PM4H-F
Features
1. Switch operation times between three types of time ranges of 1 s to 10 s and 1
min to 10 min.
2. Instantaneous reset available.
3. The shorter body makes it easier to use.
4. Compliant with UL, CSA, CE and LLOYD.
48
1.890
48
1.890
62.5
2.461
mm inch
Specifications
PM4H-F8
Type
Item PM4H-F8R
100 to 120V AC, 200 to 240V AC, 24V AC, 12V DC, 24V DCRated operating voltage
50/60Hz common (AC operating type)
3A 250V AC (resistive load)
Power OFF-delay Power OFF-delay (with reset)
Rated frequency
Rated control capacity
1s to 10s: 3 range switchable 1 min to 10 min: 3 range selectable
±0.3%
±5% (Full-scale value)
±0.5% (at the operating voltage changes between 85 to 110%)
Max. 100mΩ (at 1A 6V DC)
±2% (at 20°C ambient temp. at the range of –10 to +50°C +14 to +122°F)
Time range
Operation time fluctuation
107
105 (at rated control capacity)
Mechanical (contact)
Electrical (contact)
85 to 110% of rated operating voltage (at 20°C coil temp.), 90 to 110% (DC Type)Allowable operating voltage range
–10 to +50°C +14 to +122°FAmbient temperature
30 to 85%RH (non-condensing)Ambient humidity
860 to 1,060hPaAtmospheric pressure
20%Ripple factor (DC type)
IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>Protective construction
100g 3.527 oz (Pin type), 110g 3.880 oz (Screw terminal type)Weight
Min. 98m/s2 (4 times on 3 axes)
Shock resistance Min. 980m/s2 (5 times on 3 axes)
Functional
Destructive
10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes)
Vibration resistance 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1hr on 3 axes)
Functional
Destructive
Between live and dead metal parts
Between input and output
Between contacts of different poles (*3)
Between contacts of same pole
Insulation resistance (Initial value)
1,500Vrms for 1 min Between live and dead metal parts
1,500Vrms for 1 min Between input and output
1,000Vrms for 1 min Between contacts of different poles (*3)
750Vrms for 1 min Between contacts of same pole
Breakdown voltage (Initial value)
Setting error
Voltage error
Contact resistance (Initial value)
50msMin. reset time
s range type: 100ms
min range type: 2s
Min. power supply width
55°C 131°FMax. temperature rise
Au flash on Silver alloyContact material
Temperature error
Timed-out 1 Form CTimed-out 2 Form C Timed-out 2 Form CContact arrangement
Operation mode
Approx. 1.6VA (100 to 120V AC, 200 to 240V AC), Approx. 2.3VA (24V AC)
Approx. 1.1W (12V DC, 24V DC)
Rated power consumption
Rating
Time
accuracy *1
Contact
Life
Electrical
function
Mechanical
function
Operating
condition
Others
PM4H-F11R
Min. 100MΩ(At 500V DC)
*Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple
factor for DC), 20°C 68°F ambient temperature.
2) For the 1s range, the tolerance for each specification becomes ±10ms. When the power goes on, in rush current (0.3A) flows. Cautions should be taken. The
minimum power supplying time after forced reset input is 2s or more.
3) Between contacts of different pools for PM4H-F8, PM4H-F11R types only.
