BC66NBTEB-KIT - QUECTEL WIRELESS SOLUTIONS CO., LTD

DOGM GRAPHIC SERIES

132x32 DOTS

4.2011

Zeppelinstrasse 19 · D-82205 Gilching · Phone +49-(0)8105-778090 · Fax: +49-(0)8105-778099 · www.lcd-module.de · info@lcd-module.de

TECHNICAL DATA

*HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15µm DOT GAP

*OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS

*132x32 PIXELS (CORRESPONDS TO 4x22 CHARACTERS OR 2x16 LARGE CHARACTERS)

*ST 7565R CONTROLLER WITH SPI (4-WIRE) INTERFACE

*POWER SUPPLY: SINGLE SUPPLY 2.4..3.3V (TYPICALLY 140µA)

*NO ADDITIONAL VOLTAGES REQUIRED

*OPERATING TEMPERATURE RANGE -20°C TO +70°C (STORAGE -30°C TO +80°C)

*LED BACKLIGHTING 5..45mA

*NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB

ORDERING CODE

GRAPHICS DISPLAY, 132x32, 55x31mm EA DOGM132X-5

x: W = white background (FSTN pos. transflective)

E = yellow/green background (STN pos. transmissive)

B = blue background (STN neg. transmissive)

S = black background (FSTN neg. transmissive)

L = yellow/green background (STN pos. reflective, cannot be backlit)

LED BACKLIGHT, WHITE EA LED55X31-W

LED BACKLIGHT, YELLOW/GREEN EA LED55X31-G

LED BACKLIGHT, BLUE EA LED55X31-B

LED BACKLIGHT, RED EA LED55X31-R

LED BACKLIGHT, AMBER EA LED55X31-A

LED BACKLIGHT, FULL COLOR RGB EA LED55X31-RGB

ACCESSORIES

USB TEST BOARD FOR PC (WINDOWS) EA 9780-2USB

SOCKET CONNECTOR 4.8 mm HEIGHT (2 PCS. ARE REQUIRED) EA FL-20P

FONTEDITOR WITH CHARACTER SETS e.g. 6x8, 8x8, 8x16, CYRILLIC EA USBSTICK-FONT

flexible display

content !

EA DOGM132W-5 +

EA LED55x31-W

EA DOGM132B-5 +

EA LED55x31-W

EA DOGM132W-5 +

EA LED55x31-A

EA DOGM132-5

Page 2

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

EA DOGM132

The EA DOGM132, a 132x32-pixel graphics display, is a new addition to ELECTRONIC ASSEMBLY’s EA DOGM

series. It, too, has pins that allow it to be mounted quickly and easily. 6 different optional LED backlights are available.

These can be combined with 5 different display technologies, making it possible to have up to around 20 different designs.

Designed for compact, handheld devices, this modern LCD series offers a number of benefits with and without backlighting:

* Extremely compact (55x31 mm) with a large viewing area of 51x15 mm

* Super-flat: 2.0 mm without backlight module, and only 5.8 mm with a b./l. module mounted

* Serial SPI interface (4-wire)

* Single supply +2.4 V or +3.3 V

* T ypical power consumption of only 140µA in full operation (white LED backlight from 5mA)

* Easily mounted by soldering

* W ide range of design variants orderable as single units

* Backlighting color changes possible

CONTRAST ADJUSTMENT

The contrast can be set by means of a command for all the displays in the EA DOGM series. The contrast setting of the

display must be set once by the software, and is then kept constant throughout the entire operating temperature range (-

20..+70°C), thanks to the integrated temperature compensation.

LED BACKLIGHT

6 different variants are available for individual backlighting: white, yellow/

green, blue, red, amber and a full-color version.

There are 2 separate LED paths available for each monochrome backlight

that can be switched in parallel or in series to suit the system voltage.

This means that most backlights can be run at either 3.3 V or 5 V.

To operate the backlight, we recommend a current source (e.g.

CAT4238TD) or an external series resistor to limit the current. This can

be calculated from R=U/I; you can find the values in the table on the

right. To prolong the life of the backlights, we recommend that you use a

current source.

The operating life of the yellow/green, red and amber backlights is 100,000

hours. The life of the white and blue backlights is considerably shorter.

W e recommend that you dim these or switch them off whenever possible.

Important: Never connect the backlight LEDs directly to a 5 V/

3.3 V supply as this will immediately destroy the LEDs. Always

use a current source. Please note that derating applies at

temperatures exceeding +25°C.

ASSEMBLING

First, clip the display and backlight modules together by gently pushing

the display pins through the corresponding holes on the backlight module.

Then insert the entire module into the socket, or into the soldering holes

on the pcb. The backlight pins (the 2 rows with 3 pins at the bottom) must

be soldered on the top side as well to ensure good contact between the

modules.

Important: The display has a protective film on the top and/or the

bottom, and there is also one on the backlight. These must be removed.

Make sure that neither display nor backlight will never come into contact with any kind of liquid like Fluxer,

Cleaner, Water.

yellow/green

EA LED55x31-G

Forward

voltage

Current

max.

