Datasheet for part number MS3102E366SW Our Catalog Part Number: MS3102E366SW Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet Thread Shell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Insulator Rotation Contact Rating at +20 C (68 F) (Size 160/4) Contact Rating at +20 C (68 F) (Size 500/0) Contact Resistance (Size 160/4) Contact Resistance (Size 500/0) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 160/4) Sep. Force per Contact (Size 500/0) Gage Coupling Torque Contact Retention (Size 160/4) Contact Retention (Size 500/0) Shell Material Shell Plating Insulator and Gromet Material Contact Material Connector with threaded coupling Box mounting receptacle Socket 36 36-6 4 contacts size 4, 2 contacts size 0 Solder Cup Hard silver yes no 35 135 A 245 A 0,5 m 0,2 m In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 M 1600 Vrms 1,1 mm Standard insulator material -55/+125C (-67/257F) IP65 acc. to DIN 40 050 500 hours salt spray resistant 500 min 4,0 N 8,5 N For infos on Gage please see catalog VG95234, part 1 Closing: 23 Nm max / Opening: 1,03 Nm min 90 N 95 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 160/4) Wire Stripping (Size 500/0) General Info 11,8 mm 13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1