UL File No.: E122222
CSA File No.: LR39291
DIN48 SIZE ANALOG
MULTIRANGE POWER
OFF-DELAY TIMERS PM4H-F
RoHS Directive compatibility information
http://www.nais-e.com/
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
PM4H-F
Product types
PM4H-F8
Type Contact arrangement Time range Part number
Rated operating
voltage
Protective
construction
Terminal
type
Operation
mode
PM4HF8-S-AC120VW
PM4HF8-S-AC240VW
PM4HF8-S-AC24VW
PM4HF8-S-DC12VW
PM4HF8-S-DC24VW
PM4HF8-M-AC120VW
PM4HF8-M-AC240VW
PM4HF8-M-AC24VW
PM4HF8-M-DC12VW
PM4HF8-M-DC24VW
PM4HF8-S-AC120V
PM4HF8-S-AC240V
PM4HF8-S-AC24V
PM4HF8-S-DC12V
PM4HF8-S-DC24V
PM4HF8-M-AC120V
PM4HF8-M-AC240V
PM4HF8-M-AC24V
PM4HF8-M-DC12V
PM4HF8-M-DC24V
PM4HF8R-S-AC120VW
PM4HF8R-S-AC240VW
PM4HF8R-S-AC24VW
PM4HF8R-S-DC12VW
PM4HF8R-S-DC24VW
PM4HF8R-M-AC120VW
PM4HF8R-M-AC240VW
PM4HF8R-M-AC24VW
PM4HF8R-M-DC12VW
PM4HF8R-M-DC24VW
PM4HF8R-S-AC120V
PM4HF8R-S-AC240V
PM4HF8R-S-AC24V
PM4HF8R-S-DC12V
PM4HF8R-S-DC24V
PM4HF8R-M-AC120V
PM4HF8R-M-AC240V
PM4HF8R-M-AC24V
PM4HF8R-M-DC12V
PM4HF8R-M-DC24V
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
8 pins
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
3 selectable time ranges
over 1s to 10s
Relay Timed-out
2 Form C
Power
OFF-delay
(without reset)
PM4H-F8R Relay Timed-out
1 Form C
Power
OFF-delay
(with
instantaneous
reset)
3 selectable time ranges
over 1 min to 10 min
3 selectable time ranges
over 1s to 10s
3 selectable time ranges
over 1 min to 10 min
3 selectable time ranges
over 1s to 10s
3 selectable time ranges
over 1 min to 10 min
3 selectable time ranges
over 1s to 10s
3 selectable time ranges
over 1 min to 10 min
IP65
IP50
IP65
IP50
Time range
Time range
Time range
unit
1
5
10
0.04s to 1s
0.2s to 5s
0.4s to 10s
0.04 min to 1 min
0.2 min to 5 min
0.4 min to 10 min
s range type min range type
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
PM4H-F
PM4H-F11R
Type Contact arrangement Time range Part number
Rated operating
voltage
Protective
construction
Terminal
type
Operation
mode
PM4HF11R-S-AC120VW
PM4HF11R-S-AC120VSW
PM4HF11R-S-AC240VW
PM4HF11R-S-AC240VSW
PM4HF11R-S-AC24VW
PM4HF11R-S-AC24VSW
PM4HF11R-S-DC12VW
PM4HF11R-S-DC12VSW
PM4HF11R-S-DC24VW
PM4HF11R-S-DC24VSW
PM4HF11R-S-AC120V
PM4HF11R-S-AC120VS
PM4HF11R-S-AC240V
PM4HF11R-S-AC240VS
PM4HF11R-S-AC24V
PM4HF11R-S-AC24VS
PM4HF11R-S-DC12V
PM4HF11R-S-DC12VS
PM4HF11R-S-DC24V
PM4HF11R-S-DC24VS
PM4HF11R-M-AC120VW
PM4HF11R-M-AC120VSW
PM4HF11R-M-AC240VW
PM4HF11R-M-AC240VSW
PM4HF11R-M-AC24VW
PM4HF11R-M-AC24VSW
PM4HF11R-M-DC12VW
PM4HF11R-M-DC12VSW
PM4HF11R-M-DC24VW
PM4HF11R-M-DC24VSW
PM4HF11R-M-AC120V
PM4HF11R-M-AC120VS
PM4HF11R-M-AC240V
PM4HF11R-M-AC240VS
PM4HF11R-M-AC24V
PM4HF11R-M-AC24VS
PM4HF11R-M-DC12V
PM4HF11R-M-DC12VS
PM4HF11R-M-DC24V
PM4HF11R-M-DC24VS
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
11 pins
Screw terminal
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
100 to 120V AC
200 to 240V AC
24V AC
12V DC
24V DC
3 selectable time ranges
over 1s to 10s
Relay Timed-out
2 Form C
Power
OFF-delay
(with
instantaneous
reset)
3 selectable time ranges
over 1 min to 10 min
IP65
IP50
IP65
IP50
Dimensions
•Screw terminal type (Flush mount) •Pin type (Flush mount/surface mount)
.236
6.0
48
1.890 62.5
2.461
12.0
.472
41 dia.
1.614 dia.
48
1.890 44.5
1.752
.236
6.0 66.5
2.618
12.0
.472
48
1.890
41 dia.
1.614 dia.
44.5
1.752
48
1.890
14.5
.571
mm inch
Toletance: ±0.5 ±.020
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
PM4H-F
Terminal layouts and Wiring diagrams
•PM4H-F8 (without reset input)
Pin type
Time-out 2 Form C
Screw-tightening pin type
The PM4H-F11R should be used for the time-
limit 2C.
Screw-tightening pin type
The PM4H-F11R should be used for the time-
limit 1C and to connect reset input.
PM4H-F (with reset) input conditions
1. Contact input (pin type example) 2. Non-contact input (pin type example)
•PM4H-F8R (with reset input)
Pin type
Time-out 1 Form C, with reset input
•PM4H-F11R (with reset input)
Pin type
Time-out 2 Form C, with reset input
Screw terminal type
Time-out 2 Form C, with reset input
(–) (+)
N.O.
