www.vishay.com
60
TNPW
Vishay Dale
Document Number 31006
Revision 15-Jul-04
For Technical Questions, contact: ff2bresistors@vishay.com
FEATURES
• Metal film layer on high quality ceramic
• Protective top coat
• Solder contacts on Ni barrier layer
(2010/2512 size = 100% Sn on Ni barrier
• Excellent stability at different environmental conditions
• Low TC and tight tolerances
Thin Film, Rectangular, Resistor Chips
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SIZE POWER RATING LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE E-SERIES
P70°C (W) VOLTAGE COEFFICIENT RANGE
CECC
INCH METRIC 40401-801 EIA 575 V
MAX. ppm/°C% Ω
TNPW0402 0402 1005 0.063 0.062 25 25 0.5 100R-10K 24-96
100 0.5 10R-91R 24
100 0.5 11K-100K 24-96
TNPW0603 0603 1608 0.1 0.062 75 25 0.1 100R-330K 24-96
25 0.5 10R-91R
TNPW0805 0805 2012 0.125 0.1 100 15 0.1 100R-252K 24-192
25, 50 0.1, 0.5 49R9-252K 24-192
25, 50 0.5 10R-49R8
TNPW1206 1206 3216 0.25 0.125 100 15 0.1 100R-1M 24-192
25, 50 0.1, 0.5 49R9-1M 24-192
50 0.5 22R1-49R8
TNPW1210 1210 3225 0.33* 0.25 100 25, 50 0.1, 0.5 49R9-1M 24-192
50 0.5 22R1-49R8
TNPW2010 2010 5025 0.4 150 50 0.5 22R1-49R8 24-96
25 0.1 49R9-362K 24-96
TNPW2512 2512 6332 0.5 200 50 0.5 22R1-49R8 24-96
25 0.1 49R9-700K 24-96
TNPW0805 1002 B T9 RT1
MODEL RESISTANCE VALUE TOLERANCE TC PACKAGING
ΩB = ± 0.1% T1 = ± 100 ppm/°C RT1 Papertape 5000 pcs
Ex: 1501 = 1.5k C = 0.25% T2 = ± 50 ppm°C
10R0 = 10ΩD = 0.5% T9 = ± 25 ppm/°C
3303 = 330k F = 1.0% T10 = ± 15 ppm/°C
T13 = ± 10 ppm/°C
ORDERING INFORMATION
TECHNICAL SPECIFICATIONS
PARAMETER UNIT TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 TNPW2010 TNPW2512
Rated Dissipation at 70°C W 0.063 0.062 0.1 0.062 0.125 0.1 0.25 0.125 0.33 0.25 0.4 0.5
(CECC 40401 | EIA 575)
Limiting Element Voltage
2)
V 25 75 100 100 100 150 200
Thermal Resistance
1)
K/W ≤ 870
1)
≤ 550
1)
≤ 440
1)
≤ 220
1)
≤ 140
1)
≤ 90
1)
≤ 70
1)
Insulation Resistance Ω> 10
9
Category Temperature Range
°C - 55 / + 125 (+ 155)
Failure Rate h
–1
0.3 •10
–9
Weight / 1000pcs g
1)Measuring conditions in acc. with CECC 40401 2) Rated voltage: Px R
*Size not specified in CECC • Extended values available on request.
• Power rating depends on the max. Temperature at the solder point, • Looser tolerance or TC available
the component placement density and the substrate material • Marking : 3 digits or 4 digits, 0402 no marking
0.65 2 5.5 10 16 28 39
www.vishay.com
61
TNPW
Vishay Dale
Document Number 31006
Revision 15-Jul-04
For Technical Questions, contact: ff2bresistors@vishay.com
Thin Film, Rectangular, Resistor Chips
SIZE DIMENSIONS millimeters
inch metric L W H T1 T2
0402 1005 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.2 ± 0.1
0603 1608 1.6 ± 0.2 0.81 ± 0.2 0.4 ± 0.1 0.3 ± 0.2
0805 2012 2.0 ± 0.2 1.24 ± 0.2 0.4 ± 0. 1 0.4 ± 0.25
1206 3216 3.2 ± 0.15 1.6 ± 0.15 0.61 ± 0.15 0.5 ± 0.25
1210 3225 3.2 ± 0.15 2.49 ± 0.15 0.61 ± 0.15 0.46 ± 0.2
2010 5.0 ± 0.15 2.5 ± 0.15 0.61 ± 0.15 0.6 ± 0.25
2512 6.3 ± 0.20 3.1 ± 0.15 0.61 ± 0.15 0.6 ± 0.25
DIMENSIONS
PACKAGING
MODEL REEL
PACKAGING CODE
TAPE WIDTH DIAMETER PIECES / REEL
PAPER2) BLISTER
TNPW0402 8mm Papertape 180mm / 7" 10000 RT7
TNPW0603 8mm Paper 180mm / 7" 5000 RT1
292mm / 11.5" 10000 RT5
TNPW0805 8mm 180mm / 7" 1000 R52 R75
TNPW1206 Paper/Blistertape1) 180mm / 7" 5000 RT1 RG1
292mm / 11.5" 10000 RT5 RT4
TNPW1210 8mm 180mm / 7" 5000 RT1
Paper 292mm / 11.5" 10000 RT5
TNPW2010 12mm Blistertape 180mm/7” 4000 R02
TNPW2512 12mm Blistertape 180mm/7” 2000 R67
4000 R82
1) only in combination with 180mm/7" and 330mm/13" plastic reel
2) plastic reel
• further information about packaging: see appropriate catalog or web page
Derating
120
100
80
60
40
20
0
- 55 -25 0 25 50 75 100 125 150 175
