CDSCB10M7GA136R0 - Murata - Product.Network

5

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFXCE Series

CFXCE series are very small and high-efficiency

surface mount, ladder type 450/455 kHz ceramic filters

"CERAFIL" for IF section.

Compared to our previous compact surface mounted

6-element product, this ceramic filter has been

significantly downsized to approximately one-third

the original volume and reduced to less than 2mm in

height.

As for electrical performance, this product, which

consists of 4 elements, provides stop band attenuation

equivalent to that of our previous 6-element product.

The input/output impedance characteristics are also

equivalent to those of the previous product, and

spurious responses in the vicinity of the passing band

can now be eliminated. This allows mobile

telecommunications equipment manufacturers to easily

design the periphery of the IF section and thus

greatly enhance the interference suppression

capability of the equipment. In addition, this ceramic

filter provides flatter group delay time

characteristics than the previous product, and will

effectively work as a component for data transmission

in digital mobile telecommunications systems.

■ Features

1. Compact, thin, and lightweight

Size: 3.8x3.2x1.25mm

Weight: 40mg

2. Out-of-band attenuation is increased and spurious

responses are greatly decreased.

3. Group delay time characteristics are flattened.

4. Surface mountable, and reflow soldering can be used

for mounting. Available lead (Pb) free solder

reflow

■ Applications

1. IF filters for PDCs

2. IF filters for various types of pagers

3. IF filters for various types of analog and digital

cellular telephones

4. IF filters for radio communication circuits

applicable for PDA or PCMCIA

5. IF filters for other general mobile wireless

equipment

*

3.8

3.2

(2.9)

Input terminal marking

(3.5)

0.3

4-0.9

4-0.35

(1) (2)

(4) (3)

(5)

1.2

4-1.4

1.8

(1)

(2)

(3)(4)(5)

Tolerance unless

otherwise specified : ±0.1

( )

: Input

: Output

: Ground

: Reference

(in mm)

1.2+0.05

-0.10

Part Number Nominal Center

Frequency (fn)

(kHz)

3dB

Bandwidth

(kHz)

6dB

Bandwidth

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Stop Band Att.(2)

(dB) Stop Band Att.(3)

(dB)

Insertion

Loss

(dB)

Ripple

(dB) GDT Deviation

(µs)

CFXCE450KCFA-R1

450 fn±9.0 to

±12.0kHz max. -fn±35.0 max.

[within 50dB] 30 min.

[at fn±25kHz] 55 min.

[within fn±40kHz to ±50kHz] 47 min.

[within fn±100kHz] 6.0 max.

[at fn] 0.5 max.

[within fn±10.5kHz] 27.0 max.

[within fn±10.5kHz]

Spurious:40dB [within 0.1 to 1.0MHz]

Input/Output Impedance: 2000 ohm

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

6

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Test Circuit

(1) (2)

(4) (3)

Rg

S.S.G.

0dBm

R1

R2

(1) Input

(2) Output

(3)(4)(5) Ground

RF VoltmeterE1 E2

R1 + Rg = R2 = Input/Output Impedance

E1 : S.S.G. Output Voltage

(5)

■ Frequency Characteristics

Attenuation (dB)

G.D.T. (µsec.)

Frequency (kHz)

35

40

30

25

20

15

10

5

0

50

100

150

200

450.0 475.0425.0

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

7

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type SFPKA Series

The SFPKA series is comprised of small, high performance,

economical, thin (5.0mm) filters consisting of 4

ceramic elements.

Their innovative construction is perfect for shrinking

mobile communication products such as cordless phones,

pager and transceivers.

■ Features

1. The filters are mountable by automatic placers.

2. The filters can be reflow soldered and withstand

washing.

3. They are slim, at only 5.0mm maximum thickness.

4. The bandwidth ranges from D to H.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

7.5±0.3

5.0 max.

3.0±0.3

8.4 max.

2.0±0.3

1.5±0.3

7.0±0.3

0.9±0.1

MARKING

EIAJ

CODE

2.0±0.3

(1) (2) (3)

1.5±0.3 1.6±0.3Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Ripple

(dB)

Input/Output

Impedance

(ohm)

SFPKA455KD4A-R1 455.0

±1.5kHz fn±10.0

min. fn±20.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 2.0 max.

[within fn±7kHz] 1500

SFPKA455KE4A-R1 455.0

±1.5kHz fn±7.5

min. fn±15.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±5kHz] 1500

SFPKA455KF4A-R1 455.0

±1.5kHz fn±6.0

min. fn±12.5 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±4kHz] 1500

SFPKA455KG1A-R1 455.0

±1.0kHz fn±4.5

min. fn±10.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±3kHz] 1500

SFPKA455KH1A-R1 455.0

±1.0kHz fn±3.0

min. fn±9.0 max.

[within 40dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±2kHz] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

Rg+R1=R2=Input/Output Impedance

E1 : S.S.G. Output Voltage

E1

R1

Rg

S.S.G.

0dBm

(1)

(2)

(3)

R2 E2 RF Voltmeter

(1) : Input

(2) : Ground

(3) : Output

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

8

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

SFPKA455KE4A-R1

100

40

30

20

10

0

Attenuation (dB)

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

0

240

280

320

360

400

40

80

120

160

200

SFPKA455KE4A-R1

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

9

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFUKG Series

The CFUKG series is comprised of small, high performance,

thin (4.0mm) filters consisting of 4 ceramic elements.

Their innovative construction is perfect for shrinking

mobile communication products such as pocket pagers

and cellular phones.

■ Features

1. The filters are mountable by automatic placers.

2. The filters can be reflow soldered and withstand

washing.

3. They are slim, at only 4.0mm maximum thickness,

and have a small mounting area (7.5x6.0mm)

enabling flexible PCB design.

4. The bandwidth ranges from D to G.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

1.5±0.3 3.0±0.3

1.0±0.1

4.0±0.3

6.5±0.3

7.5 max.

C0.5 1.2±0.1

4.0 max.

1.0±0.1

(in mm)

Connection

(1) : Input

(2) : Output

(3) : Ground

1.0±0.3 1.0±0.31.5±0.3

6.0±0.3

(1) (2)

(3)

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Ripple

(dB)

Input/Output

Impedance

(ohm)

CFUKG455KD4A-R0 455.0

±1.5kHz fn±10.0

min. fn±20.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 2.0 max.

[within fn±7kHz] 1500

CFUKG455KE4A-R0 455.0

±1.5kHz fn±7.5

min. fn±15.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±5kHz] 1500

CFUKG455KF4A-R0 455.0

±1.5kHz fn±6.0

min. fn±12.5 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±4kHz] 1500

CFUKG455KG1A-R0 455.0

±1.0kHz fn±4.5

min. fn±10.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.5 max.

[within fn±3kHz] 1500

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

Rg

S.S.G.

0dBm

R1

RF Voltmeter

Connection

(1) : Input

(2) : Output

(3) : Ground

(2)

(3)

(1)

R2 E2

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

10

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFUKG455KE4A-R0

100

40

30

20

10

0

Attenuation (dB)

0

100

200

300

400

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFUKG455KE4A-R0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

11

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFUKG_X Series

The CFUKG_X series is comprised of small, high performance,

thin (4.0mm) filters consisting of 4 ceramic elements.

The filters exhibit an extremely flat GDT

characteristic combined with a narrow bandwidth.

The filters are recommended for narrow band digital

communication applications.

■ Features

1. The filters are mountable by automatic placers.

2. The filters can be reflow soldered and withstand

washing.

3. They are slim, at only 4.0mm maximum thickness,

and have a small mounting area (7.5x6.0mm)

enabling flexible PCB design.

4. The bandwidth ranges from E to H.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

1.5±0.3 3.0±0.3

1.0±0.1

4.0±0.3

6.5±0.3

7.5 max.

C0.5 1.2±0.1

4.0 max.

1.0±0.1

(in mm)

Connection

(1) : Input

(2) : Output

(3) : Ground

1.0±0.3 1.0±0.31.5±0.3

6.0±0.3

(1) (2)

(3)

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Ripple

(dB) GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFUKG455KE4X-R0

455.0

±1.5kHz fn±7.5

min. fn±17.5 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.0 max.

[within fn±5kHz] 25.0 max.

[within fn±5kHz] 1500

CFUKG455KF4X-R0

455.0

±1.5kHz fn±6.0

min. fn±15.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.0 max.

[within fn±4kHz] 25.0 max.

[within fn±4kHz] 1500

CFUKG455KG1X-R0

455.0

±1.0kHz fn±4.5

min. fn±12.5 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.0 max.

[within fn±3kHz] 25.0 max.

[within fn±3kHz] 1500

CFUKG455KH1X-R0

455.0

±1.0kHz fn±3.0

min. fn±10.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 1.0 max.

[within fn±2kHz] 25.0 max.

[within fn±2kHz] 1500

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

Rg

S.S.G.

0dBm

R1

RF Voltmeter

Connection

(1) : Input

(2) : Output

(3) : Ground

(2)

(3)

(1)

R2 E2

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

12

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFUKG455KE4X-R0

100

40

30

20

10

0

Attenuation (dB)

0

50

100

150

200

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFUKG455KE4X-R0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

13

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFUKF Series

The CFUKF series is comprised of small, high performance,

thin (4.0mm) filters consisting of 4 ceramic elements.

The filters exhibit an extremely flat GDT

characteristic.

The filters are recommended for digital

communication applications and are perfect in hand

held cellular phones, etc.

■ Features

1. The filters are mountable by automatic placers.

2. The filters can be reflow soldered and withstand

washing.

3. They are slim, at only 4.0mm maximum thickness,

and have a small mounting area (7.5x6.0mm)

enabling flexible PCB design.

4. The bandwidth ranges from A to E.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

1.5±0.3 3.0±0.3

1.0±0.1

4.0±0.3

6.5±0.3

7.5 max.

C0.5 1.2±0.1

4.0 max.

1.0±0.1

(in mm)

Connection

(1) : Input

(2) : Output

(3) : Ground

1.0±0.3 1.0±0.31.5±0.3

6.0±0.3

(1) (2)

(3)

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Ripple

(dB) GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFUKF455KA2X-R0

455.0

±2.0kHz fn±17.5

min. fn±40.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1.0 max.

[within fn±12kHz] 15.0 max.

[within fn±12kHz] 1000

CFUKF455KB4X-R0

455.0

±1.5kHz fn±15.0

min. fn±35.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 5.0 max.

[at minimum loss point] 1.0 max.

