PRODUCT DATASHEET DCP42 160W Single Continuous Switching Power Supply with USB Continuous switching Power Supply offers high efficiency electrical power conversion for greater energy conservation and lighter weight. Applications: - Laboratory use - Bench Testing, Service, and Repair - Research and Development facilities - Educational and Institutional Training Features * Constantly calculates and adjusts the Voltage * Three on-board user-defined Voltage/Current presets and Current limit points according to available * Store 20 presets with up to 999 cycles each on a PC via USB and supplied Software maximum power (160W) * At maximum current (10A), voltage is limited to 16V; * Waveform Generator at maximum voltage (42V), current is limited to 3.8A * Dual action rotary encoder control with push Software also includes DC Ramp and * Complete with power cord, software, and USB cable knob for fine and coarse tuning * Remote control for Programming, Output Voltage/ Current, and ON/OFF using supplied software, driver, and USB Specifications Output Voltage 0 to 42V Output Current 0 to 10A Basic Accuracy (0.2%+5 counts) Load Voltage Regulation 0.15% (10-100% rated current) Line Voltage Regulation 0.02% (90-264V AC) Load Current Regulation 0.5% (10-90% rated voltage) Line Current regulation 0.1% (90-264V AC) Ripple and Noise 5m Vrms, 50m Vp-p Dimensions/ Weight 7.9 x 3.7 x 9.5" (200 x 95 x 245mm)/ 5lbs (2.3kg) Ordering DCP42............... 160W Single Continuous Switching Power Supply with USB (100-240V) Specifications subject to change without notice. Copyright (c) 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 4/18/13 www.extech.com