PM4H-F DIN48 SIZE ANALOG MULTIRANGE POWER OFF-DELAY TIMERS PM4H-F UL File No.: E122222 CSA File No.: LR39291 Features 1. Switch operation times between three types of time ranges of 1 s to 10 s and 1 min to 10 min. 2. Instantaneous reset available. 3. The shorter body makes it easier to use. 4. Compliant with UL, CSA, CE and LLOYD. 48 1.890 48 1.890 62.5 2.461 mm inch RoHS Directive compatibility information http://www.nais-e.com/ Specifications Type Item Rated operating voltage Rated frequency Rating Time accuracy *1 Contact Life Rated power consumption Rated control capacity Operation mode Time range Operation time fluctuation Setting error Voltage error Temperature error Contact arrangement Contact resistance (Initial value) Contact material Mechanical (contact) Electrical (contact) Allowable operating voltage range Insulation resistance (Initial value) Electrical function Breakdown voltage (Initial value) Min. power supply width Min. reset time Max. temperature rise Vibration resistance Mechanical function Operating condition Others Shock resistance Functional Destructive Functional Destructive Ambient temperature Ambient humidity Atmospheric pressure Ripple factor (DC type) Protective construction Weight PM4H-F8R PM4H-F11R 100 to 120V AC, 200 to 240V AC, 24V AC, 12V DC, 24V DC 50/60Hz common (AC operating type) Approx. 1.6VA (100 to 120V AC, 200 to 240V AC), Approx. 2.3VA (24V AC) Approx. 1.1W (12V DC, 24V DC) 3A 250V AC (resistive load) Power OFF-delay Power OFF-delay (with reset) 1s to 10s: 3 range switchable 1 min to 10 min: 3 range selectable 0.3% 5% (Full-scale value) 0.5% (at the operating voltage changes between 85 to 110%) 2% (at 20C ambient temp. at the range of -10 to +50C +14 to +122F) Timed-out 2 Form C Timed-out 1 Form C Timed-out 2 Form C Max. 100m (at 1A 6V DC) Au flash on Silver alloy 107 5 10 (at rated control capacity) 85 to 110% of rated operating voltage (at 20C coil temp.), 90 to 110% (DC Type) Between live and dead metal parts Between input and output Min. 100M (At 500V DC) Between contacts of different poles (*3) Between contacts of same pole 1,500Vrms for 1 min Between live and dead metal parts 1,500Vrms for 1 min Between input and output 1,000Vrms for 1 min Between contacts of different poles (*3) 750Vrms for 1 min Between contacts of same pole s range type: 100ms min range type: 2s 50ms 55C 131F 10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes) 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1hr on 3 axes) Min. 98m/s2 (4 times on 3 axes) Min. 980m/s2 (5 times on 3 axes) -10 to +50C +14 to +122F 30 to 85%RH (non-condensing) 860 to 1,060hPa 20% IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type> 100g 3.527 oz (Pin type), 110g 3.880 oz (Screw terminal type) PM4H-F8 *Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple factor for DC), 20C 68F ambient temperature. 2) For the 1s range, the tolerance for each specification becomes 10ms. When the power goes on, in rush current (0.3A) flows. Cautions should be taken. The minimum power supplying time after forced reset input is 2s or more. 3) Between contacts of different pools for PM4H-F8, PM4H-F11R types only. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. PM4H-F Time range Time range unit Time range 1 5 10 s range type min range type 0.04s to 1s 0.2s to 5s 0.4s to 10s 0.04 min to 1 min 0.2 min to 5 min 0.4 min to 10 min Product types Type Operation mode Contact arrangement Time range 3 selectable time ranges over 1s to 10s 3 selectable time ranges over 1 min to 10 min PM4H-F8 Power OFF-delay (without reset) Relay Timed-out 2 Form C 3 selectable time ranges over 1s to 10s 3 selectable time ranges over 1 min to 10 min 3 selectable time ranges over 1s to 10s PM4H-F8R Power OFF-delay (with instantaneous reset) 3 selectable time ranges over 1 min to 10 min Relay Timed-out 1 Form C 3 selectable time ranges