[within fn±10kHz] 15.0 max.

[within fn±10kHz] 1000

CFUKF455KC4X-R0

455.0

±1.5kHz fn±12.5

min. fn±30.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1.0 max.

[within fn±8kHz] 15.0 max.

[within fn±8kHz] 1000

CFUKF455KD1X-R0

455.0

±1.0kHz fn±10.0

min. fn±25.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 1.0 max.

[within fn±7kHz] 20.0 max.

[within fn±7kHz] 1500

CFUKF455KE1X-R0

455.0

±1.0kHz fn±7.5

min. fn±20.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 8.0 max.

[at minimum loss point] 1.0 max.

[within fn±5kHz] 20.0 max.

[within fn±5kHz] 1500

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

Rg

S.S.G.

0dBm

R1

RF Voltmeter

Connection

(1) : Input

(2) : Output

(3) : Ground

(2)

(3)

(1)

R2 E2

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

14

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFUKF455KE1X-R0

100

40

30

20

10

0

Attenuation (dB)

0

50

100

150

200

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFUKF455KE1X-R0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

15

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFWKA Series

The CFWKA series is comprised of small, high performance,

thin (3.0mm) filters consisting of 6 ceramic elements.

The filters are recommend for pager or hand held

cellular phones.

■ Features

1. The filters are mountable by automatic placers.

2. The filters can be reflow soldered.

3. They are slim, at only 3.0mm maximum thickness.

4. The filters are wide bandwidth, flat GDT within

pass band.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

MARKING

6.5

7.5 max.

3.0max.

11.5 5.5 3.0

1.2±0.1

1.5±0.3

1.2±0.1 1.2±0.1

1.5±0.3

1.2±0.1 C0.3

3.0

3.0 5.5

Dot marking

Sealing

: Input

: Output

: Ground

(1) (1)

(2) (2)

(4) (3) (3)(4)

EIAJ

CODE

Tolerance ±0.3mm

in mm

( )

Part Number Nominal Center

Frequency (fn)

(kHz)

3dB

Bandwidth

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Stop Band Att.(2)

(dB)

Insertion

Loss

(dB)

Ripple

(dB)

Input/Output

Impedance

(ohm)

CFWKA450KDFA-R0

450 - fn±10.0

min. fn±20.0 max.

[within 50dB] 50 min.

[within fn±100kHz] -4.0 max.

[at minimum loss point] 3.0 max.

[within fn±7kHz] 1500

CFWKA450KEFA-R0

450 - fn±7.5

min. fn±15.0 max.

[within 50dB] 50 min.

[within fn±100kHz] -6.0 max.

[at minimum loss point] 3.0 max.

[within fn±5kHz] 1500

CFWKA450KEFA001-R0

450 fn±6.5 min. - fn±15.0 max.

[within 50dB] 55 min.

[fn±18 to ±33kHz] 50 min.

[within fn±100kHz] 4.0 max.

[at fn] 3.0 max.

[within fn±6.5kHz] 1500

CFWKA450KFFA-R0

450 - fn±6.0

min. fn±12.5 min.

[within 50dB] 50 min.

[within fn±100kHz] -6.0 max.

[at minimum loss point] 3.0 max.

[within fn±4kHz] 1500

CFWKA450KGFA-R0

450 - fn±4.5

min. fn±11.0 max.

[within 50dB] 50 min.

[within fn±100kHz] -6.0 max.

[at minimum loss point] 2.0 max.

[within fn±3kHz] 1500

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

Rg

S.S.G.

0dBm

R1

RF Voltmeter

Connection

(1) : Input

(2) : Output

(3)(4) : Ground

(2)

(4)

(1)

R2 E2

(3)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

16

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFWKA450KEFA001-R0

Frequency (kHz)

Attenuation (dB)

G.D.T. (µ sec.)

400

300

200

100

0

440.0 450.0 460.0

0

4

8

12

16

20

24

28

32

36

40

CFWKA450KEFA001-R0

10

0

20

30

40

50

60

70

80

90

100 430 455 480

Frequency (kHz)

Attenuation (dB)

CFWKA450KEFA001-R0

Frequency (kHz)

Attenuation (dB)

200 300 400 500 600 700 800 900 1000

0

10

20

30

40

50

60

70

80

90

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

17

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr kHz SMD Type CFWKA_Y Series

The CFWKA_Y series is comprised of small, high performance,

thin (3.0mm) filters consisting of 6 ceramic elements.

The filters are recommend for digital communication

applications and are perfect in hand held cellular

phones.

■ Features

1. The filters are mountable by automatic placers, and

can be reflow soldered.

2. They are slim, at only 3.0mm maximum thickness.

3. The filters are wide bandwidth, flat GDT within

pass band.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

Y50

B 1

6.5

7.5 max.

3.0 max.

11.5 5.5 3.0

1.2±0.1

1.5±0.3

1.2±0.1 1.2±0.1

1.5±0.3

1.2±0.1 C0.3

3.0

3.0 5.5

Dot marking

Sealing

Tolerance ±0.3mm

in mm

: Input

: Output

: Ground

(1) (1)

(2)

(4) (3)

(3)(4)

EIAJ

CODE

( )

Part Number Nominal Center

Frequency (fn)

(kHz)

3dB

Bandwidth

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Spurious

Response

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFWKA450KBFY001-R0

450 fn±11.5 min. fn±13.0

min. fn±30.0 max.

[within 50dB] 45 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 20 min.

[within 0.1 to 1.0MHz] 30.0 max.

[within fn±10kHz] 1000

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

Rg

S.S.G.

0dBm

R1

RF Voltmeter

Connection

(1) : Input

(2) : Output

(3)(4) : Ground

(2)

(4)

(1)

R2 E2

(3)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

18

7

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

Attenuation (dB)

G.D.T. (µ sec.)

200

150

100

50

0

420 430 440 450 460 470 480

Frequency (kHz)

0

2

4

6

8

10

12

14

16

18

20

Frequency (kHz)

Attenuation (dB)

200 300 400 500 600 700 800 900 1000

0

10

20

30

40

50

60

70

80

90

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

22

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr MHz SMD Type SFECS10M8 Series

The SFECS10M8 series are small, high performance and

super thin (1.5mm max.) filters. Piezoelectric element

is connected in the sandwich shape by heat resistant

substrate.

The filters exhibit flat GDT characteristic in pass

band.

The filters are recommended for digital communication

applications and are perfect in hand held cellular

phones, pocket cordless phones, etc.

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.5mm max. thickness, and have

a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Types with 10.7/10.75/10.8MHz of center

frequency are available.

4. Operating temperature range: -10 to +50 (degree C)

Storage temperature range: -40 to +85 (degree C)

Input electrode marker

3.45±0.2

3.10±0.2

1.4±0.1

(1)

(4)

(2) (3)

0.7±0.30.7±0.30.7±0.3

(1.30) (1.30)

0.85±0.30.85±0.3

0~0.3 0~0.3

0.6±0.3

(1.35) (1.35)

0.6±0.3

0~0.3 0~0.3

0.4

+0.3

-0.2

(1) : Input

(2) : Ground

(3) : Float (Signal line)

(4) : Output

( ) : Reference

: EIAJ Monthly Code

(in mm)

Part Number Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Insertion

Loss

(dB)

Ripple

(dB)

Spurious

Response

(dB)

GDT Deviation

(µs) Absolute GDT

(µs)

Input/Output

Impedance

(ohm)

SFECS10M8PF00-R0

10.800 fn±110 min. fn±310 max.

[within 20dB] 6.0 max.

[at fn] 0.5 max.

[within fn±100kHz] -1.5 max.

[within fn±100kHz] 2.8 ±1.0µs

[at fn] 330

SFECS10M8RF00-R0

10.800 fn±135 min. fn±350 max.

[within 20dB] 6.0 max.

[at fn] 0.5 max.

[within fn±100kHz] -1.2 max.

[within fn±100kHz] 2.6 ±1.0µs

[at fn] 330

SFECS10M8SF00-R0

10.800 fn±150 min. fn±420 max.

[within 20dB] 5.0 max.

[at fn] 1.0 max.

[within fn±110kHz] 25 min.

[within 9 to 12 MHz] 1.5 max.

[within fn±110kHz] - 330

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

Rg

S.S.G.

=−10dBm RF

Voltmeter

R2

1

2

3

C2

E2E1

R1

: Input

: Ground

: Float

: Output

1

2

3

4

Rg + R1 = R2 = Input/Output Impedance

C2 = 10pF

(Including stray capacitance and capacitance of RF Voltmeter)

E1 : S. S. G. Output Voltage

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

23

8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

SFECS10M8PF00-R0

10.6 10.8

Frequency (MHz)

Attenuation (dB)

G. D. T. (µsec)

8

6

4

2

0

6

2

3

4

5

7

10.7 10.9 11.0

SFECS10M8PF00-R0

Attenuation (dB)

40

20

0

80

60

9.6 10.2 Frequency (MHz) 12.0

10.8 11.4

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

24

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr MHz SMD Type SFECF10M7 Series

SFECF10M7 series for FM-receivers are small, high

performance and super thin (1.4mm max.) filters.

Piezoelectric element is connected in the sandwich

shape by ceramics substrate.

They have 1.4mm max. thickness and small mounting area.

(3.45x3.1mm)

SFECF series and CDSCB series (MHz Discriminator)

enable customers to make VICS/RKE/TPMS set so thin and

small sized.

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.4mm max. thickness, and

have a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Various bandwidths are available. Select a

suitable type in accordance with the desired

selectivity.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

0.75±0.3

(in mm)

1.3±0.1

3.1±0.2

3.45±0.2

(0.6)(0.6) (0.6)

(1.28)

0 to 0.4

(6)

(1.28)(1.28)

0.65±0.3

0.85±0.3

0 to 0.35 0 to 0.35

0 to 0.4

(5) (4)

(1) (2) (3)

0.65±0.3

0.3 min.0.3 min.

: EIAJ Monthly Code

: Reference( )

(1) : Input

(2)(5) : Ground

(3)(4) : No connect

(6) : Output

0.7±0.3

Input electrode

marker

Part Number Center

Frequency (fo)

(MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB Bandwidth

(kHz) Attenuation

(kHz)

Insertion

Loss

(dB)

Ripple

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFECF10M7HA00-R0

10.700 ±30kHz - 180 ±40kHz 470 max. 4.0 ±2.0dB 1.0 max. 30 min. 330

SFECF10M7GA00-R0

10.700 ±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 1.0 max. 30 min. 330

SFECF10M7FA00-R0

10.700 ±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min. 330

SFECF10M7EA00-R0

10.700 ±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 1.0 max. 30 min. 330

SFECF10M7DF00-R0

- 10.700 fn±150 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 330

Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz]

Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.

