Special
Purpose
D-3
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
D
Grommet Sealing Plugs
MS27488 Type
Size 0 Through 23
SEALING
PLUG
UNWIRED
CONTACT
Installation of Sealing Plugs
“When installing sealing plug in connector cavities
without contacts, the end opposite the knob shall
be inserted rst and the knob shall be seated against
the grommet face. When installing into cavities with
contacts, the sealing plugs shall be installed knob end
rst and shall bottom on the contact wire barrel.”
(NAVAIR 01-1A-505–1 Installation manual)
Here's
a Tip!
Grommet Sealing Plugs
Grommet sealing plugs are used to seal unwired contact cavities. The size #23 sealing plug is specially
designed to t Glenair Series 80 Mighty Mouse grommets. Sizes 20 through 0 plugs conform to
MS27488 requirements. After installing unwired contacts into unused cavities, insert knob end
of sealing plug into grommet until it bottoms against the unwired contact per illustration. Install
sealing plugs with standard contact insertion/extraction tools . Size #23 plug is polyphenylsulphone,
other sizes are per MS27488 requirements.
Fig. Size Color
Part
Number
Military Part
Number
Insertion/
Extraction Tool
A Ref. B Ref. C Ref. D Ref.
in. mm. in. mm. in. mm. in. mm.
# Black - (None) M/-
. . . . . . . .
# Red - MS-- M/-
. . . . . . . .
# Green - MS-- M/-
. . . . . . . .
# Orange - MS-- M/-
. . . . . . . .
N/A # Red MS-- Not Recommended
. . . . . . . .
N/A # Blue MS-- Not Recommended
. . . . . . . .
N/A # Yellow MS-- Not Recommended
. . . . . . . .
12 4
3
B
Ø A
Ø C
D
