Solid Tantalum Chip Capacitors
TANTAMOUNT® High Temperature, Molded Case
TH3
Vishay Sprague
Document Number: 40084 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 30-Nov-07 63
FEATURES
•Operating Temperature up to 150 °C with
50 % voltage derating
•High Reliability
•RoHS compliant terminations available:
Matte Tin or Gold
•Standard EIA 535BAAC case sizes (A through E)
•100 % Surge Current Tested (B, C, D, E case sizes)
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 150 °C
Note: Refer to doc. 40088
Capacitance Range: 0.33 µF to 220 µF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 6.3 VDC to 50 VDC
* Pb containing terminations are not RoHS compliant, exemptions may apply
ORDERING INFORMATION
TH3 D 106 K 035 C XXXX
TY P E C A S E
CODE
CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION AND
PACKAGING
SPECIAL
REQUIREMENTS
See
Ratings
and Case
Codes
Ta b l e
This is expressed in
picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow
K = ± 10 %
M = ± 20 %
This is expressed in V. To
complete the three-
digit block, zeros precede
the voltage rating. A
decimal point is indicated
by an “R”
(6R3 = 6.3 V)
A: Gold/7" (178 mm) reels
B: Gold/13" (330 mm) reels
C: Matte Tin/7" (178 mm) reels
D: Matte Tin/13" (330 mm) reels
E: Tin/lead/7" (178 mm) reels
F: Tin/lead/13" (330 mm) reels
Additional
characters are
added for special
requirements
Note: We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
A 3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B 3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D 7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30
0.158 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
L
T MIN.
H
HWT
W
P
Available
Pb-free
RoHS
*
COMPLIANT
TH3
Vishay Sprague Solid Tantalum Chip Capacitors
TANTAMOUNT® High Temperature, Molded Case
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40084
64 Revision: 30-Nov-07
RATINGS AND CASE CODES
µF 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.33 A
0.47
0.68
1.0 A A A/B B C
1.5 C
2.2 A A A/B B C
3.3 A/B C C
4.7 A/B B C C C/D D
6.8 B/C D
10 A/B/C CCB/C/D D D/E
15 C/D D
22 BB/C/DD D D/E
33 D D D
47 D C/D D/ED/E
68 BC/D D
100 D E
150
220 E
Note:
Preliminary values in bold. Contact factory for availability.
MARKING
“A” CASE VOLTAGE CODE
VCODE
4.0 G
6.3 J
10 A
16 C
20 D
25 E
35 V
50 T
Marking:
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Call the factory for further explanation.
Capacitance
Code, pF
Indicates
High Temperature
Polarity Band
Voltage
Code
V 104H
A Case
Date Code Vishay
Sprague
Logo
Indicates High Temperature
Voltage
Capacitance µF
Polarity
Band 22 H10
XX
2
B, C, D, E Case
B,C, D, E
Document Number: 40084 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 30-Nov-07 65
TH3
Solid Tantalum Chip Capacitors
TANTAMOUNT® High Temperature, Molded Case Vishay Sprague
RATINGS AND PART NUMBER REFERENCE
CAPACITANCE
(µF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(µA)
MAX. DF
AT + 25 °C
(%)
MAX. ESR
AT + 25 °C
100 kHz (Ω)
MAX. RIPPLE
100 kHz
Irms
(A)
6.3 VDC AT + 85 °C, 4 VDC AT + 125 °C, 3.15 VDC AT + 150 °C
68 B TH3B686(1)6R3(2) 4.1 6 1.8 0.22
10 VDC AT + 85 °C, 7 VDC AT + 125 °C, 5 VDC AT + 150 °C
2.2 A TH3A225(1)010(2) 0.5 6 6.3 0.11
4.7 A TH3A475(1)010(2) 0.5 6 5.0 0.12
4.7 B TH3B475(1)010(2) 0.5 6 3.4 0.16
10 A TH3A106(1)010(2) 1.0 6 3.4 0.15
10 B TH3B106(1)010(2) 1.0 6 1.8 0.22
10 C TH3C106(1)010(2) 1.0 6 1.8 0.25
22 B TH3B226(1)010(2) 2.2 6 1.9 0.21
47 D TH3D476(1)010(2) 4.7 6 0.7 0.46
68 C TH3C686(1)010(2) 6.8 6 1.0 0.33
68 D TH3D686(1)010(2) 6.8 6 1.0 0.33
100 D TH3D107(1)010(2) 10 8 0.6 0.50
220 E TH3E227(1)010(2) 22 8 0.5 0.57
16 VDC AT + 85 °C, 10 VDC AT + 125 °C, 8 VDC AT + 150 °C
