DM9328J/883 - National Semiconductor

TL/F/9793

9328/DM9328 Dual 8-Bit Shift Register

June 1989

9328/DM9328 Dual 8-Bit Shift Register

General Description

The ’9328 is a high speed serial storage element providing

16 bits of storage in the form of two 8-bit registers. The

multifunctional capability of this device is provided by sever-

al features: 1) additional gating is provided at the input to

both shift registers so that the input is easily multiplexed

between two sources; 2) the clock of each register may be

provided separately or together; 3) both the true and com-

plementary outputs are provided from each 8-bit register,

and both registers may be master cleared from a common

input.

Connection Diagram

Dual-In-Line Package

TL/F/9793–1

Order Number 9328DMQB, 9328FMQB or DM9328N

See NS Package Number J16A, N16E or W16A

Logic Symbol

TL/F/9793–2

VCC ePin 16

GND ePin 8

Pin Names Description

S Data Select Input

D0, D1 Data Inputs

CP Clock Pulse Input (Active HIGH)

Common (Pin 9)

Separate (Pins 7 and 10)

MR Master Reset Input (Active LOW)

Q7 Last Stage Output

Q7 Complementary Output

C1995 National Semiconductor Corporation RRD-B30M115/Printed in U. S. A.

Absolute Maximum Ratings (Note)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales

Office/Distributors for availability and specifications.

Supply Voltage 7V

Input Voltage 5.5V

Operating Free Air Temperature Range

Military b55§Ctoa

125§C

Commercial 0§Ctoa

70§C

Storage Temperature Range b65§Ctoa

150§C

Note:

The ‘‘Absolute Maximum Ratings’’ are those values

beyond which the safety of the device cannot be guaran-

teed. The device should not be operated at these limits. The

parametric values defined in the ‘‘Electrical Characteristics’’

table are not guaranteed at the absolute maximum ratings.

The ‘‘Recommended Operating Conditions’’ table will define

the conditions for actual device operation.

Recommended Operating Conditions

Symbol Parameter Military Commercial Units

Min Nom Max Min Nom Max

VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V

VIH High Level Input Voltage 2 2 V

VIL Low Level Input Voltage 0.8 0.8 V

IOH High Level Output Current b0.4 b0.4 mA

IOL Low Level Output Current 16 16 mA

TAFree Air Operating Temperature b55 125 0 70 §C

ts(H) Setup Time HIGH or LOW 20 20 ns

ts(L) Dnto CP 20 20

th(H) Hold Time HIGH or LOW 0 0 ns

th(L) Dnto CP 0 0

tw(H) Clock Pulse Width HIGH 25 25 ns

tw(L) or LOW 25 25

tw(L) MR Pulse Width with CP HIGH 30 30 ns

tw(L) MR Pulse Width with CP LOW 40 40 ns

trec Recovery Time MR to CP 33 33 ns

Electrical Characteristics

Over Recommended Operating Free Air Temperature Range (Unless Otherwise Noted)

Symbol Parameter Conditions Min Typ Max Units

(Note 1)

VIInput Clamp Voltage VCC eMin, IIeb

12 mA b1.5 V

VOH High Level Output Voltage VCC eMin, IOH eMax 2.4 3.4 V

VIL eMax

VOL Low Level Output Voltage VCC eMin, IOL eMax 0.2 0.4 V

VIH eMin

IIInput Current @Max Input Voltage VCC eMax, VIe5.5V 1 mA

IIH High Level Input Current VCC eMax, VIe2.4V 40

MR,D

nInputs

CP Inputs 60 mA

S Inputs 80

CP (COM) Inputs 120

IIL Low Level Input Current VCC eMax, VIe0.4V b1.6

MR,D

nInputs

CP Inputs b2.4 mA

S Inputs b3.2

CP (COM) Input b4.8

Electrical Characteristics

Over Recommended Operating Free Air Temperature Range (Unless Otherwise Noted) (Continued)

Symbol Parameter Conditions Min Typ Max Units

(Note 1)

IOS Short Circuit VCC eMax MIL b20 b70 mA

Output Current (Note 2) COMM b20 b70

ICC Supply Current VCC eMax 77 mA

Note 1: All typicals are at VCC e5V, TAe25§C.

Note 2: Not more than one output should be shorted at a time.

Switching Characteristics

VCC ea

5.0V, TAea

25§C (See Section 1 for waveforms and load configurations)

CLe15 pF

Symbol Parameter RLe400XUnits

Min Max

fmax Maximum Shift Right Frequency 20 MHz

tPLH Propagation Delay 20 ns

tPHL CP to Q7 or Q735

PHL Propagation Delay MR to Q7 50 ns

Functional Description

The two 8-bit shift registers have a common clock input (pin

9) and separate clock inputs (pins 10 and 7). The clocking

of each register is controlled by the OR function of the sep-

arate and the common clock input. Each register is com-

posed of eight clocked RS master/slave flip-flops and a

number of gates. The clock OR gate drives the eight clock

inputs of the flip-flops in parallel. When the two clock inputs

(the separate and the common) to the OR gate are LOW,

the slave latches are steady, but data can enter the master

latches via the R and S input. During the first LOW-to-HIGH

transition of either, or both simultaneously, of the two clock

inputs, the data inputs (R and S) are inhibited so that a later

change in input data will not affect the master; then the now

trapped information in the master is transferred to the slave.

When the transfer is complete, both the master and the

slave are steady as long as either or both clock inputs re-

main HIGH. During the HIGH-to-LOW transition of the last

remaining HIGH clock input, the transfer path from master

to slave is inhibited first, leaving the slave steady in its pres-

ent state. The data inputs (R and S) are enabled so that new

data can enter the master. Either of the clock inputs can be

used as clock inhibit inputs by applying a logic HIGH signal.

Each 8-bit shift register has a 2-input multiplexer in front of

the serial data input. The two data inputs D0 and D1 are

controlled by the data select input (S) following the Boolean

expression:

Serial data in: SDeSD0 aSD1

An asynchronous master reset is provided which, when acti-

vated by a LOW logic level, will clear all 16 stages indepen-

dently of any other input signal.

Shift Select Table

INPUTS OUTPUT

SD0D1Q7(t

)

LL X L

LH X H

HX L L

HX H H

HIGH Voltage Level

LeLOW Voltage Level

XeImmaterial

na8eindicates state after eight clock pulse

Logic Diagram

TL/F/9793–3

Physical Dimensions inches (millimeters)

16-Lead Ceramic Dual-In-Line Package (J)

Order Number 9328DMQB

NS Package Number J16A

16-Lead Molded Dual-In-Line Package (N)

Order Number DM9328N

NS Package Number N16E

9328/DM9328 Dual 8-Bit Shift Register

Physical Dimensions inches (millimeters) (Continued)

16-Lead Ceramic Flat Package (W)

Order Number 9328FMQB

NS Package Number W16A

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life

systems which, (a) are intended for surgical implant support device or system whose failure to perform can

into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life

failure to perform, when properly used in accordance support device or system, or to affect its safety or

with instructions for use provided in the labeling, can effectiveness.

be reasonably expected to result in a significant injury

to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309

Arlington, TX 76017 Email: cnjwge

tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408

Tel: 1(800) 272-9959 Deutsch Tel: (

49) 0-180-530 85 85 Tsimshatsui, Kowloon

Fax: 1(800) 737-7018 English Tel: (

49) 0-180-532 78 32 Hong Kong

Fran3ais Tel: (

49) 0-180-532 93 58 Tel: (852) 2737-1600

Italiano Tel: (

49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.