RV www.vishay.com CECC ( Vishay Sfernice ) 40401-010 Qualified Thin Film Chip Resistors FEATURES DESIGN SUPPORT TOOLS click logo to get started Models Available Utilizing proven expertise in Thin Film resistors, VISHAY provides a CECC qualified chip with the same reliability and stability found in QPL resistors. These chips are available in a wide range of sizes, values and performance characteristics. CONSTRUCTION Passivation Passivated NiCr resistance film Solder coating Nickel barrier * Nickel barrier for high temperature operating conditions Available * Tight TCR < 10 ppm/C, and in lot tracking < 5 ppm/C in (-55 C, +155 C temperature range) Available * Very low noise < 35 dB and voltage coefficient 0.1 ppm/V * Non-inductive * Laser trimmed down to 0.1 % * Wraparound resistance less than 0.01 * Antistatic waffle-pack or tape and reel packaging available * High stability (0.05 % - 1000 h at Pn at +70 C) * Withstand moisture resistance test of AEC-Q200 * Conform to EN 140401 804 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details High purity alumina substrate Adhesion layer STANDARD ELECTRICAL SPECIFICATIONS 0505 RESISTANCE RANGE (1) (2) 100 to 260K RATED POWER Pn W 0.125 LIMITING ELEMENT VOLTAGE (UL) V 50 0.1, 0.5, 1, 2, 5 TEMPERATURE COEFFICIENT ppm/C 10, 25 0603 100 to 260K 0.125 50 0.1, 0.5, 1, 2, 5 10, 25 RV 0805 100 to 300K 0.200 50 0.1, 0.5, 1, 2, 5 10, 25 RV 1206 100 to 1M 0.330 75 0.1, 0.5, 1, 2, 5 10, 25 MODEL SIZE RV RV TOLERANCE % Notes (1) Extended resistance range on request (2) For ohmic range versus tolerance and TCR, see detailed table CLIMATIC SPECIFICATIONS Operating temperature range Storage temperature range OHMIC RANGE VS. TOLERANCE AND TCR -55 C to +155 C -55 C to +155 C MECHANICAL SPECIFICATIONS Resistive material Substrate material Plating Marking resistance to solvents Nichrome Alumina Tin lead over nickel or tin silver over nickel or gold over nickel Per CECC Specs CASE SIZE 0505 0505 0603 0603 0805 0805 1206 1206 OHMIC RANGE 100 < 500 500 to 260K 100 < 500 500 to 260K 100 < 500 500 to 300K 100 < 500 500 to 1M TOLERANCE % 0.5; 1; 2; 5 0.1; 0.5; 1; 2; 5 0.5; 1; 2; 5 0.1; 0.5; 1; 2; 5 0.5; 1; 2; 5 0.1; 0.5; 1; 2; 5 0.5; 1; 2; 5 0.1; 0.5; 1; 2; 5 TCR ppm/C 10, 25 10, 25 10, 25 10, 25 10, 25 10, 25 10, 25 10, 25 TECHNICAL SPECIFICATIONS TEST Absolute TCR Absolute tolerance Voltage coefficient Noise Thermal EMF Load life stability Note (3) Rn: Nominal resistance Revision: 23-Feb-18 SPECIFICATIONS E: 25 ppm/C / Y: 10 ppm/C 0.1 %, 0.5 %, 1 %, 2 %, 5 % (R 500 ) 0.5 %, 1 %, 2 %, 5 % (R 100 ) 0.1 ppm/V -35 dB typical < 0.1 V/C (0.1 % Rn (3) 0.05 ) CONDITIONS -55 C to +155 C 1000 h Pn at +70 C Document Number: 60022 1 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RV www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A D D B C E E SERIES/ CASE SIZES A B D/E C Min. Max. Min. Max. Min. Max. Min. Max. RV 0505 1.198 (0.047) 1.502 (0.059) 1.143 (0.045) 1.397 (0.055) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 0603 1.368 (0.054) 1.672 (0.066) 0.623 (0.025) 0.877 (0.035) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 0805 1.758 (0.069) 2.062 (0.081) 1.143 (0.045) 1.397 (0.055) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 1206 2.908 (0.114) 3.212 (0.126) 1.473 (0.058) 1.727 (0.068) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) POPULAR OPTION AEC-Q200 moisture resistance