AApppplliiccaattiioonn
For energy management systems and
instrumentation equipment.
FFrreeqquueennccyy
50-400 Hz.
IInnssuullaattiioonn lleevveell
0.6 kV, 10 kV BIL full wave.
CCoonnssttrruuccttiioonn
The core and windings are encased in U.L.
approved plastic.
CCoonnttiinniioouuss TThheerrmmaall CCuurrrreenntt RRaattiinngg FFaaccttoorr
1.33 at 30°C amb.,
1.0 at 50°C amb.
• Flexible leads are UL 1015 105°C,
CSA approved, #18 AWG, 36" long
• Approximate Weight: 0.4 lbs.
WINDOW SIZE 0.75” X 0.75”
These transformers are designed for assembly to an existing electrical installation
without the need for dismantling the primary bus or cables.
PRODUCT PROFILE
CURRENT TRANSFORMER
MODEL 1411-614
Split Core / Clamp On
REGULATORY AGENCY APPROVALS
Manufactured to meet the requirements of
ANSI/IEEE C57.13.
Classified by U.L. in accordance with IEC 44-1
SPECIFICATIONS
Publication 1411-P012A-EN-P – August 2005 Copyright ©2005 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
CAUTION :
Proper safety precautions must be followed during
installation by a trained electrician. Never install while
bus is energized.
The current transformer must have its secondary
terminals short circuited or the burden connected, before
energizing the primary circuit.
