Control Gear Contents 3 Pole Contactors.......................................................................... 2-2 4 Pole Contactors.......................................................................... 2-20 Mini Contactors.............................................................................. 2-37 Manual Motor Starters .................................................................. 2-42 Field Bus Plugs.............................................................................. 2-49 Softstarters.................................................................................... 2-54 Pilot Devices.................................................................................. 2-58 Switching Power Supplies (CP Range) .......................................... 2-72 Return to main index ABB LIMITED 2/1 A.., AF.., 3-pole Contactors a.c. Circuit Switching A9 A12 A16 A26 A30 A40 Switching of 3-phase Cage Motors AC-3 utilization category When making, the motor current is about 6 x I n. Breaking while the motor is running at I n motor F.L.C. AC-3 Power rating < 55 C, 400 V kW 4 5.5 7.5 11 15 18.5 AC-3 Rated operational current < 55 C, 400 V < 55 C, 415 V < 55 C, 690 V A A A 9 9 7 12 12 9 17 17 10 26 26 17 32 32 21 37 37 25 Rated operational current < 40 C < 55 C < 70 C A A A 25 22 18 27 25 20 30 27 23 45 40 32 55 55 39 60 60 42 2.5 4 4 6 10 16 Switching of Resistive Circuits AC-1 utilization category AC-1 When making, the switched-on current is equal to the I n load rated current with cos 0.95. l With conductor cross-sectional area l Rated operational voltage a.c. Control circuit supply Selection & Ordering a.c. Control circuit supply & Select contactor coil voltage on cover folding page 0/1, according to control circuit supply. (Please quote coil voltage in plain text). Contactor Main Accessories d.c. (Electronic coil interface) d.c. Control circuit supply Types Types CA 5-.., 1-pole CAL 5-.., 2-pole Types Timers TP.., Pneumatic TE.., Electronic Types Select accessory type and quote required data in plain text. 690 A9-30-10 A12-30-10 A16-30-10 A26-30-10 A30-30-10 A40-30-10 - - - Types Auxiliary contacts Selection & Ordering 2 V 3-pole contactors Select contactor type. mm - - - AE9-30-00 AE12-30-00 AE16-30-00 AE26-30-00 AE30-30-00 AE40-30-00 CA 5-10 CA 5-01 1-pole, front mounting 1 x N.O. 1-pole, front m 1 x N.C. TP 40 DA, TP 180 DA Direct timing - Front mounting TP 40 I TE5S Direct timing - Indep Supply voltages: 24 V a.c./d.c., 110 ... 120; 220 ... 240; 380 ... 440 V a.c. Interlocks VE 5-., Mechanical / Electrical Types VM..., Mechanical VE 5-1 VM 5-1 mounting between 2 contactors Surge suppressors Protection of 3-phase motors RV.., (Varistor) a.c./d.c. RC.., (Capacitor) a.c. RV 5 RC 5-1 Types TA 25 DU... O/L relays Selection & Ordering Select O/L relay type and setting range according to motor F.L.C. TA..DU.., Thermal O/L relay E..DU.., Electronic O/L relay Standard starting time 2 ... 10 s tripping class 10 A Types & setting range in Amps 0.10...0.16 0.16...0.25 0.25...0.40 0.40...0.63 0.63...1.0 1.0...1.4 1.3...1.8 1.7...2.4 2.2...3.1 2.8...4.0 TA 42 DU... 3.5...5.0 4.5...6.5 6.0...8.5 7.5...11 10...14 13...19 18...25 24...32 22...32 29...42 Please consult us for electronic solution Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/2 A50 A63 A75 A95 A110 A145 A185 A210 A260 A300 AF400 AF460 AF580 AF750 22 30 37 45 55 75 90 110 140 160 200 250 315 400 50 50 35 65 65 43 75 75 46 96 96 65 110 110 82 145 145 120 185 185 170 210 210 210 260 260 220 305 300 280 400 400 350 460 460 400 580 580 500 750 750 650 100 85 70 115 95 80 125 105 85 145 135 115 160 145 130 250 230 180 275 250 180 350 300 240 400 350 290 500 400 325 600 500 400 700 600 480 800 700 580 1050 800 720 35 50 50 50 70 120 150 185 240 300 2 x 185 2 x 240 2 x 240 2 x 80 x 5 bar / mm 1000 690 A50-30-00 A95-30-00 A63-30-00 A75-30-00 A145-30-11 A110-30-00 A185-30-11 AF50-30-00 AF63-30-00 AF75-30-00 AF95-30-00 AF110-30-00 AF145-30-11 AF185-30-11 CAL 5-11 A210-30-11 - TE5S AF400-30-11 AF 460-30-11 AF 580-30-11 AF 750-30-11 CAL 5-11 B 2-pole, side mounting 1 x N.O. + 1 x N.C. Inverse timing - Front mounting ng AF210-30-11 AF260-30-11 AF300-30-11 CAL 5-11 2-pole, side mounting 1 x N.O. + 1 x N.C. A A260-30-11 A300-30-11 (1st block) 1 x N.O. + 1 x N.C. (2nd block) - TE5S Independent mounting Direct timing - Independent mounting VE 5-2 - - VM 300H - VM 750H RV 5 RC 5-2 - RC 5-2 The built-in coil interface eliminates the need of extra surge suppressors on these sizes TA 75 DU... TA 80 DU... 29...42 36...52 45...63 60...80 60...80 TA 200 DU... 130...175 150...200 TA 450 DU... Please consult us for thermal solution 165...235 220...310 TA 110 DU... 65...90 80...110 E 200 DU E 320 DU E 500 DU E 800 DU 60...200 100...320 150...500 250...800 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/ A 9 ... A 110 3-pole Contactors a.c. Operated Application A 9 ... A 110 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. / 1000 V a.c. or 220 V d.c. / 440 V d.c. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. Description The A... series 3-pole contactors are of the block type design. * Main poles and auxiliary contact blocks A 9 ... A 40 1-stack contactors: - 3 main poles, - 1 built-in auxiliary contact, - front and side mounted add-on auxiliary contact blocks. A 50 ... A 110 contactors: - 3 main poles, - front and side mounted add-on auxiliary contact blocks. * Control circuit: a.c. operated with laminated magnet circuit * Accessories: a wide range of accessories is available Variants * * * * * 4-pole: A 9 ... A 75 contactors (with 4 N.O. or 2 N.O. + 2 N.C. main poles). a.c./d.c. operated controlled supply: AF 50 ... AF 110 contactors. d.c. operated: AE 9 ... AE 40 contactors. d.c. operated with large coil voltage range: TAE 50 ... TAE 110 contactors (on application). contactors for capacitor switching (UA..., UA..-R types), Connecting point for control leads in top part of main terminals of A 50 ... A 110 contactors. Location of surge suppressors. Clear marking of coil voltages and frequencies. Terminal marking according to IEC 60947-4-1, EN 50005, EN 50012 and NEMA standards. Quick fixing on mounting rail according to IEC 715, EN 50022 and EN 50023 standards: - 35 x 7.5 mm for A 9 ... A 40 contactors, - 35 x 15 mm for A 9 ... A 75 contactors, - 75 x 25 mm for A 50 ... A 110 contactors. Location of function marker. Stops for attaching front-mounted accessories. Location of side-mounted accessories (on right or left hand side) . Terminal screws: - A 9 ... A 16 contactors: M3.5 Pozidriv (+,-) No.2 for all terminals, Holes for screw fixing (screws not supplied). Distance between holes according to EN 50003 (contactors for motors 11 kW). - A 26 contactors: M4 Pozidriv (+,-) No.2 for main and auxiliary terminals, M3.5 Pozidriv (+,-) No.2 for coil terminals, - A 30, A 40 contactors: M5 Pozidriv (+,-) No.2 for main terminals, M3.5 Pozidriv (+,-) No.2 for auxiliary and coil terminals, Terminals delivered in open position with captive screws. Screwdriver guidance for all terminals. Degree of protection (IP...) of terminals according to IEC 60947-1: - A 9 ... A 40 contactors: IP 20 for main and auxiliary terminals. - A 50 ... A 110 contactors: IP 10 for main terminals, IP 20 for auxiliary terminals. - A 50 ... A 75 contactors: M6 Pozidriv (+,-) No.2 for main terminals, M3.5 Pozidriv (+,-) No.2 for coil terminals, - A 95 ... A 110 contactors: M8 Hexagon socket (s = 4 mm) for main terminals, M3.5 Pozidriv (+,-) No.2 for coil terminals. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/4 A 9 ... A 110 3-pole Contactors a.c. Operated Rated operational current Auxiliary contacts Weight fitted kg Footprint H W D Order Code 1st stack AC-3 400 V A AC-1 40 C A KW 9 25 4 1 - 1 0.34 0.34 74 44 74 A9.30.10 A9.30.01 12 27 5.5 1 - 1 0.34 0.34 74 44 74 A12.30.10 A12.30.01 17 30 7.5 1 - 1 0.34 0.34 74 44 74 A16.30.10 A16.30.01 26 45 11 1 - 1 0.60 0.60 90 54 94 A26.30.10 A26.30.01 32 55 15 1 - 1 0.71 0.71 90 54 108 A30.30.10 A30.30.01 37 60 18.5 1 - 1 0.71 0.71 90 54 108 A40.30.10 A40.30.01 50 100 22 1 1 1.20 110 82 108 A50.30.11 65 115 37 1 1 1.20 110 82 108 A63.30.11 75 125 40 1 1 1.20 110 82 108 A75.30.11 96 145 45 1 1 2.04 148 102 124 A95.30.11 110 160 55 1 1 2.04 148 102 124 A110.30.11 state coil voltage A9-30-10 A26-30-10 A50-30-11 (see table below) Coil voltages Voltage V - 50Hz 24 48 110 220 ... 230 230 ... 240 380 ... 400 400 ... 415 A95-30-11 Voltage V - 60Hz 24 48 110 ... 120 230 ... 240 240 ... 260 400 ... 415 415 ... 440 Other voltages on application Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/5 A 9 ... A 110 3-pole Contactors Main Accessories Auxiliary Contact Blocks Mounting on contactors Positioning Contacts Weight kg Order code A 9 ... A 110 Front face 1 - - 1 0.014 0.014 CA 5-10 CA 5-01 A 9 ... A 40 Front face 3 2 1 2 0.060 0.060 CA 5-31 M CA 5-22 M A 9 ... A 110 Side 1 1 0.050 CAL 5-11 Pneumatic Timers CAL 5-11 CA 5-10 Mounting on contactors A 9 ... A 75 Timing range Contacts Weight kg Order code Direct 0.1 ... 40 s Direct 10 ... 180 s Inverse 0.1 ... 40 s Inverse 10 ... 180 s 1 1 1 1 0.070 0.070 0.070 0.070 TP 40 DA TP 180 DA TP 40 IA TP 180 IA 1 1 1 1 Electronic Timers for star-delta starters (dwelling time 50 ms) Mounting Timing range Supply voltage V Weight kg Order code Independent Direct 0.8 ... 8 s or 6 ... 60 s 24 a.c. / d.c. 110 ... 120 a.c. 220 ... 240 a.c. 380 ... 440 a.c. 0.080 0.080 0.080 0.080 TE5S-24 TE5S-120 TE5S-240 TE5S-440 Contacts Weight kg Order code A 9 ... A 40 Mech. / electrical A 50 ... A 110 - - 2 2 0.076 0.146 VE 5-1 VE 5-2 A 9 ... A 40 - - 0.066 VM 5-1 TP 40 DA Interlocks Mounting on contactors TE5S-240 Feature Mechanical Note: Use type VE 5-2 for mechanical and electrical interlocking between A 40 and A 50 contactors. Surge Suppressors VE 5-1 RV 5/50 RC 5-1/50 Mounting on contactors Feature Voltage range Weight kg Order code A 9 ... A 110 Varistor 24 ... 50 V a.c./d.c. 50 ... 133 V a.c./d.c. 110 ... 250 V a.c./d.c. 250 ... 440 V a.c./d.c. 0.015 0.015 0.015 0.015 RV 5/50 RV 5/133 RV 5/250 RV 5/440 A 9 ... A 40 RC 24 ... 50 V a.c. 50 ... 133 V a.c. 110 ... 250 V a.c. 250 ... 440 V a.c. 0.012 0.012 0.012 0.012 RC 5-1/50 RC 5-1/133 RC 5-1/250 RC 5-1/440 A 50 ... A 110 RC 24 ... 50 V a.c. 50 ... 133 V a.c. 110 ... 250 V a.c. 250 ... 440 V a.c. 0.015 0.015 0.015 0.015 RC 5-2/50 RC 5-2/133 RC 5-2/250 RC 5-2/440 Other Accessories A wide range of accessories are available: - various auxiliary contact blocks for specific controls and use, - interface relays, - connecting auxiliaries: strips, connectors, additional pieces, etc. - impulse contact blocks, lamp holder and fuse holder blocks, - function marker. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/6 A 9 ... A 110 3-pole Contactors Thermal O/L Relays Thermal O/L Relays, Class 10A For contactors: TA 25 DU A 9 ... A 30 TA 42 DU A 30 ... A 40 TA 75 DU A 50 ... A 75 A 95 ... A 110 Setting range Weight kg 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.170 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.360 0.360 0.360 0.360 0.750 0.750 0.10 ... 0.16 0.16 ... 0.25 0.25 ... 0.40 0.40 ... 0.63 0.63 ... 1.00 1.0 ... 1.4 1.3 ... 1.8 1.7 ... 2.4 2.2 ... 3.1 2.8 ... 4.0 3.5 ... 5.0 4.5 ... 6.5 6.0 ... 8.5 7.5 ... 11 10 ... 14 13 ... 19 18 ... 25 24 ... 32 18 ... 25 22 ... 32 29 ... 42 18 ... 25 22 ... 32 29 ... 42 36 ... 52 45 ... 63 60 ... 80 29 ... 42 36 ... 52 45 ... 63 60 ... 80 65 ... 90 80 ... 110 Order code TA 25 DU 0.16 TA 25 DU 0.25 TA 25 DU 0.4 TA 25 DU 0.63 TA 25 DU 1.0 TA 25 DU 1.4 TA 25 DU 1.8 TA 25 DU 2.4 TA 25 DU 3.1 TA 25 DU 4.0 TA 25 DU 5.0 TA 25 DU 6.5 TA 25 DU 8.5 TA 25 DU 11 TA 25 DU 14 TA 25 DU 19 TA 25 DU 25 TA 25 DU 32 TA 42 DU 25 TA 42 DU 32 TA 42 DU 42 TA 75 DU 25 TA 75 DU 32 TA 75 DU 42 TA 75 DU 52 TA 75 DU 63 TA 75 DU 80 TA 80 DU 42 TA 80 DU 52 TA 80 DU 63 TA 80 DU 80 TA 110 DU 90 TA 110 DU 110 TA 80 DU Separate Mounting Kit For O/L relays: Weight kg 0.050 0.075 0.170 0.230 TA 25 DU 25 TA 25 DU 32 TA 42 DU, TA 75 DU, TA 80 DU TA 110 DU Order code DB 25/25 A DB 25/32 A DB 80 DB 200 TA 110 DU Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/7 A 145 ... AF 750 3-pole Contactors a.c. Operated - A 145 ... A 300 Contactors a.c. / d.c. Operated - AF 400 ... AF 750 Contactors Application A 145 ... AF 750 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. or 220 V d.c. / 600 V d.c. The contactors can also be used for many other applications such as isolation, bypass, capacitor switching, lighting... Description The A 145 ... AF 750 3-pole contactors are of the block type design. * Main poles and auxiliary contact blocks - 3 main poles, - 1 N.O. and 1 N.C. auxiliary contact block (fitted on the left side) . A maximum of 4 auxiliary contact blocks can be fitted on each contactor. * Control circuit: A 145 ... A 300 contactors: a.c. operated with laminated magnet circuit, AF 400 ... AF 750 contactors: a.c. operated, large voltage range, with electronic coil interface, with laminated magnet circuit. Contactors AF 400 ... AF 750 are fitted as standard with an electronic coil interface which accepts a wide control voltage range for a.c. 50/60 Hz supply or d.c. supply. * Accessories: a wide range of accessories is available. Variants * next pages in this section a.c./d.c. operated, large voltage range, with electronic coil interface: AF 145 ... AF 300 contactors. Main terminals. Screws and nut insert holders are included. Screw fixing, top and bottom. (Screws supplied). Terminal shrouds for protection can easily be fitted from the front. Location of surge suppressors on A 145 ... A 300 contactors. (built-in on AF 400 ... AF 750 contactors). Quick release quarter turn screws for easy access to contact inspection. A145 ... A300 contactors main terminals in line with Isomax circuit breakers. Terminal markings according to IEC 60947-4-1, EN 50005, EN 50012 and NEMA standards. Easy access to the coil terminals. Clear marking of coil voltages and frequencies. Location of side-mounted mechanical interlock (on right or left hand side). Front access to the coil, no need to remove power cables when changing coil. CAL 5-11 side mounted auxiliary contact block. Easy access to the terminals. On-Off position indicator. Location of function marker. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/8 A 145 ... AF 750 3-pole Contactors a.c. Operated - A 145 ... A 300 Contactors a.c. / d.c. Operated - AF 400 ... AF 750 Contactors A 145-30-11 Rated operational current AC-3 AC-1 400 V 40 C A A Auxiliary contacts fitted Footprint 145 250 1 1 196 112 160 3.500 A 145-30-11 185 275 1 1 196 112 160 3.500 A 185-30-11 210 350 1 1 227 140 181 6.100 A 210-30-11 260 400 1 1 227 140 181 6.100 A 260-30-11 305 500 1 1 227 140 181 6.100 A 300-30-11 400 600 1 1 278 186 216 12.00 AF 400-30-11 460 700 1 1 278 186 216 12.00 AF 460-30-11 580 800 1 1 283 210 242 15.00 AF 580-30-11 750 1050 1 1 283 210 242 15.00 AF 750-30-11 H W Weight kg D Order code state coil voltage (see table below) A 300-30-11 Coil voltages Voltage V - 50Hz Voltage V - 60Hz 24 48 110 220 ... 230 230 ... 240 380 ... 400 400 ... 415 24 48 110 ... 120 230 ... 240 240 ... 260 400 ... 415 415 ... 440 Other voltages on application Coil voltages: AF 400 ...AF 750 AF 460-30-11 Voltage V - 50/60Hz Voltage V d.c. 48 ... 130 100 ... 250 24 ... 60 48 ... 130 100 ... 250 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. AF... contactors with electronic coil interface: electromagnetic compatibility and A or B environment definitions + page ???? AF 750-30-11 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/9 A 145 ... AF 750 3-pole Contactors Main accessories Auxiliary Contact Blocks Mounting on contactors Positioning Contacts Weight kg Order Code A 145 to AF 750 Side 1 1 0.050 0.050 CAL 5-11 CAL 5-11B 1 1 Electronic Timers for star-delta starters (dwelling time 50 ms) - (Prohibited with AF... contactors) CAL 5-11 Mounting Timing rangeSupply voltage V Weight kg Order Code Independent Direct 0.8 ... 8 s or 6 ... 60 s 0.080 0.080 0.080 0.080 TE5S-24 TE5S-120 TE5S-240 TE5S-440 Weight kg Order Code 0.150 0.150 0.200 VM 300H VM 300/460H VM 750H Voltage range Weight kg Order Code 24 ... 50 V a.c. 50 ... 133 V a.c. 110 ... 250 V a.c. 250 ... 440 V a.c. 0.015 0.015 0.015 0.015 RC 5-2/50 RC 5-2/133 RC 5-2/250 RC 5-2/440 { 24 a.c. / d.c. 110 ... 120 a.c. 220 ... 240 a.c. 380 ... 440 a.c. Interlocks for two horizontal mounted contactors TE5S-240 Left contactor Right contactor Feature A 95 ... 300 A 145 ... 300 A 210 ... 300 AF 400 ... 460 AF 400 ... 750 AF 400 ... 460 Mechanical Mechanical Mechanical Surge Suppressors VM 300H Mounting on contactors Feature A 145 ... 300 RC Note: The built-in coil interface eliminates the need of extra surge suppressors on the AF 400 to AF 750 contactors. RC... Shrouds LT...