First Edition LCD Module Technical Specification Feb. 05, 2010 Final Revision Deke Tywenc. 1-99561D090J-LW-A-AAN Customer Customer's Product No OPTREX CORPORATION Approved : Checked : Prepared : Yasuo Kawasaki QUALITY ASSURANCE DIVISION Toshiaki Ochi Test Production Control G, Noboru Wada Design G, APPROVED By Signature : Date : Please return this specification within two month with your signature. If not returned within two month ,specification will be considered as having been accepted. T-55561DO90J-LVV-A-AAN OPTREX CORPORATION Page 1/35 OPTREX ConfidentialCONTENTS Item Page CONTENTS _ APPLICATION OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS oS RELIABILITY TEST CONDITION INSPECTION STANDARDS bo OTHER FEATURE co HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION PRODUCTS NUMBER LABELING FORMS LED UNIT for 9.0WVGA Revision History Rev. Date Page Comment T-55561DO90J-LVV-A-AAN OPTREX CORPORATION Page 2/35 OPTREX Confidential1. APPLICATION This specification applies to color TFT-LCD module, T-55561D090J-LW-A-AAN. These specification papers are the proprietary product of OPTREX CORPORATION COPTREX) and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, ete.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation. (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, they should first contact OPTREX sales representative for it's intended use in wriling. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult OPTREX sales representative for any questions regarding this product. T-55561DO90J-LVV-A-AAN OPTREX CORPORATION Page 3/35 OPTREX Confidential2. OVERVIEW T-55561D090J-LW-A-AAN is 9.0 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit or 8 bit digital data, 800 x 480, 262k-color or 16.7M-color images are displayed on the 9.0 diagonal screen. Input power voltage is 3.3V for LCD driving. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 30.4 MHz clock cycle. Driver circuit for LED backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Day re Ne = SSE Number of Dots 800 x 3 (ID x 480 (V) Pixel Pitch (mm) 0.246 (H) x 0.246 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally black IPS Number of Color 262k(6 bit/color), 16.7M(8 bit/color) Luminance (cd/m2) 400 Wide Viewing Angle Technology IPS Viewing Angle (CR > 10) 85~85(H), -85~85(V) Surface Treatment Anti-glare and hard-coating 3H Electrical Interface LVDS 6 bit/8 bit) Module Size (mm) 219.0 (W) x 136.2 (HD x 9.5 (D) Module Mass (g) 320 Backlight Unit LED, edge-light, replaceable Characteristic value without any note is typical value. T-55561 DO90J-LW-A-AAN OPTREX CORPORATION Page 4/35 OPTREX Confidential3. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX UNIT Power Supply Voltage for LCD VCC 0 4.0 Vv Logic Input Voltage VI -0.8 VCEC+0.8 Vv Backlight (LED) Current IF 0 180 mA Operation Temperature (Panel) Note 1,2) 'T'sp(Panel) 30 80 C Operation Temperature (Ambient) Nete2 | Topcambient) -30 80 C Storage Temperature Note 2) T ste 310) 80 C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C : 90%RH max. without condensation Top, Tstg > 40C : Absolute humidity shall be less than the value of 90%RH at 40C without condensation. 