Center frequency (fo) defined by center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

(1)

(2)

(3)

(6)

(5)

(4)

R2C2E2RF

Voltmeter

R1

E1

S.S.G.

Rg

Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%

C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance

of RF Volt Meter)

E1 : S.S.G. Output Voltage

Input

Ground

No connect

Output

(1) :

(2)(5) :

(3)(4) :

(6) :

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

25

9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

SFECF10M7FA00-R0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Frequency (MHz)

Attenuation (dB)

10.300 10.500 10.700 10.900 11.100

G.D.T. (µsec.)

7

6

5

4

3

2

1

0

SFECF10M7FA00-R0

Frequency (MHz)

Attenuation (dB)

8.700 9.700 10.700 11.700 12.700

0

10

20

30

40

50

60

70

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

26

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr MHz SMD Type SFECD10M7 Series

SFECD10M7 series for FM-receivers are small, high

performance and ultra thin (1.0mm max.) filters.

Piezoelectric element is connected in the sandwich

shape by very thin ceramics substrate.

They have 1.0mm max. thickness and small mounting area.

(3.45x3.1mm)

SFECD series enable customers to make RF modules so

thin and small sized.

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.0mm max. thickness, and

have a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

■ Applications

1. Card type radios

2. Card type RKE modules

3. Card type PHS modules

: Marking

: EIAJ Monthly Code

: Center Frequency

Rank Code

: Reference( ) (in mm)

1.0 max.

3.1±0.2

3.45±0.2

(0.6)(0.6) (0.6)

(1.28)

0 to 0.4

(6)

(1.28)(1.28)

0.65±0.3

0.85±0.3

0 to 0.35 0 to 0.35

0 to 0.4

0.75±0.3

(5) (4)

(1) (2) (3)

0.65±0.3

0.55±0.3 (1) : Input

(2)(5) : Ground

(3)(4) : No Connect

(6) : Output

Part Number Center

Frequency (fo)

(MHz)

Nominal Center

Frequency (fn) 3dB Bandwidth

(kHz) Attenuation

(kHz)

Insertion

Loss

(dB)

Ripple

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFECD10M7FA00-R0

10.700 ±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min. 330

Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz]

Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.

Center frequency (fo) defined by center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

R1+Rg=R2=330Ω±5%, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2)(5) : Ground

(3)(4) : Float

(6) : Output

RF

Voltmeter

E2C2E1 R2

R1

Rg

S.S.G.

(6)(1)

(2)

(3)

(5)

(4)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

27

10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

7

6

5

4

3

2

1

0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

10.70010.50010.300 10.900 11.100

0

1

2

3

4

5

6

7

Attenuation (dB)

Frequency (MHz)

0

10

20

30

40

50

60

70

8.700 9.700 10.700 11.700 12.700

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

28

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr MHz SMD Type SFSCD20M0 Series

SFSCD series are chip surface mount filter, having

center frequency 15 to 22 MHz and 3dB bandwidth

1.2 to 1.8MHz (at 20MHz).

(More than twice width compared with current types)

They have 1.0mm max. thickness and small mounting area.

(4.5x3.8mm)

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.0mm max. thickness, and

have a small mounting area (4.5x3.8mm) enabling

flexible PCB design.

3. Available lead (Pb) free solder reflow.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

■ Applications

1. GPS

2. Wireless audio

(3.5)

(in mm)

*

0.4

3.8(1.8)

4.5

(1) (2)

(4) (3)

(4.0)

1.0 max.0.85 0.150.3

(1)

(2)

(3)

(4)

Tolerance unless

otherwise specified : ±0.1

( )

: Input

: Output

: No Connect

: Ground

: EIAJ Monthly Code

: Reference

*

(2.25) 1.1

0.6

0.15

(4-R0.3)

(0.3)

(1)

(4)

(2)

(3)

Part Number Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Stop

Bandwidth

(MHz)

Insertion

Loss

(dB)

Ripple

(dB)

Spurious

Response

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

SFSCD20M0WF01-R0

20.000 fn±820 min. 3.6 max. (Total)

[within 20dB] 6.0 max.

[at minimum loss point] 2.0 max.

[within 3dB Bandwidth] 34/23 min.

[within 15MHz to fn / fn to 25MHz] 0.4 max.

[within fn±750kHz] 470

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

R1+Rg=R2=Input/Output Impedance, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : No Connect

(4) : Ground

RF

Voltmeter

C2R2

R1

Rg

S.S.G.

(4)

(1)

(3)

(2)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

29

11

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

2.0

1.6

1.2

0.8

0.4

0.0

Frequency (kHz)

Attenuation (dB)

0

4

8

12

16

20

18.000 19.000 20.000 21.000 22.000

G.D.T. (µsec.)

Frequency (kHz)

Attenuation (dB)

16.000 18.000 20.000 22.000 24.000

0

10

20

30

40

50

60

70

80

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

30

12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr MHz SMD Type SFSCE10M7 Series

SFSCE series are chip surface mount filter and

available for 3dB bandwidth at 700kHz to 1.3MHz.

(more than twice width compared with current types)

They have 1.0mm max. thickness and small mounting area.

(4.5x3.8mm)

■ Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.0mm max. thickness, and

have a small mounting area (4.5x3.8mm) enabling

flexible PCB design.

3. Available lead (Pb) free solder reflow.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

■ Applications

1. SS digital communication system

2. Digital wireless audio

3. PHS Evolution system

4. RFID Reader Writer

5. RKE

(3.5)

(in mm)

*

0.4

3.8(1.8)

4.5

(1) (2)

(4) (3)

(4.0)

1.0 max.0.85 0.150.3

(1)

(2)

(3)

(4)

Tolerance unless

otherwise specified : ±0.1

( )

: Input

: Output

: No Connect

: Ground

: EIAJ Monthly Code

: Reference

*

(2.25) 1.1

0.6

0.15

(4-R0.3)

(0.3)

(1)

(4)

(2)

(3)

Part Number Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

Stop

Bandwidth

(MHz)

Insertion

Loss

(dB)

Ripple

(dB)

Spurious

Response

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

SFSCE10M7WF03-R0

10.700 fn±500 min. 2.2 max. (Total)

[within 20dB] 6.0 max.

[at minimum loss point] 2.0 max.

[within 3dB Bandwidth] 30/25 min.

[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.

[within fn±400kHz] 470

SFSCE10M7WF04-R0

10.700 fn±400 min. 1.8 max. (Total)

[within 20dB] 6.0 max.

[at minimum loss point] 1.5 max.

[within 3dB Bandwidth] 35/25 min.

[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.

[within fn±325kHz] 470

SFSCE10M7WF05-R0

10.700 fn±325 min. 1.7 max. (Total)

[within 20dB] 6.0 max.

[at minimum loss point] 1.5 max.

[within 3dB Bandwidth] 40/30 min.

[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.

[within fn±250kHz] 470

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

R1+Rg=R2=Input/Output Impedance, Rg=50Ω

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)

E1 : S.S.G. Output Voltage

(1) : Input

(2) : Output

(3) : No Connect

(4) : Ground

RF

Voltmeter

C2R2

R1

Rg

S.S.G.

(4)

(1)

(3)

(2)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

31

12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

SFSCE10M7WF03-R0

2.0

1.6

1.2

0.8

0.4

0.0

Frequency (MHz)

Attenuation (dB)

G.D.T. (µsec.)

11.10010.3009.500 11.90011.50010.7009.900

0

2

4

6

8

10

SFSCE10M7WF03-R0

Frequency (MHz)

6.700 8.700 10.700 12.700 14.700

Attenuation (dB)

0

20

40

60

80

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

44

13

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case General Use CFULA Series

CFULA series are high selectivity ceramic filters,

which consist of 4 ceramic elements connected in a

ladder form.

Most suitable for digital communications and cellular

phones because of their improved GDT characteristics.

■ Features

1. High selectivity

2. A variety of bandwidths available

3. Excellent GDT characteristics are available within

pass bandwidth.

4. Easily mounted on a printed circuit board

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

3.0±0.3 7.0±0.3

4.2±0.3 7.3±0.3

0.8±0.1

0.6±0.1

1.2±0.5

8.0±0.3

MARKING

EIAJ

CODE

3.3±0.5

2.7±0.3

(1)(2)

(3)

0.3±0.1

1.5 max.

0.15±0.05

Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Input/Output

Impedance

(ohm)

CFULA455KB2A-B0 455.0

±2.0kHz fn±15.0

min. fn±30.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULA455KC2A-B0 455.0

±2.0kHz fn±12.5

min. fn±24.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULA455KD4A-B0 455.0

±1.5kHz fn±10.0

min. fn±20.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULA455KE4A-B0 455.0

±1.5kHz fn±7.5

min. fn±15.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1500

CFULA455KF4A-B0 455.0

±1.5kHz fn±6.0

min. fn±12.5 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFULA455KG1A-B0 455.0

±1.0kHz fn±4.5

min. fn±10.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFULA455KH1A-B0 455.0

±1.0kHz fn±3.0

min. fn±9.0 max.

[within 40dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

Rg

S.S.G.

0dBm

R2 E2 RF Voltmeter

Connection

(1) : Input

(2) : Ground

(3) : Output

(1) (2)

(3)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

45

13

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFULA455KE4A-B0

100

40

30

20

10

0

Attenuation (dB)

0

50

100

150

200

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFULA455KE4A-B0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

46

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Miniaturized Type CFWLA Series

Ceramic filter CFWLA series are low profile high

selectivity ceramic filters which use 6 elements in

ladder form.

They are best suitable to high-class transceivers,

cordless telephones and amateur radios.

■ Features

1. Low profile, high selectivity

2. Available bandwidths are B to J as standard

3. Easily mountable on any PC board

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

0.15

1.5 max.

2.3±0.5 2.0±0.3

2.9±0.3

11.0±0.5

MARKING

EIAJ

CODE

1.2±0.5

(1)(2)

(4) (3)

(5)

1.35±0.5

7.0±0.5

3.5±0.5

0.6±0.1

0.8±0.1

7.5±0.5

2.6±0.3

Connection

(1) : Input

(2)(3)(4) : Ground

(5) : Output

(in mm)

2.92.9——0.30.3

2.9±0.3

Part Number Nominal Center

Frequency (fn)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Ripple

(dB)

Input/Output

Impedance

(ohm)

CFWLA455KBFA-B0 455 fn±15.0

min. fn±30.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 3.0 max.