over 1s to 10s 3 selectable time ranges over 1 min to 10 min Protective Rated operating construction voltage 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC IP65 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC IP50 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC IP65 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC IP50 100 to 120V AC 200 to 240V AC 24V AC 12V DC 24V DC Terminal type 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Part number PM4HF8-S-AC120VW PM4HF8-S-AC240VW PM4HF8-S-AC24VW PM4HF8-S-DC12VW PM4HF8-S-DC24VW PM4HF8-M-AC120VW PM4HF8-M-AC240VW PM4HF8-M-AC24VW PM4HF8-M-DC12VW PM4HF8-M-DC24VW PM4HF8-S-AC120V PM4HF8-S-AC240V PM4HF8-S-AC24V PM4HF8-S-DC12V PM4HF8-S-DC24V PM4HF8-M-AC120V PM4HF8-M-AC240V PM4HF8-M-AC24V PM4HF8-M-DC12V PM4HF8-M-DC24V PM4HF8R-S-AC120VW PM4HF8R-S-AC240VW PM4HF8R-S-AC24VW PM4HF8R-S-DC12VW PM4HF8R-S-DC24VW PM4HF8R-M-AC120VW PM4HF8R-M-AC240VW PM4HF8R-M-AC24VW PM4HF8R-M-DC12VW PM4HF8R-M-DC24VW PM4HF8R-S-AC120V PM4HF8R-S-AC240V PM4HF8R-S-AC24V PM4HF8R-S-DC12V PM4HF8R-S-DC24V PM4HF8R-M-AC120V PM4HF8R-M-AC240V PM4HF8R-M-AC24V PM4HF8R-M-DC12V PM4HF8R-M-DC24V PM4H-F Type Operation mode Contact arrangement Protective Rated operating construction voltage Time range 100 to 120V AC 200 to 240V AC 24V AC IP65 12V DC 24V DC 3 selectable time ranges over 1s to 10s 100 to 120V AC 200 to 240V AC 24V AC IP50 12V DC PM4H-F11R Power OFF-delay (with instantaneous reset) 24V DC Relay Timed-out 2 Form C 100 to 120V AC 200 to 240V AC 24V AC IP65 12V DC 24V DC 3 selectable time ranges over 1 min to 10 min 100 to 120V AC 200 to 240V AC 24V AC IP50 12V DC 24V DC Terminal type 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 11 pins Screw terminal 6.0 .236 * Pin type (Flush mount/surface mount) 62.5 2.461 48 1.890 44.5 1.752 48 1.890 12.0 .472 6.0 .236 66.5 2.618 41 dia. 1.614 dia. 48 1.890 12.0 .472 41 dia. 1.614 dia. 48 1.890 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. PM4HF11R-S-AC120VW PM4HF11R-S-AC120VSW PM4HF11R-S-AC240VW PM4HF11R-S-AC240VSW PM4HF11R-S-AC24VW PM4HF11R-S-AC24VSW PM4HF11R-S-DC12VW PM4HF11R-S-DC12VSW PM4HF11R-S-DC24VW PM4HF11R-S-DC24VSW PM4HF11R-S-AC120V PM4HF11R-S-AC120VS PM4HF11R-S-AC240V PM4HF11R-S-AC240VS PM4HF11R-S-AC24V PM4HF11R-S-AC24VS PM4HF11R-S-DC12V PM4HF11R-S-DC12VS PM4HF11R-S-DC24V PM4HF11R-S-DC24VS PM4HF11R-M-AC120VW PM4HF11R-M-AC120VSW PM4HF11R-M-AC240VW PM4HF11R-M-AC240VSW PM4HF11R-M-AC24VW PM4HF11R-M-AC24VSW PM4HF11R-M-DC12VW PM4HF11R-M-DC12VSW PM4HF11R-M-DC24VW PM4HF11R-M-DC24VSW PM4HF11R-M-AC120V PM4HF11R-M-AC120VS PM4HF11R-M-AC240V PM4HF11R-M-AC240VS PM4HF11R-M-AC24V PM4HF11R-M-AC24VS PM4HF11R-M-DC12V PM4HF11R-M-DC12VS PM4HF11R-M-DC24V PM4HF11R-M-DC24VS mm inch Toletance: 0.5 .020 Dimensions * Screw terminal type (Flush mount) Part number 14.5 .571 44.5 1.752 PM4H-F Terminal layouts and Wiring diagrams * PM4H-F8 (without reset input) Pin type Time-out 2 Form C N.C. N.C. N.O. 4 5 3 2 (-) * PM4H-F8R (with reset input) Pin type Time-out 1 Form C, with reset input N.C. N.O. 4 5 6 7 3 2 Reset input 1 8 Operating voltage * PM4H-F11R (with reset input) Pin type Time-out 2 Form C, with reset input (+) (-) Screw-tightening pin type The PM4H-F11R should be used for the timelimit 2C. Reset input N.O. N.C. N.C. 6 7 5 6 7 N.O. 4 3 2 1 8 Operating voltage 1 11 N.O. 8 9 10 Operating voltage (+) (-) Screw-tightening pin type The PM4H-F11R should be used for the timelimit 1C and to connect reset input. (+) Screw terminal type Time-out 2 Form C, with reset input N.C. N.O. 6 7 8 9 10 N.C. N.O. 11 1 (+) 2 3 Operating voltage 4 5 Reset input (-) PM4H-F (with reset) input conditions 1. Contact input (pin type example) PM4H-F8R 2. Non-contact input (pin type example) PM4H-F11R PM4H-F11R Reset input Reset input PM4H-F8R Use a contact with good contact reliability for the input. Contact bounce can lead to erroneous operation of the