1.0 A TH3A105(1)016(2) 0.5 4 9.3 0.09
2.2 A TH3A225(1)016(2) 0.5 6 5.9 0.11
3.3 A TH3A335(1)016(2) 0.5 6 5.0 0.12
3.3 B TH3B335(1)016(2) 0.5 6 3.5 0.16
4.7 B TH3B475(1)016(2) 0.8 6 2.9 0.17
6.8 B TH3B685(1)016(2) 1.1 6 1.8 0.22
6.8 C TH3C685(1)016(2) 1.1 6 1.9 0.24
10 C TH3C106(1)016(2) 1.6 6 1.8 0.25
22 B TH3B226(1)016(2) 3.5 6 1.9 0.21
22 C TH3C226(1)016(2) 3.5 6 1.4 0.28
22 D TH3D226(1)016(2) 3.5 6 0.8 0.43
33 D TH3D336(1)016(2) 5.3 6 0.6 0.50
47 C TH3C476(1)016(2) 7.5 6 1.0 0.33
47 D TH3D476(1)016(2) 7.5 6 0.7 0.46
68 D TH3D686(1)016(2) 10.9 6 0.6 0.50
100 E TH3E107(1)016(2) 16.0 8 0.6 0.52
20 VDC AT + 85 °C, 13 VDC AT + 125 °C, 10 VDC AT + 150 °C
1.0 A TH3A105(1)020(2) 0.5 4 8.4 0.09
2.2 A TH3A225(1)020(2) 0.5 6 5.9 0.11
2.2 B TH3B225(1)020(2) 0.5 6 3.5 0.16
4.7 C TH3C475(1)020(2) 0.9 6 2.3 0.22
10 C TH3C106(1)020(2) 2.0 6 1.7 0.25
22 D TH3D226(1)020(2) 4.4 6 0.7 0.46
33 D TH3D336(1)020(2) 6.6 6 0.7 0.46
47 D TH3D476(1)020(2) 9.4 6 0.7 0.46
47 E TH3E476(1)020(2) 9.4 6 0.6 0.52
25 VDC AT + 85 °C, 17 VDC AT + 125 °C, 12.5 VDC AT + 150 °C
1.0 A TH3A105(1)025(2) 0.5 4 7.6 0.11
1.0 B TH3B105(1)025(2) 0.5 4 5.0 0.13
2.2 B TH3B225(1)025(2) 0.6 6 3.8 0.15
3.3 C TH3C335(1)025(2) 0.8 6 2.3 0.22
4.7 C TH3C475(1)025(2) 1.2 6 2.0 0.24
10 B TH3B106(1)025(2) 2.5 6 2.3 0.19
10 C TH3C106(1)025(2) 2.5 6 1.5 0.27
10 D TH3D106(1)025(2) 2.5 6 1.0 0.39
15 C TH3C156(1)025(2) 3.8 6 1.2 0.3
15 D TH3D156(1)025(2) 3.8 6 0.8 0.43
22 D TH3D226(1)025(2) 5.5 6 0.7 0.46
33 D TH3D336(1)025(2) 8.3 6 0.7 0.46
47 D TH3D476(1)025(2) 11.8 6 0.7 0.46
47 E TH3E476(1)025(2) 11.8 6 0.6 0.52
Notes:
• (1) Capacitance Tolerance: K, M
• (2) TerminATion and Packaging: A, B, C, D, E, F
Preliminary values in bold. Contact factory for availability
TH3
Vishay Sprague Solid Tantalum Chip Capacitors
TANTAMOUNT® High Temperature, Molded Case
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40084
66 Revision: 30-Nov-07
Notes:
• (1) Capacitance Tolerance: K, M
• (2) Termination and Packaging: A, B, C, D, E, F
Preliminary values in bold. Contact factory for availability
Notes:
At + 25 °C, the leakage current shall not exceed the value listed
in the Standard Ratings Table.
At + 85 °C, the leakage current shall not exceed 10 times the value
listed in the Standard Ratings Table.
At + 125 °C, the leakage current shall not exceed 12 times the value
listed in the Standard Ratings Table.
At + 150 °C, the leakage current shall not exceed 15 times the value
listed in the Standard Ratings Table.
CAPACITANCE
(µF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(µA)
MAX. DF
AT + 25 °C
(%)
MAX. ESR
AT + 25 °C
100 kHz (Ω)
MAX. RIPPLE
100 kHz
Irms
(A)
35 VDC AT + 85 °C, 23 VDC AT + 125 °C, 17.5 VDC AT + 150 °C
0.33 A TH3A334(1)035(2) 0.5 4 13.0 0.08
1.0 B TH3B105(1)035(2) 0.5 4 5.0 0.13
1.5 C TH3C155(1)035(2) 0.5 6 3.8 0.17
2.2 C TH3C225(1)035(2) 0.8 6 2.9 0.20
3.3 C TH3C335(1)035(2) 1.2 6 2.1 0.23
4.7 C TH3C475(1)035(2) 1.6 6 1.9 0.24
4.7 D TH3D475(1)035(2) 1.6 6 1.3 0.34
6.8 D TH3D685(1)035(2) 2.4 6 1.1 0.37
10 D TH3D106(1)035(2) 3.5 6 0.8 0.43
15 D TH3D156(1)035(2) 5.3 6 0.7 0.46
22 D TH3D226(1)035(2) 7.7 6 0.6 0.50
22 E TH3E226(1)035(2) 7.7 6 0.6 0.52
50 VDC AT + 85 °C, 33 VDC AT + 125 °C, 25 VDC AT + 150 °C
1.0 C TH3C105(1)050(2) 0.5 4 4.6 0.16
4.7 D TH3D475(1)050(2) 2.4 6 1.2 0.37
10 D TH3D106(1)050(2) 5.0 6 0.8 0.43
10 E TH3E106(1)050(2) 5.0 6 0.8 0.45
RATINGS AND PART NUMBER REFERENCE
TYPICAL LEAKAGE CURRENT FACTOR
Leakage Current Factor
Percent of Rated Voltage
100
10
1.0
0.1
0.01
0.001
+ 125 °C
+ 85 °C
+ 55 °C
+ 25 °C
- 55 °C
+ 150 °C
0 °C
0 10 20 30 40 50 60 70 80 90 100
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