4, ELECTRICAL CHARACTERISTICS ) TFT-LCD Ambient temperature: Ta = 25C ITEM SYMBOL] MIN. TYP. MAX, UNIT Remarks Power Supply Voltages for LCD VCC 3.0 3.3 3.6 V *1) Power Supply Currents for LCD ICC 250 410 mA *92) Permissive Input Ripple Voltage VRP 100 mVp-p | VCC =4+3.8V High VIH 0.8xVCC VCC Vv MODE, SC Logic Input Voltage : : Low VIL 0 0.2xVCC Vv MODE, SC *1) Power and signals sequence: tl <10ms 200 ms < t4 0<t2<50ms 200 ms < td 0<t3<50ms 0<t6 VCC 0.9VCC LCD Power Supply Logic Signal 0.1VCC Backlight Power Supply data: RGB DATA, DCLK, DENA, MODE, SC T-55561 DOGOJ-LW-A-AAN OPTREX CORPORATION Page 5/35 OPTREX ConfidentialVCC-dip conditions: 1) When 2.6 V < VCC <3.0 V, td< 10 ms 2) When VCC < 2.6 V VCC-dip conditions should also follow the power and signals sequence. VCC ON *2) VCC = 43.3 V, fe=31.7 kHz, fv=60 Hz, fotk=30.4 MHz Display image at typical power supply current value is 256-gray-bar pattern (8 bit), 480 line mode. *3) Fuse Parameter Fuse Type Name Supplier Remark VCC FCC16162AB Kamaya Electric Co., Ltd. *) *) The power supply capacity should be designed to be more than the fusing current. (2) Backlight Ta = 25C ITEM SYMBOL| MIN. TYP. MAX. | UNIT Remarks (24) 30.2 Vv IF = 90 mA, Ta = 25C LED Voltage VF 31.3 Vv IF = 90 mA, Ta = 0C 32.6 Vv IF = 90 mA, Ta = -30C LED Current IF - 90 100 mA *1), *3) LED Life Time LT 60000 ~ ~ h * A), 5), Continuous onevation [Note] *1) Constant Current Drive *2) The Voltage deviation between strings: | Vr Viel < 2V *3) LED Current measurement method o1 Power Al Supply LCD C2 Power AQ Supply *4) LED life time is defined as the time when the brightness becomes 50% of the initial value. *5) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. T-55561DO90J-LVV-A-AAN OPTREX CORPORATION Page 6/35 OPTREX Confidential5. INTERFACE PIN CONNECTION (1) CN 1dnterface Signal) Used connector: FI-SE20P-HFE (JAE) Corresponding connector: FI-S20S[for discrete Wire], FI-SE2Z0MEl[for FPC] (JAE) Function (SP 6 bit compatibility mode) Function (SP 8 bit No. Symbol 6 bit input 8 bit input compatibility mode) 1 VCC +3.3 V Power supply < 2 VCC +3.3 V Power supply < 3 GND GND < 4 GND GND < 5 | Link 0O-| RO, R1, R2, R38, R4, R5, GO | R2, R38, R4, R5, RG, R7, G2 | RO, R1, R2, R38, R4, R5, GO 6 | Link 0+} RO, R1, R2, R38, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 7 GND GND < 8 | Link 1-| G1, G2, G3, G4, G5, BO, B1_| G8, G4, G5, G6, G7, B2, B38 | G1, G2, G3, G4, G5, BO, B1 9 | Link 14+} G1, G2, G3, G4, G5, BO, B1_ | G8, G4, G5, G6, G7, B2, B38 | G1, G2, G3, G4, G5, BO, B1 10 GND GND < 11 | Link 2-] B2, B3, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 12 | Link 2+] B2, B3, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 13 GND GND < 14_|CLKIN- Clock < 15 |CLKIN+ Clock + < 16 GND GND < 17_| Link8- | See: *2) RO, R1, GO, G1, BO, BI R6, R7, G6, G7, B6, B7 18 | Link3+ | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 19 | MODE Low=ISP 6 bit compatibilily mode litcona tibility mode 20 SC Scan direction control (Low=Normal, High=Reverse) *1) Metal frame is connected to signal GND. *2) Recommended wiring of Pin 17,18 ( bit input) LVDS transmitter LOW data . Pin 17 Pin 18 (2) CN 2(Backlight) Backlight-side connector: SMO6B-SHLS-TE(LF)(SN) GST) Corresponding connector: SHI.P-06V-S-B (JST) O vec 680 QO Pin 17 Pin 18 or 6200 Pin No. Symbol Tunction 1 NC This pin should be open. 2 NC This pin should be open. 3 LED C1 LED cathode 1 4 LEDA1 LED anode 1 5 LED A 2 LED anode 2 6 LED C 2 LED cathode 2 T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 7/35 OPTREX Confidential(3) ISP data mapping a. ISP 6 bit compatibility mode bit input) CLKINH- / LinkO-+/- Y X Y GO X RS Link14/- X X X BI Xx BO Link2+/- X X xX DENA X CLKINY- _/ / ' tne XXII YI tare XX IY YY EDV tse XX) 7A IEEE tae X YAAK c. LSP 8 bit co CLKINY. _/ | rio XX YO OTE YX YY ma XY NIE DYEYENEN mars XO Yor XOXO Yo Yo Yo Y wm