VS-MBRB1635PbF, VS-MBRB1645PbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 16 A FEATURES Base cathode 2 D2PAK * * * * 150 C TJ operation High frequency operation Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * AEC-Q101 qualified 3 Anode 1 N/C PRODUCT SUMMARY Package TO-263AB (D2PAK) IF(AV) 16 A VR 35 V, 45 V * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VF at IF 0.63 IRM 40 mA at 125 C TJ max. 150 C Diode variation Single die EAS 24 mJ DESCRIPTION This VS-MBRB16... Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM IFSM tp = 5 s sine VF 16 Apk, TJ = 125 C TJ VALUES UNITS 16 A 35/45 V 1800 A 0.57 V -65 to +150 C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-MBRB1635PbF VS-MBRB1645PbF UNITS 35 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL IF(AV) TEST CONDITIONS TC = 134 C, rated VR 5 s sine or 3 s rect. pulse Non-repetitive peak surge current IFSM VALUES UNITS 16 Following any rated load condition and with rated VRRM applied 1800 Surge applied at rated load condition half wave single phase 60 Hz 150 A Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 3.6 A, L = 3.7 mH 24 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 3.6 A Revision: 18-Oct-16 Document Number: 94304 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MBRB1635PbF, VS-MBRB1645PbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM (1) Maximum instantaneous reverse current IRM (1) Maximum junction capacitance CT Typical series inductance LS Maximum voltage rate of change dV/dt TEST CONDITIONS 16 A TJ = 25 C 0.63 TJ = 125 C 0.57 Rated DC voltage TJ = 125 C VALUES TJ = 25 C VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C Measured lead from top of terminal to mounting plane Rated VR 0.2 40 1400 UNITS V mA pF 8.0 nH 10 000 V/s VALUES UNITS Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction temperature range TJ -65 to +150 Maximum storage temperature range TStg -65 to +175 Maximum thermal resistance, junction to case RthJC DC operation 1.50 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 C/W Approximate weight Mounting torque Marking device C 2 g 0.07 oz. minimum 6 (5) maximum 12 (10) kgf * cm (lbf * in) Case style D2PAK MBRB1635 Revision: 18-Oct-16 Document Number: 94304 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MBRB1635PbF, VS-MBRB1645PbF www.vishay.com Vishay Semiconductors 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 100 10 TJ = 150 C TJ = 125 C TJ = 25 C TJ = 150 C 10 TJ = 125 C 1.0 TJ = 100 C TJ = 75 C 0.1 TJ = 50 C 0.01 TJ = 25 C 0.001 0.0001 1 0 0.2 0.4 0.6 0.8 1.0 0 1.2 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 C 1000 100 0 10 20 30 40 50 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 t1 0.01 0.001 0.00001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.0001 0.001 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 18-Oct-16 Document Number: 94304 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MBRB1635PbF, VS-MBRB1645PbF www.vishay.com Vishay Semiconductors 15 RMS limit 150 Average Power Loss (W) Allowable Case Temperature (C) 155 145 DC 140 135 130 Square wave (D = 0.50) Rated VR applied 125 10 DC D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 5 See note (1) 0 120 0 5 10 15 20 0 25 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 10 000 At any rated load condition and with rated VRRM applied following surge 1000 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = rated VR applied Revision: 18-Oct-16 Document Number: 94304 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MBRB1635PbF, VS-MBRB1645PbF www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MBR 1 2 B 16 45 3 4 5 TRL PbF 6 1 - Vishay Semiconductors product 2 - Essential part number 3 - B = surface mount 4 - Current rating (16 = 16 A) 5 - Voltage code = VRRM 6 - 7 35 = 35 V 45 = 45 V None = tube (50 pieces) TRL = tape and reel (left oriented) TRR = tape and reel (right oriented) 7 - PbF = lead (Pb)-free ORDERING INFORMATION PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-MBRB1635PbF 50 1000 Antistatic plastic tubes VS-MBRB1635TRRPbF 800 800 13" diameter reel VS-MBRB1635TRLPbF 800 800 13" diameter reel VS-MBRB1645PbF 50 1000 Antistatic plastic tubes VS-MBRB1645TRRPbF 800 800 13" diameter reel VS-MBRB1645TRLPbF 800 800 13" diameter reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95046 Part marking information www.vishay.com/doc?95054 Packaging information www.vishay.com/doc?95032 SPICE model www.vishay.com/doc?95407 Revision: 18-Oct-16 Document Number: 94304 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D2PAK DIMENSIONS in millimeters and inches Conforms to JEDEC(R) outline D2 PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb 0.004 M B 0.010 M A M B Plating Base Metal (4) b1, b3 H 2x e Gauge plane c1 (4) (c) B 0 to 8 Seating plane L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail "A" Rotated 90 CW Scale: 8:1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 e 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch (7) Outline conforms to JEDEC(R) outline TO-263AB Revision: 08-Jul-15 Document Number: 95046 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-MBRB1635PBF VS-MBRB1645PBF