AMPLA7050S MOLDED INDUCTOR
• Shielded construction
• Soft saturation
• High current density
• Designed for switching frequencies between
100KHz-2MHz
• Automotive option available upon request
ELECTRICAL SPECIFICATIONS @ 25°C
PART NUMBER* INDUCTANCE
(uH)
TOLERANCE
(%)
IRMS
(A)
ISAT
(A)
DC RESISTANCE
(mΩ) TYPE
TYP MAX
AMPLA7050S-R40MT 0.40 20 23 31 3.1 3.7 Lead Frame
AMPLA7050S-R47MT 0.47 20 22 30 3.5 3.9 Lead Frame
AMPLA7050S-R56MT 0.56 20 20 27 3.6 4.2 Lead Frame
AMPLA7050S-R60MT 0.60 20 19 25 3.8 4.3 Lead Frame
AMPLA7050S-R68MT 0.68 20 18 24 4.0 4.5 Lead Frame
AMPLA7050S-R82MT 0.82 20 16.5 22 4.6 4.9 Lead Frame
AMPLA7050S-1R0MT 1.0 20 15 20 6.1 6.5 Lead Frame
AMPLA7050S-1R2MT 1.2 20 14 18 6.7 7.5 Lead Frame
AMPLA7050S-1R5MT 1.5 20 12 16.5 8.6 9.0 Lead Frame
AMPLA7050S-2R2MT 2.2 20 10 14 11.2 12.0 Lead Frame
AMPLA7050S-3R3MT 3.3 20 8 12 19.0 20.9 Lead Frame
AMPLA7050S-4R7MT 4.7 20 6.5 10 28.0 30.8 Lead Frame
AMPLA7050S-5R6MT 5.6 20 6 9.0 43.5 49.0 Lead Frame
AMPLA7050S-6R8MT 6.8 20 5.5 8.5 46.0 51.5 Lead Frame
AMPLA7050S-8R2MT 8.2 20 5 8.5 56.0 63.0 Lead Frame
AMPLA7050S-100MT 10.0 20 4 7.5 60.0 69.0 Lead Frame
AMPLA7050S-220MT 22.0 20 2.5 5.5 140 170.0 Lead Frame
Test Conditions
Inductance: 100 kHz, 1 V, 0 Adc
Humidity Range: 85 ± 2% RH
Temperature Rise Current: Current measured at ∆ T of 40°C
Saturation Current: Current measured at ∆ L of 30%
AMPLA7050S 1R0 M T
Series Inductance* Tol. 1Packaging 2
1. Tolerance: M = 20% 2. Packaging: B = Bulk
T = Tape and Reel (800pcs/reel)
*Refer to Electrical Specification table
PART BUILDER
LLC
FEATURES
Operating Temperature:
-55°C to +125°C with (40°C rise) Irms
current.
Maximum Part Temperature: +125°C
Components Storage Temperature:
-55°C to +125°C
Tape and Reel Packaging
Temperature: -55°C to +80°C
MSL: Level 1
GENERAL
SPECIFICATIONS
PRODUCT DIMENSIONS
MATERIALS
Core: Carbonyl Powder
Wire: Copper
Terminal: Tin Plating
Ink: Black
Paint: Gray
Revised 09/23/19
LLC
4.8 ± 0.2
8.4
3.5
2.5
1.8 ± 0.3
3.0 ± 0.3
ROHS
COMPLIANT
ISO
9001:2015
CERTIFIED
Top View Bottom View
Front View Side View
RECOMMENDED LANDING PATTERN
Dimensions: mm
* Please refer to Part Identification section
Pb
7.3 ± 0.3
6.6 ± 0.3
Check Inventory
Request Samples
Tp
TL
TL
Tp
TSMIN
TSMAX
Ramp Up
Ramp Down
Critical Zone
TL to Tp
2
3
1
Time
t 25˚C to Peak
25
Preheat
Temperature
AMPLA7050S MOLDED INDUCTOR
LLC
RECOMMENDED REFLOW PROFILE
ZONE DESCRIPTION TEMPERATURE TIMES
1Preheat Tsmin ~ Tsmax
150°C ~ 200°C 60 ~ 180 sec.
2Reflow TL
217°C 60 ~ 150 sec.
3Peak Heat TP
260°C 10 sec. MAX
Revised 09/23/19
LLC
AMPLA7050S MOLDED INDUCTOR
LLC
PACKAGING
TYPE A B C D
13” x 16 mm 16.4 +2/-0 100.0 ± 2.0 13.0 +0.5/-0.2 330.0
B0A0K0P W F T D
7.7 ± 0.1 7.0 ± 0.1 5.3 ± 0.1 12.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1
Tape and Reel: 800
Units per Carton: 6,400
T&R per Carton: 8
Weight per Carton: 13.0 kg
Weight per Unit: 1.25 g
Carton Dimensions: 410 x 325 x 415 mm
This product is commercial o-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent
medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result
in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for
more information.
Revised 09/23/19
Headquarters:
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
LL
C
Dimensions: mm