XY YIN ITE EX =< CON T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 8/35 OPTREX Confidential6. INTERFACE TIMING LVDS transmitter input signal (1) Timing Specifications ITEM SYMBOL MIN TYP MAX UNIT Frequency foLk 25 30.4 45 MHz DCLK Period tek 22.2 32.9 40 ns Active Time tHa 800 800 800 tcLkK Blanking Time tHE 20 160 tcLK Horizontal Frequency fr 26.4 31.7 45 kHz Period tu 22.2 31.6 37.9 ys DENA Active Time tva 480 480 480 ty Blanking Time tvB 3 48 tH Vertical Frequency fv 55 60 75 Hz Period tv 13.3 16.7 18.2 ms [Note] 1) DENA (Data Enable) should always be positive polarity as shown in the timing specification. 2) DCLK should appear during all invalid period. 3) LVDS timing follows the timing specifications of LVDS receiver 1C: THC63LVDF84B(Thine). 4) In case of blanking time fluctuation, pleasc satisfy following condition. tvBn > tvBn-1 3tH) T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 9/35 OPTREX Confidential(2) Timing Chart a. Horizontal Timing Chart DCLK DATA (R,G,B) DENA SULA. First Data UU |_- Last Data Invalid Data 1 \ 3 X x j \ 0 aco Invalid Data \ typ tHA poled < v \\ b. Vertical Timing Chart LINE DATA DENA Invalid Data tvs AG tu=1/fa A ty=1/fv Vv. A Vv T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 10/35 OPTREX Confidential(3) Color Data Assignment _a.6 bit input INPUT DATA R DATA G DATA B DATA COLOR R5 | R4/R3) R2 > RL) RO| GS G4iG3!G2:G1_ Go] BS: Ba B83! Ba: Bl Bo MSB LSB |MSRB LSB |MSB LSB BLACK 0:0:0:0:;:0:0;/;0:0:0:0:0:0]0:0:0:;:0:0: 0 RED@3) Tilitltitlt: JTil;/0:0:0:0:0:;0/0:0:0:0:0: 0 GREEN@G3),}0:0:0:0:0:0/1:1:1:1:1:,1/0:0,0:0:0:0 BASIC |BLUE@3) 0:0:0:0:0:0]0:0:0:0:0:;:0]1:1:;:1:1:i1i:1 COLOR |CYAN 0:0:0:0:0:0;]1:212:21:1:1:1 P1id:idl:21:t1i1 MAGENTA | 1 1 1 ] ] 1 0:0:0:0:0: 07 1 1 ] 1 1 1 YELLOW didi til: Tityise Titi t:i ts ty}o:ao,;o0:0:0: 0 WHITE PTidilt:l:i: 3.231] 1:13)31:1:;1:;1 1Tidil:il:it1i1 RED) 0:0:0:0:0:1;/0:0:0:0:0:0]0:0:0:0:0: 0 REDQ) 0:0:0:0:1:0]0:0:0:0:0:0]0:0:0:0:0: 0 RED RED@2) tielie tit: 1:0/0:0:0:0: 0 0:0:0:0:0: 0 RED@3) 1-1: 1:1,51:51/0 0:0,0:0 0:0,.0:0:0 0 GREEN) 0:0:0:0:0:0]0:0:0:0:0:1;]0:0:;0:0:0: 0 GREENQ@) 0:0:0:0:0:0]0:0:0:0:1:0]0:0:0:0:0: 0 GREEN GREEN@2)|0:0:0:0:0:0]/1.-61:1:1:1,0/0:0.0:0:0:0 GREEN(@63)/,0:50:0:0:0:;0/1:1:1:1:1,1/0:0,0:0:0:0 BLUEQ) 0:0:0:0:0:0/0:0:0:0:0:0]0:0:0:0:0:1 BLUE@) 0:0:0:0:0:0]0:0:0:0:0:0]0:0:0:0: 1:0 BLUE BLUE@2) 0 0 1 1'1:1:51:0 BLUR3) Piti didi di [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 11/35 OPTREX ConfidentialINPUT DATA R DATA G DATA B DATA R7 iR6:R5iR4: R38: R2iR1: RO | G7 'G6!G5:iG4!G3:iG2iG1: GO | B7 !B6:B5:!B4:B3:!B2:B1 & a ee] LSB|MSB LSB]MSB BLACK i) oS Oo oS RED (255) GREEN(255) BLUE(255) CYAN MAGENTA YELLOW WHITE RED(1) Si@GTReirPiKPiDGdiG@iDdirYio DiO]TRiRPiRPidididir-rico DiPMyeriPiPiPdicdiDdirio CiOTeiePiPiDdDiGdidik:ad DiDMPreirPirPiGdicdiodi-ric DiP@]RiPiFPidididirico RP POPR rR PRP iD iDiDirFico DiPPePiRBeiFBidiadiDdir- SiSGPeireidirioi-ic DIiOPTRiRPidirPiodi-siacdiao CiOPReiePiDGie iPdiseiciao CIiOPRiPidiriodi-icioa SCiP@]RiPidiFPicdi-H:cdico DiC] RiRPidirPiodisaiacdio Ci@D]rRirPidirPidi-eicio STi iP idirPioqi-ico SCi@TreiqiPirpiFPio:ic DiPD]TrRidireiPi-PiDdiadio DTiPM@]reeidiyreikBPirPidiaqgia DiPM]rPidiPtikPtiFf:iDd:Dd:ia CTiPM@Iridir ie iP id:icd:icad DTiP@M@Iridieie iB id: Dic DiPDPRPidireiPiPidiadio Di@M]ReiDdifPtikb ike: DM: Q:O RED(2) RED(255) GREEN(1) GREEN(2) GREEN(255) BLUE() BLUE(2) BLUE(255) 0:0:0:0 [Note] 1) Definition of gray scale Color () ---n indicates gray scale level. Iligher n means brighter level. 