Shielded Right Angled Adapter, Screwable Geschirmter Winkeladapter, verschraubbar FAW1PS... Ne w Ne pro uh du eit ct Special Features Besondere Merkmale - May be used as a bracket adaptor, e.g. in narrow installation conditions Suitable for robust application Very good shielding properties No loose component or assembly parts, screws are pre-mounted A change in the termination direction is facilitated with "reverse" mounted contacts - Very good electrical properties through the use of one-piece contacts - Also with D-Sub Miniatur connectors - RoHS conform FAW1HPS... - nutzbar als Winkeladapter, z.B. bei beengten Einbauverhaltnissen fur robuste Einsatze geeignet sehr gute Abschirmeigenschaften keine losen Einzel- und Montageteile, Verriegelungsschrauben vormontiert Anderung der Anschlussrichtung durch reverse" montierte Kontakte sehr gute elektrische Eigenschaften durch Verwendung von einteiligen Kontakten - auch mit D-Sub Miniatur Steckverbindern - RoHS konform Ordering Code, Use Contact Type and Direction of Right Angled Contacts Bestellschlussel, Nutzung Kontaktart und Richtung der abgewinkelten Kontakte ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2007 25 Ordering Code Bestellschlussel FAW 1 H PS G1 U - Series Prefix / Serienbezeichnung Insulator / Isolierkorper Standard = Thermoplastic / Thermoplast M H Polyester glass filled, zinc plated shell, pin connectors without dimples Polyester, glasfaserverstarkt, Gehauseoberflache verzinkt, Stiftsteckverbinder ohne Kontaktnoppen NO PERFORMANCE CLASSES! / KEINE GUTESTUFEN! PCT, heat resistant, please check availlability PCT, hochtemperaturbestandig, Liefermoglichkeiten auf Anfrage No. of Contacts / Polzahl 09(15) 15(26) 25(44) 37(62) 50(78) Shell size / Gehausegroe 1 2 3 4 5 Shell size 1 is available, further shell sizes on request Gehausegroe 1 ist verfugbar, weitere Gehausegroen auf Anfrage Type of connector / Steckverbindertyp Standard D-Sub Miniatur connector/ Standard D-Sub Miniatur Steckverbinder H High Density connector / High Density Steckverbinder Contact Type / Kontaktart PS Pin contacts appliance side, socket contacts termination side Stiftkontakte gerateseitig, Buchsenkontakte anschlussseitig SP Socket contacts appliance side, pin contacts termination side Buchsenkontakte gerateseitig, Stiftkontakte anschlussseitig Direction of Right Angled Contacts / Richtung der abgewinkelten Kontakte Standard / Standard R Reverse (Not available with stamped contacts) / Revers (nicht mit gestanzten Kontakten moglich) Performance Classes Available in Accordance with DIN 41652 Lieferbare Gutestufen nach DIN 41652 Standard insulator / Standardisolierkorper G1 = 500 Contact cycle / Steckzyklen = Performance class 1 / Gutestufe 1 G2 = 200 Contact cycle / Steckzyklen = Performance class 2 / Gutestufe 2 G3 = 50 Contact cycle / Steckzyklen = Performance class 3 / Gutestufe 3 Pin connector with dimples / Stiftsteckverbinder mit Kontaktnoppen Mounting Type / Befestigungsarten Termination side / anschlussseitig U UM3 M MM3 Appliance side / gerateseitig Female Screw Lock 4-40 / Sechskantbolzen 4-40 Screw 4-40 / Schraube 4-40 Female Screw Lock 4-40 / Sechskantbolzen 4-40 Screw M3 / Schraube M3 Female Screw Lock M3 / Sechskantbolzen M3 Screw 4-40/ Schraube 4-40 Female Screw Lock M3 / Sechskantbolzen M3 Screw M3 / Schraube M3 