SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO: D-108-06/-08
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980906 REPLACES:
D10807
DRAWN BY:
M. FORONDA DATE: 06/29/98 PROD. REV.
SEE TABLE DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name L
max E
min øA
min øB
min øD
min øD
max
D-108-06 F 127
(5.0) 73
(2.875) 8.9
(0.350) 7.5
(0.295) 4.5
(0.175) 7.5
(0.295)
D-108-07 E 127
(5.0) 74
(2.915) 10.2
(0.400) 8.8
(0.345) 5
(0.200) 8.8
(0.345)
D-108-08 E 131
(5.150) 74
(2.915) 12.7
(0.500) 11.3
(0.445) 7
(0.275) 11.3
(0.445)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn96 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE INSERT: Meltable thermoplastic. Color: clear.
APPLICATION
1. These parts are designed to attach an overshield to butt spliced shielded cables.
2. Temperature range: -55°C to +150°C.
Cable dimensions: see table.
* A trademark of Raychem Corpor ation.