-AC (terminal protection acc. to VDE 0106, part 100) (pack of 2) Mounting on contactors Suitable for contactor with Weight kg 1 piece Order Code A 145, A 185 A 145, A 185 A 210 ... A 300 A 210 ... A 300 AF 400, AF 460 AF 400, AF 460 AF 580, AF 750 AF 580, AF 750 Cable connectors Cable lugs Cable connectors Cable lugs Cable connectors Cable lugs Cable connectors Cable lugs 0.100 0.100 0.100 0.100 0.150 0.800 0.150 0.850 LT 185-AC LT 185-AL LT 300-AC LT 300-AL LT 460-AC LT 460-AL LT 750-AC LT 750-AL Other Accessories LT...-AL A wide range of accessories are available: - LZ... connectors, - LW... enlargement pieces for terminals, - connecting auxiliaries: shorting bars, connection bars, additional pieces, etc. - shrouds for shorting bars, - interlocks for two vertical contactors, - adapter plates. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/10 A 145 ... AF 750 3-pole Contactors Thermal & Electronic O/L Relays Thermal O/L Relays, Class 10A For contactors: A 145, A 185 TA 200 DU A 210 ... A 300 AF400...AF750 Setting range A Weight kg Order code 66 ... 90 80 ... 110 100 ... 135 110 ... 150 130 ... 175 150 ... 200 130 ... 185 165 ... 235 220 ... 310 Please consult us for thermal 0.750 0.750 0.750 0.750 0.750 0.750 1.500 1.500 1.500 solution TA 200 DU 90 TA 200 DU 110 TA 200 DU 135 TA 200 DU 150 TA 200 DU 175 TA 200 DU 200 TA 450 DU 185 TA 450 DU 235 TA 450 DU 310 Electronic O/L Relays, Adjustable Class 10, 20 and 30 TA 450 DU For contactors: Setting range A Weight kg Order code A 145, A 185 A 210 ... A 300 AF 400, AF 460 AF 580, AF 750 60 ... 200 100 ... 320 150 ... 500 250 ... 800 1.120 1.260 1.210 4.240 E 200 DU E 320 DU E 500 DU E 800 DU For contactors: For O/L relays: Weight kg Order code A 145, A 185 A 210 ... A 300 AF 400, AF 460 AF 580, AF 750 TA 450 DU/SU 0.500 0.750 0.720 1.400 DT 450/A 185 DT 450/A 300 DT 500/AF 460 S DT 800/AF 750 S For O/L relay: Weight kg Order code TA 200 DU 0.230 DB 200 Fitting Weight kg Order code Load side Between TA 200 DU and A 145, A 185 0.070 0.050 LT 200/A LT 185-AY For electronic O/L relay Weight kg Order code E 200 DU E 320 DU E 500 DU E 800 DU 0.120 0.120 0.240 0.240 LT 200 E LT 320 E LT 500 E LT 800 E Kit for Mounting on the Contactors E 320 DU E 500 DU E 800 DU Separate Mounting Kit Terminal Shrouds for TA 200 DU Thermal O/L Relay E 800 DU Terminal Shrouds for Electronic O/L Relay A 185 contactor with E 200 DU electronic O/L relay and LT 200 E terminal shroud Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/11 AF 50 ... AF 750 3-pole Contactors a.c. / d.c. Operated - Large Voltage Range Electronic Coil Interface Application AF 50 ... AF 750 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. or 220 V d.c. / 600 V d.c. The contactors can also be used for many other applications such as bypass, capacitor switching, lighting, d.c. power circuits... The AF... contactors are fitted with an electronic coil interface which accepts a wide control voltage range, on a.c. 50/60 Hz or d.c. supplies. The same contactor can accept various supply voltages according to different countries where the final machine will be used or some fluctuation in the control voltage due to the local supply or network. The AF... contactors are also fully suitable for operation in a.c. or d.c. control circuit liable to voltage interruptions or voltage dip risks. Description The AF 50 ... AF 750 3-pole contactors are of the block type design. * Main poles and auxiliary contact blocks - 3 main poles, AF50 ... AF110 front and side mounted add on auxiliary contact blocks - AF145 ... AF750 1 N.O. and 1 N.C. auxiliary contact block (fitted on the left side). A maximum of 4 auxiliary contact blocks can be fitted on each contactor. * Electronic control: The contactors are fitted with an electronic interface that very precisely controls the voltage to the coil. The electronic control circuit always works using d.c. current through the coil and in a.c. operation the current is rectified before being applied to the coil. To achieve the levels of the currents required for making and holding respectively, the voltage is pulsed across the coil with the aid of a transistor. The pulsing also implies that the current in the coil can be optimally regulated all the time relatively independently of the voltage level. The function is controlled by a specific integrated circuit developed by ABB. * Advantages - Wide voltage range, e.g. 100 ... 250 V a.c. and d.c., - Can manage large voltage variations, - Reduced power consumption, - Very distinct closing and opening, - Noise free, - Can withstand voltage interruptions or voltage dips in the control supply (< 20 ms). * Control inputs The large sizes AF 400 ... AF 750 are as standard equipped with low voltage inputs for control, for example by a PLC (+ see drawing below). * Accessories: a wide range of accessories is available. Operating diagram Control inputs (AF 400 ... AF 750) Control circuit with electronic coil interface. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/12 AF 50 ... AF 750 3-pole Contactors a.c. / d.c. Operated - Large Voltage Range Electronic Coil Interface Rated operational current Auxiliary contacts fitted H Footprint W D Weight kg AC-3 AC-1 400 V 40 C A A 50 65 75 96 110 145 185 210 260 305 400 460 580 750 AF 50-30-11 100 115 125 145 160 250 275 350 400 500 600 700 800 1050 Order Code state coil voltage 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 110 110 110 148 148 196 196 227 227 227 278 278 283 283 82 82 82 102 102 112 112 140 140 140 186 186 210 210 108 108 108 124 124 160 160 181 181 181 216 216 242 242 1.220 1.220 1.220 2.070 2.070 3.600 3.600 6.200 6.200 6.200 12.00 12.00 15.00 15.00 AF 50-30-11 AF 63-30-11 AF 75-30-11 AF 95-30-11 AF 110-30-11 AF 145-30-11 AF 185-30-11 AF 210-30-11 AF 260-30-11 AF 300-30-11 AF 400-30-11 AF 460-30-11 AF 580-30-11 AF 750-30-11 AF 95-30-11 Coil voltages: AF 50 ... AF 300 Voltage Voltage V - 50/60Hz V d.c. - 20 ... 60 48 ... 130 48 ... 130 100 ... 250 100 ... 250 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. Coil voltages: AF 400 ... AF 750 Voltage Voltage V - 50Hz V d.c - 24 ... 60 48 ... 130 48 ... 130 100 ... 250 100 ... 250 AF 460-30-11 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. Electromagnetic compatibility: AF... contactors comply with international standards IEC 60947-1 (2000-10-Ed.3.1), 60947-4-1 (2000-11Ed.2) and European standards EN 60947-1, 60947-4-1. Notice: This product has been designed for environment A. Use of this product in environment B may cause unwanted electromagnetic disturbances in which case the user may be required to take adequate mitigation measures. Definitions: Environment A: "Mainly relates to low-voltage non public or industrial networks/locations/installations (+ EN 50082-2 article 4) including highly disturbing sources". Environment B: "Mainly relates to low-voltage public networks (+ EN 50082-1 article 5) such as residential, commercial and light industrial locations/installations. Highly disturbing sources such as arc welders are not covered by this environment". AF 750-30-11 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/13 AE 3-pole Contactors d.c. Operated with Double - Winding coil Application AE9 ... AE 40 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. or 220 V d.c. / 440 V d.c. Description The AE... series 3-pole contactors are d.c. operated contactors. * Main poles and auxiliary contact blocks - 3 main poles, - front and side mounted add-on auxiliary contact blocks. auxiliary contacts for safety circuits page x/xx * Control circuit: laminated magnet circuit and double-winding coil fed from d.c. supply via an insertion contact mounted on the device - AE9 ... AE40: built-in lagging contact for insertion of the second winding * Accessories: a wide range of accessories are available AE... contactors specific design * AE 9 ... AE 40: Built-in lagging contact for insertion of the "holding" winding Coil voltages: AE... * Addition of RT 5 or RV 5 surge suppressor, if required. Please order separately * RV 5 surge suppressor fitted as standard (RT 5 type on request). Voltage - U c V d.c. 12 24 42 48 50 60 75 110 125 220 240 250 Rated operational current Auxiliary contacts fitted H Footprint W D AC-3 AC-1 400 V 40 C A A 9 25 12 16 Order Code state coil voltage - - 74 44 74 AE 9-30-00 27 - - 74 44 74 AE 12-30-00 30 - - 74 44 74 AE 16-30-00 26 45 - - 90 54 94 AE 26-30-00 32 55 - - 90 54 108 AE 30-30-00 37 60 - - 90 54 108 AE 40-30-00 For d.c. operation with solid magnetic circuit please consult us. For accessories see main accessories A9 - A110 page x/xx Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/14 Connection Sets Connections for Reversing Contactors Application Connections between the main poles of two 3-pole contactors mounted side by side so that they operate as reversing contactors. BEM... connections Description The sets are made up of three upstream connections and three downstream connections. BEM 16-30 - Insulated, solid, rigid copper wires BEM 26-30, BEM 40-30 - Insulated, stranded, rigid copper wires BEM 75-30 ... BEM 750-30 - Insulated, solid copper bars BSM 16-30, BSM 25-30 BC and BSM 30-30 BC - Insulated, solid, rigid copper wires On the A... contactors, the power supply by bars or cables equipped with lugs is directly connected to the terminal pads of the main poles. For flange connectors (+ page ????), LX... terminal extension pieces should be used (+ page ????). BEM 75-30 BEM 300-30 Mounting on 3-pole contactors Weight kg 1 set Order code A 9 ... A 16 A 26 A 30, A 40 A 50 ... A 75 A 95, A 110 A145, A 185 A 210 ... A 300 AF 400, AF 460 AF 580, AF 750 BC 9, BC 16 BC 25 BC 30 0.025 0.056 0.096 0.243 0.450 0.900 1.100 4.400 7.300 0.015 0.020 0.025 BEM 16-30 BEM 26-30 BEM 40-30 BEM 75-30 BEM 110-30 BEM 185-30 BEM 300-30 BEM 460-30 BEM 750-30 BSM 16-30 BSM 25-30 BC BSM 30-30 BC Note:The connections provided for the A... contactors can be used for the AF, AE and TAE types. The connections provided for the BC... contactors can be used for the TBC types. 3-pole Connections Phase to Phase BES... for 3-pole connections Application Connections between the main poles of two 3-pole contactors horizontal mounted. Description This set is made up of three downstream or upstream connections. Mounting on 3-pole contactors A 50 ... A 75 A 95, A 110 A 145, A 185 A 210 ... A 300 AF 400, AF 460 AF 580, AF 750 BES... Weight kg 1 set 0.130 0.250 0.500 1.000 2.200 3.700 Order code BES 75-30 BES 110 BES 185 BES 300 BES 460 BES 750 Note: The connections provided for the A... contactors can be used for the AF, AE and TAE types. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/15 BED... Connection Sets Connections for Star-Delta Starters Application Connections between the main poles of a star-delta starter. Description These sets are made up of: - Three line contactor / delta contactor connections - Upstream side. - Three connections for star and delta contactors mounting joined side by side - Downstream side. - The necessary elements to create the star point upstream of the star contactor. BED 40 BED 16, BED 26 BED 40 BED 50, BED 75 BED 95 ... BED 750 - Insulated, solid copper wires. - Insulated, stranded solid copper wires. - Solid copper bars and insulated stranded copper wires. - Insulated, solid copper bars. BED kits are designed to accomodate mechanical interlock For contactors Line and Delta A9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110 A 145 A 185 A 210 A 260, A 300 AF 400 / AF 460 AF 460 AF 580 AF 750 BED 75-1 BED 110 Star A9 A9 A 12 A 16 A 26 A 26 A 30 A 40 A 50 A 75 A 95 A 110 A 145 A 185 A 210, A 260 A 260 / A 300 AF 400 AF 460 / AF 400 AF 580 Weight kg Order code 0.040 BED 16 0.045 BED 26 0.070 BED 40 0.180 BED 50 0.180 0.400 0.500 1.300 1.100 1.500 2.100 3.500 4.700 6.300 7.700 BED 75 BED 95 BED 110 BED 145 A BED 185 BED 210 BED 300 BED 400 BED 460 BED 580 BED 750 Note: The connections provided for A... contactors can be used for the AF, AE, and TAE types. BED 185 BED 400 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/16 Star-Delta Starting of Three-Phase Asynchronous Motors Controlgear Selection Guide Ambient temperature = 55 C. Please consult us for type 1&2 coordinates combinations Motor power, kW Max. starting time from cold (3) Contactors 220240 V 230 V 380400 V 415 V 500 V 660690 V seconds KM1 Main KM3 Delta KM2 Star 4 5.5 9 12.5 15 18.5 25 30 37 45 55 75 90 110 140 160 180 250 315 400 7.5 11 15 22 25 37 45 55 63 75 90 132 160 200 220 250 355 450 560 670 7.5 11 15 22 25 37 45 55 70 75 100 132 160 200 250 250 355 475 600 670 A9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110 A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 A9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110 A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 A9 A9 A 12 A 16 A 26 A 26 A 30 A 40 A 50 A 75 A 95 A 110 A 145 A 185 A 210 A 260 A 260 A 300 AF 400 AF 460 4 5.5 11 12.5 15 22 25 33 40 45 59 75 90 110 140 160 200 250 315 400 5.5 7.5 15 22 25 37 45 63 75 90 110 160 200 250 295 355 450 560 700 750 5.5 7.5 11 15 18.5 37 45 59 63 90 132 160 250 315 355 450 560 670 750 900 15 15 15 15 15 30 30 30 30 20 20 20 20 20 20 20 20 20 20 20 (1) The setting current value is: nominal motor current x 0.58. (2) Contactor Relay type N + TP timer can be used as the AF contactors have a slight delay in closing. (3) Usual time value = 6 ... 10 s. Power circuit diagram A 9 ... AF 750 Contactors O/L Relay (1) Timer Set of power connections TA 25 DU TA 25 DU TA 25 DU TA 25 DU TA 25 DU TA 42 DU TA 75 DU TA 75 DU TA 75 DU TA 110 DU TA 110 DU TA 200 DU TA 200 DU TA 450 DU TA 450 DU TA 450 DU E 500 DU E 500 DU E 800 DU E 800 DU TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S TE5S (2) (2) (2) (2) BED 16 BED 16 BED 16 BED 26 BED 40 BED 40 BED 50 BED 50 BED 75 BED 95 BED 110 BED 145 BED 185 BED 210 BED 300 BED 300 BED 400 BED 400 BED 580 BED 580 (4) (4) (4) (4) (4) (4) (4) (4) (4) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (4) Version without space for mechanical interlock. (5) Version with space for mechanical interlock. Control circuit diagrams - Remote control A 9 ... A 300 Contactors AF 400 ... AF 750 Contactors Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/17 Star-Delta Starting of Three-Phase Asynchronous Motors General When starting, the motor has to overcome the load torque and inertia of the driven machine. During this phase, current must remain within the limits acceptable by the mains. Inertia, load torque and mains are commonly fixed data. Although the type of starting reduces the inrush current as required, it also reduces the torque supplied by the motor. The result is a starting time that varies according to the starting process used. Star-delta starting Technical Data When starting: - inrush current is reduced to a third of direct starting current, - motor torque is reduced to a third or even less of direct starting torque. Transient currents are commonly read during star-delta switching. Utilization During the initial starting phase ("star" connection), the resistive torque of the driven machine must remain, irrespective of speed, less than the "star" motor torque until "star-delta" switching occurs. This starting mode is therefore ideal for machines with no-load starting: - machine-tools, - centrifugal compressors, - wood working machines, etc. In order to prevent a high current peak, at least 80 - 85 % of nominal speed must be reached before switching from star to delta. Precautions Motor nominal voltage in delta connection must be equal to that of the mains. Example: A motor for 400 V star-delta starting must be designed for 400 V in "delta" connection. Its usual designation is "400 V / 690 V motor". The motor must be constructed with 6 terminal windings. Sequence Starting is a three-stage process: 1st stage - "Star" connection Press the "On" button on the control circuit to close the KM2 "star" contactor. The KM1 "line" contactor then closes and the motor starts. Countdown of programmed starting time (normally 6 to 10 s) then begins. 2nd stage - "Star" to "Delta" switching When the programmed starting time is over, the KM2 "star" contactor opens. 3rd stage - "Delta" connection A transition time (or dwelling time) of 50 ms is fixed between opening of the "star" contactor and closing of the "delta" contactor by the use of TE5S timer. This prevents short circuit between "star" and "delta". Note: When AF... contactor types are used as delta and star contactors or an A... contactor as star contactor with an AF... contactor as delta contactor, the use of a timer including a dwelling time (or transition time) e.g. TE5S or similar is not necessary. A timer set for the starting duration in star connection is enough. An electrical interlock between star and delta is mandatory such as VE 5 or through auxiliary contacts. Furthermore, in open transition, the current interruption may reach up to 95 ms: it shall be checked that this duration is compatible with the application i.e. mainly if the decreasing in rotation speed is acceptable during the starting phase. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/18 Connection Bars for Contactor and MCCB Connection Bars for Contactor and Switch fuse Application Connections between contactors/starters and moulded case circuit breakers or switch fuses. Description These connection sets are solid copper bars either isolated or protected by shrouds. Connection bars between contactor and MCCB Vertical assembly Contactors MCCB A 300-30 contactor + MCCB on top A 145, A 185 A 145, A 185 A 210 A 210 ... A 300 AF 400, AF 460 AF 400 ... AF 750 T3 S 3, S 4 S4 S5 S5 S6 Weight kg 0.150 0.150 0.160 0.200 0.250 0.410 Order code BEA 185/T3 BEA 185/S3/S4 BEA 210/S4 BEA 300/S5 BEA 400/S5 BEA 750/S6 Vertical assembly with control wire terminals (Also suitable when using busbar kits for starter combinations) A 145, A 185 T3 0.175 BEA 185 D/T3 A 145 ... A 185 S 3, S 4 0.200 BEA 185D/S3/S4 A 210 S4 0.270 BEA 210D/S4 A 210 ... A 300 S5 0.320 BEA 300D/S5 AF 400, AF 460 S5 0.480 BEA 400D/S5 AF 400 ... AF 750 S6 0.720 BEA 750D/S6 BEA 300/S5 Horizontal assembly A 145, A 185 A 210 A 210, A 300 AF 400, AF 460 AF 400, AF 460 AF 580, AF 750 BEA...D/S (Also suitable when using busbar kits for starter combinations) S 3, S 4 S4 S5 S5 S6 S6 0.520 0.620 1.280 1.310 2.450 4.010 BEA 185H/S4 BEA 210H/S4 BEA 300H/S5 BEA 400H/S5 BEA 460H/S6 BEA 750H/S6 Note: The BEA... connection bars provided for the A 145 ... A 300 contactors can be used for the AF 145 ... AF 300 contactors. Connection bars between contactor and switch fuse Vertical assembly Contactors Switch fuse A 185 A210 ... A 300 OESA 250 OESA 250 to OESA 400 OESA 400 OESA 630 to OESA 800 AF 400 ... AF 460 AF 460 ... AF 750 BEA 300H/S5 Horizontal assembly A 145 A 145, A 185 A 210 ... A 300 BEF 300/OESA400 AF 400, AF 460 Weight kg 1 piece 0.260 0.330 0.340 0.740 OS 160..LR OESA 250..LR 0.170 0.550 OESA 250..LR to OESA 400..LR OESA 400..LR Order code BEF 185/OESA250 BEF 300/OESA400 BEF 460/OESA400 BEF 750/OESA800 OSZA 15 BEF 185H/OESA250 BEF 300H/OESA400 1.250 BEF 460H/OESA400 Note: The BEF... connection bars provided for the A 145 ... A 300 contactors can be used for the AF 145 ... AF 300 contactors. BEF 300H/OESA400 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/19 A.., AF.., 4-pole Contactors a.c. Circuit Switching Switching of Resistive Circuits AC-1 utilization category When making, the switched-on current is equal to the I n load rated current with cos 0.95. AC-1 4-pole contactors Rated operational current A A A mm2 < 40 C < 55 C < 70 C With conductor cross-sectional area Rated operational voltage A9 A 16 A 26 25 22 18 30 27 23 45 40 32 2.5 4 6 V 690 4 N.O. main poles Selection & Ordering A 9-40-00 a.c. Control circuit supply Types d.c. Control circuit supply Types A 26-40-00 A 16-40-00 Select 4 N.O. or 2 N.O. + 2 N.C. main poles Select contactor type. -- -- Select contactor coil voltage on cover folding page 0/1, according to control circuit supply. (Please quote coil voltage in plain text). 2 N.O. + 2 N.C. main poles a.c. Contactor Main Accessories Selection & Ordering A 9-22-00 Control circuit supply Auxiliary contacts CA 5-.., 1-pole CAL ..-.., 2-pole Types Timers TP.., Pneumatic TE.., Electronic Types Select accessory type and quote required data in plain text. A 16-22-00 Types CA 5-10 1-pole, front mounting 1 x N.O. A 26-22-00 CA 5-01 1-pole, front mo 1 x N.C. TP 40 DA, TP 180 DA Direct timing - Front m TE5S Direct timing - Indep Supply voltages: 24 V a.c./d.c., 110 ... 120; 220 ... 240; 380 ... 440 V a.c. Interlocks VE 5-., Mechanical / Electrical VM..., VH... Mechanical Types VE 5-1 VM 5-1 Types RV 5 RC 5-1 mounting between 2 contactors Surge suppressors RV.., (Varistor) a.c./d.c. RC.., (Capacitor) a.c. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/20 A 45 A 50 A 75 EK110 EK150 EK175 EK210 EK370 EK550 EK1000 70 60 50 100 85 70 125 105 85 200 180 155 250 230 200 300 270 215 350 310 250 550 470 400 800 650 575 1000 800 720 25 35 50 95 150 185 240 2 x 185 2 x 240 2 x 300 690 1000 A 45-40-00 EK110-40-11 690 EK175-40-11 A 50-40-00 A 75-40-00 AF45-40-00 EK150-40-11 EK110-40- 21 EK210-40-11 EK 175-40-21 AF50-40-00 AF75-40-00 EK150-40-21 EK210-40-21 -- -- EK370-40-11 EK550-40-11 EK1000-40-11 EK370-40-21 EK 550-40-21 EK1000-40-21 A 45-22-00 -- -- A 75-22-00 CAL 5-11 CAL 16-11 2-pole, side mounting 1 x N.O. + 1 x N.C. 0 IA, TP 180 IA 2-pole, side mounting 1 x N.O. + 1 x N.C. Inverse timing - Front mounting ng - TE5S VE 5-2 - RV 5 RC 5-2 Direct timing - Independent mounting (interpose an N.. contactor relay for EK 370 ... EK 1000) VH 145 VH 300 (Mechanical / Electrical) (Mechanical / Electrical) - RC-EH 300 - VH 800 RC-EH 800 (Varistor + RC) Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/21 A 9 ... A 75 4-pole Contactors a.c. Operated Rated operational current AC-1 40 C A Auxiliary contacts fitted Footprint Weight kg Order code H W D state coil voltage - - - - - - 74 74 90 110 110 110 44 44 54 92 92 92 74 74 94 120 120 120 0.340 0.340 0.610 1.390 1.390 1.390 A 9-40-00 A 16-40-00 A 26-40-00 A 45-40-00 A 50-40-00 A 75-40-00 2 N.O. + 2 N.C. main poles 25 - - 30 - - 45 - - 70 - - 125 - - 74 74 90 110 110 44 44 54 92 92 74 74 94 120 120 0.340 0.340 0.610 1.400 1.400 A 9-22-00 A 16-22-00 A 26-22-00 A 45-22-00 A 75-22-00 4 N.O. main poles 25 30 45 70 100 125 A 9-40-00 - - - - - - Coil voltages Voltage V - 50Hz 24 48 110 220 ... 230 230 ... 240 380 ... 400 400 ... 415 A 45-40-00 Voltage V - 60Hz 24 48 110 ... 120 230 ... 240 240 ... 260 400 ... 415 415 ... 440 Other voltages on application Remark for A 9 ... A 75 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with 2 separate supplies, or 1 circuit comprising 2 separate loads with a single supply (see diagrams below). When the contactor operates there is no mechanical overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE. These contactors are not suitable for a reversing starter or star-delta starter or for controlling a single load from 2 separate supplies. A 9-22-00 Block diagrams Single supply and 2 separate loads 2 separate supplies and 2 separate loads Connections for 4-pole Changeover Contactors BES... for 4-pole connections Application Connection between the main poles of two 4-pole contactors mounted side by side so that they operate as source reversing contactors. Description These sets are made up of four downstream connections, with insulated, stranded, rigid copper cables. Mounting on 4-pole contactors A 45, A 50, A 75 1 Weight kg 1 set 0.400 Order code BES 75-40 Note: The connections provided for the A... contactors can be used for the AF, AE and TAE types. www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Return to main index Facsimile 02476 368401 2/22 A 9 ... A 75 4-pole Contactors Main Accessories Auxiliary Contact Blocks CAL 5-11 Mounting on contactors Positioning Contacts Weight kg Order code A 9 ... A 75 Front face 1 - 4 2 - 1 - 2 0.014 0.014 0.060 0.060 CA 5-10 CA 5-01 CA 5-40 E CA 5-22 E A 9 ... A 75 Side 1 1 0.050 CAL 5-11 Contacts Weight kg Order code Direct 0.1 ... 40 s Direct 10 ... 180 s Inverse 0.1 ... 40 s Inverse 10 ... 180 s 1 1 1 1 0.070 0.070 0.070 0.070 TP 40 DA TP 180 DA TP 40 IA TP 180 IA Feature Contacts Weight kg Order code A 9 ... A 26 A 45 ... A 75 Mech. / electrical - - 2 2 0.076 0.146 VE 5-1 VE 5-2 A 9 ... A 26 Mechanical - - 0.066 VM 5-1 CA 5-10 Pneumatic Timers Mounting on Timing range contactors A 9 ... A 75 1 1 1 1 TP 40 DA Interlocks Mounting on contactors Surge Suppressors Mounting on Feature contactors VE 5-1 RV 5/50 A 9 ... A 75 Varistor A 9 ... A 26 RC A 45 ... A 75 RC RC 5-1/50 Voltage range Weight kg Order code 24 ... 50 V a.c./d.c. 50 ... 133 V a.c./d.c. 110 ... 250 V a.c./d.c. 250 ... 440 V a.c./d.c. 0.015 0.015 0.015 0.015 RV 5/50 RV 5/133 RV 5/250 RV 5/440 24 ... 50 V a.c. 50 ... 133 V a.c. 110 ... 250 V a.c. 250 ... 440 V a.c. 0.012 0.012 0.012 0.012 RC 5-1/50 RC 5-1/133 RC 5-1/250 RC 5-1/440 24 ... 50 V a.c. 50 ... 133 V a.c. 110 ... 250 V a.c. 250 ... 440 V a.c. 0.015 0.015 0.015 0.015 RC 5-2/50 RC 5-2/133 RC 5-2/250 RC 5-2/440 Other Accessories A wide range of accessories are available. - various auxiliary contact blocks for specific controls and use, - interface relays, - connecting auxiliaries: strips, connectors, additional pieces, etc. - impulse contact blocks, lamp holder and fuse holder blocks, - function marker. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/23 EK 110 ... EK 1000 4-pole Contactors a.c. Operated Rated operationa current Auxiliary contacts fitted Footprint AC-1 q 40 C A 200 250 300 350 550 800 1000 EK 175-40-11 -E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 H W D 156 172 198 198 272 272 299 165 165 201 201 270 270 270 155 155 172 172 226 226 226 48 - - 110 110 120 220 ... 230 * 230 ... 240 - - 380 380 ... 400 440 400 ... 415 - + Other voltages: page 0/1. state coil voltage 4.300 4.350 6.600 6.600 17.20 17.20 17.50 EK 110-40-11 EK 150-40-11 EK 175-40-11 EK 210-40-11 EK 370-40-11 EK 550-40-11 EK 1000-40-11 Code A A A A A A A A Multi-frequency coils: EK 110 ... EK 210 Voltage V - 40 ... 400Hz E E E E E E Dual frequency coils (1): EK 370 ... EK 1000 Voltage Voltage V - 50Hz V - 60Hz 110 110 ... 115 220 220 ... 230 380 380 ... 400 D E F L M N P R 110 ... 120 115 ... 127 220 ... 240 230 ... 255 380 ... 415 400 ... 440 *Read 240V 60Hz for EK 370 ... EK 1000. Code 110 ... 120 115 ... 127 220 ... 230 230 ... 240 380 ... 400 400 ... 415 EK 1000-40-11 Order code = 40 ... 400 Hz coil with built-in rectifier. Coil voltages and codes: EK 110 ... EK 1000 Voltage Voltage V - 50Hz V - 60Hz EK 370-40-11 Weight kg F G L M P R Code E E E E E E F G L M P R (1) Two auxiliary contact blocks maximum per contactor, ambient temperature < 55 C and mounting positions 2 and 6 excluded. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/24 EK 110 ... EK 1000 4-pole Contactors Main Accessories Auxiliary Contact Blocks Mounting on Positioning contactors EK 110 ... EK 1000 Side Contacts Weight kg Order code 1 1 1 0.050 0.050 0.050 CAL 16-11 B CAL 16-11 C CAL 16-11 D Weight kg Order code 1 1 1 Interlocks for two horizontal mounted contactors Mounting on Feature Contacts contactors CAL 16-11 B EK 110, EK 150 EK 175, EK 210 EK 370, EK 550 EK 1000 Mech. / elec. - - 2 2 0.130 0.130 VH 145 VH 300 Mechanical - - 6.000 VH 800 Note: For interlocking between two contactors of a different size: + section 4. VH 145 RC-EH 300/48 Surge Suppressors Mounting on contactors Feature Voltage range Weight kg Order code EK 110 ... EK 210 RC EK 370 ... EK 1000 RC 24 ... 48 V a.c. 110 ... 415 V a.c. 48 ... 110 V a.c. 220 ... 600 V a.c. 0.015 0.015 0.015 0.015 RC-EH 300/48 RC-EH 300/415 RC-EH 800/110 RC-EH 800/600 Shrouds (terminal protection VDE 106, part 100) Mounting on Suitable for contactors contactor with Weight kg Order code EK 110, EK 150 EK 175, EK 210 EK 370, EK 550 EK 1000 0.139 0.152 0.190 0.200 LT 150-EK LT 210-EK LT 550-EK LT 1000-EK cable lugs or cable clamps Other Accessories A - - - LT 210-EK wide range of accessories are available: auxiliary contact blocks for specific controls and use, connecting auxiliaries: connectors for main poles, connections sets, plates for changeover contactors, etc. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/25 AF 45 ... AF 75 4-pole Contactors a.c. / d.c. Operated - Large Voltage Range Electronic Coil Interface Rated operational current AC-1 40 C A Auxiliary contacts fitted Footprint Weight kg Order code H W D - - - 110 110 110 92 92 92 120 120 120 1.420 1.420 1.420 AF 45-40-00 AF 50-40-00 AF 75-40-00 2 N.O. + 2 N.C. main poles 70 - - 125 - - 110 110 92 92 120 120 1.420 1.420 AF 45-22-00 AF 75-22-00 4 N.O. main poles 70 100 125 - - - state coil voltage AF 75-40-00 Coil voltages Voltage V - 50/60Hz Voltage V d.c. - 48 ... 130 100 ... 250 20 ... 60 48 ... 130 100 ... 250 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. Remark for AF 45 ... AF 75 4-pole contactors built with 2 N.O. + 2 N.C. main poles These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with 2 separate supplies, or 1 circuit comprising 2 separate loads with a single supply (+ diagrams below). When the contactor operates there is no mechanical overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE. These contactors are not suitable for a reversing starter or star-delta starter or for controlling a single load from 2 separate supplies. Block Diagrams Single supply and 2 separate loads 2 separate supplies and 2 separate loads Electromagnetic compatibility: AF... contactors comply with international standards IEC 60947-1 (2000-10-Ed.3.1), 60947-4-1 (2000-11Ed.2) and European standards EN 60947-1, 60947-4-1. Notice: This product has been designed for environment A. Use of this product in environment B may cause unwanted electromagnetic disturbances in which case the user may be required to take adequate mitigation measures. Definitions: Environment A: "Mainly relates to low-voltage non public or industrial networks/locations/installations (+ EN 50082-2 article 4) including highly disturbing sources". Environment B: "Mainly relates to low-voltage public networks (+ EN 50082-1 article 5) such as residential, commercial and light industrial locations/installations. Highly disturbing sources such as arc welders are not covered by this environment". Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/26 EK 110 ... EK 1000 4-pole Contactors d.c. Operated Rated operational current AC-1 40 C A 200 250 300 350 550 800 1000 EK 175-40 Auxiliary contacts fitted 2 2 2 2 2 2 2 1 1 1 1 1 1 1 Footprint Weight kg H W D 156 172 198 198 272 272 299 136 136 176 176 296 296 296 155 155 172 172 226 226 226 Order code state coil voltage 4.350 4.400 6.650 6.650 17.20 17.20 17.50 EK 110-40-21 EK 150-40-21 EK 175-40-21 EK 210-40-21 EK 370-40-21 EK 550-40-21 EK 1000-40-21 Coil voltages and codes Voltage Code V d.c. 12 (1) D A 24 D B 36 D C 48 D D 60 D T 75 D G 110 D E 125 D U 220 D F EK 370-40 (1) Not for EK 370 ... EK 1000 contactors. For Accessories see page ?? EK 1000-40 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/27 Contactors for Capacitor Switching AC-6b Utilization Category according to IEC 60947-4-1 Capacitor Transient Conditions In Low Voltage industrial installations, capacitors are mainly used for reactive energy correction (raising the power factor). When these capacitors are energized, overcurrents of high amplitude and high frequencies (3 to 15 kHz) occur during the transient period (1 to 2 ms). The amplitude of these current peaks, also known as "inrush current peaks", depends on the following factors: * The network inductances. * The transformer power and short-circuit voltage. * The type of power factor correction. There are 2 types of power factor correction: fixed or automatic. Fixed power factor correction consists of inserting, in parallel on the network, a capacitor bank whose total power is provided by the assembly of capacitors of identical or different ratings. The bank is energized by a contactor that simultaneously supplies all the capacitors (a single step). The inrush current peak, in the case of fixed correction, can reach 30 times the nominal current of the capacitor bank. Fixed power factor correction An automatic power factor correction system, on the other hand, consists of several capacitor banks of identical or different ratings (several steps), energized separately according to the value of the power factor to be corrected. An electronic device automatically determines the power of the steps to be energized and activates the relevant contactors. The inrush current peak, in the case of automatic correction, depends on the power of the steps already on duty, and can reach 100 times the nominal current of the step to be energized. Automatic power factor correction Steady State Condition Data The presence of harmonics and the network's voltage tolerance lead to a current, estimated to be 1.3 times the nominal current In of the capacitor, permanently circulating in the circuit. Taking into account the manufacturing tolerances, the exact power of a capacitor can reach 1.15 times its nominal power. Standard IEC 831-1 Edition 04/97 specifies that the capacitor must therefore have a maximum thermal current IT of: IT = 1.3 x 1.15 x In = 1.5 x In Consequences for the Contactors To avoid malfunctions (welding of main poles, abnormal temperature rise, etc.), contactors for capacitor bank switching must be sized to withstand: * A permanent current that can reach 1.5 times the nominal current of the capacitor bank. * The short but high peak current on pole closing (maximum permissible peak current I ). ABB offers 3 contactor versions according to the value of the inrush current peak and the power of the capacitor bank A... and AF... standard contactors (A 12... A 300 and AF 400 ... AF 750) UA... Contactors for capacitor switching (UA 16 ... UA 110) UA...