The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ITS-P-07027W MS-162A Series RF switch for interface use Low profile 2.5 mm Max. Light weight 0.043 g Small size Features 1. Small size: 2.48 x 3.1 x 3.5 mm Occupied mounting area: 3.5 x 4.0 mm 2. Light weight: 0.043 g 3. Durability: 12,000 cycles 4. High electrical performance up to 10 GHz 3.1 5. Wide self alignment: 0.5 mm 3.5 6. Satisfies RoHS requirements Halogen-free*, Beryllium-free product 2.48 Occupied mounting area 4.0 MSMS-162A 5 3. 0 4. 3.5 14.0 mm2 V.S.W.R & Insertion Loss (Typical data) Normally open (Mated condition**) 1.8 1.6 1.4 1.2 1.0 DC V.S.W.R. 2 6 4 Frequency [GHz] 8 10 0.0 0.2 0.4 0.6 0.8 Insertion Loss 1.8 1.6 1.4 1.2 1.0 V.S.W.R. DC 2 6 8 4 Frequency [GHz] 10 **Tested in the mated condition with MS-162-HRMJ-1. *MS-162A is defined as halogen-free product in accordance with IEC61249-2-21. (Br: 900 ppm Max., Cl: 900 ppm Max., total concentration of Br and Cl: below 1500 ppm) Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings or availabilities. Issued: June 4, 2008 Insertion Loss (dB) Insertion Loss Insertion Loss (dB) 0.0 0.2 0.4 0.6 0.8 V.S.W.R. V.S.W.R. Normally closed (Unmated condition)