Limiting resistor

@3,3V @5V

Connected in parallel 2,2 V 80 mA 14 ohm 35 ohm

Connected in series 4,4 V 40 mA -15 ohm

white

EA LED55x31-W

Forward

voltage

Current

max.

Limiting resistor

@3,3V @5V

Connected in parallel 3,2 V 60 mA 1,6 ohm 30 ohm

Connected in series 6,4 V 30 mA - -

blue

EA LED55x31-B

Forward

voltage

Current

max.

Limiting resistor

@3,3V @5V

Connected in parallel 3,2 V 60 mA 1,6 ohm 30 ohm

Connected in series 6,4 V 30 mA - -

amber

EA LED55x31-A

Forward

voltage

Current

max.

Limiting resistor

@3,3V @5V

Connected in parallel 2,4 V 80 mA 11 ohm 32 ohm

Connected in series 4,8 V 40 mA -5 ohm

red

EA LED55x31-R

Forward

voltage

Current

max.

Limiting resistor

@3,3V @5V

Connected in parallel 2,1 V 80 mA 15 ohm 36 ohm

Connected in series 4,2 V 40 mA -20 ohm

Full color

EA LED55x31-RGB

Forward

voltage

Current

max.

Limiting resistor

@3,3 V @5V

Connected in parallel 4V 125 mA -3x24 ohm

EA DOGM132-5

Page 3

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

EA LED55x31-W

White

EA LED55x31-G

Yellow/green

EA LED55x31-B

Blue

EA LED55x31-A

Amber

EA LED55x31-R

Red

EA LED55x31-RGB

Full Color

Display Technology Optional

backlight

Readability

Display color

non

backlighted

Display color

with backlight

Required

backlight

EA DOGM132W

FSTN pos.

transflective

usage is possible

with and without

backlight module

even without

backlight

readable

black on white black on backlight

color

white, blue,

amber, RGB

EA DOGM132E

STN pos.

yellow/green

transmissive

backlight module is

necessary

even without

backlight

readable

dark green on

yellow/green

black on

yellow/green yellow/green

EA DOGM132B

STN neg. blue

transmissive

backlight module is

necessary --- ---

backlight color on

blue~black

background

white,

yellow/green

EA DOGM132S

FSTN neg.

transmissive

backlight module is

necessary --- --- backlight color on

black background

white, amber,

RGB

EA DOGM132L

STN pos.

yellow/green

reflective

no backlight

possible

good at

"normal"

ambient

brightness

dark green on

yellow/green --- ---

5 DIFFERENT TECHNOLOGIES

See below for an overview of available technologies, combinations with available backlights and their usability:

6 AND MORE DIFFERENT BACKLIGHTS

6 and more different backlight colors are available to match equipments design as much as possible. The most effective

and brightest one is the white one EA LED55x31-W .

If you see black and white pictures on this page but you want to see the colors of the displays, you can download a full-

colored version of this document at

http://www.lcd-module.de/eng/pdf/grafik/dogm132-5e.pdf

EA DOGM132-5

Page 4

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

APPLICATION EXAMPLES

LOW VOLTAGE

If an external source of +9..+12V (does not have

to be stabilized) is available, the charge pump is

not needed and less external components are

required. Supply and logic voltage may be

1.8..3.3V

LOW POWER

+3.0V or +3.3V (single supply) operation

requires 8 external capacitors. Current

consumption typ. 110uA

WIDE RANGE

The operation on +2.4..+3.3V (single

supply) requires 9 external capacitors.

Current consumption is typ. 150uA.

EA DOGM132-5

Page 5

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

DATA TRANSFER

Data transfer is unidirectional. That means that data can only be written; it cannot be read again. In contrast to other

displays, a busy query is not necessary with this display. The clock-pulse rate of the SCL line can be up to 20 MHz

@3.3V, depending on the supply voltage. Y ou will find more detailed information on timing on pages 64 and 65 of the

data sheet of the ST7565R controller , which you will find on our website at

http://www.lcd-module.de/eng/pdf/zubehoer/st7565r.pdf

TABLE OF PROGRAMMING COMMANDS

EA DOGM132-5

Page 6

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

*) Make sure that for 6:00 viewing direction ADC has to be set to „reverse“ (mirrored layout) !

INITIALISATION EXAMPLE

Using the internal voltage converter (single supply +2.4V ..+3.3V).

Applications „LOW POWER“ and „WIDE RANGE“

INITIALISATION EXAMPLE

Using an external power supply for contrast (dual power supply).