-R Contactors for capacitor switching (UA 16-R ... UA 75-R) with insertion of damping resistors Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/28 A... Standard 3-pole Contactors for Capacitor Switching Peak Current I < 30 Times the rms Current Application The A... and AF... contactors are suited for capacitor bank switching for the peak current and power values in the table below. The kvar ratings acc. to the table below are applicable to "star" connected capacitors (less current, cable savings). The capacitors must be discharged (maximum residual voltage at terminals < 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. Description * * A 12 ... A 110 3-pole contactors A 145 ... AF 750 3-pole contactors Selection Table Type Powers in kvar 50/60 Hz (AC - 6b) 220/240 V 40 C 55 C 70 C 380/400 V 40 C 55 C 70 C 415/440 V 40 C 55 C 70 C 500/550V 40 C 55 C 70 C 660/690 V 40 C 55 C 70 C Max. peak current I (kA) A9 - - - - - - - - - - - - - - A 12 7 7 6 11 11 9.5 12 12 10.5 14 14 12 19 19 16.5 0.7 A 16 7.5 7.5 6 12.5 12.5 10 14 14 10.5 15.5 15.5 12 21.5 21.5 16.5 1 A 26 11.5 11.5 9 19 19 15 20 20 16.5 23 23 19 32 32 26 1.6 A 30 13 13 11 22 22 18.5 24 24 20.5 28 28 23 38 38 32 1.9 A 40 15 15 12 26 26 20 29 29 22 35 35 25 46 46 34.5 2.1 A 50 22 22 20 38 38 34 42 42 37 48 48 42 65 65 58.5 2.3 A 63 25 25 23 43 43 39 47 47 42.5 54 54 48.5 74 74 67 2.5 A 75 28 28 24.5 48 48 41 52 52 45 60 60 51 82 82 70 2.6 A 95 35 35 33 60 60 53 63 63 58 75 75 70 80 80 75 4 A 110 40 40 35 70 70 60 75 75 65 83 83 78 90 90 85 4 A 145 50 50 42 90 90 74 93 93 80 110 110 96 110 110 110 4 A 185 60 60 45 105 105 78 115 115 85 135 135 102 135 135 135 5 A 210 75 75 57 125 125 100 135 135 110 160 160 130 160 160 160 6.5 A 260 85 85 70 140 140 130 155 155 140 180 180 165 200 200 200 8 A 300 100 100 85 160 160 150 180 180 163 210 210 196 240 240 240 8 AF 400 120 120 105 200 200 185 220 220 200 260 260 241 300 300 300 10 - - AF 460 140 140 120 230 230 215 260 260 230 325 325 300 325 325 325 10 AF 580 170 170 160 270 270 260 300 300 290 350 350 340 440 440 440 12 AF 750 220 220 190 390 370 332 410 410 380 490 480 435 600 600 600 12 If, in an application, the current peak is greater than the maximum peak current I specified in the last column in the table, select a higher rating, refer to the UA... contactors (+ page 2/38) or add inductances (+ Application Guide "Contactors for Capacitor Switching"). The capacitor bank will be protected by gG type fuses whose rating is equal to 1.5 ... 1.8 times nominal current. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/29 UA... 3-pole Contactors for Capacitor Switching Peak Current I < 100 Times the rms Current Application The UA.. contactors have been specially developed for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current I values accepted by the contactor. The kvar ratings acc. to the table below are applicable to "star" connected capacitors (less current, cable savings). The capacitors must be discharged (maximum residual voltage at terminals < 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. Selection Table Type Powers in kvar 50/60 Hz (AC - 6b) 440 V 500/550 V Max.permissible peak current I (kA) Ue Ue 230/240 V 400/415 V 40 C 55 C 70 C 40 C 55 C 70 C 40 C 55 C 70 C 40 C 55 C 70 C 660/690 V 40C 55C 70 C < 500 V > 500 V UA 16 UA 26 UA 30 7.5 12 16 6.7 11 16 6 8.5 11 12.5 20 27.5 11.7 18.5 27.5 10 14.5 19 13.7 22 30 13 20 30 11 16 20 15.5 22 34 14.7 22 34 12.5 19.5 23.5 21.5 30 45 20 30 45 17 25 32 1.8 3 3.5 1.6 2.7 3.1 UA 50 UA 63 UA 75 20 25 30 20 25 30 19 21 22 33 45 50 33 43 50 32 37 39 36 50 55 36 48 53 35 41 43 40 50 62 40 50 62 40 45 47.5 55 70 75 55 70 75 52 60 65 5 6.5 7.5 4.5 5.8 6.75 UA 95 35 UA 110 40 35 39 29 34 60/65* 60/65* 50/55* 65 74 70/75* 65 75 65 75 55 67 70 80 70 80 60 75 86 90 86 90 70 85 9.3 10.5 8 9 (*) Use these values for U e = 415 V For 220 V and 380 V, multiply by 0.9 the rated values at 230 V and 400 V respectively. Example: 50 kvar/400 V corresponding to 0.9 x 50 = 45 kvar/380 V. If, in an application, the current peak is greater than the maximum peak current I specified in the table above, select a higher rating, refer to the UA...-R contactors (+ page 2/40) or add inductances (+ Application Guide "Contactors for Capacitor Switching"). The capacitor bank will be protected by gG type fuses whose rating is equal to 1.5 ... 1.8 times nominal current. Power 400 V 40 C kvar 12.5 20 27.5 33 45 50 60 74 Max. peak current Ue 500V kA 1.8 3 3.5 5 6.5 7.5 9.3 10.5 Coil voltages Voltage V - 50Hz 24 48 110 220...230 230...240 380...400 400...415 Auxiliary contacts fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 Footprint Weight kg H W D 74 90 90 110 110 110 148 148 44 54 54 82 82 82 102 102 74 94 109 108 108 108 124 124 0.340 0.600 0.710 1.200 1.200 1.200 2.040 2.040 Order code state coil voltage UA 16-30-10 UA 26-30-10 UA 30-30-10 UA 50-30-11 UA 63-30-11 UA 75-30-11 UA 95-30-11 UA 110-30-11 Voltage V - 60Hz 24 48 110...120 230...240 240...260 400...415 415...440 (1) Not for EK 370 ... EK 1000 contactors. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/30 UA...-R 3-pole Contactors for Capacitor Switching Peak Current I 100 Times the rms Current Application The UA ...-R contactors can be used in installations in which peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (+ table below). The kvar ratings acc. to the table below are applicable to "star" connected capacitors (less current, cable savings). The capacitors must be discharged (maximum residual voltage at terminals < 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for U e 500 V. Selection Table Type Powers in kvar - 50/60 Hz (AC-6b) 220/240 V UA 16-30-10-R 380/400/415 V 440 V 500/550 V Max. permissible peak current 660/690 V 40 C 55 C 70 C 40 C 55 C 70 C 40 C 55 C 70 C 40 C 55 C 70 C 40 C 55 C 70 C 8 7.5 6 12.5 12.5 10 15 13 11 18 16 12.5 22 21 17 I gG type fuses max. (*) 80 UA 26-30-10-R 12.5 11.5 9 22 20 15.5 24 20 17 30 25 20 35 31 26 125 UA 30-30-10-R 16 16 11 30 27.5 19.5 32 30 20.5 34 34 25 45 45 32 200 UA 50-30-00-R 25 24 20 40 40 35 50 43 37 55 50 46 72 65 60 200 UA 63-30-00-R 30 27 23 50 45 39 55 48 42.5 65 60 50 80 75 65 200 UA 75-30-00-R 35 30 25 60 50 41 65 53 45 75 65 55 100 80 70 200 (*) The fuse ratings given in this column represent the maximum ratings ensuring type 1 co-ordination according to the definition of standard IEC 60947-4-1. Power 400 V 40 C kvar 12.5 22 30 40 50 60 Auxiliary contacts fitted 1 1 1 - Coil voltages Voltage V - 50Hz 24 48 110 220...230 230...240 380...400 400...415 - Footprint Weight kg H W D 140 140 140 160 160 160 44 54 54 70 70 70 106 125 140 139 139 139 0.460 0.710 0.810 1.350 1.350 1.350 Order code state coil voltage UA 16-30-10-R UA 26-30-10-R UA 30-30-10-R UA 50-30-00-R UA 63-30-00-R UA 75-30-00-R Voltage V - 60Hz 24 48 110...120 230...240 240...260 400...415 415...440 please contact us for other voltages Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/31 N... Contactor Relays a.c. Operated Application N... contactor relays are used for switching auxiliary circuits and control circuits. Location of surge suppressors. Quick fixing on mounting rail according to IEC 715 and EN 50022 standards: 35 x 7.5 mm or 35 x 15 mm. Clear marking of coil voltages and frequencies. Location of side-mounted accessories (on right or left hand side) . Terminal marking according to IEC 60947-5-1, and EN 50011. Holes for screw fixing (screws not supplied) . Distance between holes according to EN 50002. Location of function marker. Stops for attaching front-mounted accessories. Terminals delivered in open position with captive screws. Screwdriver guidance for all terminals. Degree of protection of terminals according to IEC 60947-1: IP 20 for all terminal. Terminal screws: Pozidriv (+,-) No. 2. Number of contacts Footprint H Weight kg W D Order code state coil voltage 4-pole, 1-stack 2 2 74 44 74 0.340 N 22 E 3 1 74 44 74 0.340 N 31 E 4 - 74 44 74 0.34 N 40 E Coil voltages Voltage V - 50Hz 24 48 110 220 ... 230 230 ... 240 380 ... 400 400 ... 415 Voltage V - 60Hz 24 48 110 ... 120 230 ... 240 240 ... 260 400 ... 415 415 ... 440 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/32 N/KC... Contactor Relays Main Accessories Auxiliary Contact Blocks Mounting on Positioning contactor kg relays N/KC... CAL 5-11 CA 5-10 Front face N Side Pneumatic Timers Mounting on Timing range contactor relays N/KC... TP 40 DA Interlocks Mounting on contactor relays N... KC N... Weight Order Code 1 - 0.014 CA 5-10 - 1 0.014 CA 5-01 4 - 0.060 CA 5-40 N 2 2 0.060 CA 5-22 N - 4 0.060 CA 5-04 N 1 1 0.050 CAL 5-11 Weight kg Order Code Contacts Direct 0.1 ... 40 s 1 1 0.070 TP 40 DA Direct 10 ... 180 s 1 1 0.070 TP 180 DA Inverse 0.1 ... 40 s 1 1 0.070 TP 40 IA Inverse 10 ... 180 s 1 1 0.070 TP 180 IA Feature Contacts Weight kg Order Code Mech. / electrical - 2 0.076 VE 5-1 Mechanical - - 0.066 VM 5-1 Mechanical - - 0.015 VBC30 Weight kg Order Code Surge Suppressors Mounting on Feature contactor relays VE 5-1 Contacts Varistor Voltage range 24 ... 50 V a.c./d.c. 50 ... 133 V RV 5/50 RC 5-1/50 RC a.c./d.c. 0.015 RV 5/50 0.015 RV 5/133 RV 5/250 110 ... 250 V a.c./d.c. 0.015 250 ... 440 V a.c./d.c. 0.015 RV 5/440 0.012 RC 5-1/50 24 ... 50 V a.c. 50 ... 133 V a.c. 0.012 RC 5-1/133 110 ... 250 V a.c. 0.012 RC 5-1/250 250 ... 440 V a.c. 0.012 RC 5-1/440 Other accessories A - - - - wide range of accessories are available: various auxiliary contact blocks for specific controls and use, interface relays, fuse holder blocks, function marker. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/33 KC... Contactor Relays d.c. Operated with Solid Magnetic Coil Application KC... contactor relays are used for switching auxiliary circuits and control circuits. Dove tail anchoring for surge suppressor assembly. Quick fixing on mounting rail according to IEC 715 and EN 50022 standards: 35 x 7.5mm or 35 x 15mm Clear marking of coil d.c. voltage. Terminal Screw: M 3.5 Pozidriv (+, -) Nr 2. Terminal marking according to IEC 0947-5-1 and EN 50011 standards. Holes for screw fixing (screws not supplied). Distance between holes according to EN 50002. Terminals delivered in open position with captive screws. Screwdriver guidance for all terminals. Degree of protection of terminals according to IEC 60947-1: - Pole terminals: IP20 - Coil terminals: IP20 Stops for attaching front-mounted accessories Location of function marker. Number of contacts 4-pole, 1-stack 2 2 3 1 4 - Coil voltages Voltage - Uc V d.c. 12 24 42 48 50 60 75 110 125 220 240 250 Footprint Weight kg H W D 81 81 81 44 44 44 114 114 114 Order code state coil voltage 0.540 0.540 0.540 KC 22 E KC 31 E KC 40 E Please consult us: For contactor relays with wide range coils For accessories (see pagex/xx) Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/34 Contactor Spares a.c. Operated coils for A9...A300 contactors and N contactor relays For contactors Weight (kg) Order Code A9...A16 : UA16 : UA16..-R : N 0.093 ZA16 A26...A40 : UA26, UA30, UA26..-R, UA30..-R 0.148 ZA40 A45...A75 : UA50...UA75, UA50...-R to UA75..-R; GA75 0.166 ZA75 A95...A110 ; UA95...UA110 0.170 ZA110 A145...A185 0.180 ZA185 A210...A300 0.400 ZA300 a.c./d.c. Operated coils c/w electronic interface for AF 45...AF750 contactors For contactors Weight (kg) Order Code AF45...AF75 0.170 ZAF75 AF95, AF110 0.200 ZAF110 AF145...AF185 0.225 ZAF185 AF210...AF300 0.450 ZAF300 AF400...AF460 0.525 ZAF460 AF580...AF750 1.335 ZAF750 d.c. Operated coils for AE9...AE110 contactors For contactors Weight (kg) Order Code AE9...AE16 0.093 ZAE16 AE26...AE40 0.148 ZAE40 a.c. or d.c. coils only For contactors Weight (kg) Order Code EK110, EK150 0.360 KH210 EK175, EK210 0.440 KH300 EK370, EK550, EK1000 0.950 KH800 Sets including a d.c. coil, an economy resistor and an insertion contact For contactors Weight (kg) Order Code EK110, 150 0.450 KP210 EK175, 210 0.550 KP300 EK370, EK550, EK1000 1.060 KP800 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/35 Contactor Spares Main contact sets for 3-pole Contactors The contact sets for 3-pole contactors consist of six fixed contacts, three moving contacts, springs and the necessary screws. For contactors Weight (kg) A/AF/AE/TAE 50-30 0.115 Order Code ZL50 A/AF/AE/TAE 63-30 0.130 ZL63 A/AF/AE/TAE 75-30 0.145 ZL75 A/AF/AE/TAE 95-30 0.190 ZL95 A/AF/AE/TAE 110-30 0.190 ZL110 A/AF 145 0.380 ZL145 A/AF 185 0.380 ZL185 A/AF 210 0.670 ZL210 A/AF 260 0.670 ZL260 A/AF 300 0.670 ZL300 AF 400 1.320 ZL400 ZL460 AF 460 1.320 AF 580 1.840 ZL580 AF 750 1.840 ZL750 UA 50, UA 50-R 0.115 ZLU50 UA 63, UA 63-R 0.145 ZLU63 ZLU75 UA 75, UA 75-R 0.145 UA 95 0.190 ZLU95 UA 110 0.190 ZLU110 Main contact sets for 4-pole Contactors The contact sets for 4-pole contactors consist of eight fixed contacts, four moving contacts, springs and the necessary screws. For contactors Weight (kg) Order Code A/AF 45-40 0.150 ZLT45 A/AF 50-40 0.150 ZLT50 A/AF 75-40 0.160 ZLT75 The contact sets for 4-pole contactors consist of eight fixed contacts, four moving contacts, springs and the necessary screws. In addition, the sets include four moving arcing contacts for EK370...EK1000 contactors. For contactors Weight (kg) Order Code EK 110 0.450 KZK110 EK 150 0.450 KZK150 EK 175 0.700 KZK175 EK 210 0.700 KZK210 EK 370 2.400 KZK370 EK 550 2.400 KZK550 EK 1000 3.000 KZK1000 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/36 Mini contactors B6...B7, BC6...BC7 Ordering details Rated current AC-3 415 V A fitted AC-1 < 40C A Screw Aux. contacts Kw H 3 & 4 pole 8.5 20 11.5 20 4 5.5 B6-30-10 Flat pin 11.5 20 4 5.5 B6-30-10F Soldering pin 3 pole 8.5 4 20 11.5 B6-30-10P 20 Screw 20 11.5 20 Flat pin 8.5 11.5 AC operation 58 53 47 0.18 B6.30.10* - 1 58 53 47 0.18 B6.30.01* - - 58 53 47 0.18 B6.40.00* 1 - 58 53 47 0.18 B7.30.10* - 1 58 53 47 0.18 B7.30.01* - - 58 53 47 0.18 B7.40.00* - 58 53 47 0.17 B6.30.10F* - 1 58 53 47 0.17 B6.30.01F* - - 58 53 47 0.17 B6.40.00F* AC operation 1 - 58 53 47 0.17 B7.30.10F* - 1 58 53 47 0.17 B7.30.01F* - - 58 53 47 0.17 B7.40.00F* 1 - 45 48 48 0.17 B6.30.10P* - 1 45 48 48 0.17 B6.30.01P* AC operation 1 - 45 48 48 0.17 B7.30.10P* - 1 45 48 48 0.17 B7.30.01P* 3 & 4 pole 8.5 B7-30-10 5.5 4 5.5 DC operation 1 - 58 53 47 0.18 BC6.30.10* - 1 58 53 47 0.18 BC6.30.01* - - 58 53 47 0.18 BC6.40.00* 1 - 58 53 47 0.18 BC7.30.10* - 1 58 53 47 0.18 BC7.30.01* - - 58 53 47 0.18 BC7.40.00* BC6.30.10F* 3 & 4 pole 20 20 4 5.5 Order code - 3 & 4 pole 20 Weight kg 1 1 8.5 Footprint W D DC operation 1 - 58 53 47 0.17 - 1 58 53 47 0.17 BC6.30.01F* - - 58 53 47 0.17 BC6.40.00F* BC7.30.10F* 1 - 58 53 47 0.17 - 1 58 53 47 0.17 BC7.30.01F* - - 58 53 47 0.17 BC7.40.00F* 1 - 45 48 48 0.17 BC6.30.10P* - 1 45 48 48 0.17 BC6.30.01P* B7-40-10 Soldering pin 3 pole 8.5 4 11.5 B7-40-10 + CAF6-11 20 20 5.5 DC operation 1 - 45 48 48 0.17 BC7.30.10P* - 1 45 48 48 0.17 BC7.30.01P* *Please state coil voltage/freqency when ordering Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/37 Mini contactors VB6...VB7, VBC6...VBC7 Reversing Pairs Rated current AC-3 415 V A fitted AC-1 < 40C A Kw Screw Aux. contacts H 3 pole Footprint W D Weight kg Order code AC operation 8.5 20 4 1 - 58 - 1 11.5 20 5.5 1 - 1 97 47 0.34 VB6.30.10* 58 97 47 0.34 VB6.30.01* 58 97 47 0.34 VB7.30.10* 58 97 47 0.34 VB7.30.01* VB6.30.10F* VB 7-30-01 Flat pin 8.5 3 pole 20 11.5 20 4 5.5 Soldering pin 3 pole 8.5 4 20 11.5 20 Screw 5.5 1 - 58 97 47 0.34 - 1 58 97 47 0.34 VB6.30.01F* 1 - 58 97 47 0.34 VB7.30.10F* - 58 97 47 0.34 VB7.30.01F* 20 11.5 20 Flat pin 4 5.5 AC operation 58 97 47 0.34 VB6.30.10P* - 58 97 47 0.34 VB6.30.01P* 1 - 58 97 47 0.34 VB7.30.10P* - 58 97 47 0.34 VB7.30.01P* 20 4 11.5 20 5.5 Soldering pin 3 pole 8.5 4 20 20 5.5 1 1 DC operation 1 - 58 97 47 0.34 VBC6.30.10* - 1 58 97 47 0.34 VBC6.30.01* 1 - 58 97 47 0.34 VBC7.30.10* - 58 97 47 0.34 VBC7.30.01* 0.34 VBC6.30.10F* VBC6.30.01F* 3 pole 8.5 1 1 - 3 pole 8.5 11.5 AC operation 1 DC operation 1 - 58 97 47 - 1 58 97 47 0.34 1 - 58 97 47 0.34 VBC7.30.10F* - 58 97 47 0.34 VBC7.30.01F* VBC6.30.10P* 1 DC operation 1 - 58 97 47 0.34 - 1 58 97 47 0.34 VBC6.30.01P* 1 - 58 97 47 0.34 VBC7.30.10P* - 58 97 47 0.34 VBC7.30.01P* 1 * Please state coil voltage/frequency when ordering Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/38 Mini Contactors 3 Pole BC6 Interface Contactors Rated current AC-3 415 V A fitted AC-1 < 40C A Screw Aux. contacts Kw 3 pole 8.5 20 Flat pin 8.5 20 4 H Footprint W D Weight kg Order code DC 24v - 1.4w 1 - 58 53 47 0.17 BC6.30.10.1.4* - 1 58 53 47 0.17 BC6.30.01.1.4* 3 pole DC 24v - 1.4w 4 1 - 58 53 47 0.17 BC6.30.10.F1.4* - 1 58 53 47 0.17 BC6.30.01.F1.4* Soldering pin 3 pole DC 24v - 1.4w 8.5 1 - 45 48 48 0.17 BC6.30.10.P1.4* - 1 45 48 48 0.17 BC6.30.01.P1.4* H Footprint W D Weight kg Order code 20 Rated current AC-3 415 V A fitted AC-1 < 40C A Screw 8.5 20 Flat pin 8.5 20 4 Aux. contacts Kw 3 pole DC 17 ... 