Ambient Temperature in °C
Rated Power In %
70
Temperature Rise
90
80
70
60
50
40
30
20
10
00 0.1 0.2 0.3 0.4 0.5
Power in W
Temperature Rise In °C
0402 1206
08050603
EIA
CECC
SOLDER PAD DIMENSIONS millimeters
SIZE REFLOW SOLDERING WAVE SOLDERING
inch metric a b l a b l
0402 1005 0.4 0.6 0.5
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.3 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
1210 3225 0.9 2.5 2.0 1.1 2.5 2.3
2010 1.0 2.5 3.9 1.2 2.5 3.9
2512 1.0 3.2 5.2 1.2 3.2 5.2
2010
2512
www.vishay.com
62
TNPW
Vishay Dale
Document Number 31006
Revision 15-Jul-04
For Technical Questions, contact: ff2bresistors@vishay.com
Thin Film Rectangular Chip Resistors
TNPW0603
60
40
20
0
-20
-40
-60
-80 1 5 10 50 100 500 1000
1KΩ
4.75KΩ
10KΩ
HF Performance
Phase Angle in ϑϑ
ϑϑ
ϑ˚
TNPW0805
1KΩ
HF Performance
Phase Angle in ϑϑ
ϑϑ
ϑ˚
10Ω
100Ω
10Ω
100Ω
Frequency f in MHz
60
40
20
0
-20
-40
-60
-80 1 5 10 50 100 500 1000
Frequency f in MHz
10KΩ
120
110
100
90
80
70
60 10 100 1K 10K 100K
Non-Linearity
Non-Linearity A
3
in dB
Resistance Value in Ω
TNPW0603
TNPW1206
TNPW0805
3K
1K
100
10
Test Voltage in V
10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
1.2 / 50µs EN140000 4.27
Resistance Value in Ω
TNPW0603
TNPW0603
60
40
20
0
-20
-40
-60
-80
10Ω
100Ω
1KΩ
4.75KΩ
10KΩ
HF Performance
[Z]-RO in %
RO
1 5 10 50 100 500 1000
Frequency f in MHz
TNPW0805
60
40
20
0
-20
-40
-60
-80
10Ω
100Ω
1KΩ
10KΩ
[Z]-RO in %
RO
1 5 10 50 100 500 1000
HF Performance Frequency f in MHz
3
2
1
100 1K 10K 100K 1M
Current Noise
Current Noise in µV/V
Resistance Value in Ω
TNPW0402
TNPW0805
0.5
0.3
0.1
0.01
0.03
0.05
TNPW0805
3K
1K
100
10
Test Voltage in V
10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
10 / 700µs EN140000 4.27
Resistance Value in Ω
TNPW0603
TNPW0402
TNPW0805 TNPW0603
TNPW1206
www.vishay.com
63
TNPW
Vishay Dale
Document Number 31006
Revision 15-Jul-04
For Technical Questions, contact: ff2bresistors@vishay.com
APPLICABLE SPECIFICATIONS
• CECC40000 / 40400 / 40401-801
• EN140400 / IEC 60115 – 1
• EIA 575
TNPW0805
100
10
1
0.1
0.01
Power Rating P in W
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
TNPW0603
Pulse Rating P > 0
Secondary conditions:
a) P 0 (peak pulse, single pulse)
b) ϑu ≤ 70°C
c) Ûmax see diagram (Max pulse voltage)
TNPW0805
500
300
400
200
100
0
Pulse Voltage Û
max
in V
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
TNPW0603
Maximum Pulse Voltage
Secondary conditions:
a) P see diagram (Pulse Rating)
b) ϑu ≤ 70°C
TNPW0805
100
10
1
0.1
0.01
Power Rating P in W
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
TNPW0603
Pulse Rating P ≤ P70
Secondary conditions:
a) P ≤ P70 (permissible constant power at ϑu = 70°C)
b) ϑu ≤ 70°C
c) Ûmax see diagram (Max. pulse voltage)
Thin Film, Rectangular, Resistor Chips
PERFORMANCE
TEST CONDITIONS OF TEST TEST RESULTS
0402 0603 TO 2512
TOLERANCES %
0.5 0.1 / 0.25 0.5, 1.0%
< 100R
≥
100R
Endurance Test at 70°C 1000 hours at 70°C, 1.5 hours “ON”, 0.5 hours “OFF” ≤ ± 3% ≤ ± 0.1% ≤ ± 0.05% ≤ ± 0.25%
IEC 60115-1 4.25.1
Endurance at UCT 1000 hours at 125 °C without load ≤ ± 3% ≤ ± 0.1% ≤ ± 0.05% ≤ ± 0.5%
IEC 60115-1 4.25.3
Overload Test Short time overload for 2 seconds ≤ ± 2% ≤ ± 0.05% ≤ ± 0.02% ≤ ± 0.1%
IEC 60115-1 4.13 2.5 x rated voltage or ≤ 2 x limiting element voltage
Thermal Shock Rapid change between upper and lower ≤ ± 1% ≤ ± 0.05% ≤ ± 0.02% ≤ ± 0.1%
IEC 60115-1 4.19, IEC 60068-2-14 category temperature
Damp Heat Steady State 56 days at 40°C and 93% relative humidity ≤ ± 3% ≤ ± 0.1% ≤ ± 0.05% ≤ ± 0.5%
IEC 60115-1 4.24, IEC 60068-2-3
Resistance to Soldering Heat 10 seconds at 260°C solder bath temperature ≤ ± 2% ≤ ± 0.05% ≤ ± 0.02% ≤ ± 0.1%
IEC 60115-1 4.18, IEC 60068-2-20