[within fn±10kHz] 1500

CFWLA455KCFA-B0 455 fn±12.5

min. fn±24.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 3.0 max.

[within fn±8kHz] 1500

CFWLA455KDFA-B0 455 fn±10.0

min. fn±20.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 3.0 max.

[within fn±7kHz] 1500

CFWLA455KEFA-B0 455 fn±7.5

min. fn±15.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 3.0 max.

[within fn±5kHz] 1500

CFWLA455KFFA-B0 455 fn±6.0

min. fn±12.5 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 3.0 max.

[within fn±4kHz] 2000

CFWLA455KGFA-B0 455 fn±4.5

min. fn±10.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2.0 max.

[within fn±3kHz] 2000

CFWLA455KHFA-B0 455 fn±3.0

min. fn±9.0 max.

[within 50dB] 60 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2.0 max.

[within fn±2kHz] 2000

CFWLA455KJFA-B0 455 fn±2.0

min. fn±7.5 max.

[within 50dB] 60 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 2.0 max.

[within fn±1.5kHz] 2000

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

R2 E2 RF Voltmeter

Connection

(1) : Input

(5) : Output

(2)(3)(4) : Ground

Rg

S.S.G.

0dBm

(1)(2) (3) (4)

(5)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

47

14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFWLA455KEFA-B0

100

40

30

20

10

0

Attenuation (dB)

0

100

200

300

400

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFWLA455KEFA-B0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

48

15

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Miniaturized Type CFULB Series

CFULB series ceramic filters are miniature, high

performance ceramic filters composed of piezoelectric

elements connected in a ladder form.

These filters, only 6.3mm high, are 65% the

volume of conventional types. (CFULA455K series)

They are well suited for miniaturizing various kinds

of communications equipment, pocket pagers, car

radios, cordless telephones and mobile telephones.

■ Features

1. Miniature and high selectivity

2. A variety of bandwidths are available

3. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

1.0 max.

1.8±0.3

2.4±0.3

6.5±0.3

0.8±0.3

1.0

±

0.3

6.3±0.3 6.5±0.3

0.5±0.1

0.7±0.1

3.5±0.3

0.7±0.3

(1) (2)

(3) (4)

0.15±0.05

Connection

(1) : Input

(2) : Output

(3) : Ground

(4)

(in mm)

}

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Input/Output

Impedance

(ohm)

CFULB455KB2A-B0 455.0

±2.0kHz fn±15.0

min. fn±30.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULB455KC2A-B0 455.0

±2.0kHz fn±12.5

min. fn±24.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULB455KD4A-B0 455.0

±1.5kHz fn±10.0

min. fn±20.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFULB455KE4A-B0 455.0

±1.5kHz fn±7.5

min. fn±15.0 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1500

CFULB455KF4A-B0 455.0

±1.5kHz fn±6.0

min. fn±12.5 max.

[within 40dB] 27 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFULB455KG1A-B0 455.0

±1.0kHz fn±4.5

min. fn±10.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFULB455KH1A-B0 455.0

±1.0kHz fn±3.0

min. fn±9.0 max.

[within 40dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFULB455KJ1A-B0 455.0

±1.0kHz fn±2.0

min. fn±7.5 max.

[within 40dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

Rg

S.S.G.

0dBm

R2 E2 RF Voltmeter

Connection

(1) : Input

(2) : Output

(3)(4) :Ground

(1) (2)

(3) (4)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

49

15

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFULB455KE4A-B0

100

40

30

20

10

0

Attenuation (dB)

0

50

100

150

200

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

CFULB455KE4A-B0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

50

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case General Use CFWLB Series

CFWLB series ceramic filters are miniature, high

performance ceramic filters composed of piezoelectric

elements connected in a ladder form.

These filters, only 6.3mm high, are 67% the volume

of conventional types. (CFWLB series)

They are well suited for miniaturizing various kinds

of communications equipment, pocket pagers, pagers,

car radios, cordless telephones and mobile telephones.

■ Features

1. Miniature and high selectivity

2. A variety of bandwidths are available.

3. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

1.0 max.

2.7±0.3

2.5±0.3

9.5±0.3

0.7±0.3

1.0±0.3 6.3±0.3 6.5±0.3

0.5±0.1

0.7±0.1

3.5±0.3

0.9±0.3

0.15±0.05

(1)

(3) (4)

(2)

(5)

2.8±0.3 Connection

(1) : Input

(2) : Output

(3)

(4) : Ground

(5)

(in mm)

}

MARKING

EIAJ

CODE

Part Number Nominal Center

Frequency (fn)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

Input/Output

Impedance

(ohm)

CFWLB455KBFA-B0 455 fn±15.0

min. fn±30.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFWLB455KCFA-B0 455 fn±12.5

min. fn±24.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFWLB455KDFA-B0 455 fn±10.0

min. fn±20.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 4.0 max.

[at minimum loss point] 1500

CFWLB455KEFA-B0 455 fn±7.5

min. fn±15.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 1500

CFWLB455KEFA004-B0 455 fn±7.5

min. fn±15.0 max.

[within 60dB] 60 min.

[within fn±15kHz to 30kHz] 5.0 max.

[at fn] 1500

CFWLB455KFFA-B0 455 fn±6.0

min. fn±12.5 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFWLB455KGFA-B0 455 fn±4.5

min. fn±10.0 max.

[within 50dB] 35 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFWLB455KHFA-B0 455 fn±3.0

min. fn±9.0 max.

[within 50dB] 55 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 2000

CFWLB455KJFA-B0 455 fn±2.0

min. fn±7.0 max.

[within 50dB] 55 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 2000

CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

(1) (2)

(3) (4) (5)

R1

R2 E2E1

Rg

S.S.G.

0dBm

RF Voltmeter

Connection

(1) : Input

(3)(4)(5) : Ground

(2) : Output

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

51

16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFWLB455KEFA-B0

100

40

30

20

10

0

Attenuation (dB)

0

50

100

200

G.D.T. (µsec.)

430 455 480

Frequency (kHz)

90

80

70

60

50

150

CFWLB455KEFA-B0

100

40

30

20

10

0

Attenuation (dB)

200 Frequency (kHz)

90

80

70

60

50

300 400 500 600 700 800 900 1000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

52

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series

CFULA_Y series are high selectivity ceramic filters,

which consist of 4 ceramic elements connected in a

ladder form.

Most suitable for digital communications and cellular

phones because of their improved GDT characteristics.

■ Features

1. High selectivity

2. A variety of bandwidths are available.

3. Excellent GDT characteristics are available within

pass bandwidth.

4. Easily mounted on a printed circuit board

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

3.0±0.3 7.0±0.3

4.2±0.3 7.3±0.3

0.8±0.1

0.6±0.1

1.2±0.5

8.0±0.3

MARKING

EIAJ

CODE

3.3±0.5

2.7±0.3

(1)(2)

(3)

0.3±0.1

1.5 max.

0.15±0.05

Connection

(1) : Input

(2) : Ground

(3) : Output

(in mm)

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFULA455KB4Y-B0 455.0

±1.5kHz fn±15.0

min. fn±35.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 5.0 max.

[at minimum loss point] 15.0 max.

[within fn±10kHz] 1500

CFULA455KC4Y-B0 455.0

±1.5kHz fn±12.5

min. fn±30.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 15.0 max.

[within fn±8kHz] 1500

CFULA455KD1Y-B0 455.0

±1.0kHz fn±10.0

min. fn±25.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 20.0 max.

[within fn±7kHz] 1500

CFULA455KE1Y-B0 455.0

±1.0kHz fn±7.5

min. fn±20.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 8.0 max.

[at minimum loss point] 20.0 max.

[within fn±5kHz] 1500

CFULA455KF1Y-B0 455.0

±1.0kHz fn±6.0

min. fn±17.5 max.

[within 40dB] 23 min.

[within fn±100kHz] 9.0 max.

[at minimum loss point] 20.0 max.

[within fn±4kHz] 2000

CFULA455KG1Y-B0 455.0

±1.0kHz fn±4.5

min. fn±15.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 10.0 max.

[at minimum loss point] 20.0 max.

[within fn±3kHz] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

Rg

S.S.G.

0dBm

R2 E2 RF Voltmeter

Connection

(1) : Input

(2) : Ground

(3) : Output

(1) (2)

(3)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

53

17

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFULA455KE1Y-B0

Attenuation (dB)

Frequency (kHz)

Group Delay Time (µsec)

430 455 480

10

20

30

40

50

60

70

80

90

100

200

150

100

50

0

0CFULA455KE1Y-B0

200 300 400 500 600 700 800 900 1000

10

20

30

40

50

60

70

80

90

Attenuation (dB)

Frequency (kHz)

0

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

54

18

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series

CFWLA_Y series are high selectivity ceramic filters,

which consist of 6 ceramic elements connected in a

ladder form.

Most suitable for digital communications and mobile

telephones because of their improved GDT

characteristics.

■ Features

1. High selectivity

2. A variety of bandwidths are available

3. Excellent GDT characteristics are available within

pass bandwidth.

4. Easily mounted on a printed circuit board

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

0.15

1.5 max.

2.3±0.5 2.0±0.3

2.9±0.3

11.0±0.5

MARKING

EIAJ

CODE

1.2±0.5

(1)(2)

(4) (3)

(5)

1.35±0.5

7.0±0.5

3.5±0.5

0.6±0.1

0.8±0.1

7.5±0.5

2.6±0.3

Connection

(1) : Input

(2)(3)(4) : Ground

(5) : Output

(in mm)

2.92.9——0.30.3

2.9±0.3

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFWLA455KB4Y-B0 455.0

±1.5kHz fn±15.0

min. fn±35.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 30.0 max.

[within fn±10kHz] 1500

CFWLA455KC4Y-B0 455.0

±1.5kHz fn±12.5

min. fn±30.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 30.0 max.

[within fn±8kHz] 1500

CFWLA455KD1Y-B0 455.0

±1.0kHz fn±10.0

min. fn±25.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 8.0 max.

[at minimum loss point] 30.0 max.

[within fn±7kHz] 1500

CFWLA455KE1Y-B0 455.0

±1.0kHz fn±7.5

min. fn±20.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 9.0 max.

[at minimum loss point] 30.0 max.