32v - 2.4w 4 1 - 58 53 47 0.18 BC6.30.10.2.4* - 1 58 53 47 0.18 BC6.30.01.2.4* 3 pole DC 17 ... 32v - 2.4w 4 1 - 58 53 47 0.18 BC6.30.10.F2.4* - 1 58 53 47 0.18 BC6.30.01.F2.4* Soldering pin 3 pole DC 17 ... 32v - 2.4w 8.5 1 - 45 48 48 0.18 BC6.30.10.P2.4* - 1 45 48 48 0.18 BC6.30.01.P2.4* 20 4 Please consult us for 5.5kw version Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/39 Mini Relays 4 Pole K6/KC6 Ordering details AC Operation Screw connection 4 pole Rated current fitted AC-1 < 40C A H Footprint W D Weight kg Order code 58 53 47 0.18 K6.40E* 20 KC6-40E-P Contact Configuration 4 - 3 1 58 53 47 0.18 K6.31Z* 2 2 58 53 47 0.18 K6.22Z* 4 pole Relay 4 - 58 53 47 0.17 K6.40E-F* 3 1 58 53 47 0.17 K6.31Z-F* 2 2 58 53 47 0.17 K6.22Z-F* Flat pin connection 20 Soldering pin connection 20 Relay 4 pole Relay 4 - 45 48 48 0.18 K6.40E-P* 3 1 45 48 48 0.18 K6.31Z-P* 2 2 45 48 48 0.18 K6.22Z-P* Weight kg Order code DC Operation Screw connection 4 pole Rated current fitted AC-1 < 40C A H 20 Contact configuration D - 58 53 47 0.18 3 1 58 53 47 0.18 KC6.31Z* 2 2 58 53 47 0.18 KC6.22Z* KC6.40E-F* 4 pole KC6.40E* Relay 4 - 58 53 47 0.17 3 1 58 53 47 0.17 KC6.31Z-F* 2 2 58 53 47 0.17 KC6.22Z-F* 4 - 45 48 48 0.17 KC6.40E-P* 3 1 45 48 48 0.17 KC6.31Z-P* 2 2 45 48 48 0.17 KC6.22Z-P* Soldering pin 20 Footprint W 4 Flat pin connection 20 Relay 4 pole Relay Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/40 Accessories for mini contactors Ordering details B, BC, K, KC Auxiliary contacts Mounting on B6.30.10 B7.30.10 CAF6- 11M 1 Position Weight Order code 1 side 0.030 CA6.11M B6.30.01 B7.30.01 1 1 side 0.030 CA6.11N B6.40.00 B7.40.00 1 1 side 0.030 CA6.11E B6.30.10 B7.30.10 1 1 front face 0.035 CAF6.11M B6.30.10 B7.30.10 2 - front face 0.035 CAF6.20M B6.30.10 B7.30.10 - 2 front face 0.035 CAF6.02M B6.30.01 B7.30.01 1 1 front face 0.035 CAF6.11N CAF6.20N B6.30.01 B7.30.01 2 - front face 0.035 B6.30.01 B7.30.00 - 2 front face 0.035 CAF6.02N B6.40.00 B7.40.00 1 1 front face 0.035 CAF6.11E B6.40.00 B7.40.00 2 - front face 0.035 CAF6.20E B6.40.00 B7.40.00 - 2 front face 0.035 CAF6.02E K, KC 1 1 side 0.030 CA6.11K K, KC 1 1 front face 0.035 CAF6.11K K, KC 2 - front face 0.035 CAF6.20K K, KC - 2 front face 0.035 CAF6.02K Note: Side or front mounted auxiliaries can be fitted, but not together. B, BC, K, KC Accessories Cover cap LT 6-B Reversing connecting link BSM 6-30 Description Mounting on Weight kg with soldering pins B, BC, K, KC 0.014 Order code LB6 with soldering pins CA6.11 0.006 LB6.CA identification marker front face 0.017 BA-50 protective cover IP20 B, BC, K, KC 0.001 LT6-B plunger (manual opp) B, BC, K, KC 0.060 BN6 reversing links VB, VBC 0.010 BSM6.30 parallel links B, BC 0.001 LP6 T7 Thermal overloads Setting range A Footprint H W D Weight kg Order code 0.10 ... 0.16 55 45 56 0.070 T7DU0.16 T7DU0.24 0.16 ... 0.24 55 45 56 0.070 0.24 ... 0.40 55 45 56 0.070 T7DU0.4 0.40 ... 0.60 55 45 56 0.070 T7DU0.6 0.60 ... 1.0 55 45 56 0.070 T7DU1.0 1.0 ... 1.6 55 45 56 0.070 T7DU1.6 1.6 ... 2.4 55 45 56 0.070 T7DU2.4 2.4 ... 4.0 55 45 56 0.070 T7DU4.0 4.0 ... 6.0 55 45 56 0.070 T7DU6.0 6.0 ... 9.0 55 45 56 0.070 T7DU9.0 9.0 ... 12.0 55 45 56 0.070 T7DU12.0 Note: 1 n/o + 1 n/c auxiliary contact fitted as standard to the overload Dimension (H) is from the bottom of the contactor to the bottom of the overload Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/41 Manual Motor Starters Type series MS Manual motor starter Type MS 116 MS 325 MS 450 MS 495 947-1 947-2 947-4-1 947-5-1 947-1 947-2 947-4-1 947-5-1 General technical data Standards: The devices comply with the major international, European and national regulations IEC 60../EN 60.. 947-1 947-2 947-4-1 947-5-1 Disconnector characteristics (to IEC/EN 60947-1) 947-1 947-2 947-4-1 947-5-1 yes Mechanical service life in operations - 100.000 Permissible ambient temperature - open - encapsulated (in protective housing) - Storage temperature C C C yes yes yes yes 100.000 1) - 20... + 55/70 on request - 50 ... + 80 yes 50.000 - 25 ... + 55 1) - 25 ... + 40 - 50 ... + 80 Temperature compensation yes - 20 ... + 60/70 - 20 ... + 35 - 50 ... + 80 1) with Mounting position as illustrated Permissible altitude m Permissible resistance to vibrations (IEC 68-2-6) any 6) 3000 3000 2000 10-150 Hz Amplitude 5 g 10-150 Hz Amplitude 5 g on request on request 25 g (11 ms) 15 g (11 ms) on request on request to EN 50022 see accessories 35 mm see accessories 35 mm 2 x M5 35 mm, to EN 50023 - - 2 x M5 35 mm (15 mm high) - 2) Permissible resistance to shocks sinusoidal shock (IEC 68-2-27) Mounting (mounting hardware not included in scope of delivery) Screw fixing Quick fastening on top-hat rail Electrical connection of the main conductors (main circuits) Type Screw terminal Box terminal Screw Pozidrive size 2 Pozidrive size 2 1 ... 4 1 ... 4 1 ... 4 1 ... 4 0.75 ... 2.5 0.75 ... 2.5 1 ... 10 1 ... 4 1 ... 10 - 1 ... 6 - Single-core1 x mm2 2 x mm2 Stranded1 x mm2 2 x mm2 Flexible1 x mm2 2 x mm2 of the auxiliary conductors (auxiliary circuits) Type Screw Single-core1 x mm2 2 x mm2 Flexible1 x mm2 2 x mm2 1) Operating conditions up to 70 C on request 3) Also applies to auxiliary switches HKF1 and undervoltage release UA1 5) Applies to auxiliary switches HK1 and SK1 www.abb.com/lowvoltage ABB LIMITED Screw terminal Pozidrive size 2 1 ... 2.5 5) 1 ... 2.5 0.75 ... 2.5 0.75 ... 2.5 Box terminal + bus Pozidrive size 2 4 mm 0.75 ... 35 0.75 ... 25 0.75 ... 35 0.75 ... 25 0.75 ... 25 0.75 ... 16 Screw terminal 4) Pozidrive size 1 0.5 ... 2.5 0.5 ... 2.5 0.5 ... 2.5 0.5 ... 2.5 75 mm Box terminal Internal hexagon 2.5 ... 70 2.5 ... 50 2.5 ... 70 2.5 ... 50 2.5 ... 50 2.5 ... 35 Screw terminal Pozidrive size 2 0.5 ... 2.5 0.5 ... 2.5 0.5 ... 1.5 0.5 ... 1.5 2) G-values refer to the mounting position subject to the highest shock sensitivity 4) For auxiliary switch HKF.. Pozidrive 2 6) Other mounting posistions on request email marketing.info@gb.abb.com Return to main index Telephone 02476 368551 Facsimile 02476 368401 2/42 Manual motor starter Type MS 116 MS 325 MS 450 MS 495 V AC V AC 690 600 690 600 690 600 V 690 AC/440 DC 690 AC/440 DC 690 AC/440 DC 690 AC/440 DC kV 6 -/6 6 6 A 16 25 50 100 General electrical data Rated insulation voltage Ui to EN 60947 to CSA / UL / NEMA Rated operating voltage U e up to Rated impulse strength Uimp Rated continuous thermal current Ith 690 600 Rated operating current Ie / AC 3 max. Rated frequency Hz 1) Rated current ranges Ie (number of ranges) 50/60 A 0.1 ... 25 (14) 11 ... 50 (7) 28 ... 100 (6) 100 Rated service short-circuit breaking capacity Ics and max. permissible back-up fuses on request DC rated operating voltage in the case of series connection of 3 main circuits (wiring diagram on request) DC 1, 60 V A on request 25 50 DC 3, 60 V A on request 25 50 100 DC 5, 60 V A on request 25 50 100 Short circuit capacity for DC-rating on request Auxiliary circuits Rated operating current Ie at AC 15 to 24 V AC A 230 V AC A 400 V AC A 6 4 3 2.5 2 1 - 3 / 0.5 / 6 1.5 / - / 3 at DC 13 to24 V DC A 60 V DC A 110 V DC A 220 V DC A 440 V DC A 2 - 0.5 0.25 0.1 2.5 2.5 0.6 0.25 - -/-/- - / 0.15 / - 0.22 / - / 0.5 0.1 / - / 0.25 - / - / 0.1 on request 10 6 gL / gG 10 A - 1) 2) Short-circuit protection back-up fuse gL A aM A 1 ) Correction factors for other frequencies on request 2 ) On front side 1 changeover contact/on front side 1 NO + 1 NC / at side 1 NO + 1 NC, 2 NO, 2 NC 3 ) Other data on request Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/43 Manual Motor Starter MS 116 Open design, enclosure IP 20, resistant to changeable climates. Quick fastening on mounting rails DIN EN 50 022, 35 mm without auxiliary switch. Setting range Weight Order code A...A kg MS 116 with thermal and electromagnetic trips, short-circuit-proof up to 50 kA MS 116 0.10....0.16 0.268 MS 116 - 0.16 0.16....0.25 0.268 MS 116 - 0.25 0.25....0.40 0.268 MS 116 - 0.4 0.40....0.63 0.268 MS 116 - 0.63 0.63....1.00 0.268 MS 116 - 1.0 1.00....1.60 0.268 MS 116 - 1.6 1.60....2.50 0.268 MS 116 - 2.5 2.50....4.00 0.268 MS 116 - 4 4.00....6.30 0.268 MS 116 - 6.3 6.30....10.00 0.268 MS 116 - 10.0 10.00....16.00 0.268 MS 116 - 16.0 HKF 1-11 Accessories Order code Auxillary switches, for front-panel installation 1 NO + 1 NC HKF1-11 Auxiliary switches, lateral attechment at right MS 116 with mini contactor B6 1 NO + 1 NC HK1-11 2 NO HK1-20 2 NC HK1-02 Signal contakt for general "tripped" signal, lateral attachment at right 1 NO + 1 NC SK1-11 2 NO SK1-20 2 NC SK1-02 Undervoltage release, lateral attachment at left MS 116 with A-contactor 24 V, 50 Hz UA1-24 48 V, 50 Hz UA1-48 60 V, 50 Hz UA1-60 110/120 V, 50/60 Hz UA1-110 208 V, 60 Hz UA1-208 230 V, 50 Hz UA1-230 400 V, 50 Hz UA1-400 415 V, 50 Hz UA1-415 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/44 Manual Motor Starter MS116 Accessories Description Order code Phase buses for cross wiring MS 116, 63 A, 690 V for 2 devices without auxiliary switches PS1-2-0 for 3 devices without auxiliary switches PS1-3-0 for 4 devices without auxiliary switches PS1-4-0 for 5 devices without auxiliary switches PS1-5-0 for 2 devices with 1 auxiliary switch PS1-2-1 for 3 devices with 1 auxiliary switch PS1-3-1 for 4 devices with 1 auxiliary switch PS1-4-1 for 5 devices with 1 auxiliary switch PS1-5-1 for 2 devices with 2 auxiliary switches PS1-2-2 for 3 devices with 2 auxiliary switches PS1-3-2 for 4 devices with 2 auxiliary switches PS1-4-2 for 5 devices with 2 auxiliary switches PS1-5-2 Busbar cover BSI-3 Power infeed blocks, 63 A, 690 V, stranded 25 mm2, flexible 16 mm2 flat S1-M1 high S1-M2 Mounted enclosure IP 65, triple lockable in Off position, with N- und PE-terminal, metric cable gland Grey enclosure with black handle IB 116-G Yellow enclosure with red handle IB 116-Y Switch cubicle mounting kit IP 65, with axial extension triple lockable in Off position, locked in On position Twist knob black OHB2AJM Twist knob red/yellow OHY2AJM axis 85 mm OXS5X85 axis 105 mm OXS5X105 axis 130 mm OXS5X130 axis 180 mm OXS5X180 driver 1) MSMN driver spindle 32 mm MSOX 2) Locking device lock adapter SA1 locking device assy =(adaptor sai + padlock + 3 keys) SA3 For connecting links between MMS + contactor (see page x/xx) 1) For accommodating spindle and attachment to manual motor starter 2) Is screwed directly onto the manual motor starter Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/45 Manual Motor Starter MS 325 Selection Open design, enclosure IP 20, resistant to changeable climates. Quick fastening on mounting rails DIN EN 50 022, 35. Setting range A...A Weight kg Order code MS 325 - 0.16 MS 325 with thermal and electromagnetic trips, short-circuit-proof up to 100 kA, resp.50 kA 1) 2) 0.10....0.16 0.347 0.16....0.25 0.347 MS 325 - 0.25 0.25....0.40 0.347 MS 325 - 0.4 0.40....0.63 0.347 MS 325 - 0.63 0.63....1.00 0.347 MS 325 - 1 1.00....1.60 0.347 MS 325 - 1.6 1.60....2.50 0.347 MS 325 - 2.5 2.50....4.00 0.347 MS 325 - 4 4.00....6.30 0.347 MS 325 - 6.3 6.30....9.00 0.347 MS 325 - 9 9.00 ....12.50 0.347 MS 325 - 12.5 12.50....16.00 0.347 MS 325 - 16 16.00....20.00 0.347 MS 325 - 20 20.00....25.00 0.347 MS 325 - 25 Weight kg Order code Magnetic only versions on application Accessories Setting range Auxiliary switches, lateral attachment at left, max. 2 pieces attachable 1 NO + 1 NC 0.031 HK-11 2 NO 0.031 HK-20 2 NC 0.031 HK-02 Signal contact for general "tripped" signal, lateral attachment at the left max. 1 piece attachable 1 NO + 1 NC 0.031 SK-11 Locking device lock adapter locking device assy. (Adapter SA1 + padlock + 3 keys) 0.004 SA1 0.050 SA3 For other accessories please consult us. For connecting links beween MMS and contactor see page ?? Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/46 Manual Motor Starters MS 4xx Open design. enclosure IP 20, resistant to changeable climates. Quick fastening on mounting rails DIN EN 50 022, 35 mm without auxiliary switch Setting range A...A Weight kg Order code 11....16 0.96 MS 450 - 16 14....20 0.96 MS 450 - 20 18....25 0.96 MS 450 - 25 22....32 0.96 MS 450 - 32 28....40 0.96 MS 450 - 40 36....45 0.96 MS 450 - 45 40....50 0.96 MS 450 - 50 MS 450 with thermal and electromagnetic trips, tripping class 10, short-circuit-proof up to 50 kA MS 495 with thermal and electromagnetic trips, tripping class 10, short-circuit-proof up to 50 kA 28....40 2.1 MS 495 - 40 36....50 2.1 MS 495 - 50 45....63 2.1 MS 495 - 63 57....75 2.1 MS 495 - 75 70....90 2.1 MS 495 - 90 80....100 2) 2.1 MS 495 - 100 Weight kg Order code Magnetic only and heavy duty starving versions on application Retrofittable accessories These parts may be procured in addition to the MS 4xx. They must be mounted by the user. Type Auxiliary switches, for front panel installation 1 NO + 1NC 0.02 HK4-11 1 Changeover 0.02 HK4-W Auxiliary switches, for lateral attachment at left, max. 1 mountable 1 NO + 1 NC 0.03 HKS4-11 2 NO 0.03 HKS4-20 2 NC 0.03 HKS4-02 0.07 SK4-11 Pilot switch, for separate signalling of short-circuit and general tripping, lateral attachment at left, max. 1 mountable, also together with auxiliary switch for any signal 1 NO + 1 NC For other accessories please consult us. For connecting links beween MMS and contactor see page ?? Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/47 BEA 7 ... BEA 110 Connecting Links for Contactors and Manual Motor Starters Application The BEA... connecting link is used for direct linking between a contactor and the associated manual motor starter which are used together as DOL Starter Combination in type 1 or type 2 co-ordination, complying with IEC 60947-4-1 and EN 60947-4-1. Database of co-ordination tables on the ABB Website: www.abb.com/lowvoltage + left menu: "Low Voltage On-Line" + select: "Support Tools". Description The BEA... insulated 3-pole connecting link (touch safe) ensures the electrical linking between the contactor and the corresponding manual motor starter. The BEA... connecting links can be used with the A... series contactors (including AF..., AE... versions) and the MS... manual motor starter as indicated in the table below. BEA 16/116 For contactors & fixing BEA 40/450 For MMS & fixing Screws not Screws / rail supplied not supplied } } } B6, VB6A B7, VB7A B6, VB6A B7, VB7A - MS116 MS116 MS325 MS325 A9 A 12 A 16 A 26 A9 A 12 A 16 A 26 A 30 A 40 A 50 A 50 A 63 A 75 A 90 A 110 - - - 2 x M4 - - - 2 x M4 2 x M4 2 x M4 2 x M4 2 x M6 2 x M6 2 x M6 2 x M6 2 x M6 MS 116 MS 116 MS 116 MS 116 MS 325 MS 325 MS 325 MS 325 MS 450 MS 450 MS 450 MS 495 MS 495 MS 495 MS 495 MS 495 15 x 35 mm 15 x 35 mm 15 x 35 mm 2 x M5 2 x M5 2 x M5 2 x M5 2 x M5 2 x M5 2 x M5 2 x M5 Ie max. AC-3 400 V A Weight kg Order code 8 11 8 11 0.013 0.013 0.021 0.021 BEA7/116 BEA7/116 BEA7/325 BEA7/325 9 12 16 25 9 12 16 25 32 37 50 50 63 75 90 100 0.020 0.020 0.020 0.024 0.031 0.031 0.031 0.031 0.061 0.061 0.062 0.120 0.120 0.120 0.124 0.124 BEA 16/116 BEA 16/116 BEA 16/116 BEA 26/116 BEA 16/325 BEA 16/325 BEA 16/325 BEA 26/325 BEA 40/450 BEA 40/450 BEA 50/450 BEA 75/495 BEA 75/495 BEA 75/495 BEA 110/495 BEA 110/495 A 9-30-10 + BEA 16/116 + MS 116 DOL Starter Combination Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/48 FBP FieldBusPlug Communicative Motor Starters - Compact Devices Motorstarter Direct MSD11-FBP Motor Branch circuit for 1 motor, 1 direction of rotation, IP20. * Motor protection with thermal and electromagnetic trip * Compact device with fieldbus-independent interface for connection to FBP fieldbus connector * 400 V AC, max. 12 A, incl. motor connector, Ics = 10...50 kA Designation 0.16 A 0.25 A 0.40 A 0.63 A 1.0 A 1.6 A 2.5 A 4.0 A 6.3 A 10.0 A 12.0 A MSD11-FBP Setting Range 0.1 - 0.16 0.16 - 0.25 0.25 - 0.40 0.40 - 0.63 0.63 - 1.0 1.0 - 1.6 1.6 - 2.5 2.5 - 4.0 4.0 - 6.3 6.3 - 10 8 - 12.0 A A A A A A A A A A A Order Code MSD11-FBP.0.16 MSD11-FBP.0.25 MSD11-FBP.0.4 MSD11-FBP.0.63 MSD11-FBP.1 MSD11-FBP.1.6 MSD11-FBP.2.5 MSD11-FBP.4.0 MSD11-FBP.6.3 MSD11-FBP.10 MSD11-FBP.12 Motorstarter Direct MSR22-FBP Motor Branch circuit for 1 motor, 2 directions of rotation, IP20. * Motor protection with thermal and electromagnetic trip * Compact device with fieldbus-independent interface for connection to FBP fieldbus connector * 400 V AC, max. 12 A, incl. motor connector, Ics = 10...50 kA Designation 0.16 A 0.25 A 0.40 A 0.63 A 1.0 A 1.6 A 2.5 A 4.0 A 6.3 A 10.0 A 12.0 A Setting Range 0.1 - 0.16 0.16 - 0.25 0.25 - 0.40 0.40 - 0.63 0.63 - 1.0 1.0 - 1.6 1.6 - 2.5 2.5 - 4.0 4.0 - 6.3 6.3 - 10 8 - 12.0 A A A A A A A A A A A Order Code MSR22-FBP.0.16 MSR22-FBP.0.25 MSR22-FBP.0.4 