A2
2.54mm Pitch Card Edge Connector
CR22 Series
■Product Standards
Rating Current rating: 3A
Voltage rating: 300VAC
Operating Temperature Range: -30 to +85ç (Note 1)
Operating Humidity Range: 40 to 80%
Storage Temperature Range: -10 to +60ç (Note 2)
Storage Humidity Range: 40 to 70%
(Note 2)
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
500V DC
1000V AC/1 minute.
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Manual soldering: 350ç for 3 seconds
1000M ohms min.
No flashover or insulation breakdown.
20m ohms max.
No electrical discontinuity of 10μs or more
Insulation resistance : 1000M ohms min.
Contact resistance : 20m ohms max.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
(-65ç: 30 minutes→15 to 35ç: 5 minutes max.→
125ç: 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.
Vibration
5.
Humidity(Steady state)
6.Temperature Cycle
7.
Durability (Mating/un-mating)
8.
Resistance to Soldering heat
Item Specification Condition
Selective gold plated
Tin plated
■Material
Parts Material Finish Remarks
Insulator
Contact
PBT
Copper alloy
Black
Contact area
Lead area
UL94V-0
---------------
---------------
■Features
1. 2.54mm pitch Contact
2. Variation in number
of contacts
20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80,100, and
120 contacts are available.
3. Board Mount Type
Straight dip and right angle through hole types are
available.
4. To prevent mis-insertion in the board
Using the polarizing key prevents mis-insertion in
the printed board.
■Ordering Information
CR22 A - 50 D - 2.54 DS
1 3 52 4 6
Series Name : CR22
Blank : With Mounting hole
A : Without mounting hole
B :
Card Edge 7.62mm type with mounting hole
C :
Card Edge 7.62mm type without mounting hole
D : VERSA bus type with mounting hole
E : VERSA bus type without mounting hole
Contact alignment : D : Double side
Contact pitch : 2.54mm
Contact type
DS : Straight type
DSA : Right angle type
Number of contacts : 20, 30, 34, 36, 44, 50, 60, 62,
68, 72, 80, 100, 120
1
23
4
5
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A3
CR22 Series●2.54mm Pitch Card Edge Connector
■Straight Through hole Type
Unit: mm
Note : The 120 contacts type differs in configuration.
C
Part Number CL No. B D EA
Number of Contacts
20
30
34
44
50
68
72
80
100
120
49.04
61.74
66.82
79.52
87.14
84.71
110.00
115.08
125.24
150.64
176.04
41.44
54.14
59.22
71.92
79.54
78.11
102.40
107.48
117.64
143.04
168.44
34.04
46.74
51.82
64.52
72.14
70.10
95.00
100.08
110.24
135.64
161.04
27.94
40.64
45.72
58.42
66.04
66.04
88.90
93.98
104.14
129.54
154.75
22.86
35.56
40.64
53.34
60.96
60.96
83.82
88.90
99.06
124.46
149.86
F
34.04
46.74
51.82
64.52
72.14
70.10
95.00
100.08
110.24
135.64
161.04
GRoHS
9.5
9.5
9.5
9.5
9.5
9.4
9.5
9.5
9.5
9.5
10
YES
CR22 - 20D-2.54DS(70)
CR22 - 30D-2.54DS(70)
CR22 - 34D-2.54DS(70)
CR22 - 44D-2.54DS(70)
CR22 - 50D-2.54DS(70)
CR22B- 50D-2.54DS(70)
CR22 - 68D-2.54DS(70)
CR22 - 72D-2.54DS(70)
CR22 - 80D-2.54DS(70)
CR22 -100D-2.54DS(70)
CR22D-120D-2.54DS(70)
CL522-0063-9-70
CL522-0009-3-70
CL522-0011-5-70
CL522-0001-1-70
CL522-0003-7-70
CL522-0047-2-70
CL522-0017-1-70
CL522-0019-7-70
CL522-0049-8-70
CL522-0005-2-70
CL522-0053-5-70
Note
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A4
CR22 Series●2.54mm Pitch Card Edge Connector
■Straight Through hole Type
Unit: mm
Note : The 120 contacts type differs in configuration.
