact: aluminumcaps2@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Electrolytic Capacitors

Power High Ripple Current Long Life 4-Terminal Snap-In

ADDITIONAL RESOURCES

Fig. 1

FEATURES

• Polarized aluminum electrolytic capacitors,

non-solid electrolyte

• Large types, minimized dimensions, cylindrical

aluminum case, insulated with a blue sleeve

• Pressure relief on the side of the aluminum case

• Very long useful life: 5000 h at 105 °C

• Temperature range up to 105 °C

• Stable mounting and keyed polarity

• High ripple current capability

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Switched mode power supplies

• Renewable energy power converters

• Energy storage in pulse systems

MARKING

The capacitors are marked (where possible) with the

following information:

• Rated capacitance (in μF)

• Tolerance code on rated capacitance, code letter in

accordance with IEC 60062 (M for ± 20 %)

• Rated voltage (in V)

• Date code

• Name of manufacturer

• Code for factory of origin

• “-” sign to identify the negative terminal, visible from the

top and side of the capacitor

• (Partial) ordering code

• Climatic category in accordance with IEC 60068

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case size (D x L in mm) 35 x 50 to 45 x 100

Rated capacitance range CR470 μF to 2200 μF

Tolerance on CR ± 20 %

Rated voltage range, UR400 V to 450 V

Category temperature range -40 °C to +105 °C

Endurance test at 105 °C 2000 h

Useful life at 105 °C 5000 h

Shelf life at 0 V, 105 °C 1000 h

Based on sectional specification IEC 60384-4 / EN 130300

Climatic category IEC 60068 40 / 105 / 56

3D Models

299

PHL-4TSI

105 °C

096

PLL-4TSI

SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)

(μF)

UR (V)

400 450

470 - 35 x 50

40 x 40

560 35 x 50 35 x 60

40 x 50

680 40 x 40 35 x 70

820 35 x 60 35 x 80

40 x 50 40 x 60

1000 35 x 70

35 x 100

40 x 80

45 x 60

1200

35 x 80

45 x 7040 x 70

45 x 60

1500 35 x 100 40 x 100

45 x 70 45 x 80

1800 40 x 100 45 x 100

45 x 80

2200 45 x 100 -

299 PHL-4TSI

www.vishay.com Vishay BCcomponents

Revision: 27-Sep-2019 2Document Number: 28432

For technical questions, contact: aluminumcaps2@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters AND AVAILABLE FORMS

4-TERMINAL SNAP-IN

Fig. 2 - 4-Terminal snap-in Fig. 3 - Mounting hole diagram

Dummy terminals (A and C) must be free from the electrical circuit.

Table 1

Note

• Unless otherwise specified, all electrical values in Table 2 apply

at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %

ORDERING EXAMPLE

Electrolytic capacitor 299 series

2200 μF / 400 V

4-terminal snap-in:

Ordering code: MAL2 299 56222 E3 

Former 12NC: 2222 299 56222

22.5

Ø D

Bottom view

Lmax. 6.3 ± 1

60° 60°

dummy dummy

2 ± 0.1

(4 x)

22.5 ± 0.1

60°

DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES

NOMINAL

CASE SIZE

Ø D x L

Ø DMAX. Lmax. MASS

(g)

PACKAGING QUANTITIES

(units per box)

CARDBOARD BOX

DIMENSIONS

L x W x H

35 x 50 36 52 72 50 390 x 198 x 60

35 x 60 36 62 91 50 390 x 198 x 70

35 x 70 36 72 103 50 377 x 375 x 97

35 x 80 36 82 115 50 377 x 375 x 107

35 x 100 36 102 151 50 377 x 375 x 127

40 x 40 41 42 70 50 440 x 223 x 60

40 x 50 41 52 94 50 440 x 223 x 70

40 x 60 41 62 118 25 230 x 230 x 80

40 x 70 41 72 134 25 230 x 230 x 90

40 x 80 41 82 150 25 230 x 230 x 100

40 x 100 41 102 176 25 230 x 230 x 120

45 x 60 46 62 150 36 377 x 375 x 87

45 x 70 46 72 170 36 377 x 375 x 97

45 x 80 46 82 190 36 377 x 375 x 107

45 x 100 46 102 250 36 377 x 375 x 127

ELECTRICAL DATA

SYMBOL DESCRIPTION

CRRated capacitance at 100 Hz

IRRated RMS ripple current at 100 Hz and 105 °C

IL5 Max. leakage current after 5 min at UR

ESR Max. equivalent series resistance at 100 Hz

Z Max. impedance at 10 kHz

299 PHL-4TSI

www.vishay.com Vishay BCcomponents

Revision: 27-Sep-2019 3Document Number: 28432

For technical questions, contact: aluminumcaps2@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 2

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

(μF)

NOMINAL

CASE SIZE

Ø D x L

(mm)

100 Hz

105 °C

(A)

IL5

5 min

(mA)

TYP. ESR

100 Hz

(m)

MAX. ESR

100 Hz

(m)

TYP. Z

10 kHz

(m)

MAX. Z

10 kHz

(m)

CATALOG

NUMBER

MAL2299.......