MSR22-FBP.0.63 MSR22-FBP.1 MSR22-FBP.1.6 MSR22-FBP.2.5 MSR22-FBP.4.0 MSR22-FBP.6.3 MSR22-FBP.10 MSR22-FBP.12 Accessories for Motor Starters MSD11-FBP and MSR22-FBP MSR22-FBP Busbar blocks for MSD11-FBP and MSR22-FBP for cross wiring. Feeder block for busbar blocks MSD11-FBP and MSR22-FBP. * Current-carrying capacity max.63 A, connection cross-section 25/16mm2 multipole/fine-wire Designation Busbar block for 2 devices Busbar block for 3 devices Busbar block for 4 devices Busbar block for 5 devices Feeder block, flat design Feeder block, high Order Code PS1-2-0 PS1-3-0 PS1-4-0 PS1-5-0 S1-M1 S1-M2 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/49 FBP FieldBusPlug Communicative Motor Starters with Control Function Motorstarter Fieldbus Interface MFI21-FBP Fieldbus interface, IP20, for coupling to manual motor starter MS 325. * Integrated motor control functions - direct, reverse-start, star-delta starting, diagnostic functions * Integrated potentiometer, 3 digital inputs, 3 relay outputs, 1 direct-coupled digital input for detection of switch position of the MS 325 * Fieldbus-independent interface for connection to FBP fieldbus connector Designation Order Code Motorstarter Fieldbus Interface MFI21-FBP.0 *) Manual motor starter MS325 and accessories for MS 325, refer to main switch and technology catalogue MFI 21 Universal Motor Controller UMC22-FBP Universal motor controller with thermal overload protection 0.2-63A in a single device type. * Bushing-type current transformer, cable cross-section 25mm2 * Intergrated motor control functions - direct, reverse-start, star-delta starting, servo-drive functions * Diagnostic functions - overload, phase failure, trip - trip categories 10,20,30 * Integrated storage of parameters and motor data * 6 digital inputs, 3 relay outputs * Fieldbus-independent interface for connection to FBP fieldbus connector Designation Rated motor current Order Code Universal Motor Controller 0.2 - 63 UMC22-FBP.0 A UMC 22 Accessories for Universal Motor Controller UMC22-FBP Busbar blocks for MSD11-FBP and MSR22-FBP for cross wiring. Feeder block for busbar blocks MSD11-FBP and MSR22-FBP. * Current-carrying capacity max.63 A, connection cross-section 25/16mm2 multipole/fine-wire Designation Order Code Control Panel ACS100-PAN Display - UMC 22 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/50 FBP FieldBusPlug Communicative Motor Starters - Compact Devices (Please consult us for availability of other protocol's) AS-i FieldBusPlug Direct Ready-made AS-i Slave fieldbus interface with various cable lengths. * Applicable on the MSD11-FBP and on devices with max. 2 input signals and 1 output signal * Degree of protection IP65, diagnostic LED Designation FieldBusPlug AS-i Direct AS-i Direct AS-i Direct AS-i Direct Cable Length 0.25 0.50 1.00 5.00 Order Code m m m m ASD11-FBP.025 ASD11-FBP.050 ASD11-FBP.100 ASD11-FBP.500 Field Bus Plug Direct AS-i FieldBusPlug Performance Ready-made AS-i Slave fieldbus interface with various cable lengths. * Applicable on all FBP motor starters and devices with max. 4 input signals and 3 output signals * Degree of protection IP65, diagnostic LED Designation AS-i Performance AS-i Performance AS-i Performance AS-i Performance Cable Length 0.25 0.50 1.00 5.00 m m m m Order Code ASP22-FBP.025 ASP22-FBP.050 ASP22-FBP.100 ASP22-FBP.500 Field Bus Plug Performance Accessories for AS-i Bus Connection AS-i round cable for bus junctions Ready-made bus cable with an M12 connector and an open cable end. * Application on bus junctions such e.g. AS-i couplers or devices with an integrated AS-i interface Designation AS-i Round Cable with female connector AS-i Round Cable with male connector Cable Length 0.30 m Order Code ASF11-FBP.030 0.30 ASM11-FBP.030 m AS-i round cable for bus extension Ready-made bus cable with M12 male and female connectors ST04901 ST05001 Designation AS-i Extension Cable AS-i Extension Cable AS-i Extension Cable Cable Length 1.00 m 3.00 m 5.00 m Order Code ASX11-FBP.100 ASX11-FBP.300 ASX11-FBP.500 ST05101 AS-i round cable and accessories for bus extension Bus cable and coupling accessories ST05501 ST05701 Designation Cable Length AS-i Extension Cable 100 m AS-i Round Cable, male conn. AS-i Round Cable, female conn. AS-i Flat-Cable Branch Circuit with M12 socket Order Code ASC11-FBP.999 ASM11-FBP.0 ASF11-FBP.0 AST11-FBP.0 AS-i addressing device, power unit, miscellaneous accessories Designation AS-i Addr. Device, incl. plug-in power unit Power Unit PS 24V/5A, adjustable Address Signs for FieldBusPlug ST05601 Order Code ASA21-FBP.0 Systron PS24/5 CAL11-FBP.0 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/51 FBP FieldBusPlug DeviceNet Fieldbus Connectors and Accessories (Please consult us for availability of other protocol's) DeviceNet FieldBusPlug Ready-made DeviceNet fieldbus interface with various cable lengths. * Applicable on all FBP motor starters and other devices * Degree of protection IP65, diagnostic LED Designation FieldBusPlug DeviceNet DeviceNet DeviceNet DeviceNet Cable Length 0.25 0.50 1.00 5.00 Order Code m m m m DNP21-FBP.025 DNP21-FBP.050 DNP21-FBP.100 DNP21-FBP.500 B10 Accessories for the DeviceNet Bus Connector DeviceNet round cable for bus junctions Ready-made bus cable with an M12 connector and an open cable end. * Application on bus junctions such e.g. DeviceNet couplers or devices with an integrated DeviceNet interface ST05301 Designation DeviceNet Round Cable with female connector DeviceNet Round Cable with male connector ST05201 Cable Length 0.50 m Order Code DNF11-FBP.050 0.50 DNM11-FBP.050 m DeviceNet round cable for bus extension Ready-made bus cable with M12 male and female connectors Designation DeviceNet Extension Cable DeviceNet Extension Cable DeviceNet Extension Cable ST04801 Cable Length 1.00 m 3.00 m 5.00 m Order Code DNX11-FBP.100 DNX11-FBP.300 DNX11-FBP.500 DeviceNet round cable and accessories for bus extension Bus cable and coupling accessories ST05501 Designation Cable Length DeviceNet Extension Cable 100 m DeviceNet Round Cable, male conn. DeviceNet Round Cable, female conn. ST05701 Termination Resistor, Power Unit, Miscellaneous Accessories Designation DeviceNet Termination Resistor Power Unit PS 24V/5A, adjustable Extra Information 120 Ohm Order Code DNC11-FBP.999 DNM11-FBP.0 DNF11-FBP.0 Order Code DNR11-FBP.120 Systron PS24/5 ST05401 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/52 Notes Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/53 Softstarters Description Softstarters type PS S ABB's solid state starter range is used when it is important to have a smooth start-up of various types of motor drives. Instead of switching directly to full voltage the softstarter ensures a gradual voltage increase. PS S 03...PS S 25 is a compact solution for small motors. Mounting is on 35 mm DIN-rail. This small softstarter has a built-in bypass contact. PS S 18/30...PS S 300/515 for normal duty applications and connection both "In Line" and "Inside Delta" (compare the connection with a standard Y/D starter). The result of "Inside Delta" connection is a 42 % reduction of the current exposed to the softstarter. It will then be possible, for example, to start and run a 100 A motor using a 58 A softstarter. An optional "Current limit" function is available. Two signal relays are built in as standard. This softstarter has a service factor of 1.15, which means that the maximum operational current is Ie (rated current) x1.15. Example: the PS S 18/30 connected in-line has an Ie of 18 A. The maximum operational current is then 1.15 x 18 A = 20.7 A. In-line and inside-delta connection of PS S 18/30...300/515 The operator panels for PS S, PS D and PS DH have LEDs, potentiometers and switches for indication and settings. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/54 Softstarters General Technical Data PS S 03...PS S 25 and PS S 18/30...PS S 300/515 Rated insulation voltage Ui Rated operational coltage Ue Starting Capacity at max. Rated current Ie Number of starts per hour Overload capability Overload class Service factor PS S03...PS S 12 630 220 - 230 400 - 415 480 - 500 600 5 x Ie for 5 sec V V PS S 25 630 220 - 230 400 - 415 480 - 500 600 5 x Ie for 5 sec PS S 18/30...PS S 300/515 690 200 - 690 4 x Ie for 10 sec A % 62) 10 100 62) 10 100 305) 10 115 (PS S 18/30...250/430) 110 (PS S 300/515) C C -20 - +50 -40 - +70 -20 - +50 -40 - +70 -25 - +60 1) -40 - +70 Degree of protection Main circuit IP20 IP20 Supply and control circuit IP20 IP20 IP20 (PS S 18/30-500...44/76-500) IP10 (PSS 50/85-500...72/124-500) IP10 (PS S 18/30-690...75/124-690) IP00 (PS S 85/147...300/515) IP20 0.5 - 6.5 -+15% 0.5 - 8 -+25% 0 - 85 -+15% No 0.5 - 10 -+10% 0.5 - 20 -+10% 0.5 - 50 -+5% No 1 - 30 0 - 30 30 - 70 1.5 - 4 3) No No Yes V A No4) No - No4) No - Yes Yes 250 5 A - - 1.5 On Green Yellow Yellow - Green Yellow (flashing) Yellow Red - Green No Green Red Red Ambient temperature During operation During Storage Settings Ramp time during start Ramp time during stop Initial voltage during start Current limit voltage s s % xIe Switch for Inside delta connection ON/OFF Signal relay By-pass signal Fault signal Rated operational voltage Ue Rated thermal current Ith Rated operational current at AC-15 (Ue=250) Signal indication LED Ready to start/stand by Ramping up/down Completed start ramp General fault External fault T.O.R. F1 F2 1) Above 40C, up to max 60C, reduce the rated current with 0.8% per C. 2) When more than 6 starts per hour are required, contact your sales office. 3) Only if current transformer is connected (accessory). 4) The unit has built in by-pass contacts (AC-53b). 5) Valid for 50% on time and 50% off time. 3.5 x Ie for 7 sec., if other data is required, contact your sales office Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/55 Soft starters Soft starter PS S 03...25, PS S18/30...300/515 PS S 03...25 For normal starts Motor Rating 230 V 400 V Pe Pe kW kW Motor Rating 230 V Pe kW 400 V Pe kW Currrent Ie A - 1.1 - - 3 PS S 03-400B - 5.5 - - 12 PS S 12-400B - 11.0 - - 25 PS S 25-400B Order code Control Voltage 40-110V AC/DC, 110-440 VAC. PS S 18/30...142/245 For normal starts Inline Motor Rating 230 V 400 V Pe Pe kW kW 500 V Pe kW 690 V Pe kW 4 7.5 11 - 18 7.5 15 18.5 - 30 PS S 18/30-500 7.5 15 18.5 - 30 12.5 25 30 - 52 PS S 30/52-500 9 18.5 22 - 37 15 30 37 - 64 PS S 37/64-500 11 22 25 - 44 22 37 45 - 76 PS S 44/76-500 12.5 25 30 - 50 25 45 55 - 85 PS S 50/85-500 15 30 37 - 60 30 55 75 - 105 PS S 60/105-500 18.5 37 45 - 72 37 59 80 - 124 PS S 72/124-500 22 45 55 - 85 40 75 90 - 147 PS S 85/147-500 30 55 75 - 105 55 90 110 - 181 PS S 105/181-500 37 75 90 - 142 75 132 160 - 245 PS S 142/245-500 45 90 110 - 175 90 160 200 - 300 PS S 175/300-500 75 132 160 - 250 132 220 295 - 430 PS S 250/430-500 90 160 200 - 300 160 257 355 - 515 PS S 300/515-500 Currrent Ie A Inside Delta Motor Rating 230 V 400V 500V Pe Pe Pe kW kW kW 690V Pe kW Current Ie A Order code Code letter for supply voltage is F = 110-120V, 50/60Hz; L = 220-240V 50/60Hz Code letter dor fault fignal relay is Blank = NO; C = NC Note: For heavy duty starting and 690V applications. Please Consult Us. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/56 Soft starters Accessories PS S 18/3...300/515 Current transformer for current limit function To be connected to terminals 11 and 12 on the soft starter. The setting range (1.5 - 4) corresponds to a multiple of the transformer ratio. Technical data below shows transformer ratio and number of turns for the primary winding. Current Transformer 60/1 - 2 turns 40/1 - 1 turn 50/1 - 1 turn 60/1 - 1 turn 75/1 - 1 turn 75/1 - 1 turn 100/1 - 1 turn 125/1 - 1 turn 150/1 - 1 turn 200/1 - 1 turn 250/1 - 1 turn 400/1 - 1 turn 400/1 - 1 turn For softstarter PS S 18/30 PS S 30/52 PS S 37/64 PS S 44/76 PS S 50/85 PS S 60/105 PS S 72/124 PS S 85/147 PS S 105/181 PS S 142/245 PS S 175/300 PS S 250/430 PS S 300/515 Weight kg 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Order Code PS CT-60 PS CT-40 PS CT-50 PS CT-60 PS CT-75 PS CT-75 PS CT-100 PS CT-125 PS CT-150 PS CT-200 PS CT-250 PS CT-400 PS CT-400 Weight kg 0.2 0.3 0.4 Order Code Cable connectors for Cu cables (set of 3) Wire range 6-185 mm2 2x(50-1210) mm2 16-240 mm2 Tightening torque max. Nm 16 16 25 For softstarter PS S 85/147...142/245 PS S 85/147...142/245 PS S 175/300...300/515 1SDA023354R1 LZ 185-2C/120 1SDA023368R1 Cable connectors for AI and Cu cables (set of 3) Wire range 35-95 mm2 25-150 mm2 120-240 mm2 Tightening torque 13.35 31 43 For softstarter PS S 85/147...142/245 PS S 85/147...142/245 PS S 175/300...300/515 Weight kg 0.1 0.1 0.1 Order Code 1SDA023356R1 1SDA023357R1 1SDA023379R1 Weight kg 0.1 0.1 0.2 0.2 Order Code LT 185-AC LT 185-AL LT 300-AC LT 300-AL Weight kg 0.2 0.3 Order Code LE 185 LE 300 Weight kg 0.1 0.15 0.25 0.4 Order Code PS LW-44 PS LW-72 LW 185 LW-300 Terminal shrouds (set of 2) For cable connectors For compression lugs For cable connectors For compression lugs For softstarter PS S 85/147...142/245 PS S 85/147...142/245 PS S 175/300...300/515 PS S 175/300...300/515 Terminal nut washer (set of 2) For softstarter PS S 85/147...142/245 PS S 175/300...300/515 Terminal shrouds (set of 2) For softstarter PS S 18/30...44/76 PS S 50/85...72/124 PS S 85/147...142/245 PS S 175/300...300/515 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/57 Pilot Devices, Compact Range non-illuminated The compact range is a new competitive choice for OEM customers and Panel Builders with high requirements of cost efficient, easy to use and reliable products. Features * Reliable performance * Less stock-keeping * "All-in-one function" One Order Code = one complete function * Robust design * Easy mounting Part of the ABB Family The compact range can easily be combined with our modular Pilot Devices as they have the same front design. Worldwide availability ABB is represented in over 130 countries. Our pilot devices meet all major international and national standards. Technical advantages * High degree of protection * One or two built-in electrically separated contacts (1NO, 1NC, 2NO, 2NC or 1NC + 1NO) * Contacts with wiping action * Low built-in depth Same front design for both the modular and the compact range. Robust actuators in clear colors with large text and push area. 42 mm Samples of accessories Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/58 Pilot Devices Compact Range Pushbuttons, Non-Illuminated Contacts Included No NC Momentary Flush button *Maintained Flush button Momentary Extended button *Maintained Extended button 1 - CP1-10 -10 CP2-10 -10 CP3-10 -10 CP4-10 -10 2 - CP1-10 -20 CP2-10 -20 CP3-10 -20 CP4-10 -20 - 1 CP1-10 -01 CP2-10 -01 CP3-10 -01 CP4-10 -01 - 2 CP1-10 -02 CP2-10 -02 CP3-10 -02 CP4-10 -02 1 1 CP1-10 -11 CP2-10 -11 CP3-10 -11 CP4-10 -11 chrome bezel available on request Colour Code Letter Red R Ordering Example Green G Requested: A compact pushbutton, momentary, with red Yellow Y extended button and one NO contact. Blue L Order: 1 piece of CP3-10R-10 White W Black B Grey U Contacts Included Momentary Flush button, white *Maintained Extended button, black With black I with black II with white 0 1 - CP1-110W-10 CP1-210W-10 - - 1 - - CP3-310B-01 Chrome Bezel available on request *Maintained available Sept 2003 onwards Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/59 Pilot Devices, Compact Range Selector switches, non-Illuminated B C A B C C Two Position Contacts Included No NC Maintained Maintained Momentary 1 - C2SS1-10 -10 C2SS2-10 -10 C2SS3-10 -10 2 - C2SS1-10 -20 C2SS2-10 -20 C2SS3-10 -20 C2SS3-10 -01 - 1 C2SS1-10 -01 C2SS2-10 -01 - 2 C2SS1-10 -02 C2SS2-10 -02 C2SS3-10 -02 1 1 C2SS1-10 -11 C2SS2-10 -11 C2SS3-10 -11 chrome bezel available on request Colour Code Letter Red R Black B Grey U A B A C B C A B A C B C Three Position Contacts Included NO NC Maintained Momentary Momentary Momentary 2 - C3SS1-10 -20 C3SS2-10 -20 C3SS3-10 -20 C3SS7-10 -20 - 2 C3SS1-10 -02 C3SS2-10 -02 C3SS3-10 -02 C3SS7-10 -02 1 1 C3SS1-10 -11 C3SS2-10 -11 C3SS3-10 -11 C3SS7-10 -11 Ordering Example Requested: A red compact selector switch with three positions, Momentary, spring return from A to B and maintained position in C. With 2 NC contacts. Order: 1 piece of C3SS7-10R-02 Pilot Lights (max. 250V 3W) Pilot light BA 9s base Colour Order Code Red CL-100R Green CL-100G Yellow CL-100Y Blue CL-100L White CL-100W Clear CL-100C Direct supply. Max. 250V 3W. Use filament bulb for best light. Alight diffusing lens is recommended for use with LED and neon bulbs. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/60 Pilot Devices, Compact Range Technical data Technical Data Drilling Plan - for pushbuttons, switches and pilot lights Standards IEC 73, 529, 947-5-1, 947-5-5 EN 50 013, 60 947-5-1 UL 508 CSA C22.2 No. 14 Degree of protection Operators Compact pushbutton IP66 Compact pilot lights IP66 Compact selector switch IP66 Electrical functions Terminals IP20 Dimensions - Compact Pushbutton Mechanical life Pushbuttons 0.5 million operations Selector switches 0.5 million operations Temperature Ambient temperature during operation -25 to +70 C Storage temperature -30 to +85 C Flush button Terminals Plus-minus Pozidrive Size 2 Connectable area min. 1 x 0.5mm2 max. 2 x 1.5mm2/ 2 x AWG14 Extended button Contacts Ratings as per UL, CSA, NEMA C300, R300 Rated insulation voltage Rated thermal current Rated operational current at Compact Selector Switch 250 V 2.5 A 120 V 1.5 A 240 V 0.75 A Ratings as per IEC 947-5-1 Rated insulation voltage 300 V Rated thermal current, Ith 5A Rated operational current Ie Utilization category AC 15, at Utilization category DC 13, at Compact Pilot Light 120 V 1.5 A 240 V 1A 24 V 0.3 A 125 V 0.2 A Short circuit protection Max. fuse at 1 kA 16 A ordinary 10 A delayed Pilot light max. 3W, 240 V Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/61 Pushbutton & pilot devices CBK 22mm Standard & Illuminated Pushbuttons Description Bezel Type Order Code Flush button momentary Non-illuminated chrome plastic chrome CBK-CP* CBK-MP* Extended button momentary Non-illuminated chrome plastic chrome CBK-CPE* CBK-MPE* Flush button maintained Non-illuminated chrome plastic chrome CBK-CPP* CBK-MPP* Extended button maintained Non-illuminated chrome plastic chrome CBK-CPPE* CBK-MPPE* Full voltage -extended momentary illuminated pushbutton c/w lamp block & lamp chrome plastic chrome CBK-CPIF CBK-MPIF * * Resistor -extended momentary illuminated pushbutton c/w lamp block & lamp chrome plastic chrome CBK-CPIR CBK-MPIR * * Transformer -extended momentary illuminated pushbutton chrome plastic chrome CBK-CPIT CBK-MPIT * * Full voltage -extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBK-CPPIF CBK-MPPIF * * Resistor - extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBK-CPPIR CBK-MPPIR * * Transformer-extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBKCPPIT CBK-MPPIT * * Full voltage-extended momentary illuminated pushbutton chrome plastic chrome CBK-CPIFL8 CBK-MPIFL8 * * Resistor-extended momentary illuminated pushbutton chrome plastic chrome CBK-CPIRL1 CBK-MPIRL1 * * Transformer-extended momentary illuminated pushbutton chrome plastic chrome CBK-CPITL CBK-MPITL * * Full voltage -extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBK-CPPIFL8 * CBK-MPPIFL8 * Resistor-extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBK-CPPIRL1 * CBK-MPPIRL1 * Transformer-extended maintained illuminated pushbutton (push-push) chrome plastic chrome CBK-CPPITL CBK-MPPITL Momentary Flush Maintained (push on push off) Extended Momentary Maintained (push on push off) Momentary (LED) Maintained (LED) (push on push off) * * Note: Black plastic bezels available on request Colour Code R = Red G = Green Y = Yellow L = Blue B = Black 1) W = White 2) C = Clear 2) 1) Only available for non-illuminated pushbuttons 2) Not available for LED lamps Voltages see page xx Colour Code - Replace * with colour Contact Blocks see page xx ORDER EXAMPLE: CBK-CPIF 6R (illuminated pushbutton c/w lamp block & lamp - 6v Direct -Red) Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/62 Pushbutton & pilot devices CBK 22mm Emergency Stop (complies with EN 60947-55) Description Order Code 40mm Emergency Stop twist to release pull to release momentary KPMT3-20R KPMP3-20R KPM1-20R 60mm Emergency Stop twist to release pull to release momentary KPMT4-20R KPMP4-20R KPM2-20 40mm illuminated Emergency Stop twist to release pull to release momentary KPMT3-21R KPMP3-21R KPM1-21R 60mm illuminated Emergency Stop twist to release pull to release momentary KPMT4-21R KPMP4-21R KPM2-21R Mushroom and Doubleheaded Pushbuttons. 30mm Mushroom pushbutton twist to release push pull momentary CBK-PMT3R CBK-PMP3R CBK-PM3R Mushroom lockable pushbutton 40mm maintained (red only) 45mm maintained (red only) CBK-PMK40R CBK-PMKR Double pushbutton momentary (start stop) momentary (blank) CBK-2P1C CBK-2P4C * * * *Standard actuator colour is RED if BLACK is required replace R with B Eg. CBK-PM3B = 30mm mushroom in black Contact Blocks see page xx Lamp Blocks see page xx www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Return to main index Facsimile 02476 368401 2/63 Pushbutton & pilot devices CBK 22mm Selector switches non-illuminated 2 Position B B A B A A A A A A A C C B 3 Position C C C C B B B B B B C C C C C C Description Bezel Type Order Code Non-illuminated 2 pos. short selector switches maintained (B&C) chrome plastic chrome CBK-C2BMK * CBK-M2BMK * Non-illuminated 2 pos. short selector switches spring return (C to B) chrome plastic chrome CBK-C2BSK CBK-M2BSK Non-illuminated 2 pos. short selector switches maintained (A&C) chrome plastic chrome CBK-C2AMK * CBK-M2AMK * Non-illuminated 2 pos. long selector switches maintained (B&C) chrome plastic chrome CBK-C2BML * CBK-M2BML * Non-illuminated 2 pos. long selector switches spring return (C to B) chrome plastic chrome CBK-C2BSL CBK-M2BSL * * Non-illuminated 2 pos. long selector switches maintained (A&C) chrome plastic chrome CBK-C2AML CBK-M2AML * * Non-illuminated 3 pos. short selector switches maintained (A,B&C) chrome plastic chrome CBK-C3MK CBK-M3MK * * Non-illuminated 3 pos. short selector switches spring return (A&C to B) chrome plastic chrome CBK-C3SK CBK-M3SK * * * * Non-illuminated 3 pos. short selector switches spring return (C to B) maintained (A) chrome plastic CBK-C3SRK * chrome CBK-M3SRK * Non-illuminated 3 pos. long selector switches maintained (A,B&C) chrome plastic chrome CBK-C3ML CBK-M3ML * * Non-illuminated 3 pos. long selector switches spring return (A&C to B) chrome plastic chrome CBK-C3SL CBK-M3SL * * Non-illuminated 3 pos. long selector switches spring return (C to B) maintained (A) chrome plastic chrome CBK-C3SRL CBK-M3SRL * * Note: Black plastic bezels available on request Contact Blocks see page xx Standard actuator colour is BLACK if other colours are required replace * R = RED G = GREY Eg. CBK-C2BMKR = 2 pos switch in red Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/64 Pushbutton & pilot devices CBK 22mm Selector switches illuminatec (translucent actuator) 2 Position B B A B A A A A A A A C C B 3 Position C C C C B B B B B B C C C C C C Description Bezel Type Order Code Illuminated 2 pos. short selector switches maintained (B&C) chrome plastic chrome CBK-C2BMKI * CBK-M2BMKI * Illuminated 2 pos. short selector switches spring return (C to B) chrome plastic chrome CBK-C2BSKI * CBK-M2BSKI * Illuminated 2 pos. short selector switches maintained (A&C) chrome plastic chrome CBK-C2AMKI * CBK-M2AMKI * Illuminated 2 pos. long selector switches maintained (B&C) chrome plastic chrome CBK-C2BMLI * CBK-M2BMLI * Illuminated 2 pos. long selector switches spring return (C to B) chrome plastic chrome CBK-C2BSLI CBK-M2BSLI Illuminated 2 pos. long selector switches maintained (A&C) chrome plastic chrome CBK-C2AMLI * CBK-M2AMLI * Illuminated 3 pos. short selector switches fixed (A,B&C) chrome plastic chrome CBK-C3MKI CBK-M3MKI * * Illuminated 3 pos. short selector switches spring return (A&C to B) chrome plastic chrome CBK-C3SKI CBK-M3SKI * * Illuminated 3 pos. short selector switches spring return (C to B) maintained (A) chrome plastic chrome CBK-C3SRKI * CBK-M3SRKI * Illuminated 3 pos. long selector switches maintained (A,B&C) chrome plastic chrome CBK-C3MLI CBK-M3MLI * * Illuminated 3 pos. long selector switches spring return (A&C to B) chrome plastic chrome CBK-C3SLI CBK-M3SLI * * Illuminated 3 pos. long selector switches spring return (C to B) maintained (A) chrome plastic chrome CBK-C3SRLI CBK-M3SRLI * * Contact Blocks see page xx Lamp Blocks see page xx www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Colour Code - Replace * with colour R = Red G = Green Y = Yellow L = Blue Telephone 02476 368551 * * Return to main index Facsimile 02476 368401 2/65 Pushbutton & pilot devices CBK 22mm Key operated selector switches 2 Position B B B 3 Position A A A A A B B B B B C Description Bezel Type Order Code Key operated 2 pos. selector switches maintained, key removable all pos. chrome CBK-S2KM4 Maintained, key removable (B) chrome CBK-S2KM1 Momentary, key removable (B) chrome CBK-S2KS1 Key operated 3 pos. selector switches maintained, key removable all pos. chrome CBK-S3KM4 Momentary, key removable all pos. spring ret. from (A & C to B) chrome CBK-S3KS4 Maintained, key removable (B) chrome CBK-S3KM2 Momentary, key removable (B) spring ret. from (A&C to B) chrome CBK-S3KS2 Momentary, key removable (A) spring ret. from (C to B) chrome CBK-S3KSR1 Key operated maintained pushbutton, locks when depressed release via key. Key removable both positions. chrome CBK-PKM1 C C C C C C C Contact Blocks see page 2/69 N.B. Different keys are available for the selector switches on request The standard unit has key Type 71. For key Type 72 add a "2" at the end of the reference or for key Type 73 add a "3". Eg. CBK-S2KM1 CBK-S2KM12 CBK-S2KM13 Key 71. Key 72. Key 73. Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/66 Pushbutton & pilot devices CBK 22mm Pilot Lights Lamp Holder Lamp Holder+ Resistor Lamp Holder + Transformer Voltage Description Order Code 6V lamp & lamp block CBK-KLF6 * 12V lamp & lamp block CBK-KLF7 * 24V lamp & lamp block CBK-KLF8 * 48V lamp & lamp block CBK-KLF9 * 120V lamp & lamp block CBK-KLF1 * 110/60V lamp, lamp block & resistor CBK-KLR1 * 240/120V lamp, lamp block & resistor CBK-KLR2 * 110/6V lamp, lamp block & transformer CBK-KLT1 * 240/6V lamp, lamp block & transformer CBK-KLT2 * 415/6V lamp, lamp block & transformer CBK-KLT3 * 480/6V lamp, lamp block & transformer CBK-KLT4 * 24V LED lamp & lamp block CBK-KLFL8 * 110/24V LED lamp, lamp block & resistor CBK-KLRL1 * 110/24V LED lamp, lamp block & transformer CBK-KLTL1 * * 240/24V LED lamp, lamp block & transformer CBK-KLTL2 415/24V LED lamp, lamp block & transformer CBK-KLTL3 * 480/24V LED lamp, lamp block & transformer CBK-KLTL4 * Colour Code Replace * with colour code R = Red G = Green Y = Yellow L = Blue W = White 1) C = Clear1) 1) Not available for LED lamps Lamps Filament Neon LED Description Order Code 6V filiment CBK-LB6 12V filiment CBK-LB12 24V filiment CBK-LB24 30V filiment CBK-LB30 48V filiment CBK-LB48 60V filiment CBK-LB60 130V filiment CBK-LB1 220V neon (AC only) CBK-LBN2 24V Red LED CBK-LBD8R 24V Green LED CBK-LBD8G 24V Yellow LED CBK-LBD8Y 24V Blue LED CBK-LBD8L 24V Red Flashing LED CBK-LBDRF 24V Green Flashing LED CBK-LBDGF 24V Yellow Flashing LED CBK-LBDYF Other voltages on request Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/67 Pushbutton & pilot devices CBK 22mm Pilot light front mounted accessories Description Resistor CBK-LMF 110V/60V resistor type CBK-LMR1 240V/120V resistor type CBK-LMR2 24V CBK-LMR24 1) resistor type 110V/24V Lamp Holder + Transformer Order Code Full Voltage (maximum 240v) 2) resistor type CBK-LMLED 110/6V lamp holder + transformer CBK-LMT1 240/6V lamp holder + transformer CBK-LMT2 415/6V lamp holder + transformer CBK-LMT3 480/6V lamp holder + transformer CBK-LMT4 110/24V 2) lamp holder + transformer CBK-LMT124 240/24V 2) lamp holder + transformer CBK-LMT224 415/24V 2) lamp holder + transformer CBK-LMT324 480/24V 2) lamp holder + transformer CBK-LMT424 110/6V transformer CBK-LT1 240/6V transformer CBK-LT2 415/6V transformer CBK-LT3 480/6V transformer CBK-LT4 2) Transformer 110/24V transformer CBK-LT124 240/24V 2) transformer CBK-LT224 415/24V 2) transformer CBK-LT324 480/24V 2) transformer CBK-LT424 250V . 1A for use with lamps connected to a common lamp test pushbutton CBK-CBD Lamp blocks base mounted accessories Diode Block Description Order Code Full Voltage (maximum 240v) CBK-LMFB 110V/60V resistor type CBK-LMRB1 240V/120V resistor type CBK-LMRB2 24V 1) resistor type CBK-LMRB24 120V/24V 2) resistor type 1) Designed for electronic circuits CBK-LMRLED 2) Designed for LED 24V lamps Resistor Type Pilot Heads Colour Order Code Red CBK-KAL R Green CBK-KAL G Yellow CBK-KAL Y Blue CBK-KAL L White CBK-KAL W Clear CBK-KAL C Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/68 Pushbutton & pilot devices CBK 22mm Contact blocks Actuator Mounted Blocks Base Mounted Blocks Description Type Contact Order Code Contact blocks are colour coded to easlly identify the contact configuration. GREEN = N/O RED = N/C Standard 1 N/O 1 N/C CBK-CB10 CBK-CB01 Contact blocks are colour coded to easlly identify the contact configuration. GREEN = N/O RED = N/C Gold Plated Low Energy Contacts 1 N/O 1 N/C CBK-CB10G CBK-CB01G 2 N/O 2 N/C 1 N/O + 1 N/C CBK-CB20 CBK-CB02 CBK-CB11 Double contact block for use with 5 block holder (i.e. outer positions) and 3 block holder for selector switches when centre position is required Contact Block (rear mounted) Rear Mounted Blocks Contact Block Holders Contact blocks are colour coded to easlly identify the contact configuration. GREEN = N/O RED = N/C Standard 1 N/O 1 N/C CBK-CBR10 CBK-CBR01 Contact blocks are colour coded to easlly identify the contact configuration. GREEN = N/O RED = N/C Gold Plated Low Energy Contacts 1 N/O 1 N/C CBK-CBR10G CBK-CBR01G 2 N/O 2 N/C 1 N/O + 1 N/C CBK-CB20B CBK-CB02B CBK-CB11B Double contact block for use when 5 contacts are required (i.e. outer positions) and selector switches when centre position is required 3 contact block holder CBK-CH 5 contact block holder CBK-H5 Safety holder for Emergency Stop (3 contact block holder) KCBHS-00 The safety holder can only be used on Emergency Stop Pushbuttons Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/69 Pushbutton & pilot devices Accessories Accessories Protective Membrane Of transparent, heat and cold resistant rubber. Does not harden at low temperature. Gives IP 67 degrees of protection. When membrane is used, remove the gasket. For operator with Weight (kg) Order Code Flush button 0.002 CBK-KXB Extended button 0.002 CBK-KXBE Double Pushbutton 0.004 CBK-XB2 Mounting Tool Used for tightening the nut of the attachment device. 0.100 1SFA616920R8015 30mm Adapters For use when fitting the 22mm pilot devices in 30mm mounting holes. (1.5mm - 4mm panels) For use with 22mm Compact Pilot Light Black Plastic 0.010 1SFA616920R8029 Metal 0.035 1SFA616920R8030 Lamp changing tool Designed for two different lamp diameters. The larger diameter fits filament bulbs and LEDS and the smaller diameter fits neon bulbs. Lamp changing tool 0.002 KA1-8072 Legend Plates Engraved fixed plates with symbol/text Symbol / text For Push button Legend plate material Off Silver-grey aluminium On Silver-grey aluminium Start Silver-grey aluminium Stop Silver-grey aluminium Weight 0.002 0.002 0.002 0.002 Order Code CBK-NPE10 CBK-NPE11 CBK-NPE19 CBK-NPE20 Symbol / text for two-position selector switch Centre Right Hand Auto Off On Stop Start Legend plate material Silver-grey aluminium Silver-grey aluminium Silver-grey aluminium Weight 0.002 0.002 0.002 Order Code CBK-NPE22 CBK-NPE24 CBK-NPE25 Symbol / text for three-position selector switch Left Centre Right Legend plate material Hand O Auto Silver-grey aluminium Slow Off Fast Silver-grey aluminium Weight 0.002 0.002 Order Code CBK-NPE26 CBK-NPE27 Blank - Aluminium (1-2 line) Blank - Aluminium (2-3 line) Blank - Plastic (1-2 line) Blank - Plastic (2-3 line) Emergency Stop (70mm) CBK-NPE28 CBK-NPE29 CBK-NPE28P CBK-NPE29P CBK-NPE30 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/70 Pushbutton & pilot devices Accessories Pushbutton stations non-metallic IP 54/65 Description Order Code 1 Element enclosure IP65 CBK-EP1 2 Element enclosure IP65 CBK-EP2 3 Element enclosure IP65 CBK-EP3 4 Element enclosure IP65 CBK-EP4 6 Element enclosure IP65 CBK-EP6 1 Element yellow enclosure (only) IP65 CBK-EPY 1 Element complete emergency stop station IP54 c/w twist to release mushroom headed button with 2 n/c contacts CBK-EP1ES40R Metallic enclosures available on request Voltage Selection Chart Filament / Neon Voltage V Full Voltage 6 6 12 7 24 8 48 9 110 1 LED Resistor 110/60 1 240/110 2 Transformer 110/6 1 240/6 2 415/6 3 480/6 4 Full Voltage Resistor 8 1 Transformer 110/24 1 240/24 2 415/24 3 480/24 4 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/71 Switching power supplies CP Range The switching power supplies CP offer many advantages in comparison to conventional supplies: * DIN-rail mount compact modules * Constant output voltage with good regulation * Low weight * cULus listet, UL 1604 class I, Div 2 * High efficiency * EN 50178 (VDE 0160) * Low Heating * Short-circuit and overload proof * Wide range of supply voltage * Fused input Type Supply Voltage Output Voltage Weight Order Code CP-5/3.0 90 - 260V AC/ 105 - 260V DC 5VDC/3A 0.220 1SVR423418R3000 Frequency, AC input: 47 - 400Hz Output load hold time: 10ms at 100% load Input