2) Data 1:High, 0: Low T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 12/35 OPTREX Confidential(4) Display Position and Scan Direction D(X, Y) shows the data number of input signal. SC: Low SC: High DG) => D00,D D(800,480) <- D(,480) ee Dd,480) "5 D800, 480) D(g00,.) <2 pa, CN2 CN2 7. BLOCK DIAGRAM CN1 Timing signal Display data Timing Co control G1 , ontrover 5 Ae] @ 8 a ed eS TFT-LCD Oo Power 3 = LL Oo = G480 re > po oO Oo Q ao fel ita Power nO o Supply a Circuit Drivers(source) LED 2 C1 C2 T-55561D090J-LW-A-AAN OPTREX CORPORATION Page 13/35 OPTREX Confidential8. MECHANICAL SPECIFICATIONS () Front Side __ 1 a 00 <i m if - - 2 - - eg | Sy {0 bari >: < > -O 3B (s' 94) S* 97 0 coe L 5s c6 WF o a a _ wpe D CONINAdQ TiZ=8) /OZL (oeZ) (YSYHV =ATLDV) BO0R8LI ee | =o io | AO I | Te a | | 2 fg | | S bw @ oc of wo | | | 2 Be Oo OL ry Q EE E ~ ~o | 4G | A | oO | o| = . "Tl 2) a = _ Lu uu 2!) & 4 Lu <f > a | ( | oO} in | N\ | > \ ~~ J)o- Ne oO Wy ob hf- - - t - - |;7 N] ON lw} <t my) | | LI ~ a | | | s| -| Gc) oO} oO _ OF | : | | : o : Q I | o r | | | VY} | Ld e a) NY as a =) _ Ne 3 (1-09) L"e9 a & c we ~ - ' Oo 298! = st 2 28 (7'0) < ; . oO , eo =< (s' or) S SP <5 Se Zz oO o ea Oo y a <x [et <r 19 S E = Xk ~ fom aL a _ ty MN QO 0 ~ rn A a a | Suc A a pe PbS Los nit: mm (Unit ) T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 14/35 OPTREX Confidential(2) Rear Side <f Lu a . << DoD <-> 4 ( | ] HI P Cc = w g g Ww Bs \ SE VIF wo - . : : ce P a N fh >o \ - 1 : . 5 +t c . \ 2 LO RSs RQ_aunynrs a RRQ \ i ao RQQQXRAQANAAA wre RQQRAAAAAARA a RQ aw MQQQQQLARRAY u SIAN SSSA, 7 ANXAASAAAN QQddsr xvQ NAXAXANSANAN RQQXAQARROY ae RX XXSAAANS AN AXXKAS AAAS. co RQQQ\ _qQ_v c SQ QQ co XA RQQO YOO oe SS SQN WX To l \ oc SS tr FE : SX lok , a oO LK OQd Zz Ml NO Ww AN oO om~ ANS SAY. v SAA = st LXQx | il _ \ => / . / Oo V4 Af. _ _ i4 a Ol | | BK S WY 2 ~ > c L | q an _ } | ak ) = [1 ua (J ) i h f a <u | uw UWF ~ . Los 9 9 mn = ~ 1 . at B OV On = 4 a B SS Pot e wo ( SS } rc Mo oD 1a : 7-35 A Lv il TX ee Ola WY n uy lf 2 Ss Zz Oa sy A Zz CO (Unit: mm) T-55561 DO90J-LW-A-AAN OPTREX CORPORATION Page 15/35 OPTREX Confidential9. OPTICAL CHARACTERISTICS Ta=25C, VCC=3.8V, Input Signals: Typ. values shown in Section 6 ITEM SYMBOL |CONDITION| MIN TYP MAX | UNIT |Remarks Contrast Ratio CR Ov=0, OH=0 | 580 900 -- -- |*1)*2)*5) Luminance Lw Ov=0, 6u=0 320 A400 - ed/m2 | *1)*5) Luminance Uniformity ALw Ov=0, O11=0 - -- 30 % |*1)*3)*5) / tr Ov=0, 6u=0 - 12 - ms |*1)*4)*5) Response Time tf Ov=0, GH=0 - 12 7 ms |*1)*4)*5) Viewin: Tlorizontal 0 -70~70 | 85~85 - *1)*5 s orion a H CR>10 )*5) Angle Vertical Ay -~70~70 | -85~85 -- *1)*5) Image sticking tis 2h -- -- 2 s *6) Rx 0.597 0.637 0.677 Red Ry 0.281 0.321 0.361 Color Gx 0.279 0.319 0.359 Green *#7)eR Coordinates Gy Ov=0, O1=0 | 0.591 0.631 0.671 - 1)*5) Bx 0.112 0.152 0.192 Blue By 0.028 0.068 0.108 White Wx 0.278 0.318 0.353 Wy 0.289 0.329 0.369 [Note] These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(&LDIM) for viewing angle and CS1000 or BM-5ACTOPCON) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the backlight unless noted. Condition: 1K = 90 mA Measurement method for luminance and color coordinates is as follows. Photodetector . Luminance :9=2 (BM-5A) 0 (Field : Y (Field) Color coordinates :9=1 (CS1000) TFT-LCD module | 500 mm The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 16/35 OPTREX Confidential*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below (1,1) 200 400 600 1 2 120 oo OD 5 240 a 3 4 360 Dp oo (800,480) *2) Definition