Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (GND to V
EE
−, and Any Pin) −70V
Positive Input Voltage (Input to GND) 20V
Negative Input Voltage (Input to V
EE
−) −5V
Differential Voltage (+ IN to − IN) ±20V
Inductive Load L
L
≤5h
I
L
≤50 mA
Output Current −100 mA
Storage Temperature −65˚C to +150˚C
Maximum Power Dissipation (Note 2) at 25˚C
Cavity Package 1433 mW
Molded Dip Package 1398 mW
SO Package 1002 mW
Lead Temperature (Soldering, 4 seconds) 260˚C
Recommended Operating
Conditions
Min Max Units
Supply Voltage (GND to V
EE
−) −10 −60 V
Input Voltage (Input to GND) −20 20 V
Logic ON Voltage (+IN)
Referenced to −IN 2 20 V
Logic OFF Voltage (+IN)
Referenced to −IN −20 0.8 V
Temperature Range −25 +85 ˚C
Electrical Characteristics (Notes 3, 4)
Symbol Parameter Conditions Min Typ Max Units
V
IH
Logic “1” Input Voltage 2.0 1.3 V
V
IL
Logic “0” Input Voltage 1.3 0.8 V
I
INH
Logic “1” Input Current V
IN
=2V
V
IN
=7V 40
375 100
1000 µA
µA
I
INL
Logic “0” Input Current V
IN
= 0.4V
V
IN
= −7V −0.01
−1 −5
−100 µA
µA
V
OL
Output ON Voltage I
OL
= 50 mA −1.6 −2.1 V
I
OFF
Output Leakage V
OUT
=V
EE
−−2 −100 µA
I
FS
Fail-Safe Output Leakage V
OUT
=V
EE
−
(Inputs Open) −2 −100 µA
I
LC
Output Clamp Leakage Current V
OUT
= GND 2 100 µA
V
C
Output Clamp Voltage I
CLAMP
= −50 mA
Referenced to V
EE
−−2 −1.2 V
V
P
Positive Output Clamp Voltage I
CLAMP
=50mA
Referenced to GND 0.9 1.2 V
I
EE(ON)
ON Supply Current All Drivers ON −2 −4.4 mA
I
EE(OFF)
OFF Supply Current All Drivers OFF −1 −100 µA
t
PD(ON)
Propagation Delay to Driver ON L = 1h, R
L
= 1k,
V
IN
= 3V Pulse 110µs
t
PD(OFF)
Propagation Delay to Driver OF L = 1h, R
L
= 1k,
V
IN
= 3V Pulse 110µs
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range”,
they are not meant to imply that the device should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.
Note 2: Derate cavity package 9.6 mW/˚C above 25˚C, derate molded dip package 11.2 mW/˚C above 25˚C, derate SO package 8.02 mW/˚C above 25˚C.
Note 3: Unless otherwise specified, the min/max limits of the table of “Electrical Characteristics” apply within the range of the table of “Operating Conditions”. All
typical values are given for VEE−= 52V, and TA= 25˚C.
Note 4: All currents into device pins shown as positive, out of the device as negative. All voltages are referenced to ground unless otherwise noted.
DS3680
www.national.com 2