400

560 35 x 50 2.70 0.452 170 220 130 160 56561E3

680 40 x 40 2.79 0.548 150 190 110 140 56681E3

820 35 x 60 3.44 0.660 120 150 90 110 56821E3

820 40 x 50 3.51 0.660 120 160 90 110 66821E3

1000 35 x 70 3.88 0.804 100 130 70 90 56102E3

1200 35 x 80 4.34 0.964 90 110 60 80 56122E3

1200 40 x 70 4.50 0.964 90 110 60 80 66122E3

1200 45 x 60 4.61 0.964 90 110 60 80 76122E3

1500 35 x 100 5.54 1.204 70 90 50 60 56152E3

1500 45 x 70 5.20 1.204 70 90 60 70 66152E3

1800 40 x 100 6.02 1.444 50 70 40 50 56182E3

1800 45 x 80 5.74 1.444 60 80 50 60 66182E3

2200 45 x 100 6.77 1.764 50 60 40 50 56222E3

450

470 35 x 50 2.54 0.427 190 240 130 160 57471E3

470 40 x 40 2.45 0.427 190 240 140 170 67471E3

560 35 x 60 2.96 0.508 160 200 100 130 57561E3

560 40 x 50 3.05 0.508 160 200 110 140 67561E3

680 35 x 70 3.34 0.616 120 160 90 110 57681E3

820 35 x 80 3.76 0.742 110 140 70 90 57821E3

820 40 x 60 3.73 0.742 110 140 80 100 67821E3

1000 35 x 100 4.74 0.904 90 110 60 80 57102E3

1000 40 x 80 4.41 0.904 90 110 60 80 67102E3

1000 45 x 60 4.34 0.904 90 120 60 80 77102E3

1200 45 x 70 4.84 1.084 80 100 60 70 57122E3

1500 40 x 100 5.67 1.354 60 80 40 50 57152E3

1500 45 x 80 5.39 1.354 60 80 50 60 67152E3

1800 45 x 100 6.36 1.624 50 70 40 50 57182E3

ADDITIONAL ELECTRICAL DATA

PARAMETER CONDITIONS VALUE

Voltage

Surge voltage  400 V versions Us = 1.1 x UR

Reverse voltage Urev  1 V

Current

Leakage current After 1 min at URIL1  0.006 CR x UR + 4 μA

After 5 min at URIL5  0.002 CR x UR + 4 μA

Inductance

Equivalent series inductance (ESL) All case sizes Ca. 20 nH

299 PHL-4TSI

www.vishay.com Vishay BCcomponents

Revision: 27-Sep-2019 4Document Number: 28432

For technical questions, contact: aluminumcaps2@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RIPPLE CURRENT AND USEFUL LIFE

Table 3

Note

• Multiplier of useful life code: CCC206-5

Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load

Table 4

ENDURANCE TEST DURATION AND USEFUL LIFE

ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h)

2000 5000

MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY

FREQUENCY (Hz)

50 100 200 400 1000 10 000

IR MULTIPLIER

0.9 1.0 1.2 1.3 1.4 1.5

IA = Actual ripple current at 100 Hz

IR = Actual ripple current at 100 Hz and 105 °C

(1) Useful life at 105 °C and IR applied: 5000 h

Lifetime multiplier

0.0

0.5

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

2.8

3.0

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

CCC206-5

200

100

6.0

4.0

3.0

2.0

1.5

1.0

60 70 80 90 100 110

(1)

Tamb (°C)

299 PHL-4TSI

www.vishay.com Vishay BCcomponents

Revision: 27-Sep-2019 5Document Number: 28432

For technical questions, contact: aluminumcaps2@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 5



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

TEST PROCEDURES AND REQUIREMENTS

TEST PROCEDURE

(quick reference) REQUIREMENTS

NAME OF TEST REFERENCE

Endurance

IEC 60384-4 /

EN130300

subclause 4.13

Tamb = 105 °C; UR applied

2000 h

C/C: ± 10 %

ESR  1.3 x spec. limit

Z  2 x spec. limit

IL5  spec. limit

Useful life CECC 30301

subclause 4.13

Tamb = 105 °C; UR and IR applied; 

5000 h

C/C: ± 30 %

ESR  3 x spec. limit

Z  3 x spec. limit

IL5  spec. limit

no short or open circuit,

no visible damage

total failure percentage:  3 %

Shelf life

IEC 60384-4 /

EN130300

subclause 4.17

Tamb = 105 °C; no voltage applied;

1000 h



After test: UR to be applied for 30 min

24 h to 48 h before measurement

C/C: ± 10 %

ESR  1.2 x spec. limit

IL5  2 x spec. limit

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.