of Contrast Ratio CR= Luminance with all white pixels / aminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *A) Definition of Response Time White Luminance 10% Black 10% *5) Definition of Viewing Angle @y, 9x) Normal Axis ----+---- I._---. Right (+) LCD panel Lower() T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 17/35 OPTREX Confidential*6) Image sticking: Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. Tosseeesaetenneneevansenssteraneenaseunenetensnesnseeael Il Black Lines TEST PATTERN FOR IMAGE STICKING TEST T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 18/35 OPTREX Confidential10. RELIABILITY TEST CONDITION (1) Temperature and Humidity ITEM CONDITIONS TIGIT TEMPERATURE 40C, 90%RIT, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 80C, 240 h LOW TEMPERATURE OPERATION 30C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE 30C, 240 h THERMAL SHOCK (NON-OPERATION) ~30C Gh) ~ 80C(Ah), 100 cycles (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470 m/s? (150G) SHOCK Waveform: half sinusoidal wave, 2 ms (NON-OPERATION) | Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8 m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500 Hz (NON-OPERATION) | Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 IIz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (83) Judgment standard The judgment of the above tests should be made as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 19/35 OPTREX Confidential12. OTHER FEATURE This LCD module complies with RoHS directive. * RoHS: Restriction of the use of certain hazardous substances in electrical and electronic equipment T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 21/35 OPTREX Confidential13. HANDLING PRECAUTIONS FOR TFT-LCD MODULE Please pay attention to the followings in handling TFT-LCD products: (1) ASSEMBLY PRECAUTION a. Please mount the LCD module by using mounting hole with a screw clamping torque less than 0.2 Nm. Please do not bend or wrench the LCD module in assembling. Please do not drop, bend or twist the LCD module in handling. b. Please design display housing in accordance with the following guide lines. (a) Housing case must be designed carefully so as not to put stresses on LCD and not to wrench module. (b) Under high temperature environment, performance and life time of LED may heavily shorten. When you design with our LCD product, please consider radiating heat and ventilation for good heat management. (c) Keep sufficient clearance between LCD module back surface and housing when the LCD module is mounted. Approximately 1.0mm of the clearance in the design is recommended taking into account the tolerance of LCD module thickness and mounting structure height on the housing. (d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to be reconsidered when the additional parts are implemented for EMI countermeasure. (e) Design the LED driver location and connector position carefully so as not to give stress to LED backlight cable. (f) Keep sufficient clearance between [.CD module and the others parts, such as inverter and speaker so as not to interfere the LCD module. Approximately 1.0 mm of the clearance in the design is recommended. (g) To avoid local elevation/decrease of temperature, considering location of heating element, heat release, thermal design should be done. c. Please do not push or scratch LCD panel surface with anything hard. And do not soil LCD panel surface by touching with bare hands. (Polarizer film, surface of LCD panel is easy to be flawed.) d. Please wipe off LCD pancl surface with absorbent cotton or soft cloth in case of it being soiled. e. Please wipe off drops of adhesives like saliva and water on LCD panel surface immediately. They might damage to cause panel surface variation and color change. f. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing modules may cause them not to work well. T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 22/35 OPTREX Confidentialg. Please do not touch metal frames with bare hands and soiled gloves. A color change of the metal frames can happen during a long preservation of soiled LCD modules. h. Please handle metal frame carefully because edge of metal frame is very sharp. i. Please connect the metal frame of LCD module to GND in order to minimize the cffect of external noise and EMI. j. Be sure to connect the cables and the connecters correctly, (2) OPERATING PRECAUTIONS a. Please be sure to turn off the power supply before connecting and disconnecting signal input cable. b. Please do not change variable resistance settings in LCD module. They are adjusted to the most suitable value. If they are changed, it might happen LCD does not satisfy the characteristics specification. c. The interface signal speed is very high. Please pay attention to transmission line design and other high speed signal precautions to satisfy signal specification. d. A condensation might happen on the surface and inside of LCD module in case of sudden change of ambient temperature. Please take care so as not to cause any damage mentioned on ()-d. e. Please pay attention not to display the same pattern for very long time. Image might stick on LCD. Even if image sticking happens, it may disappear as the operation time proceeds. f. Please obey the same safe instructions as ones being prepared for ordinary electronic products. (3) PRECAUTIONS WITH ELECTROSTATICS a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be affected by electrostatics. Please be careful with electrostatics by the way of your body connecting to the ground and so on. b. Please remove protection film very slowly from the surface of LCD module to prevent from electrostatics occurrence. (4) STORAGE PRECAUTIONS LCD should be stored in the room temperature environment. with normal humidity. The LCD inventory should be processed by first-in first-out method. T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 23/35 OPTREX Confidential(5) SAFETY PRECAUTIONS a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces and wash them off with solvents such as acctone and cthanol, which should later be burned. b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off thoroughly with soap and water. c. Be sure to turn off the power supply when inserting or disconnecting the LED backlight cable. d. LED driver should be designed carefully to limit or stop its function when over current is detected on the LED. (6) OTHERS a. A strong incident light into LCD panel may cause deterioration to polarizer film, color filter, and other materials, which will degrade the quality of display characteristics. Please do not expose LCD module under strong Ultraviolet rays for a long time. b. Please pay attention to a panel side of LCD module not to contact with other materials in preserving it alone. c. For the packaging box handling, please see and obey with the packaging specification datasheet. cd. Please do not reuse the LED unit which is once removed. T-55561DO90J-LW-A-AAN OPTREX CORPORATION Page 24/35 OPTREX Confidential