Modifications / Modifikationen 26 HD 01/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN) ... Technical Data Technische Daten Mechanical Data Mechanische Daten Mechanical Data Mechanische Daten Mating force per signal contact Steckkraft pro Signalkontakt Unmating force per signal contact Ziehkraft pro Signalkontakt max. torque * max. Anzugsmoment * d3,4 N t0,2 N 40 Ncm (0,295 ft.lb.) 40 Ncm * Not for locking screws * Nicht fur Verriegelungsschrauben Electrical Data Elektrische Daten Electrical Data Elektrische Daten Current rating at room temperature Maximale Stromstarke bei Raumtemperatur Test voltage between 2 contacts / shell and contact Prufspannung zwischen 2 Kontakten bzw. Kontakt und Gehause Meets transition resistance requirements per contact pair in line with DIN 41652: Erfullt Ubergangswiderstand pro Kontaktpaar nach DIN 41652 fur: - Right angled contacts / abgewinkelte Kontakte - Right angled contacts - 50 way / abgewinkelte Kontakte bei 50 Polen Insulation resistance between contacts Isolationswiderstand Kontakt / Kontakt Volume resistivity Spezifischer Durchgangswiderstand Dielectric strength Spezifische Durchschlagsfestigkeit 5A 1200 V / 1 min. d 25 m: d 35 m: t 5000 M: 16 10 : cm 50 kV / mm Materials and Platings Materialien und Oberflachen Materials and Platings Materialien und Oberflachen Shell Gehause Type / Type Insulator Isolierkorper Relative temperature index according to UL 746 B rel. Temperaturindex nach UL 746 B Heat deflection temperature limit according to DIN 53461 HDT/A Formbestandigkeitstemperatur nach DIN 53461 HDT/A Lower limit temperature Untere Grenztemperatur Shell plating (standard) Gehauseoberflache (Standard) Shell (standard) Gehause (Standard) F Thermoplastic, glass filled (UL94V-0), white Thermoplast, glasfaserverstarkt (UL94V-0), wei Steel Stahl FH FM PCT, glass filled (UL94V-0), natural Polyester, glass filled (UL94V-0), green PCT, glasfaserverstarkt (UL94V-0), natur Polyester, glasfaserverstarkt (UL94V-0), grun 125 C (257 F) 150 C (302 F) 130 C (266 F) 200 C (392 F) 255 C (491 F) 210 C (410 F) -55 C (-67 F) -55 C (-67 F) Tin plated over nickel verzinnt uber Nickel Pin connector shell with dimples Stiftsteckverbindergehause mit Kontaktnoppen Shell (K120) Gehause (K120) Shell (K121) Gehause (K121) Contact material Kontaktmaterial ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE -55 C (-67 F) Blue chromate over zinc plating verzinkt und blau chromatiert Pin connector shell without dimples Stiftsteckverbindergehause ohne Kontaktnoppen Tin plated over nickel, pin connector shell with dimples verzinnt uber Nickel, Stiftsteckverbindergehause mit Kontaktnoppen Tin plated over nickel, socket connector shell without dimples verzinnt uber Nickel, Buchsensteckverbindergehause ohne Kontaktnoppen Copper alloy Kupfer-Legierung HD 01/2007 27 Dimensions Abmessungen Order Number Bestellnummer FAW1 FAW2 FAW3 FAW4 A B C D 0,3 0,2 0,15 0,2 (0.012) (0.008) (0.016) (0.008) 30,8 16,9 25,0 16,4 (1.213) (0.665) (0.984) (0.646) 39,1 25,2 33,3 24,7 (1.539) (0.992) (1.311) (0.972) 52,8 38,9 47,0 28,5 (2.079) (1.532) (1.850) (1.122) 69,3 55,3 63,5 54,9 (2.728) (2.177) (2.500) (2.161) Size 2 - 4 on request Groe 2 - 4 auf Anfrage Application Example Einsatzbeispiel 28 HD 01/2007 TECHNISCHE ANDERUNGEN VORBEHALTEN - MAE IN MILLIMETER (INCHES IN KLAMMERN)