8 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION ) COPYRIGHT ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. MECHANICAL: LED 1 Top of PCB \ .600 MAX [NL LED2 [<< |-saal Suggested Panel Cutout D1 .010 1-6605418-1 SHIELD .1350 MIN 265 _ - ft ELECTRICAL: 417P10 SERIES MAGNETIC CIRCUIT A\ A\ () RCT TDP TCT to1/\ T1 See G T2 : = LOb-LOL %.062(2X) @.126(2X) : SHIELD D2 D3 .100 %.035 TYP 24 44 8 of NN L A I A oP P t .050 TYP t .100 TYP ~~ Pin Designations 050 TYP %.035(8X) L\ A\ x A .1603 ANODE (+) [ 7 TYP D4 LN R4 RJ-4 RJ-5 RJ-7 RJ-8 RXP | RJ-3 RXN | RJ-6 BH [Ld LED2 Suggested PCB Layout (Component Side) %.040(4X) 2/2 MIN] ~1 Loc DIST REVISIONS AA |22 [eyo DESCRIPTION DATE DWN APVD B ECO05-013676 11NOV2005| CG | DH MATERIALS: HOUSING - THERMOPLASTIC PET POLYESTER FLAMMABILITY RATING UL 94V-0. SHIELD - .010" THICK, C26800 BRASS PREPLATED WITH 30uINCH MIN SEMI-BRIGHT NICKEL. SOLDER TABS POST DIPPED WITH 100WINCH MIN SAC SOLDER. MOD JACK CONTACTS - 0.0157 X 0.018" PHOSPHOR BRONZE, 50uWINCH MIN OVERALL NICKEL UNDERPLATE WITH SELECT 50uINCH MIN HARD GOLD FINISH PLATE. SOLDERTAILS WITH 100uINCH MIN MATTE TIN AND/OR SAC SOLDER DIP. LIGHT EMITTING DIODE(LED) - DIFFUSED EPOXY LENS, .020" X .020" CARBON STEEL WIREFRAME LEADS PRE-PLATED WITH 80mINCH SILVER OVER 40uINCH NICKEL UNDERPLATE OVER 40mWINCH COPPER UNDERPLATE. POST-PLATED WITH 100uINCH MIN MATTE TIN AND/OR SAC SOLDER DIP OR PURE TIN SOLDER DIP. RJ45 JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68, SUB PART F. MAGNETICS -IMPEDANCE: 100 OHMS -TURNS RATIO (CHIP:CABLE): TX = 4:1, RX = 1:1 -OPEN CIRCUIT INDUCTANCE (OCL): 350H MIN @100kHz, 0.1VRMS, 8MADC BIAS FROM 0C TO 70C, TX AND RX -PERFORMANCE @ 25C: INSERTION LOSS (IL): 1.1dB MAX FROM 0.5MHz TO 100MHz RETURN LOSS (RL): 18dB MIN FROM 0.5MHZ TO 30MHz 18-20LOG(f/30)dB MIN FROM 30.1MHz TO 60MHz 12dB MIN FROM 60.1MHz TO 80MHz CROSSTALK ATTENUATION: 35dB MIN FROM 0.5MHz TO 40MHz 33-20*LOG(f/50)dB MIN FROM 40.1MHz TO 100MHz COMMON MODE REJECTION RATIO (CMRR): 30dB MIN FROM 0.5MHz TO 100MHz -ISOLATION VOLTAGE: COMPLIES WITH IEEE802.3 2002, PARA 23.5.1.1, ITEM a or Db. C1IS A 1000 pF, 2KV DECOUPLING CAPACITOR. OPERATING TEMPERATURE: FROM 0C 10 +70C R1-R4 = 75 OHMS, 1/16 W, 5% RESISTORS. LED COMPLIANT WITH IEC60825-1 SAFETY OF LASER PRODUCTS. WHEN OPERATED UP TO 20 mA. THE 250 OHM RESISTOR IS INCLUDED IN THE LEDS. INDICATED CONNECTIONS ARE FOR NIC CONFIGURATION. THE MAGNETICS ARE ASYMMETRICAL AND DO NOT SUPPORT AUTO-MDI/MDIX. LED PEAK WAVELENGTH: GREEN(a) = 565nm TRADEMARK, PART NUMBER, DATE CODE, COUNTRY OF ORIGIN AND AGENCY APPROVAL MARKING IN APPROXIMATE LOCATION SHOWN, GREEN GREEN 16605418-1 PART NUMBER eo] sso2A\ THIS DRAWING IS A CONTROLLED DOCUMENT. DWN OBMAR2005 G. ATTADIA DOCKS CHK OBMAR2005 Tyco Electronics Corporation Harrisburg, PA 17105-3608 tyco Electronics DIMENSIONS: INCHES OS TOLERANCES UNLESS D. FAROLE OTHERWISE SPECIFIED: APVD O8MAR2005 | NAME D. FAROLE PRODUCT SPEC oto 108-2100 1 005 APPLICATION SPEC 1X1 MAG45(TM), MODULAR JACK, SHIELDED, 4N2P10 SCHEMATIC, 417P10 MAGNETIC CIRCUIT, DECOUPLING CAPACITOR, WITH RESISTOR LEDS No vu Cc QO HEHEHE EE lool | SIZE CAGE CODE | DRAWING NO RESTRICTED TO +L MATERIAL f FINISH /\ WEIGHT _ A1 00779 G=660541 RB _ CUSTOMER DRAWING SAE ITS [OT 4 FY AMP 4805 REV 31MAR2000 ne