C
Part Number CL No. B D RoHSA
Number of Contacts
20
30
34
36
44
50
60
62
68
72
80
100
120
34.04
46.74
51.82
54.36
52.32
64.52
72.14
70.10
84.84
87.38
85.34
95.00
100.08
110.24
135.64
161.04
27.94
40.64
45.72
48.26
48.26
58.42
66.04
66.04
78.74
81.28
81.28
88.90
93.98
104.14
129.54
154.75
22.86
35.56
40.64
43.18
43.18
53.34
60.96
60.96
73.66
76.20
76.20
83.82
88.90
99.06
124.46
149.86
9.5
9.5
9.5
9.5
9.4
9.5
9.5
9.4
9.5
9.5
9.4
9.5
9.5
9.5
9.5
10
YES
CR22A- 20D-2.54DS(70)
CR22A- 30D-2.54DS(70)
CR22A- 34D-2.54DS(70)
CR22A- 36D-2.54DS(70)
CR22C- 36D-2.54DS(70)
CR22A- 44D-2.54DS(70)
CR22A- 50D-2.54DS(70)
CR22C- 50D-2.54DS(70)
CR22A- 60D-2.54DS(70)
CR22A- 62D-2.54DS(70)
CR22C- 62D-2.54DS(70)
CR22A- 68D-2.54DS(70)
CR22A- 72D-2.54DS(70)
CR22A- 80D-2.54DS(70)
CR22A-100D-2.54DS(70)
CR22E-120D-2.54DS(70)
CL522-0064-1-70
CL522-0010-2-70
CL522-0012-8-70
CL522-0008-0-70
CL522-0072-0-70
CL522-0002-4-70
CL522-0004-0-70
CL522-0048-5-70
CL522-0014-3-70
CL522-0016-9-70
CL522-0060-0-70
CL522-0018-4-70
CL522-0020-6-70
CL522-0050-7-70
CL522-0006-5-70
CL522-0054-8-70
Note
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A5
CR22 Series●2.54mm Pitch Card Edge Connector
A B C D E F G H RoHS
■Right Angle Through hole Type
Unit: mm
Part Number CL No.
Number of Contacts
CR22 - 30D-2.54DSA(70)
CR22A- 30D-2.54DSA(70)
CR22 - 34D-2.54DSA(70)
CR22A- 34D-2.54DSA(70)
CR22 - 36D-2.54DSA(70)
CR22A- 44D-2.54DSA(70)
CR22 - 50D-2.54DSA(70)
CR22B- 50D-2.54DSA(70)
CR22 - 60D-2.54DSA(70)
CR22 - 62D-2.54DSA(70)
CR22A- 62D-2.54DSA(70)
CR22 - 68D-2.54DSA(70)
CR22 - 72D-2.54DSA(70)
CR22 -100D-2.54DSA(70)
CR22A-100D-2.54DSA(70)
CL522-0023-4-70
CL522-0034-0-70
CL522-0024-7-70
CL522-0035-3-70
CL522-0025-0-70
CL522-0037-9-70
CL522-0027-5-70
CL522-0045-7-70
CL522-0028-8-70
CL522-0029-0-70
CL522-0040-3-70
CL522-0030-0-70
CL522-0031-2-70
CL522-0033-8-70
CL522-0044-4-70
30
34
36
44
50
60
62
68
72
100
61.74
---------
66.82
---------
69.36
---------
87.14
84.71
99.84
102.38
---------
110.00
115.08
150.64
---------
54.14
---------
59.22
---------
61.76
---------
79.54
78.11
92.24
94.78
---------
102.40
107.48
143.04
---------
46.74
46.74
51.82
51.82
54.36
64.52
72.14
70.10
84.84
87.38
87.38
95.00
100.08
135.64
135.64
40.64
40.64
45.72
45.72
48.26
58.42
66.04
66.04
78.74
81.28
81.28
88.90
93.98
129.54
129.54
35.56
35.56
40.64
40.64
43.18
53.34
60.96
60.96
73.66
76.20
76.20
83.82
88.90
124.46
124.46
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.4
9.5
9.5
9.5
9.5
9.5
9.5
9.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
15.49
16.5
16.5
16.5
16.5
16.5
16.5
16.5
9
9
9
9
9
9
9
7.62
9
9
9
9
9
9
9
YES
Note : Mounting hole of CR22D
is design symmetry
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A6
CR22 Series●2.54mm Pitch Card Edge Connector
BPCB Dimensions
■PCB mounting pattern
Part Number
CR13-GPIN(A) 513-0010-1 Polyacetal White
CL No. Material Color
Note: Using the polarizing key prevents mis-insertion in the printed board.
To use the polarizing key, insert the polarizing key so as to hit the mold bottom.
12
A
B
22.86
27.84
Number of Contacts
30
35.56
40.54
34
40.64
45.62
36
43.18
48.16
44
53.34
58.32
50
60.96
65.94
60
73.66
78.64
62
76.20
81.18
68
83.82
88.80
72
88.90
93.88
80
99.06
104.04
100
124.46
129.44
120
149.86
154.69
Unit: mm
Unit: mm
■Polarizing Key
Note : The contact DSA type indicates 2.54mm±0.05.
30 to 45°30 to 45°
Note 1. The 120 contacts type indicates 154.69 . Note 2. The 120 contacts type indicates 2.415.
0
–0.25
CR13-GPIN(A)
12
A 22.86
Number of Contacts
30
35.56
34
40.64
36
43.18
44
53.34
50
60.96
60
73.66
62
76.2
68
83.82
72
88.9
80
99.06
100
124.46
120
149.86
:
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
