DATA SHEET UPG2027TQ D NEC's L-BAND 4W HIGH POWER SPDT SWITCH IC FEATURES DESCRIPTION * NEC's UPG2027TQ is a high power SPDT GaAs Switch IC LOW INSERTION LOSS: device can operate from 500 MHz to above 2.0 GHz, with low 0.50 dB TYP. @ 2.0 GHz * HIGH LINEARITY: 2f0, 3f0 = 70 dBc TYP. @ 1.0 GHz, Pin = +35 dBm * HIGH-DENSITY SURFACE MOUNTING: insertion loss and high linearity. 2f0, 3f0 = 70 dBc TYP. @ 2.0 GHz, Pin = +33 dBm 10-pin plastic TSON package (2.30 x 2.55 x 0.60 mm) Pb FREE APPLICATIONS * GSM Triple / Quad Band Cellular * Cordless Phones IN * UE for digital cellular and cordless telephone applications. This 0.40 dB TYP. @ 1.0 GHz NT * Short Range Wireless SC O ORDERING INFORMATION PART NUMBER UPG2027TQ-E1-A PACKAGE 10-pin plastic TSON MARKING 2027 SUPPLYING FORM * Embossed tape 8 mm wide * Pins 5, 6 face the perforation side of the tape * Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. DI Part number for sample order: UPG2027TQ-A California Eastern Laboratories UPG2027TQ PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM 10 9 8 7 (Bottom View) 6 6 7 8 9 PIN NO. 10 1 Vcont2 2 NC (GND) 3 2 3 4 5 5 4 3 2 5 6 1 Operating Ambient Temperature Storage Temperature Control Voltage (High) DI 10 RF2 C C +8.0 V +38 dBm SYMBOL MIN. TYP. Vcont (H) +2.5 +2.7 +5.0 V Vcont (L) 0 0 +0.2 V SC O Control Voltage (Low) NC (GND) -45 to +85 UNIT RECOMMENDED OPERATING RANGE (TA =+25C) PARAMETER NC (GND) 9 -55 to +150 Pin RF1 8 TA Vcont Vcont1 NC (GND) Tstg RATINGS NT Control Voltage Input Power SYMBOL NC (GND) 7 IN ABSOLUTE MAXIMUM RATINGS (TA =+25C, unless otherwise specified) PARAMETER Common UE 2027 1 4 NC PIN NAME D (Top View) MAX. UNIT UPG2027TQ ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = +2.5 V/0 V, ZO = 50 , DC blocking capacitors value: 56 pF, Each port, unless otherwise specified) Isolation 2nd Harmonics 3rd Harmonics LINS ISL 2f0 3f0 tsw Control Current Icont MIN. TYP. UNIT f = 0.5 to 1.0 GHz - 0.40 0.65 dB - 0.50 0.75 dB f = 0.5 to 1.0 GHz 23 f = 1.0 to 2.0 GHz 17 f = 1.0 GHz, Pin = +35 dBm 65 f = 2.0 GHz, Pin = +33 dBm 65 f = 1.0 GHz, Pin = +35 dBm f = 2.0 GHz, Pin = +33 dBm No RF NT SC O DI MAX. f = 1.0 to 2.0 GHz 25 - dB 18.5 - dB 70 - dBc 70 - dBc 65 70 - dBc 65 70 - dBc - 1 5 s - - 50 A IN Switching Speed TEST CONDITIONS D Insertion Loss SYMBOL UE PARAMETER UPG2027TQ EVALUATION CIRCUIT C1 C1 Common C2 C1 IN Vcont1 2027 C2 RF2 UE Vcont2 D Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board. RF1 NT The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. TRUTH TABLE Vcont2 SC O NC (GND) VCONT2 NC (GND) NC (GND) NC (GND) RF1 COMMON-RF1 COMMON-RF2 High Low ON OFF Low High OFF ON DI NC (GND) Common Vcont1 VCONT1 RF2 UPG2027TQ PACKAGE DIMENSIONS (0.15) UE IN (0.60 MAX.) (1.70) SC O NT (0.125) (1.95) (0.95) 2.250.1 2.550.15 2.200.1 2.300.15 DI D (Bottom View) 0.180.05 (0.05) 0.400.05 (0.30) 10-PIN PLASTIC TSON (UNIT:mm) (0.30) UPG2027TQ RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) VPS Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Partial Heating IR260 VP215 Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below WS260 Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 NT IN : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below Do not use different soldering methods together (except for partial heating). DI SC O Caution : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below D Infrared Reflow Condition Symbol UE Soldering Method Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 11/12/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected Cadmium SC O Hexavalent Chromium -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.