34
001 = Receptacle
Without 002 = Plug, parallel board mounting
Keying 005 = Plug, perpendicular board mounting
Code Contact Type “X”
No. Dim.
722 Wire hole tail .187
721 P. C. solder tail .250
736 P. C. solder tail .281
737 P. C. solder tail .562
753 P. C. solder tail .125
771 P. C. solder tail .484
Varicon®
Series 8219 – 0.050" Staggered Dual Row
FEATURES
•For p.c. card-to-card applications
•High contact density
•Low withdrawal force contacts
•Rugged, color coded end guides
•Parallel or perpendicular p.c. board mounting
•Mates with Series 8218
TECHNICAL SPECIFICATIONS
ORDERING CODE
00 8219 042
Number of Contacts
018, 030, 036, 042, 054, 072
722
Contact Code
(see below)
001
Variation Code
Current Rating:
5 amperes, maximum
Contact Resistance:
6 milliohms, maximum
Contact Material and Plating:
Phosphor Bronze
Gold, 10 microinches minimum,
over nickel, 50 to 100 microinches
Insulator Material:
Diallyl phthalate, glass-filled, flame resist-
ant per MIL-M-14F, Type SDGF.
Guidance Hardware:
Left hand guides: Metal, gold color
Right hand guides: Metal, silver color
Insulation Resistance:
5,000 megohms, minimum
Dielectric Withstanding Voltage:
Sea Level: 1000 Volts rms
3.4" Hg: 500 Volts rms
Insertion/Withdrawal Force:
2 to 8 ounces per contact
For Variation = 001
Code Contact Type
No.
000 P. C. solder tails formed
722 Wire hole tail unformed
For Variation = 002
Code Contact Type “Y”
No. Dim.
722 Wire hole tail .157
721 P. C. solder tail .219
736 P. C. solder tail .250
737 P. C. solder tail .531
753 P. C. solder tail .093
771 P. C. solder tail .453
For Variation = 005
NOTE: Connector is supplied with
mounting screws or eyelets, as applicable
(see drawings).
Contact Factory for Special Variations.
When Keying is ordered with part number, the Key is installed at the factory.
POLARIZING SYSTEM
1
3
5
7
9
11
13
15
17
2
4
6
8
10
12
14
16
18
35
Varicon®
Series 8219 – 0.050" Staggered Dual Row
Number Ref. Ref.
of A B C DEFG
K
Contacts
18 17 .850 (0.033) 1.150 (0.045) 1.290 (0.051) 1.400 (0.055) 1.540 (0.061) .964 (0.038) 1.300 (0.051)
30 29 1.450 (0.057) 1.750 (0.069) 1.890 (0.075) 2.000 (0.079) 2.140 (0.084) 1.564 (0.061) 1.900 (0.075)
36 35 1.750 (0.069) 2.050 (0.080) 2.190 (0.086) 2.300 (0.091) 2.440 (0.096) 1.864 (0.073) 2.220 (0.087)
42 41 2.050 (0.080) 2.350 (0.093) 2.490 (0.098) 2.600 (0.102) 2.740 (0.108) 2.164 (0.085) 2.500 (0.098)
54 53 2.650 (0.104) 2.950 (0.116) 3.090 (0.122) 3.200 (0.126) 3.340 (0.131) 2.764 (0.109) 3.100 (0.122)
72 71 3.550 (0.140) 3.850 (0.152) 3.990 (0.157) 4.100 (0.161) 4.240 (0.167) 3.664 (0.144) 4.000 (0.157)
DIMENSIONS: millimeters (inches)
RECEPTACLE 001 MATES WITH PLUGS 002 AND 005
MOUNTING LAYOUTS
*When used in metal panel with Code Contact 722 cut out diam. Is .210".