[within fn±5kHz] 1500

CFWLA455KF1Y-B0 455.0

±1.0kHz fn±6.0

min. fn±17.5 max.

[within 50dB] 40 min.

[within fn±100kHz] 10.0 max.

[at minimum loss point] 40.0 max.

[within fn±4kHz] 2000

CFWLA455KG1Y-B0 455.0

±1.0kHz fn±4.5

min. fn±15.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 11.0 max.

[at minimum loss point] 40.0 max.

[within fn±3kHz] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

R2 E2 RF Voltmeter

Connection

(1) : Input

(5) : Output

(2)(3)(4) : Ground

Rg

S.S.G.

0dBm

(1)(2) (3) (4)

(5)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

55

18

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFWLA455KE1Y-B0

Attenuation (dB)

430 455 480

Frequency (kHz)

10

20

30

40

50

60

70

80

90

100

400

300

200

100

0

Group Delay Time (µsec)

0CFWLA455KE1Y-B0

200 300 400 500 600 700 800 900 1000

10

20

30

40

50

60

70

80

90

Attenuation (dB)

Frequency (kHz)

0

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

56

19

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series

Ceramic filter CFULB_Y series are miniature and high

performance filters. These filters, only 6.3mm

high, are 65% the volume of conventional types

(CFULA455K_Y series).

Well suited for miniaturizing communications

equipment, especially for a cellular phone.

■ Features

1. Miniature, flat GDT characteristics

2. Suitable for a cellular phone

3. A variety of bandwidths are available.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

1.0 max.

1.8±0.3

2.4±0.3

6.5±0.3

0.8±0.3

1.0

±

0.3

6.3±0.3 6.5±0.3

0.5±0.1

0.7±0.1

3.5±0.3

0.7±0.3

(1) (2)

(3) (4)

0.15±0.05

Connection

(1) : Input

(2) : Output

(3) : Ground

(4)

(in mm)

}

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFULB455KB4Y-B0 455.0

±1.5kHz fn±15.0

min. fn±35.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 5.0 max.

[at minimum loss point] 15.0 max.

[within fn±10kHz] 1500

CFULB455KC4Y-B0 455.0

±1.5kHz fn±12.5

min. fn±30.0 max.

[within 40dB] 25 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 15.0 max.

[within fn±8kHz] 1500

CFULB455KD1Y-B0 455.0

±1.0kHz fn±10.0

min. fn±25.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 20.0 max.

[within fn±7kHz] 1500

CFULB455KE1Y-B0 455.0

±1.0kHz fn±7.5

min. fn±20.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 8.0 max.

[at minimum loss point] 20.0 max.

[within fn±5kHz] 1500

CFULB455KF1Y-B0 455.0

±1.0kHz fn±6.0

min. fn±17.5 max.

[within 40dB] 23 min.

[within fn±100kHz] 9.0 max.

[at minimum loss point] 20.0 max.

[within fn±4kHz] 2000

CFULB455KG1Y-B0 455.0

±1.0kHz fn±4.5

min. fn±15.0 max.

[within 40dB] 23 min.

[within fn±100kHz] 10.0 max.

[at minimum loss point] 20.0 max.

[within fn±3kHz] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

E1

R1

Rg

S.S.G.

0dBm

R2 E2 RF Voltmeter

Connection

(1) : Input

(2) : Output

(3)(4) :Ground

(1) (2)

(3) (4)

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

57

19

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFULB455KE1Y-B0

Attenuation (dB)

Frequency (kHz)

Group Delay Time (µsec)

430 455 480

10

20

30

40

50

60

70

80

90

100

200

150

100

50

0

0CFULB455KE1Y-B0

200 300 400 500 600 700 800 900 1000

10

20

30

40

50

60

70

80

90

Attenuation (dB)

Frequency (kHz)

0

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

58

20

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series

Ceramic filter CFWLB_Y series are miniature and

high-performance filters. These filters, only

6.3mm high, are 67% the volume of conventional types

(CFWLA455K_Y series).

Well suited for miniaturizing communications

equipment, especially for a cellular phone.

■ Features

1. Miniature, flat GDT characteristics

2. Suitable for a cellular phone

3. A variety of bandwidths are available.

4. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

4.3±0.3

1.0 max.

2.7±0.3

2.5±0.3

9.5±0.3

0.7±0.3

1.0±0.3 6.3±0.3 6.5±0.3

0.5±0.1

0.7±0.1

3.5±0.3

0.9±0.3

0.15±0.05

(1)

(3) (4)

(2)

(5)

2.8±0.3 Connection

(1) : Input

(2) : Output

(3)

(4) : Ground

(5)

(in mm)

}

MARKING

EIAJ

CODE

Part Number Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Stop

Bandwidth

(kHz)

Stop Band

Attenuation

(dB)

Insertion

Loss

(dB)

GDT Deviation

(µs)

Input/Output

Impedance

(ohm)

CFWLB455KB4Y-B0 455.0

±1.5kHz fn±15.0

min. fn±30.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 6.0 max.

[at minimum loss point] 30.0 max.

[within fn±10kHz] 1500

CFWLB455KC4Y-B0 455.0

±1.5kHz fn±12.5

min. fn±27.5 max.

[within 50dB] 40 min.

[within fn±100kHz] 7.0 max.

[at minimum loss point] 30.0 max.

[within fn±8kHz] 1500

CFWLB455KD1Y-B0 455.0

±1.0kHz fn±10.0

min. fn±25.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 8.0 max.

[at minimum loss point] 30.0 max.

[within fn±7kHz] 1500

CFWLB455KE1Y-B0 455.0

±1.0kHz fn±7.5

min. fn±20.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 9.0 max.

[at minimum loss point] 30.0 max.

[within fn±5kHz] 1500

CFWLB455KF1Y-B0 455.0

±1.0kHz fn±6.0

min. fn±17.5 max.

[within 50dB] 40 min.

[within fn±100kHz] 10.0 max.

[at minimum loss point] 40.0 max.

[within fn±4kHz] 2000

CFWLB455KG1Y-B0 455.0

±1.0kHz fn±4.5

min. fn±15.0 max.

[within 50dB] 40 min.

[within fn±100kHz] 11.0 max.

[at minimum loss point] 40.0 max.

[within fn±3kHz] 2000

Center frequency (fo) defined by the center of 6dB bandwidth.

(fn) means nominal center frequency 455kHz.

CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

(1) (2)

(3) (4) (5)

R1

R2 E2E1

Rg

S.S.G.

0dBm

RF Voltmeter

Connection

(1) : Input

(3)(4)(5) : Ground

(2) : Output

Rg+R1=R2=Input/Output Impedance

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

59

20

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Frequency Characteristics

CFWLB455KE1Y-B0

Attenuation (dB)

430 455 480

Frequency (kHz)

10

20

30

40

50

60

70

80

90

100

200

150

100

50

0

Group Delay Time (µsec)

0CFWLB455KE1Y-B0

200 300 400 500 600 700 800 900 1000

10

20

30

40

50

60

70

80

90

Attenuation (dB)

Frequency (kHz)

0

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

61

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

kHz Type Ceramic Discriminators

Ceramic discriminator consists of wide band

piezoelectric resonator.

It is ideal for mobile communications equipment due to

its small size and light weight.

Standard line include products for wide range of

applications, from cordless telecom to cellular

telephone. It helps to realize adjustment free at

detection circuit and down sizing.

■ Features

1. Small in size and light weight

2. Adjustment free at detection circuit

3. High sensitivity and stability

4. Wide range of standard products are available for

various ICs.

5. Operating temperature range: -20 to +80 (degree C)

Storage temperature range: -40 to +85 (degree C)

MARKING

EIAJ

CODE

6.6±0.3

1.5±0.3

6.0±0.2

1.15±0.2

1.0±0.1

3.7±0.2

3.1 max.

6.2±0.2

(in mm)

CDBKB Series

0.25±0.05

5.0±0.2 (in mm)

MARKING

EIAJ

CODE

3.5±0.5 9.0±0.3 3.5±0.3

1.5 max.

0.1±0.05

1.75±0.5

0.8±0.1

1.1±0.1

7.0±0.3

CDBLA Series

(in mm)

MARKING

EIAJ

CODE

0.6±0.2

1.8±0.2

6.3 max.

4.2±0.2

6.0±0.2

0.5±0.1 0.15±0.05

0.9±0.2

3.0±0.3

6.0 max.

4.2±0.5

CDBLB_CAX Series

(in mm)

MARKING

EIAJ

CODE

1.5±0.3

1.0±0.3

0.5±0.2

6.3 max.

4.2±0.2

6.0±0.2

0.5±0.1 0.15±0.05

0.9±0.2

3.0±0.3

6.0 max.

4.2±0.5

CDBLB_CAY Series

Specified by Impedance Characteristics (Type 1)

Part Number Nominal Center

Frequency (fn)

(kHz)

Inclination of

Impedance Curve(1) Inclination of

Impedance Curve(2) Capacitance

(C) IC IC Maker Type

CDBLB455KCAX02-B0 455 447.0±1.5kHz

(at |Z|=2.05kohm) 463.0±1.5kHz

(at |Z|=10.0kohm) 140pF±20% TA8104F TOSHIBA Lead

CDBLB455KCAX31-B0 455 447.0±1.5kHz

(at |Z|=2.05kohm) 463.0±1.5kHz

(at |Z|=10.0kohm) 140pF±20% TA31141 TOSHIBA Lead

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

62

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Impedance Curve

CDBLB455KCAX02-B0

500K

180

50K 90

10K

5K 0

1K

500 −90

100 −180

Impedance (Ω)

Phase (deg)

400 420 440 460 480

Frequency (kHz) 500

100K

50

CDBLB455KCAX31-B0

500K

180

50K 90

10K

5K 0

1K

500 −90

100 −180

Impedance (Ω)

Phase (deg)

400 420 440 460 480

Frequency (kHz) 500

100K

50

Specified by Impedance Characteristics (Type 2)

Part Number Nominal Center

Frequency (fn)

(kHz)

Anti-resonant

Frequency (Fa) Delta F

(Fa-Fr) Resonant

Resistance (R) Capacitance

(C) IC IC Maker Type

CDBKB455KCAX33-R0 - 458.0±1.5kHz 42±4.0kHz 300ohm max. 280pF±20% CXA1474 SONY SMD

CDBLA455KCAY03-B0 - 455.0±1.5kHz 48±5.0kHz 70ohm max. 600pF±20% CXA1184 SONY Lead