N.O.
N.C.
N.C.
8
5
17
6
2
34
Operating voltage
N.O.
N.C.
8
5
17
6
2
34
Reset
input
(–) (+)
Operating voltage
N.O.
N.C.
N.C.
3
5
4
211110
9
8
7
6
N.O.
Reset input
(–) (+)
Operating voltage
N.C.
N.O.
N.C. N.O.
54321
109876
11
(–)
(+)
Operating
voltage
Reset input
Reset input
Reset input
Reset input
Reset input
Photo-coupler
Photo-coupler
PM4H-F8R PM4H-F11R PM4H-F8R PM4H-F11R
Use a contact with good contact relia-
bility for the input. Contact bounce can
lead to erroneous operation of the
timer, so use a contact with short
bounce time. Make the resistance
between terminals for a short circuit
less than 1k-ohms. Make the resis-
tance between terminals for an open
circuit greater than 100k-ohms.
Be sure to use a photo-
coupler for non-contact
input.
Check that Vce = 0.6V
Max. when ON.
•PM4H-F8 (without reset input) •PM4H-F8R/F11R (with reset input)
Operation
Power
supply
Time-delay
contact N.O.
Time-delay
contact N.C.
Tr
T
Power
supply
Reset
input
Time-delay
contact N.O.
Time-delay
contact N.C.
Tr TrTs Ts
tT
Note: Note:
t<T: Time setting
Tr: Minimum power supply application time
Note: Ts: Min. 2s (Time to restart operation after reset input is set
to OFF: both second type and minute type)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1. Operation method
1) Operation mode setting
[PM4H-A type]
8 operation modes are selectable with
operation mode selector.
Turn the operation mode selector with
screw driver.
Operation mode is shown up through the
window above the mode selector. The
marks are , , , , , , , .
Turn the mode selector to the mark until
you can check by clicking sound.
Confirm the mode selector position if it is
correct.
If the position is not stable, the timer
might mis-operate.
2) Time range setting
[PM4H series common]
16 time ranges are selectable between
1s to 500h.
Turn the time range selector with the
screw driver.
Clockwise turning increases the time
range, and Counter-clockwise turning
decrease the time range.
Confirm the range selector position if it is
correct.
If the position is not stable, the timer
might mis-operate.
3) Time setting [common]
To set the time, turn the set dial to a
desired time within the range.
Instantaneous output will be on when the
dial is set to “0”.
When the instantaneous output is used,
the dial should be set under “0” range.
(Instantaneous output area)
When power supply is on, the time
range, setting time and operation mode
cannot be changed.
Turn off the power supply or a reset sig-
nal is applied to set the new operation
mode.
If the position is not stable, the timer
might mis-operate.
ON FL FO
OF1
SF OS
OF2
OC
2. How to use “Set ring” [PM4H series common]
1) Fixed time setting
Set the desired time and put 2 set rings
together.
Insert the rings into stopper to fix the
time.
2) Time range setting
Example: Time range 20s to 30s.
Shorter time value setting
Set the dial to 20s.
Place the stop ring at the right side of
stopper.
Longer time value setting
Set the dial to 30s.
Place the stop ring at the left side of
stopper.
Set range
Applicable standard (PM4H series common)
Set dial
Set ring (2 pcs)
ATC18001 (sold separately)
Stopper boss
Stopper
Stop ring
Stopper boss
00
30
Longer time value
SEC
20
Shorter time value
SEC
PM4H SERIES MODES AND TIME SETTING
Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions.
Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III
EMC
(EMI)EN61000-6-4
Radiation interference electric field strength
Noise terminal voltage
(EMS)EN61000-6-2
Static discharge immunity
RF electromagnetic field immunity
EFT/B immunity
Surge immunity
Conductivity noise immunity
Power frequency magnetic field immunity
Voltage dip/Instantaneous stop/Voltage fluctuation immunity
EN55011 Group1 ClassA
EN55011 Group1 ClassA
EN61000-4-2 4 kV contact
8 kV air
EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz)
10 V/m pulse modulation (895 MHz to 905 MHz)
EN61000-4-4 2 kV (power supply line)
1 kV (signal line)
EN61000-4-5 1 kV (power line)
EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz)
EN61000-4-8 30 A/m (50 Hz)
EN61000-4-11 10 ms, 30% (rated voltage)
100 ms, 60% (rated voltage)
1,000 ms, 60% (rated voltage)
5,000 ms, 95% (rated voltage)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
