EPP-200-48 - MEAN WELL ENTERPRISES

200W Single Output with PFC Function EPP-200 series

EPP - 200

■Model Encoding

■Description

EPP-200 is a 200W highly reliable green PCB type power supply with a high power density (21.9W/in) on

the 4 by 2 footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 48V.

The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W.

EPP-200 is able to be used for both Class (with FG) and Class (no FG) system design. EPP-200 is ⅠⅡ

equipped with complete protection functions; it is complied with the international safety regulations such as

TUV EN62368-1, UL62368-1 and IEC62368-1. EPP-200 series serves as a high price-to-performance power

supply solution for various industrial applications.

4" 2" miniature size×

Universal AC input / Full range

Built-in active PFC function

EMI Conduction for Class B Radiation for Class B with

FG(Class ) and Class A without FG(Class )ⅠⅡ

No load power consumption<0.5W

High efficiency up to 94%

Protections: Short circuit / Overload / Over voltage /

Over temperature

Cooling by free air convection for 140W and 200W with

10CFM forced air

Built-in 12V/0.5A FAN supply

LED indicator for power on

Operating altitude up to 5000 meters

3 years warranty

Industrial automation machinery

Industrial control system

Mechanical and electrical equipment

Electronic instruments, equipments or

apparatus

■Features ■Applications

Output voltage

Output wattage

Series name

-12

Bauar

Sicherheit

egel gema

t gepruf t

www.

ID 2000000000

tuv.com

wac g

File Name:EPP-200-SPEC 2019-07-03

EN62368-1

UL62368 1-

IEC62368-1

TPTC004

200W Single Output with PFC Function EPP-200 series

SPECIFICATION

MODEL

DC VOLTAGE

CURRENT 10CFM

10CFM

Convection

RATED

POWER

OUTPUT

LINE REGULATION

VOLTAGE ADJ. RANGE

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.4

FREQUENCY RANGE

POWER FACTOR

EFFICIENCY (Typ.)

INPUT

FUNCTION

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

WORKING HUMIDITY

WORKING TEMP.

FAN SUPPLY

OVER TEMPERATURE

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

AC CURRENT (Typ.)

500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load

12ms/230VAC 12ms/115VAC at full load

80 ~ 264VAC 113 ~ 370VDC

47 ~ 63Hz

PF>0.94/230VAC PF>0.98/115VAC at full load

93%93% 94%

16.5 ~ 19.5V

94%

26.4 ~ 31.2V

94%

29.7 ~ 35V 52.8 ~ 62.4V

1.8A/115VAC 1A/230VAC

COLD START 30A/115VAC 60A/230VAC

110 ~ 140% rated output power

13.2 ~ 15.6V

Protection type : Hiccup mode, recovers automatically after fault condition is removed

20 ~ 90% RH non-condensing

-30 ~ +70 (Refer to "Derating Curve")℃

12V@0.5A for driving a fan ; tolerance +15% ~ -15%

Protection type : Shut down o/p voltage, re-power on to recover

-40 ~ +85 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

500.2Khrs min. MIL-HDBK-217F (25 )℃

101.6*50.8*29mm (L*W*H)

0.19Kg; 72pcs/14.7Kg/0.82CUFT

±1.0%

±0.5%

±1.0%

±0.5%

±1.0%

±0.5% ±0.5%

±1.0% ±1.0%

±0.5%

±2.0% ±2.5% ±1.0% ±1.0% ±1.0%

100mVp-p

11.4~12.6V 14.3~15.8V 22.8~25.2V 25.6 ~ 28.4V 45.6 ~50.4V

100mVp-p 150mVp-p 150mVp-p 200mVp-p

15V 24V 27V 48V

16.7A

11.7A

13.4A

9.4A

8.4A

5.9A

7.5A

5.3A

4.2A

200.4W

140.4W 141W

201W

141.6W

201.6W

143.1W

202.5W

144W

201.6W

EPP-200-12 EPP-200-15 EPP-200-24 EPP-200-27 EPP-200-48

SAFETY STANDARDS

RIPPLE & NOISE (max.)

Note.2

VOLTAGE TOLERANCE

Note.3

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltages. Please check the derating curve for more details.

5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by

mounting the unit on a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets 360 360

EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.

(as available on http://www.meanwell.com)

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher ℃℃

than 2000m(6500ft).

ENVIRONMENT

SAFETY &

EMC

(Note 5)

PROTECTION

Protection type : Shut down o/p voltage, re-power on to recover

Compliance to EN55032 (CISPR32) Conduction for Class B Radiation for Class B with FG(Class ) andⅠ

Class A without FG(Class ), EN61000-3-2,-3,ⅡEAC TP TC 020

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A, EAC TP TC 020

UL62368-1, TUV EN62368-1, IEC62368-1, approvedEAC TP TC 004

12V

EMC IMMUNITY

EMC EMISSION

<0.75mA / 240VAC

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

OPERATING ALTITUDE Note.6

5000 meters

File Name:EPP-200-SPEC 2019-07-03

Block Diagram

Output Derating VS Input VoltageDerating Curve

fosc : 65KHz

CIRCUIT

DETECTION

O.L.P.O.T.P.

EMI

FILTER

POWER

SWITCHING FILTER

FILTER

RECTIFIERS

-V

+12V FAN

supply

I/P

CONTROL

O.V.P.

EMI FILTER

RECTIFIER

INPUT VOLTAGE (VAC) 60Hz

80 11590 130120 160140 200180 240220 264

LOAD (%)

100

AMBIENT TEMPERATURE ( )℃

LOAD (%)

-30 0 2010 30 40 45

100

6050 70 (HORIZONTAL)

With 10CFM Fan With 10CFM Fan

Convection

for 24~48V

Convection

V~ Vfor 12 15

200W Single Output with PFC Function EPP-200 series

File Name:EPP-200-SPEC 2019-07-03

Mechanical Specification Unit:mm

AC Input Connector (CN1) : JST B3P-VH or equivalent

Pin No.

Assignment

AC/L

No Pin

AC/N

Mating Housing

JST VHR JST SVH-21T-P1.1

or equivalent or equivalent

Terminal

DC Output Connector (CN2) : JST B6P-VH or equivalent

Pin No.

1,2,3

4,5,6

Assignment

-V

Mating Housing

JST VHR

or equivalent

Terminal

JST SVH-21T-P1.1

or equivalent

Mating Housing

JST PHR-2

or equivalent

Terminal

JST SPH-002T-P0.5S

or equivalent

FAN Connector(CN101) : or equivalentJST B2B-PH-K-S

Pin No.

Assignment

+12V

DC COM

: Grounding required

※Note FAN 10CFM

direction

Air flow

50mm

※Note : 1. The FAN supply is designed to serve as the source of the additive external fan for the cooling of the power supply, enabling the full load delivery and assuring the best

2.EMI Conduction for Class B Radiation for Class B with FG(Class ) and Class A without FG(Class ).

ⅠⅡ

life span of the product. Please do not use this FAN supply to drive other devices.

200W Single Output with PFC Function EPP-200 series

4- 3.3ψ

CN101

LED SVR1

95.25

101.6

CN2

50.8

44.45 3.175

3.175

3 max.

FS1

CN1

T4A/250V

FS2

F4A/250V

Installation Manual

Please refer to : http://www.meanwell.com/manual.html

File Name:EPP-200-SPEC 2019-07-03