CDBLB455KCAY03-B0 - 455.0±1.5kHz 46±5.0kHz 70ohm max. 550pF±20% CXA1184M SONY Lead

CDBLB455KCAX15-B0 - 463.5±1.0kHz 43±2.0kHz 300ohm max. 140pF±20% CXA1183M SONY Lead

CDBLB455KCAX25-B0 455 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1484 SONY Lead

CDBLB455KCAX33-B0 455 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1474 SONY Lead

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Impedance Curve

CDBLA/CDBLB455KCAY03-B0

100K

180

5K

90

1K

500

0

100

50

−90

−180

Impedance (Ω)

380 400 420 440 460

Frequency (kHz) 480

10K

10

50K

Phase (deg)

CDBLB455KCAX15-B0

500K

180

50K 90

10K

5K 0

1K

500 −90

100 −180

Impedance (Ω)

Phase (deg)

390 410 430 450 470

Frequency (kHz) 490

100K

50

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

63

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Impedance Curve

CDBLB455KCAX25-B0

500K 180

50K 90

10K

5K 0

1K

500 −90

100

−180

Impedance (Ω)

Phase (deg)

400 420 440 460 480

Frequency (kHz) 500

100K

50

CDBKB455KCAX33-R0

500K

100K

10K

Impedance (Ω)

Phase (deg)

400 420 440 460 480 500

Frequency (kHz)

500

50

180

50K 90

5K 0

−90

1K

−180

100

CDBLB455KCAX33-B0

500K

100K

10K

Impedance (Ω)

Phase (deg)

400 420 440 460 480 500

Frequency (kHz)

500

50

180

50K 90

5K 0

−90

1K

−180

100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

64

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Specified by Recovered Audio Characteristics

Part Number Nominal Center

Frequency (fn)

(kHz)

Recovered

Audio 3dB BW

(kHz)

Recovered

Audio Output

(mV)

Distortion

(at fn)

(%)

Distortion

(%) IC IC Maker Type

CDBKB455KCAY07-R0

455 fn±4.0 min. 350 ±60 3.0 max. - MC3357 MOTOROLA SMD

CDBKB455KCAY09-R0

455 fn±4.0 min. 120 ±40 1.5 max. - NE604N PHILIPS SMD

CDBKB455KCAY13-R0

455 fn±4.0 min. 330 ±50 4.0 max. - CXA1003BM SONY SMD

CDBKB455KCAY16-R0

455 fn±4.0 min. 175 ±40 2.0 max. - MC3372 MOTOROLA SMD

CDBKB455KCAY24-R0

455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA SMD

CDBKB455KCAY27-R0

455 fn±4.0 min. 90 ±30 2.0 max. - TK10487 TOKO SMD

CDBKB455KCAY28-R0

455 fn±4.0 min. 40 ±20 3.0 max. - TA31142F TOSHIBA SMD

CDBKB455KCAY29-R0

455 fn±4.0 min. 100 ±30 2.5 max. - NE605 PHILIPS SMD

CDBKB455KCAY35-R0

455 fn±4.0 min. 100 ±40 2.5 max. - TK10930 TOKO SMD

CDBKB455KCAY40-R0

455 fn±4.0 min. 40 ±20 3.5 max. - TA31145 TOSHIBA SMD

CDBKB455KCAY49-R0

455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA SMD

CDBKB455KCAY50-R0

455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY SMD

CDBKB455KCAY66-R0

455 fn±4.2 min. 40 ±10 4.0 max. - NJM2590 JRC SMD

CDBKB455KCLX36-R0

455 fn±13.0 min. 90 ±30 2.5 max. 5.0 max.

[within fn ±6kHz] NE(SA)606

/NE(SA)616 PHILIPS SMD

CDBKB455KCLX39-R0

455 fn±11.0 min. 130 ±20 2.5 max. 7.0 max.

[within fn ±8kHz] NE607

/NE617 PHILIPS SMD

CDBKB455KCLY13-R0

455 fn±13.0 min. 120 ±30 1.5 max. 5.0 max.

[within fn ±8kHz] CXA1003BM SONY SMD

CDBLA455KCAY07-B0

455 fn±4.0 min. 340 ±60 2.5 max. - MC3357 MOTOROLA Lead

CDBLA455KCAY09-B0

455 fn±5.0 min. 100 min. 1.5 max. - NE604N PHILIPS Lead

CDBLA455KCAY13A-B0

455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead

CDBLA455KCAY16-B0

455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead

CDBLA455KCAY24-B0

455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead

CDBLA455KCAY28-B0

455 fn±4.0 min. 40 ±20 3.0 max. - TA31142 TOSHIBA Lead

CDBLA455KCAY34-B0

455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead

CDBLA455KCLY09-B0

455 fn±15.0 min. 70 ±20 1.5 max. 3.5 max.

[within fn ±8kHz] NE604N PHILIPS Lead

CDBLA455KCLY13-B0

455 fn±15.0 min. 110 ±30 1.5 max. 5.0 max.

[within fn ±8kHz] CXA1003BM SONY Lead

CDBLB455KCAY07-B0

455 fn±4.0 min. 340 ±60 3.0 max. - MC3357 MOTOROLA Lead

CDBLB455KCAY13A-B0

455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

65

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Number Nominal Center

Frequency (fn)

(kHz)

Recovered

Audio 3dB BW

(kHz)

Recovered

Audio Output

(mV)

Distortion

(at fn)

(%)

Distortion

(%) IC IC Maker Type

Continued from the preceding page.

CDBLB455KCAY24-B0

455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead

CDBLB455KCAY28-B0

455 fn±4.0 min. 40 ±20 3.0 max. - TA31142FN TOSHIBA Lead

CDBLB455KCAY34-B0

455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead

CDBLB455KCAY40-B0

455 fn±4.0 min. 40 ±20 3.0 max. - TA31145 TOSHIBA Lead

CDBLB455KCAY42-B0

455 fn±4.0 min. 40 ±15 3.0 max. - TK14590

/TK14591 TOKO Lead

CDBLB455KCAY49-B0

455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA Lead

CDBLB455KCAY50-B0

455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY Lead

CDBLB455KCLY09-B0

455 fn±15.0 min. 70 ±20 1.5 max. 3.5 max.

[within fn ±8kHz] NE604N PHILIPS Lead

CDBLB455KCLY13-B0

455 fn±15.0 min. 110 ±30 1.5 max. 5.0 max.

[within fn ±8kHz] CXA1003BM SONY Lead

CDBLB455KCAX16-B0

455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead

CDBLB455KCAX18-B0

455 fn±3.0 min. 180 ±40 2.0 max. - MC3371 MOTOROLA Lead

CDBLB455KCAX36-B0

455 fn±3.5 min. 100 ±25 3.5 max. - NE606

/616 PHILIPS Lead

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

MC3357

AF output

Vcc

0.1µ

0.01µ

C

RX

0.022µ

FM S. S. G.

(Rg = 50Ω)

16 915 14 13 12 11 10

1 82 3 4 5 6 7

8.2k

10k

MC3357

50

0.1µ

+

10µ

47k

CDBLA455KCAY07-B0

CDBLB455KCAY07-B0

CDBKB455KCAY07-R0

Part Number (X) C R

150pF

1.5kΩ

1.3kΩ

Unit C

R : F

: Ω

NE604N

16

AF output

Vcc

0.1µ

47µ

C

R

X

100p

0.1µ

100p

IF input

915 14 13 12 11 10

1 82 3 4 5 6 7

0.01µ

0.1µ

+

1000p L

0.01µ

NE604

CDBLA455KCAY09-B0

CDBKB455KCAY09-R0

Part Number (X) C R

CDBLA455KCLY09-B0

CDBLB455KCLY09-B0 120pF 560Ω

L

220µH

120pF 1.8kΩ −

Unit C : F

R : Ω

CXA1003BM

24

AF output

Vcc

0.01µ

C

RX

0.01µ

100µ

CXA1003BM

2700p

51k

0.01µ

0.01µ0.01µ0.01µ

L

100µ

0.01µ

1314151617181920212223

1 12111098765432

0.01µ

CDBLA455KCAY13A-B0

CDBLB455KCAY13A-B0

CDBKB455KCAY13-R0

Part Number (X) C R

82pF

1.2kΩ

1.0kΩ

CDBLA455KCLY13-B0

CDBLB455KCLY13-B0

CDBKB455KCLY13-R0 82pF 560Ω

L

220µH

−

IF input

Unit C : F

R : Ω

MC3372

AF output

Unit C : F

R : Ω

Vcc

16 15 14 13 12 11 10 9

1 2 3 4 5 6 7 8

0.01µ51 51k 0.1µ510k 8.2k

0.01µ

R

51k

1.8k

0.1µC

0.01µ

0.1µ

(Rg = 50Ω)

FM S. S. G

220p

68p

MC3372

X

CDBLA455KCAX16-B0

CDBLB455KCAX16-B0

CDBKB455KCAY16-R0

Part Number (X) C R

100pF

27pF

100pF

1.3kΩ

4.3kΩ

1.0kΩ

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

66

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

MC3371

AF output

Unit C

R : F

: Ω

RF input

16 915 14 13 12 11 10

1 82 3 4 5 6 7

0.01µ51 51k 0.1µ510k 8.2k

0.01µ

0.1µ

0.01µ

IF input

68p 220p RX

Test condition

Vcc = +6.0V

R = 6.2kΩ

X : CDBLB455KCAX18-B0

MC3371

Vcc

TA31136

AF output

Vcc

(+2.0V)

