PGFI Series 15 Amp Plug Series GFCI / ELCI INTRODUCTION The LineGardTM 15 Amp Plug Series is a ground fault circuit interrupter designed and manufactured by North Shore Safety, Ltd., a leader in innovated safety products. The PGFP product is rated for 15 amps at 120 VAC and available in either manual (safe start) or automatic reset configuration. Standard offerings include products geared for maintenance repair organizations (MRO), original equipment manufacturers (OEM) or general portable power applications. MRO products are supplied with heavy-duty 12/3 conductor high flex (indoor/outdoor) safety yellow cable (SJTW type) capable of withstanding heavy trade or industrial use. OEM products are configured with robust 14/3 conductor (indoor/outdoor) black cable (SJTW type) for integration into trade related equipment. All products are industrial/trade grade tough and are backed by a 2 year manufacturer's warranty. Note that any cord or equipment updated with this device becomes OSHA compliant for power usage in a confined space and NEC compliant to NEC 590.6 (a) and (b). FEATURES * Bright LED power indicator * Recessed interface buttons reduce damage and nuisance tripping from rough service * High strength polycarbonate housing * Class A cULus 943 listed with load side connector assemblies * Assemblies without load side connectors are UL recognized for use under UL 943 * NEMA 3R rated (indoor / outdoor use) * Assembly is rated for 15 amps / 120 VAC * Available in automatic or manual reset configurations* * Available with single or tri-tap plug assembly Specifications Listing Type Rated Supply Voltage Rated Current Trip Level, Class A Operating Frequency 1 Reset Type Ground Trip Current Overload Current Insulation Voltage Endurance Operations cULus Listed Class A UL 943 120VAC Up to 15 Amps or rating of wiring device and/or cable 5mA +/- 1mA (UL 943) 60 Hz Automatic or Manual 4 mA to 6 mA 90 Amps @ 125VAC 1,500 VRMS for 1 minute 3000 operations 1. Manual configuration should be specified if automatic start-up after power restoration of circuit power creates an unsafe condition. 2. Integrated or replacement cable must be indoor/outdoor 3-conductor cable of type ST, SJT, SE, SJE, SO or SJO 268 PGFI Series - 15 Amp Plug Series http://airpax.sensata.com/ Confined Space Construction Sites Application Opportunities: Electrical wet locations Power generators Agricultural equipment Outdoor electrical equipment Cement cutting equipment Portable electric heaters Submersible pumps Pipeline heaters Automotive garages Industrial part washers Outdoor signage Vending equipment OSHA 29 CFR 1926.404 (b)(1)(ii), OSHA 29 CFR 1926.405 (a)(2)(ii)(G) (NEC 590.6) Commercial Garages (NEC 511.12) Outdoor Signs (NEC 600.10) Fountains & Water Displays (NEC 680.58) Spa & Hot Tubs (NEC 680.40) Marinas & Boat Yards Ground Fault / Equipment Leakage RELATED CODES (NEC 555.3) DECISION TABLES PGFP - M11 0 K Y - ST2 1 Product Type 6 Cable Configuration No designation No cable required (field wireable) 2 Reset Type (1) M11 Manual A11 Automatic Note: 3 Cable Gauge 4 Cable Type No designation No cable required (field wireable) 5 Connector No designation No cable required (field wireable) No designation No cable required (field wireable) 0 12 gauge, 3 conductor K SJTW (yellow) Y cULus 943 Listed 1 14 gauge (15 amp) J SJ00W (black) N No connector 2 16 gauge (13 amp) 3 18 gauge (10A) ST2 Single-tap, 2' yellow cable TT2 Tri-tap, 2' yellow cable ST25 Single-tap, 25' yellow cable TT25 Tri-tap, 25` yellow cable ST50 Single tap, 50' yellow cable FL __ Flying leads, specify cable length in feet 1. Manual configuration should be specified if automatic power-up, after power restoration of circuit power, could create an unsafe condition. 2. Integrated or replacement cable must be indoor/outdoor 3-conductor cable of type ST, SJT, SE, SJE, SO or SJO 3. Custom cord sets are available. Please consult Airpax for other options Tri-tap http://airpax.sensata.com/ OEM Cordset (SJOOW) Field wireable PGFI Series - 15 Amp Plug Series 269