S/MON/SC864110/A/30/12/1999 page 1 /2 F/GB Relais statique monophase de puissance Power Solid State Relay SC864110 5-30VDC control 50A/400VAC output * Sortie AC synchrone : 24-520VAC-50A * Possibilite de protection IP20 en option : Capot 1K460000 * Adapte a tout type de charges * 24-520VAC -50A Zero-Cross AC Output. * IP20 Protection optional (1K460000). * Designed for all types of loads Dimensions/Size Application typique/Typical application 27 0,5 24-520VAC 22,8 28 O4,7 19,6 M4 - 2~ + 3+ 7,5 4- 25,4 44,5 1 3+ 2 * 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000 5,1 25,8 4- Entree control 5-30VDC 47,6 43,2 58,2 1~ protection reseau line protection M3 CHARGE/ LOAD TOLERANCES 0,3 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Symbol Uc Ic Uc off Rc Urv Min 5 3 1 fig. 1 :Caracteristique d'entree / Control characteristic fig1 : Caracteristique d'entree / Control characteristic Max 30 30 1000 30 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/Rated impulse voltage Uimp 4000 Unit V mA V V VRMS VRMS V Ic (mA) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage DC Nom 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc (V) Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g C C celduc r e l a i s S/MON/SC864110/A/30/12/1999 page 2 / 2 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity Conditions Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Symbol Typ. Unit Ue 400 V rms Uemin-max 24-520 V rms Up 1200 V Usync 12 V Ua 10 V Ie AC-51 50 A rms Ie AC-53 12 A rms Itsm 550 A Vd 1,4 V Ilk <3 mA Ie min 5 mA ton max 10 ms toff max 10 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 1500 A2s 2kV criterion A 2kV crit.A with external VDR T case max (C) Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 100 0,55K/W 0,75K/W 0,3K/W 70 75 90 0,95K/W 80 80 85 70 Full on state 1,1K/W 90 60 95 1,6K/W 50 100 40 50% on state 2,2K/W 30 20 6K/W 10 0 0 5 10 15 20 25 30 35 40 45 50 55 60 0 10 20 30 40 50 60 RMS load current : I (A) Itsm (Apeak) 400 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. 200 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0,1 1 t (s) 80 90 100 110 120 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 50A(Itsm=550A) Surge current : Itsm (Apeak) = f(t) for 50A models with Itsm =550A 600 0 0,01 70 Ambient temperature : Tamb (C) 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19