10µ+X R 1µ

0.01µ

C

0.1µ

0.01µ

0.1µ

10µ+

+

TA31136F

16 915 14 13 12 11 10

1 82 3 4 5 6 7

IF input CDBLA455KCAY24-B0

CDBLB455KCAY24-B0

CDBKB455KCAY24-R0

Part Number (X) C R

91pF

1.5kΩ

1.2kΩ

Unit C : F

R : Ω

TK10487

20 19 18 17 16 15 14 13 12

1

R

C

2k

Vcc

TK10487

0.01µ

10µ

+

0.1µ

0.01µ

8.2k

2 3 4 5 6 7 8 9

11

10

X

CDBKB455KCAY27-R0

Part Number (X) C R

33pF 1.0kΩ

Unit C : F

R : Ω

TA31142

20

AF

output

Vcc

111213141516171819

1 1098765432

430 +2.2µVcc

560p 68k 68k 3300p

68k

0.01µ

R

10µ

IF input

0.01µ

0.1µ

10µ

+

10µ0.1µ

2SC1048

0.01µ

TA31142F

X

C

Vcc

CDBLA455KCAY28-B0

CDBLB455KCAY28-B0

CDBKB455KCAY28-R0

Part Number (X) C R

22pF

3.3kΩ

2.7kΩ

Unit C : F

R : Ω

NE605

20

AF output

Vcc

+

0.1µ

0.01µ

C

0.1µ

R

X

0.1µ

150p

5n

0.1µ

100k

22k

0.1µ22µ

NE605

111213141516171819

1 1098765432

IF input

100k

CDBKB455KCAY29-R0

Part Number (X) C R

56pF 2.2kΩUnit C : F

R : Ω

MC13136

24

1

23

2

22

3

21

4

20

5

19

6

18

7

17

8

16

9

15

10

14

11

13

12

R

X

C

Vcc

MC13136

0.01µ

0.15µ

1k

0.1µ

IF input

AF input

0.1µ0.1µ

0.1µ

+

CDBLA455KCAY34-B0

CDBLB455KCAY34-B0

Part Number (X) C R

100pF 1.2kΩUnit C

R : F

: Ω

TK10930

24

1

23

2

22

3

21

4

20

5

19

6

18

7

17

8

16

9

15

10

14

11

13

12

R2

R1 CX

Vcc

AF

output

IF input

TK10930

0.01µ

0.1µ

10µ

+

0.1µ

8.2k

CDBKB455KCAY35-R0

Part Number (X) R1 R2

2.0kΩ1.0kΩ

C

33pF

Unit C : F

R : Ω

NE(SA)606/616

20

1

19

2

18

3

17

4

16

5

15

6

14

7

13

8

12

9

11

10

R

X

L

IF input

AF output

C

20k

2k

8.2k

Vcc

NE606 or NE616

0.1µ

0.1µ0.1µ

0.01µ

0.1µ0.1µ

2.2µ

+

2.2µ

+

CDBLB455KCAX36-B0

CDBKB455KCLX36-R0

Part Number (X) C R

22pF

27pF 4.7kΩ

2.2kΩ

L

−

1mH Unit C : F

R : Ω

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

67

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

NE(SA)607/617

20

AF output

Vcc

0.1µ

0.01µ

C

R

X

L

0.1µ

0.01µ

51

IF input

1119 18 17 16 15 14 13 12

1 1023456789

22k

1.5k

NE607/617 (PHILIPS)

8.2k

+10µ

0.1µ0.1µ

CDBKB455KCLX39-R0

Part Number (X) C R

22pF 2.7kΩL

1mH

Unit C : F

R : Ω

L : H

TA31145

AF output

0.1µ

R

X

0.1µ

1000p

100k

10µ

IF input

3300p

Vcc

0.1µ

20

++

10µ

5600p

100k

+

2.2µ430

+

0.01

µ68k

68k

560p

TA31145 (TOSHIBA)

1119 18 17 16 15 14 13 12

1 102 3 4 5 6 7 8 9

CDBLB455KCAY40-B0

CDBKB455KCAY40-R0

Part Number (X) R

3.3kΩ

2.7kΩ

Unit C : F

R : Ω

TK14590/14591

AF

output

Vcc

(1.3V)

0.1µ

0.01µ

C

R

0.0033µ

100k

X

IF input

24 1314151617181920212223

1 12111098765432

100k

8.2k

0.01µ

560p

100k

0.1µ

0.01µ

1µ

TK14590V (TOKO)

0.01µ

0.15µ

100k

CDBLB455KCAY42-B0 3.3kΩ

Part Number (X) C R

22pF

Unit C : F

R : Ω

MC3361

47µ0.01µ0.1µ

Vcc

16 15 14 13 12 11 10 9

1 2 3 4 5 6 7

1µ

22

MC3361

100p 1000p

0.1µ

150k 100k

AF output

1k

RX

IF input

0.022µ

0.1µ0.1µ

8

Part Number (X)

CDBLB455KCAY49-B0

CDBKB455KCAY49-R0

R

1.8kΩ

1.5kΩ

Unit C

R : F

: Ω

CXA3117

24 22 20 19 16 15 14 13172123

1 3 5 6 9 10 11 128742

1200p

1µ

33µ0.01µ

1200p

R

X

AF out

Vcc

CXA3117(SONY)

18

Part Number (X)

CDBLB455KCAY50-B0

CDBKB455KCAY50-R0

R

8.2kΩ

6.2kΩ

Unit C

R : F

: Ω

NJM2590

Part Number (X)

CDBCB455KCAY66-R0

R

3.0kΩ

Unit C

R : F

: Ω

R X

10µ

S.G.

Vcc

0.1µ

51

0.1µ

AF output

10µ

10k

100k 100k

0.01µ

+

1 2 3 456 7

11

12

1314 8

910

NJM2590(JRC)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

68

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Recovered Audio Curve

CDBKB455KCAY07-R0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLA/CDBLB455KCAY07-B0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBKB455KCAY09-R0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLA455KCAY09-B0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLA/CDBLB455KCLY09-B0

500

AF Output Voltage (mV)

T.H.D. (%)

395 435 475 515

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBKB455KCAY13-R0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

69

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDBKB455KCLY13-R0

AF Output Voltage (mV)

425 445 465 485

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLA/CDBLB455KCAY13A-B0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLA/CDBLB455KCLY13-B0

500

AF Output Voltage (mV)

T.H.D. (%)

395 435 475 515

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBKB455KCAY16-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLA455KCAY16-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLB455KCAX16-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

70

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDBLB455KCAX18-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY24-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLA/CDBLB455KCAY24-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY27-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY28-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLA/CDBLB455KCAY28-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

71

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDBKB455KCAY29-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBLA/CDBLB455KCAY34-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY35-R0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCLX36-R0

AF Output Voltage ( mV )

T.H.D. (%)

Frequency ( kHz )

1

10

100

500

425 445 465 486

0.1

0.5

5

50

5

50

1

10

CDBLB455KCAX36-B0

AF Output Voltage (mV)

440 450 460 470

Frequency (kHz)

500

100

50

10

5

1

T.H.D. (%)

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCLX39-R0

Frequency (kHz)

425 445 465 485

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

AF Output Voltage (mV)

T. H. D. (%)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

72

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDBKB455KCAY40-R0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLB455KCAY40-B0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBLB455KCAY42-B0

500

AF Output Voltage (mV)

T.H.D. (%)

440 450 460 470

Frequency (kHz)

50.0

100 10.0

50 5.0

10 1.0

5 0.5

1 0.1

CDBKB455KCAY49-R0

Frequency (kHz)

AF Output Voltage (mV)

T. H. D. (%)

440 450 460 470

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

CDBLB455KCAY49-B0

Frequency (kHz)

AF Output Voltage (mV)

T. H. D. (%)

440 450 460 470

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY50-R0

Frequency (kHz)

AF Output Voltage (mV)

T. H. D. (%)

440 450 460 470

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

73

21

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Recovered Audio Curve

CDBLB455KCAY50-B0

Frequency (kHz)

AF Output Voltage (mV)

T. H. D. (%)

440 450 460 470

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

CDBKB455KCAY66-R0

Frequency (kHz)

AF Output Voltage (mV)

T. H. D. (%)

440 450 460 470

500

100

50

10

5

1

50.0

10.0

5.0

1.0

0.5

0.1

Specified by S Curve Characteristics

Part Number Nominal Center

Frequency (fn)

(kHz)

S Curve (1)

Output Volt. at fn

(mV)

S Curve (2)

at fn±4.8kHz

(mV) IC IC Maker Type

CDBKB455KCAY54-R0 455 165 ±20 170 ±20 TA31149 TOSHIBA SMD

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.

■ Test Circuit

TA31149

24 22 16 15

1 3 5 9742

1000p

10µ

0.1µ

10µ

1000p

100k

0.1µ

R

X

AF output

1200p

1500p

Vcc (W1.4V)

TA31149(TOSHIBA)

12118 106

IF

input

17

2.2µ

430

23 21 20

Vcc

100k

Vcc

100k

Vcc

19 18 14 13

+

Part Number (X)

CDBKB455KCAY54-R0

R

2.7kΩ

Unit C : F

R : Ω

■ S Curve

CDBKB455KCAY54-R0

440 450 460 470

0.0

0.1

0.2

0.3

0.4

Frequency (kHz)

Volt (V)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

74

22

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment

MHz Type Ceramic Discriminators

CDSCB10M7 series forms a resonator on a piezoelectric

ceramic substrate. In combination with ICs, this type

obtains stable demodulation characteristics in a wide

bandwidth.

They have 1.0mm max. thickness and small mounting area

(4.5x2.0mm).

■ Features

1. Compact and high reliability and recommended for

automotive applications.

2. Can be combined with various ICs. The IC is

determined by the last number in the part number.

3. Stable demodulation characteristics can be

obtained without adjustment.

4. Stable temperature characteristics

5. Recommended for Pb free soldering

4.1 max.

1.0 max.

4.5±0.1

0.2±0.2

2.0±0.1

0.3±0.2

0.4(ref.) 0.4(ref.)

1.4 max.

0.4±0.05

1.5±0.1

0.8±0.10.8±0.1

1.5±0.1 (in mm)

CDSCB Series

Part Number Center Frequency (fo)

(MHz)

Recovered Audio

3dB BW

(kHz)

Recovered Audio

Output

(mV)

Distortion

(%) IC

CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. TEA5757HL

CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. TA2154FN

CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. TRF6901

CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. LV23100V

CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. TA31161

CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. TK14588V

(fn) means nominal center frequency.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

■ Test Circuit

CDSCB10M7GA105A-R0

48 41424344454647

13

12 20191817161514

4.7µ

X

150

S.S.G.

Vcc (3.0V)

0.1µ

0.47µ

TEA5757HL

(PHILIPS)

+

40

21

39

22

38

23

37

24

X : CDSCB10M7GA105A-R0

0.1µ

0.1µ10µ

100µ

10

100k

+

AFC (n)

AFC (p)

AF OUT

DC OUT

330p

0.22µ

11

10

9

8

7

6

5

4

3

2

1

25

26

27

28

29

30

31

32

33

34

35

36

0.1µ

Unit C

R: F

: Ω

CDSCB10M7GA113-R0

30 23242526272829

1 8765432

2.2µ

D.C. OUT

S.S.G.