Option to order: 0058: Specific production process to withstand 85 C/85 % RH at Pn/10 ENVIRONMENTAL TEST TEST VALUES AND DRIFTS (R/R %) CONDITIONS CECC REQUIREMENTS TYPICAL PERFORMANCE 6.25 x rated power / 2 s (or 2 UL) 0.05 % Rn (2) + 0.05 0.01 % Rn (2) Climatic sequences (1) -55 C / +155 C 5 moisture cycles 0.1 % Rn (2) + 0.05 0.02 % Rn (2) Thermal shock (1) -55 C / +155 C 5 cycles 30 min 0.05 % Rn (2) + 0.05 0.02 % Rn (2) +70 C/Pn 1000 h 0.1 % Rn (2) + 0.05 0.05 % Rn (2) Overload Load life (1) +260 C/ 10 s 0.05 % Rn (2) + 0.05 0.02 % Rn (2) +40 C / 93 % HR Pn / 10 0.1 % Rn (2) + 0.05 0.01 % Rn (2) AEC-Q200 (3) 85 C / 85 % RH / Pn / 10 1000 h 0.5 % + 0.05 Max. < 0.3 % + 0.05 Resistance to solder heat Moisture resistance (1) High temperature storage Bending (1) 1000 h at + 155 C 0.1 % Rn (2) + 0.05 0.05 % Rn (2) 10 bends / 2 mm / 5 s 0.05 % Rn (2) + 0.05 0.02 % Rn (2) SPECIFIC CONDITIONS DUE TO TERMINATION TYPE TEST Solderability High T reflow profile CONDITIONS VALUES AND DRIFTS B; G N +235 C/2 s Sn60Pb40 alloy +245 C/3 s Sn97Ag3 alloy N/A +255 C/40 s (on parts) VISHAY REQUIREMENTS TYPICAL PERFORMANCE VISUAL INSPECTION 0.02 % Rn (2) + 0.05 0.01 % Rn (2) + 0.05 Notes (1) Test requiring parts to be mounted on PCB will be performed with the requirement that termination alloy will be the same as solder paste alloy. Gold termination will be tested as B termination (2) Rn: Nominal Resistance Pn: Nominal Power (3) Option to order: 0058 Revision: 23-Feb-18 Document Number: 60022 2 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RV www.vishay.com Vishay Sfernice DERATING CURVE Rated Power (%) PACKAGING INFORMATION NUMBER OF PIECES PER PACKAGE SIZE TAPE AND REEL WAFFLE PACK (2" x 2") Min. TAPE WIDTH Max. 0505 4000 100 80 60 100 0603 5000 100 0805 100 1206 140 40 8 mm (0.315") 20 4000 0 0 20 40 60 70 80 100 120 140 155 125 Ambient Temperature in C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RV0505E1001DBT0099 R V GLOBAL MODEL 0 5 0 5 E 1 0 0 1 D B T 0 0 9 9 SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION 0505 0603 0805 1206 E = 25 ppm/C Y = 10 ppm/C The first 3 digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point B = 0.1 % D = 0.5 % F=1% G=2% J=5% B: SnPb over nickel barrier N: SnAg over nickel barrier G: gold over nickel barrier For more information see "Codification of packaging" table Leave blank if no option B: lead bearing version N and G: lead (Pb)-free / RoHS version 10R0 = 10 3901 = 3900 1004 = 1 M Historical Part Number example: RV 0505 25PPM 1K 0.5 % B TR R1016 PART NUMBER DESCRIPTION (for information only) RV 0505 25 PPM 1K 0.5 % B TR R1016 MODEL SIZE TCR OHMIC VALUE TOLERANCE TERMINATION PACKAGING OPTION Revision: 23-Feb-18 Document Number: 60022 3 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RV www.vishay.com Vishay Sfernice CODIFICATION OF PACKAGING CODE 18 PACKAGING WAFFLE PACK W 100 min., 1 mult WA 100 min., 100 mult (available only in size 1206) PLASTIC TAPE (Standard for all sizes.) T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500min., 2500 mult TF Full tape (quantity depending on size of chips) PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes.) PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500min., 2500 mult PF Full tape (quantity depending on size of chips) Revision: 23-Feb-18 Document Number: 60022 4 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000