SPEC NO: DSAJ8993 REV NO: V.2 DATE: DEC/30/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.Zhu ERP: 1203010038
1.6X0.8mm SMD CHIP LED LAMP (0.25mm
Height)
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APG1608ZGC/E Green
Features
z1.6mmX0.8mm SMT LED, 0.25mm thickness.
zLow power consumption.
zWide viewing angle.
zCompatible with automatic placement equipment.
zIdeal for backlight and indicator.
zPackage: 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Green source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Applications
1.Mobile phone Keypad indicator and backlight.
2.Flat backlight for LCD, switch and symbol.
3.Toys.
SPEC NO: DSAJ8993 REV NO: V.2 DATE: DEC/30/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.Zhu ERP: 1203010038
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APG1608ZGC/E Green (InGaN) WATER CLEAR 280 650 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 520 nm IF=20mA
λD [1] Dominant Wavelength Green 525 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 35 nm IF=20mA
C Capacitance Green 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 3.2 4 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAJ8993 REV NO: V.2 DATE: DEC/30/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.Zhu ERP: 1203010038
Green APG1608ZGC/E
SPEC NO: DSAJ8993 REV NO: V.2 DATE: DEC/30/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.Zhu ERP: 1203010038
APG1608ZGC/E
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ8993 REV NO: V.2 DATE: DEC/30/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.Zhu ERP: 1203010038
PACKING & LABEL SPECIFICATIONS APG1608ZGC/E
