Electric Double Layer Capacitors (Gold Capacitor) Stacked Coin Type Series : Notrecommendedfornewdesign SE Low temperature assured product Features Endurance : +70 C 1000 h temperature range : -40 C to +70 C Automatic insertion available RoHS compliant Category Recommended applications Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. Specifications Category temp. range -40 C to +70 C Maximum operating voltage 5.5 V.DC Nominal cap.range 0.22 F Capacitance change 30 % of initial measured value at +20 C (at -40 C) Characteristics at low temperature Internal resistance < 7 times of initial measured value at +20 C (at -40 C) After 1000 hours application of 5.5 V.DC at +70 C, the capacitor shall meet the following limits. Endurance Capacitance change 30 % of initial measured value Internal resistance < 4 times of initial specified value After 1000 hours storage at +70 C without load, the capacitor shall meet the specified limits for Endurance. Shelf life Dimensions in mm(not to scale) 5.40.8 h h1 10.5 max. P - + fd + W W1 W0 H0 P1 F - W2 13.4 max. H1 P2 P0 fD0 (Unit : mm) Dimensions Nominal Tolerance 0d P0 F W W0 W1 W2 H0 0D0 P P1 P2 h, h1 H1 0.55 12.7 5.0 18.0 5.5 < 9.0 0 to 3.0 16.4 4.0 12.7 3.85 6.35 0 30.3 > 0.05 0.2 +0.8 -0.2 0.5 - 0.5 - 0.5 0.2 1.0 0.50 1.00 1.0 - Characteristics list Maximum operating Capacitance voltage (F) (V.DC) 0.22 5.5 Capacitance tolerance (F) 0.176 to 0.396 Internal resistance Recommended (Initial specified value) discharge current () at 1kHz (A) < 75 300 or less Part number EECSE0H224N Min. Mass packaging (Reference value) q'ty (g) (pcs) 1.0 1000 Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to affix the adhesive glue, the capacitor's surface temperature should not exceed 100 C for more than 60 seconds (maximum temperature should not exceed 105 C) 3. Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to the page of "Application guidelines". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Jan. 2016 Electric Double Layer Capacitors (Gold Capacitor) Stacked Coin Type Series : SE Features Endurance : +70 C 1000 h insertion available RoHS compliant Automatic Recommended applications Memory back-up for video and audio equipment,cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. Specifications Category temp. range -25 C to +70 C Maximum operating voltage 5.5 V.DC Nominal cap.range 0.22 F Capacitance change 30 % of initial measured value at +20 C (at -25 C) Characteristics at low temperature Internal resistance < 5 times of initial measured value at +20 C (at -25 C) After 1000 hours application of 5.5 V.DC at +70 C, the capacitor shall meet the following limits. Endurance Capacitance change 30 % of initial measured value Internal resistance < 4 times of initial specified value After 1000 hours storage at +70 C without load, the capacitor shall meet the specified limits for Endurance. Shelf life Dimensions in mm(not to scale) 5.40.8 h h1 10.5 max. P - + fd - + W W1 W0 H0 P1 F W2 13.4 max. H1 P2 P0 fD0 (Unit : mm) Dimensions Nominal Tolerance 0d P0 F W W0 W1 W2 H0 0D0 P P1 P2 h, h1 H1 0.55 12.7 5.0 18.0 5.5 < 9.0 0 to 3.0 16.4 4.0 12.7 3.85 6.35 0 30.3 > 0.05 0.2 +0.8 -0.2 0.5 - 0.5 - 0.5 0.2 1.0 0.50 1.00 1.0 - Characteristics list Maximum operating Capacitance voltage (F) (V.DC) 0.22 5.5 Capacitance tolerance (F) 0.176 to 0.396 Internal resistance Recommended (Initial specified value) discharge current () at 1kHz (A) < 75 300 or less Part number EECSE0H224 Min. Mass packaging (Reference value) q'ty (g) (pcs) 1.0 1000 Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to affix the adhesive glue, the capacitor's surface temperature should not exceed 100 C for more than 60 seconds (maximum temperature should not exceed 105 C) 3. Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to the page of "Application guidelines". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Jan. 2016