Application „LOW VOLT AGE“

Orientation for 6 o`clock (Bottom View)

Initialisation example for single supply (bottom view)

Command A0 D7 D6 D5 D4 D3 D2 D1 D0 Hex Remark

(2) Display start line set 001000000$40 Display start line 0

(8) ADC set 010100001$A1 ADC reverse *)

(15) Common output mode select 011000000$C0 Normal COM0~COM31

(9) Display normal/reverse 010100110$A6 Display normal

(11) LCD bias set 010100010$A2 Set bias 1/9 (Duty 1/33)

(16) Power control set 000101111$2F Booster, Regulator and Follower on

(20) Booster ratio set 0

11111000$F8 Set internal Booster to 3x / 4x

00000000$00

(17) V0 voltage regulator set 000100011$23

Contrast set

(18) Electronic volume mode set 0

10000001$81

00011111$1F

(19) Static indicator set 0

10101100$AC No indicator

00000000$00

(1) Display ON/OFF 010101111$AF Display on

Initialisation example for dual power supply (bottom view)

Command A0 D7 D6 D5 D4 D3 D2 D1 D0 Hex Remark

(2) Display start line set 001000000$40 Display start line 0

(8) ADC set 010100001$A1 ADC reverse *)

(15) Common output mode select 011000000$C0 Normal COM0~COM31

(9) Display normal/reverse 010100110$A6 Display normal

(11) LCD bias set 010100010$A2 Set bias 1/9 (Duty 1/33)

(16) Power control set 000101011$2B Booster off, Regulator, Follower on

(17) V0 voltage regulator set 000100011$23

Contrast set

(18) Electronic volume mode set 0

10000001$81

00011111$1F

(19) Static indicator set 0

10101100$AC No indicator

00000000$00

(1) Display ON/OFF 010101111$AF Display on

EA DOGM132-5

Page 7

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

12:00 VIEWING ANGLE, TOP VIEW OPTION

If the display is read mostly from above (on the front of a laboratory power

supply unit, for example), the preferred angle of viewing can be set to 12

o’clock. This rotaties the display by 180°. A slightly different initialization setup

is required for this. Also keep in mind that the leftmost column (normally

numbered as 0) will now change to 4.

USB-TEST BOARD EA 9780-2USB

For easy startup, a USB test board is available that can be connected to a PC. A USB cable and W indows software

is supplied with the product. This allows text and images (*.bmp) to be displayed directly on the connected display .

You will find more information on the test board in the EA 9780-

2USB data sheet.

SIMULATION WITH WINDOWS

A simulator window also displays the contents of the display . The

software can simulate all the displays and colors even without the

hardware. You can download the software free from our website:

http://www.lcd-module.de/deu/disk/startdog.zip

Initialisation example top view

Command A0 D7 D6 D5 D4 D3 D2 D1 D0 Hex Remark

(8) ADC set 010100000$A0 ADC normal

(15) Common output mode

select 011001000$C8 Reverse COM31~COM0

Orientation for 12 o`clock (Top View)

CHARACTER SET AND FONT EDITOR (ACCESSORY)

With the ordering code EA USBSTICK-FONT a memory stick comes with various character sets, especially made

for this small display EA DOGM132-5. An import function allows additionally to use Windows fonts. With the FontEditor

it is easy to generate for example Cyrillic, Greek and Arabic

fonts.

The preview function shows immediately the size and style in

simulation window .

When the testboard EA 9780-2USB is connected to the USB

port, you can see the character (or any predefined text) live

on the display !

No need to say that the export function generates a C- and

Basic source code as an include file to your software.

Included is also a software that is called BitmapEdit. With

that it becomes easy to convert standard *.bmp files into the

EA DOGM132-5 format.

EA DOGM132-5

Page 8

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical errors reserved.

Zeppelinstrasse 19 · D-82205 Gilching · Phone +49-(0)8105-778090 · Fax: +49-(0)8105-778099 · www.lcd-module.de · info@lcd-module.de

DIMENSIONS EA DOGM132

Note:

The 4 LED pins A1/A2 and

C1/C2 also have to be

soldered from above to ensure

good contact.

Note:

- LC displays are generally not suited for wave or reflow

soldering. Temperatures of over 80°C can cause

lasting damage.

- The surfaces of the displays and backlights are

protected from scratching by self-adhesive protective

foils. Please remove these before mounting.

- Make sure that either display nor backlight will never

come into contact with any kind of liquid like Fluxer,

Cleaner, Water.

DIMENSIONS EA LED55X31

ATTENTION

handling precautions!

all dimensions are in mm

ATTENTION

handling precautions!

Pin Symbol Level Function Pin Symbol Level Function

1 NC (A1+: LED backlight) 21 V0 - LC Drive

2 NC (C1-: LED backlight) 22 V1 - LC Drive

3 23 V2 - LC Drive

4 24 V3 - LC Drive

5 25 V4 - LC Drive

6 26 VSS L Power Supply 0V (GND)

7 27 CAP2N - Voltage Converter

8 28 CAP2P - Voltage Converter

9 29 CAP1P - Voltage Converter

10 30 CAP1N - Voltage Converter

11 31 CAP3P - Voltage Converter

12 32 VOUT - Voltage Output +9..12V

13 33 VSS L Power Supply 0V (GND)

14 34 VDD2 H Power Supply Booster

15 35 VDD H Power Supply +1,8..3,3V

16 36 SI H / L Serial Data In

17 37 SCL H / L Serial Clock

18 38 A0 H / L L= Command, H= Data

19 NC (C2-: LED backlight) 39 RST L Reset (active low)

20 NC (A2+: LED backlight) 40 CS1B L Chip Select (active low)