timer, so use a contact with short bounce time. Make the resistance between terminals for a short circuit less than 1k-ohms. Make the resistance between terminals for an open circuit greater than 100k-ohms. Photo-coupler Reset input Reset input Check that Vce = 0.6V Max. when ON. Photo-coupler Operation * PM4H-F8 (without reset input) * PM4H-F8R/F11R (with reset input) Note: Tr Tr Note: Ts Tr Ts Power supply Power supply T Time-delay contact N.O. Reset input Time-delay contact N.C. Time-delay contact N.O. T Be sure to use a photocoupler for non-contact input. t Time-delay contact N.C. t<T: Time setting Tr: Minimum power supply application time Note: Ts: Min. 2s (Time to restart operation after reset input is set to OFF: both second type and minute type) All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. PM4H SERIES MODES AND TIME SETTING 1. Operation method 1) Operation mode setting [PM4H-A type] 8 operation modes are selectable with operation mode selector. Turn the operation mode selector with screw driver. Operation mode is shown up through the window above the mode selector. The marks are ON , FL , FO , OF1 , SF , OS , OF2 , OC . Turn the mode selector to the mark until you can check by clicking sound. Confirm the mode selector position if it is correct. If the position is not stable, the timer might mis-operate. 2) Time range setting [PM4H series common] 16 time ranges are selectable between 1s to 500h. Turn the time range selector with the screw driver. Clockwise turning increases the time range, and Counter-clockwise turning decrease the time range. Confirm the range selector position if it is correct. If the position is not stable, the timer might mis-operate. 2. How to use "Set ring" [PM4H series common] 2) Time range setting 1) Fixed time setting Example: Time range 20s to 30s. Set the desired time and put 2 set rings together. Shorter time value setting Insert the rings into stopper to fix the Set the dial to 20s. time. Place the stop ring at the right side of stopper. Stopper boss Stopper 3) Time setting [common] To set the time, turn the set dial to a desired time within the range. Instantaneous output will be on when the dial is set to "0". When the instantaneous output is used, the dial should be set under "0" range. (Instantaneous output area) When power supply is on, the time range, setting time and operation mode cannot be changed. Turn off the power supply or a reset signal is applied to set the new operation mode. If the position is not stable, the timer might mis-operate. Longer time value setting Set the dial to 30s. Place the stop ring at the left side of stopper. Set range Shorter time value Longer time value Stopper boss Set ring (2 pcs) ATC18001 (sold separately) Stop ring 20 Set dial 0 30 0 SEC SEC Note) The stoppers for the lower limit setting set ring and the upper limit setting set ring face the opposite directions. Applicable standard (PM4H series common) Safety standard EN61812-1 (EMI)EN61000-6-4 Radiation interference electric field strength Noise terminal voltage (EMS)EN61000-6-2 Static discharge immunity RF electromagnetic field immunity EMC EFT/B immunity Surge immunity Conductivity noise immunity Power frequency magnetic field immunity Voltage dip/Instantaneous stop/Voltage fluctuation immunity Pollution Degree 2/Overvoltage Category III EN55011 Group1 ClassA EN55011 Group1 ClassA EN61000-4-2 4 kV contact 8 kV air EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz) 10 V/m pulse modulation (895 MHz to 905 MHz) EN61000-4-4 2 kV (power supply line) 1 kV (signal line) EN61000-4-5 1 kV (power line) EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz) EN61000-4-8 30 A/m (50 Hz) EN61000-4-11 10 ms, 30% (rated voltage) 100 ms, 60% (rated voltage) 1,000 ms, 60% (rated voltage) 5,000 ms, 95% (rated voltage) All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.