current at nominal load: 0.4A(90V AC) / 0.2A (260V AC) Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 7.5A 3.0A(T) 5V DC 3% 3A Type Supply Voltage Output Voltage Weight Order Code CP-6/3.0 90-260VAC/ 105-260VDC 6VDC/3A 0.220 1SVR423418R4000 CP-5/3.0 Frequency, AC input: 47 - 400Hz Output load hold time: 10ms at 100% load Input current at nominal load: 0.5A(90V AC) / 0.25A (260V AC) Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 7.5A 3.0A(T) 6V DC 3% 3A Type Supply Voltage Output Voltage Weight Order Code CP-12/2.0 90-260VAC/ 105-260VDC 12VDC/2A 0.220 1SVR423418R1000 Frequency, AC input: 47 - 400Hz Output load hold time: 10ms at 100% load Input current at nominal load: 0.6A (90V AC) / 0.27A (260V AC) Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 7.5A 3.0A(T) 12V DC 3% 2A Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-12/2.0 adj 90-260VAC/ 105-260V DC 12VDC/2A 0.220 1SVR423418R1100 Frequency, AC input: 47 - 400Hz Output load hold time: 10ms at 100% load Input current at nominal load: 0.7A(90V AC) / 0.3A (260V AC) 33A 3.0A(T) 12V DC 3% 2A / 48W Type Supply Voltage Output Voltage Weight Order Code CP-24/0.3 adj 90-260VAC/ 105-260V DC 12VDC/2A 0.220 1SVR423418R1100 Frequency, AC input: 47 - 400Hz Output load hold time: 10ms at 100% load Input current at nominal load: 0.2A(90V AC) / 0.1A (260V AC) CP-24/0.3 Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 7.5A 3.0A(T) 24V DC 3% 0.3A Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/72 Switching power supplies CP Range Type Supply Voltage Output Voltage Weight Order Code CP-24/0.5 90 - 260V AC/ 105 - 260V DC 24V DC/0.5A 0.220 1SVR423414R0000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Type Supply Voltage Output Voltage Weight Order Code CP-24/1.0 90 - 260V AC/ 105 - 260V DC 24V DC/1A 0.220 1SVR423418R0000 Frequency, AC input: Output load hold time: Input current at nominal load: CP-24/0.5 47 - 440Hz 10ms at 100% load 0.3A (90V AC) / 0.15A (230VAC) 33A 3.0A(T) 24V DC 3% 0.5A / 7.2W Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 47 - 440Hz 10ms at 100% load max. 0.58A (90V AC) typ. 0.45A (115VAC) typ. 0.27A (230VAC) 7.5A (260V) 3.0A(T) 24V DC 3% 1A Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-24/1.5adj 90 - 260V AC/ 105 - 260V DC 24V DC/1.5A 0.220 1SVR423418R5000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 47 - 440Hz 20ms at 100% load max. 0.8A (90VAC) typ. 0.7A (117VAC) typ. 0.39A (230VAC) 33A 3.0A(T) 24V DC 3% 1.5A / 36W Type Supply Voltage Output Voltage Weight Order Code CP-24/2.0 90 - 140V AC 24VDC/2A 0.300 1SVR423417R0000 CP-24/2.0 140V - 260V AC/ 160 - 260V DC 24VDC/2A 0.300 1SVR423417R1000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 47 - 63Hz (90 - 140VAC) 47 - 440Hz (140-260VAC / 160-260VAC) 10ms at 100% load max 1.0A (90V AC) / max. 0.8A (140VAC) typ. 0.9A (230VAC typ. 0.45A (230VAC) 23A (140VAC / 9A (260VAC) 3.0A(T) 24V DC 3% 2A / 48W Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/73 Switching power supplies CP Range Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-24/2.0adj 140 - 260V AC/ 160 - 260V DC 24V DC/2A 0.280 1SVR423417R1100 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: 47 - 440Hz 10ms at 100% load max. 1.5A (90V AC) typ. 1.1A (115V AC) typ. 0.52A(230VAC) 40A (260V) 2.0A(T) 24V DC 3% 2A / 48W CP-24/2.0 adj Type Supply Voltage Output Voltage Weight Order Code CP-24/4.2 90 - 260V AC/ 127 - 260V DC 24V DC/4.2A 0.580 1SVR423416R1000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current at T 55C: CP-24/4.2 47 - 63Hz 20ms at 100% load max. 1.5A (90V AC) typ. 1.1A (115VAC) typ. 0.52A (230VAC) 40A (260V) 2.0A(T) 24V DC 3% Vin 90-260VAC - 4.2A / V in 127-260VAC - 4.2A Type Supply Voltage Output Voltage Weight Order Code CP-24/5.0 90 - 260V AC/ 127 - 260V DC 24VDC/5.0A 0.580 1SVR423416R0000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Vin > 45C 47 - 63Hz 10ms at 100% load max. 1.8A (90VAC) typ. 1.3A (115VAC) typ. 0.63A (230VAC) 40A (260V) 2.0A(T) 24V DC 3% T 40C T > 40C T = 55C 5A - 0.054A/C 4.2A Vin < 90VDC or < 140VAC 5A - 0.054A/C 4.2A Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-24/5.0 adj 90V - 260V AC/ 127 - 260V DC 24VDC/5A 0.580 1SVR423416R0100 Frequency, AC input: Output load hold time: Input current at nominal load: CP-24/5.0 adj Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Vin > 45C 47 - 63Hz 10ms at 100% load max 1.8A (90V AC) typ. 1.3A (115VAC typ. 0.63A (230VAC) 40A (260V) 2.0A(T) 24VDC 3% (23-28VDC adjustable with poti., max. 120W) T 40C T > 40C T = 55C 5A/120W - 1.33W/C 4.2A/100W Vin < 90VDC or < 140VAC 5A/120W - 1.33W/C 4.2A/100W Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/74 Switching power supplies CP Range Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-24/10 adj 93 - 132VAC/ 187 - 264V DC 24V DC/10A 1.050 1SVR432415R0000 Frequency, AC input: Output load hold time: Input current at nominal load: CP-24/10 adj Inrush current 25C ( 1ms): Internal input fuse: Output voltage: Output current: Vin 93 - 132VAC 47 - 63Hz 20ms at 100% load max. 4.3A (93VAC) typ. 3.5A (115VAC) typ. 1.7A (230VAC) max. 69A (230V) 4.0A(T) 24V DC 1% (24 - 28VDCadjustable with a screwdriver) T 60C T > 60C T = 70C 10A - 2%/C 8A Vin 187 - 264VDC 10A - 2%/C 8A Redundant module Type Input current Output current Weight Order Code CP-RUD 5A max. 5A max. 0.150 1SVR423418R9000 Monitors two CP range power supplies up to 5A current each. If one power supply fails the CP-RUD automatically switches to the alternative supply without interruption of the load current. Max. voltage 40V. Adjustable output voltage Type Supply Voltage Output Voltage Weight Order Code CP-24/20 adj 93 - 123VAC/ 187 - 264VAC 24V DC/20A 2.200 1SVR423415R1000 Frequency, AC input: Output load hold time: Input current at nominal load: Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Vin 93 - 132VAC Vin 187 - 264VDC CP-24/20 adj Type Supply Voltage Output Voltage Weight Order Code CP-48/.07 90 - 260V AC/ 105 - 260V DC 48V DC/0.7A 0.300 1SVR423418R6000 Frequency, AC input: Output load hold time: Input current at nominal load: CP-48/.07 47 - 63Hz 15ms at 100% load max. 8.9A (93VAC) typ. 7.2A (115VAC) typ. 3.5A (230VAC) max. 65A (230V) 10A(T) 24VDC 1% (28 - 24VDC adjustable with screwdriver) T 60C T 60C T = 70C 20A - 2%/C 16A 20A - 2%/C 16A Inrush current 25C ( 2ms): Internal input fuse: Output voltage: Output current: Tu > 45C 47 - 440Hz 10ms at 100% load max 0.8A (90V AC) typ. 0.7A (115VAC) typ. 0.35A (230VAC) 33A (260V) 3.0A(T) 48V DC 3% 0.7A - 10mA/C Vin < 105VAC/120VDC - 6.667mA/V Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/75 Linear power supplies CP-L Range All power supplies are DINrail mountable and available with 230V or 115VAC input voltage, and deliver a stable and regulated DC output voltage with a low residual ripple of 1%. * The ouput is short-circuit and overload protected * A LED provides status operation Type Supply Voltage Output Voltage Weight Order Code CP-L5/1.0 115VAC 230VAC 5VDC/1A 5VDC/1A 0.820 0.820 1SVR419500R3000 1SVR419500R3100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 47 - 63Hz min. 5 ms with 100% load typ. 0.16A, 115V / typ./ 0.08A, 230V 0.2A (T) 115V / 0.125A (T) 230V CP-L Type Supply Voltage Output Voltage Weight Order Code CP-L12/0.5 115VAC 230VAC 12VDC/0.5A 12VDC/0.5A 0.820 0.820 1SVR419501R1000 1SVR419501R1100 CP-L12/1.0 115VAC 230VAC 12VDC/1A 12VDC/1A 0.780 0.780 1SVR419501R3000 1SVR419501R3100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 5VDC, 12VDC 15VDC, 24VDC 47 - 63Hz min. 5 ms with 100% load 0.5A: typ. 0.14A / typ. 0.07A 0.5A: 0.2A(T) / 0.125A (T) 1A: 0.32A / 0.16 (T) 1A: 0.4A (T) / 0.2A (T) Type Supply Voltage Output Voltage Weight Order Code CP-L15/0.5 115VAC 230VAC 15VDC/0.5A 15VDC/0.5A 0.820 0.820 1SVR419502R1000 1SVR419502R1100 CP-L15/1.0 115VAC 230VAC 15VDC/1A 15VDC/1A 0.780 0.780 1SVR419502R3000 1SVR419502R3100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 47 - 63Hz min. 5 ms with 100% load 0.5A: typ. 0.14A / typ. 0.07A 0.5A: 0.2A(T) / 0.125A (T) 1A: 0.35A / 0.175 (T) 1A: 0.4A (T) / 0.2A (T) Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/76 Linear power supplies CP-L Range 12VDC stabilised 15VDC stabilised Type Supply Voltage Output Voltage Weight Order Code CP-L24/0.25 115VAC 230VAC 24VDC/0.25A 24VDC/0.25A 0.820 0.820 1SVR419503R0000 1SVR419503R0100 CP-L24/0.75 115VAC 230VAC 24VDC/0.75A 24VDC/0.75A 1.050 1.050 1SVR419503R2000 1SVR419503R2100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 47 - 63Hz min. 5 ms with 100% load 0.25A: typ. 0.14A / typ. 0.07A 0.25A: 0.2A(T) / 0.125A (T) 0.75A: 0.35A / 0.175 (T) 0.75A: 0.4A (T) / 0.2A (T) Type Supply Voltage Output Voltage Weight Order Code CP-L12/0.5 115VAC 230VAC 12VDC/0.5A 12VDC/0.5A 1.070 1.070 1SVR419511R1000 1SVR419511R1100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 47 - 63Hz min. 5 ms with 100% load typ. 0.35A, 115V / typ. 0.16A, 230V 0.4A (T) 115V / 0.2A (T) 230V Type Supply Voltage Output Voltage Weight Order Code CP-L15/0.5 115VAC 230VAC 15VDC/0.5A 15VDC/0.5A 1.070 1.070 1SVR419512R1000 1SVR419512R1100 Frequency, AC input: Mains buffering: Input current at nominal load: Internal input fuse: 47 - 63Hz min. 5 ms with 100% load typ. 0.35A, 115V / typ. 0.175A, 230V 0.4A (T) 115V / 0.2A (T) 230V Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/77 Power supplies CP range Technical Data CP-12/2.0 CP-12/2.0 adj CP-24/0.3 Residual ripple / noise Description CP-5/3.0 max.50mVpp CP-6/3.0 Max.300mVss max.200mVss max.100mVss Deviation of ouput with input change max. 0.5% max. 0.1% Deviaton of output with static load change max. 0.5% max. 0.5% Dev. of output with static load change 10 - 90% max. 5% Short circuit protection overcurrent switch off with autmomatic restart Overload protection overtemperature and overcurrent switch off Reset after thermal overload Disconnection of AC power input min. 30 s Standards, Tests Electrical safey standards EN 50178 (VDE 0160) / UL 508 / CSA 22.2 Galvanic isolation reliable isolation acc. to IEC 644-1, DINVDE 0106-101 Voltage withstand input <-> output 2.5kVAC, 3 kVAC type test Clearance and creepage distances overvoltage category 2, pollutoin degree 2 Electromagnetic compatibility (EMC-tests) acc. to EN 50082-2 Electromagn. compatibility (EMC) acc. to EN 500081-2, Radiated noise EN 55011 ESD: RF field: Burst: Surge: Conducted RF: class B EN EN EN EN EN class B class B Input current harmonics 61000-4-2 61000-4-4 61000-4-5 61000-4-5 61000-4-6 level level level level level 3 3 4 3 3 class B 6/8kV 10V/m 4kV 3kV 10V class B no limitation Degree of protection terminals IP20 IP20 IP20 IP20 IP20 Degree of protection enclosure IP50 IP30 IP50 IP30 IP50 1 1 1 1 1 approx. 84% approx. 82-84% (90-260VAC) approx. 83-86% (102-260VAC) approx. 82-86% (90-260VAC) approx. 83-86% (140-260VAC) Protection class General Data Efficiency Status indication green LED, power OK Operating temperature 0 - +55C Storage temperature -25C - +75C screw terminals, 2 x 14 AWG (2 x 2.5mm2) Terminals Weight approx. 0.22kg (0.49 lb) Dimensions (W x H x D), mm Description 45 x 78 x 100 CP-24/0.5 Residual ripple / noise Deviation of ouput with input change CP-24/1.0 CP-24/1.5 max.100mVss max. 0.5% CP-24/2.0 CP-24/2.0 adj max.300mVss max. 0.1% max.100mVss max. 0.5% Deviaton of output with static load change max. 0.2% max. 0.5% max. 0.5% Dev. of output with static load change 10 - 90% max. 5% Short circuit protection overcurrent switch off with automatic restart Overload protection overtemperature and overcurrent switch off Reset after thermal overload disconnection of AC power input min. 30s Standards, Tests Electrical safey standards EN 50178 (VDE 0160) / UL508 / CSA 22.2 Galvanic isolation reliable isolation acc. to IEC 664-1, DIN VDE 0106-101 Voltage withstand input <-> output 2.5kVAC, 3kVAC type test Clearance and creepage distances overvoltage category 2, pollution degree 2 Electromagnetic compatibility (EMC-tests) acc. to EN 50082-2 Electromagn. compatibility (EMC) acc. to EN 500081-2, Radiated noise EN 55011 ESD: RF field: Burst: Surge: Conducted RF: class B EN EN EN EN EN class B class B Input current harmonics 61000-4-2 61000-4-4 61000-4-5 61000-4-5 61000-4-6 level level level level level class B 3 3 4 3 3 6/8kV 10V/m 4kV 3kV 10V class B no limitation Degree of protection terminals IP20 IP20 IP20 IP20 IP20 Degree of protection enclosure IP50 IP50 IP30 IP20 IP30 1 1 1 1 1 approx. 84% approx. 82-84% (90-260VAC) approx. 83-86% (102-260VAC) approx. 82-86% (90-260VAC) approx. 83-86% (140-260VAC) Protection class General Data Efficiency Status indication green LED, power OK Operating temperature 0C - +55C Storage temperature -25C - +75C screw terminals, 2 x 14AWG (2.5mm 2) Terminals Dimensions (W x H x D), mm 22.5 x 78 x 100 45 x 78 x 100 45 x 78 x 100 45 x 78 x 120 45 x 78 x 120 Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/78 Power supplies CP range Technical Data CP-48/0.7 CP-24/10 adj CP-24/20 adj Residual ripple / noise Description CP-24/4.2 max.200mVss CP-24/5.0 max.300mVss max.50MVss max.100mVss Deviation of output with input change max.0.05% max.0.5% Deviation of output with static load change CP-24/5.0 adj max.5% max.0.2% max.1.3 (1.5% parrallel operation) Short circuit protection overcurrent switch off with automatic restart Overload protection overtemperature and overcurrent switch off Reset after thermal overload disconnection of ACpower input min. 30s overcurrent limiting Overvoltage protection triggerpoint at typ. 140% nom. output voltage Parallel operation (option) up to 5 modules (must be enabled by internal jumper) Standards, Tests Electrical safety standards EN 50178 (VDE 0160) UL 508/ CSA 22.2 Gakvanic isolation reliable isolation acc. to EN 50178 (VDE 0160) / EN 9060 / UL 508 / CSA 22.2 EN 60950 DIN/VDE 0106-101 IEC 664-1 DIN/ VDE 0106-101 Voltage withstand input<->output 1.5kVAC, 3kVACtype test 2.5kVAC, 3kVAC type test Clearance and creepage distances overvoltage category 3, pollution degree 2 Electromagn. comp. (EMC tests) to EN 50082-2 ESD: RF Field: Burst: Surge: Conducted RF: EN 60950 DIN/ VDE 0106-101 EN 60950 3kVACtype test overvoltage category 2, pollution degree 2 EN 61000-4-2 level 3 EN 61000-4-3 level 3 EN 61000-4-4 level 3 EN 61000-4-5 EN 61000-4-6 level 3 6/8kV 10V/m 2kV (CP-48/0.7 4kV) 2kV (CP-48/0.7 3kV) 10V Input current harmonics EN 61000-4-2 level 3 EN 61000-4-3 level 3 EN 61000-4-4 level 3 EN 61000-4-5 level 4 EN 61000-4-6 level 3 6/8kV 10V/m 4kV 2/4kV 10V no limitation Degree of protection terminals IP20 IP20 IP20 IP20 IP20 IP20 Degree of protection enclosure IP20 IP20 IP20 IP30 IP20 IP20 1 1 1 1 1 1 approx. 77-85% (90-260VAC) approx. 77-85% (90-260VAC) approx. 77-85% (90-260VAC) approx. 83-85% (90-260VAC) typ.90% (230VAC) typ. 88% (230VAC) Protection class General Data Efficiency Status indication green LED, power OK Operating temperature Storage temperature 0C - +55C -25C - +70C -25C - +75C -25C - +85C 2x14 AWG (2 x 2.5mm 2) Screw terminals Dimensions ( W x H x D), mm 90 x 78 x 120 Mounting hints 14AWG (2.5mm2 ) 45 x 78 x 100 100 x 125 x 125 220 x 125 x 125 Normal position: horizontal onto DIN-rail Spacing to other modules left 1cm, vertical distances 5 cm both sides min. 5cm, vertical distances min. 8 cm Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/79 Power supplies CP range Technical Data Description CP-L5/1.0 CP-L12/0.5 CP-L12/1.0 CP-L15/0.5 CP-L15/1.0 Residual ripple / noise CP-L24/0.25 CP-L24/0.75 CP-L12/0.5 CP-L15/0.5 1% Short circuit protection overcurrent switch off with automatic restart Overload protection overtemperature and overcurrent switch off Reset after thermal overload automatic after cooling Standards, Tests Electrical safety standards EN 50178 (VDE 0160) Galvanic isolation reliable isolation EN 60950 Voltage withstand input<->output 4kVAC, 4VAC test Clearance and creepage distances overvoltage category III pollution degree 2 Electromagn. compatibility (EMC-test) ESD: RF fields Burst: Surge: Conducted RF: EN61000-4-2 level 3 (6/8kV) EN61000-4-3 level 3 (10V/m) EN61000-4-4 level 3 (2kV) EN61000-4-5 level 3 (2kV) EN61000-4-6 level 3 (10V) Input current harmonics no limiting Degree of protection Terminals: IP20 Enlcosures: IP20 Protection class: 2 with external product protection General Data Status indication green LED Operating temperature -20 - +50C Storage temperature -40 - +80C screw terminals 14AWG (2.5mm2) Terminals Dimensions (W x H x D) 0.25A 100 x 104 x 79mm Dimensions (W x H x D) 0.25A 100 x 104 x 79mm Dimensions (W x H x D) 0.25A 135 x 104 x 79mm 135 x 104 x 79mm Dimensions (W x H x D) 0.25A 100 x 104 x 79mm Mounting hints Normal position: horizontal onto DIN rail, Spacing to other modules upper 100mm, lower 50mm, sides 20mm Return to main index www.abb.com/lowvoltage ABB LIMITED email marketing.info@gb.abb.com Telephone 02476 368551 Facsimile 02476 368401 2/80