Vcc (1.2V)

AF OUT

0.01µ

680p

TA2154FN (TOSHIBA)

+

22

9

21

10

20

11

19

12

18

13

17

14

16

15

X : CDSCB10M7GA113-R0

0.01µ

X

Unit C

R: F

: Ω

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

75

22

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Test Circuit

CDSCB10M7GA119-R0

0.01µ

0.01µ0.47µ

2.2µ0.1µ

0.1µ

0.22µ

4.7µ

120p

220k

68p

15p 82p

47p

1000p

100p

10k

1k

+

10

IF Input AF Output

Vcc (3.0V)

(TEXAS INSTRUMENTS)

TRF6901

PIC16F84

X

Unit C

R

L

: F

: Ω

: H

+

X : CDSCB10M7GA119-R0

1

2

3

4

5

6

7

8

9

10

11

12

36

35

34

33

32

31

30

29

28

27

26

25

13 14 15 16 17 18 19 20 21 22 23 24

48 47 46 45 44 43 42 41 40 39 38 37

18 17 16 15 14 13 12 11 10

1 2 3 4 5 6 7 8 9

CDSCB10M7GA121-R0

0.47µ

0.01µ

AF Output D.C. Output

LV23100V (SANYO)

PIC16F84 (Control IC)

10k

Vcc (3.2V)

1µ

0.047µ

2.2µ0.1µ

1k

0.047µ10k75

0.015µ0.01µ

100µ

10p

100p

10p

22µ

10µ

3.3k

+

1µ

+

S.G.

X

Unit C

R: F

: Ω

X : CDSCB10M7GA121-R0

36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19

1 2 3 4 5 6 7 98 10 11 12 13 14 15 16 17 18

18

1

17

2

16

3

15

4

14

5

13

6

12

7

10

9

11

8

CDSCB10M7GF072-R0

16

Vcc (3V)

9101112131415

1 8765432

IF IN

AF OUT

0.01µ

33µ0.01µ

R

10p

4.7µ

X

0.01µ

+

TA31161 (TOSHIBA)

X : CDSCB10M7GF072-R0

R : 820 Unit C

R

L

: F

: Ω

: H

CDSCB10M7GF109-R0

0.01µ

Vcc (3V)

12k 51k

1000p

8p

+

S.S.G.

R

D.C. OUT AF OUT

X

0.01µ

4.7µ

51

0.01µ

1.2µ

TK14588V (TOKO)

Unit C

R

L

: F

: Ω

: H

X : CDSCB10M7GF109-R0

R : 820

910111213141516

87654321

■ Frequency Characteristics

CDSCB10M7GA105A-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100 dBµ

= ±75kHz

= 1kHz

= 3.0V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA113-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100 dBµ

= ±75kHz

= 1kHz

= 1.2V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

76

22

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Frequency Characteristics

CDSCB10M7GA119-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100 dBµ

= ±60kHz

= 1kHz

= 3.0V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GA121-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

Input

fdev.

fmod.

Vcc

= 100 dBµ

= ±75kHz

= 1kHz

= 3.2V

1

10

100

1000

10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1

0.1

1

10

100

AF Output

Distortion

CDSCB10M7GF072-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

100 10

1000 100

10 1

1 0.1

10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0

Input =

fdev. =

fmod. =

Vcc =

100dBµ

±80kHz

1kHz

3.0V

CDSCB10M7GF109-R0

AF Output Voltage (mV)

T.H.D. (%)

Frequency (MHz)

1000

100

10

1

100

10

1

0.1

10.3 10.5 10.7 10.9 11.1

Input =

fdev. =

fmod. =

Vcc =

100dBµ

±64kHz

1kHz

3.0V

10.4 10.6 10.8 11.0

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note P05E12.pdf 05.3.15

7

Filters for Communication Equipment

291

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications

before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications.

for IF

SAW Filters

o AMPS/ADC

SAFCG130MCA0T00

(0.20)

1.15max.

1.50±0.13

1.9±0.2

8-0.6±0.08

7-1.00±0.13

3.8±0.2

Dot Marking(ø0.2)

(8)

(1)

(5)

(7)

(6)

(2)

(3)

(4)

4-1.27±0.13

M

Laser Printing

EIAJ Code

Marking :

∗ :

(in mm)

Pin Input

Input (Ground)

Output

Output (Ground)

Ground

(8) :

(6) :

(4) :

(2) :

Others :

∗

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(kHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFCG130MCA0T00 130.380 ±630 min. 5.5 max.

(at fo point) - 310ohm//1.6µH (Input)

310ohm//1.6µH (Output)

SAFCT85M3JB0X05 85.380 ±12 min. 5.5 max.

(at min. loss point) 1.5

(fo±12kHz) 870ohm//-1.8pF (Input)

870ohm//-1.8pF (Output)

Filters for Communication Equipment

o DECT

7.0±0.2

4-1.27±0.15

M

3.5±0.2

9-1.0±0.2

10-0.60±0.15

(0.90)

5.0±0.2

2-2.54±0.15

1.8 max.

1.8±0.2

Dot Marking(ø0.3)

Marking :

∗ : Laser Printing

EIAJ Code

(in mm)

Input

Output

Ground

(9) :

(4) :

Others :

∗

(1)(2)(10) (3)

(4)

(9)

(8) (5)(6)(7)

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(kHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFCT110MCB1T00 110.592 ±576 min. 4.5 max.

(at min. loss point) - 300ohm//1.2µH (Input)

300ohm//1.2µH (Output)

05.11.18

Filters for Communication Equipment

7

Filters for Communication Equipment

292 !Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications

before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications.

o GPS

SAFCC110MCA1T00 (1)

(2)

(3) (4)

(5)

(6)

0.75±0.20

1.50±0.20 5-0.75±0.20

0.75±0.10

6-0.60±0.15

3.0±0.2

0.4±0.1

M

(in mm)

1.15max.

4-1.50±0.15

(0.20)

Dot Marking(ø0.5)

Marking :

∗ : Laser Printing

EIAJ Code

Input

(or Ground)

Output

(or Ground)

Ground

(3) :

(2) :

(6) :

(5) :

Others :

∗

SAFJA35M4WC0Z00R03

2.3

±0.1

2.55

±0.1 1.5

±0.1

2.0 max.

: Electrode

1.0±0.1 0.6±0.2

2.3

±0.1

(6) (5) (4)

(1) (2) (3)

2.5

±0.1 2.5

±0.1

9.6±0.2

35.42C

(1) Input or Ground

(2) Ground

(3) Output

(4) Output or Ground

(5) Ground

(6) Input

M

∗

5.1±0.2

(in mm)

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(MHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFCC110MCA1T00 110.0 ±1.023 min. 3.7 max.

(at min. loss point) 0.6 480ohm//-1.6µH (Input)

650ohm//-1.6µH (Output)

SAFJA35M4WC0Z00R03 35.42

(fn) 1.90 min.

(1dB Bandwidth) 20.5 max.

(at fn) 1.6

(within 34.62 to 36.22MHz) 14.3k ohm//5.1pF (Input)

4k ohm//5.1pF (Output)

SAFJA35M4WC0Z00R10 35.42

(fn) 1.9 min.

(1dB Bandwidth) 20.5 max.

(at fn) 1.6

(within 34.62 to 36.22MHz) 14.3k ohm//5.1pF (Input)

4k ohm//5.1pF (Output)

o PHS

SAFDA243MRD9X00 (1)

(2)

(3) (4)

(5)

(6)

0.75±0.20

1.50±0.20 5-0.75±0.20

0.75±0.10

6-0.60±0.15

3.0±0.2

0.4±0.1

M

(in mm)

0.85 max.

4-1.50±0.15

(0.15)

(0.10)

Dot Marking (ø0.5)

Marking :

∗ : Laser Printing

EIAJ Code

Input

Output

Ground

(3) :

(6) :

Others :

∗

SAFCC243MRB9X00 (1)

(2)

(3) (4)

(5)

(6)

0.75±0.20

1.50±0.20 5-0.75±0.20

0.75±0.10

6-0.60±0.15

(0.10)

3.0±0.2

0.4±0.1

M

(in mm)

1.15 max.

4-1.50±0.15

(0.20)

Dot Marking (ø0.5)

Marking :

∗ : Laser Printing

EIAJ Code

Input

Output

Ground

(3) :

(6) :

Others :

∗

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(kHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFDA243MRD9X00 243.95 ±130 min. 4.5 max.

(at fo point) 1.0

(fo±100kHz) 760ohm//-1.0pF (Input)

760ohm//-0.8pF (Output)

SAFDA265MRD5X00 265.55 ±130 min. 4.5 max.

(at fo point) 1

(fo±100kHz) 740ohm//-1.0pF (Input)

820ohm//-0.9pF (Output)

SAFCC243MRB9X00 243.95 ±130 min. 4.5 max.

(at min. loss point) 1.0

(fo±100kHz) 760ohm//-1.0pF (Input)

760ohm//-0.8pF (Output)

SAFCC265MRB5X01 265.55 ±130 min. 4.5 max.

(at fo point) 1.0

(fo±100kHz) 740ohm//-1.0pF (Input)

820ohm//-0.9pF (Output)

05.11.18

7

Filters for Communication Equipment

293

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications

before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications.

o Wireless LAN

(1) Ground

(2) Ground

(3) Output

(4) Output

(5) Ground

(6) Input

: Electrode

1.0±0.1

2.3

±0.1

9.6±0.2

2.5

±0.1 2.5

±0.1 2.3

±0.1

(1)

0.6±0.2

(2) (3)

(6)

(6) (5) (4)

(1) (2) (3)

(5) (4)

2.55±0.1

1.5±0.1

5.1±0.2

2.0max.

(1) (2) (3)

(6) (5) (4)

(in mm)

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(MHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFJA43M0WC0Z00R03 43.00 ±0.1MHz

(fo) 1.25 min. 21.0 max.

(at fo point) - -

o 5G W-LAN

SAFCD450MCL0N00

(5)

(4)

(6)

(7)

(8)

6-0.75±0.20

4-1.50±0.20

8-0.60±0.15

3.0±0.2

M

1.15 max.

4-1.50±0.15

(0.20)

0.75±0.20

Dot Marking(ø0.5)

Marking :

∗ : Laser Printing

EIAJ Code

(in mm)

Pin Input

Input (Ground)

Output

Output (Ground)

Ground

(3) :

(1) :

(7) :

(5) :

Others :

∗

(1)

(2)

(3)

1.20±0.20

Part Number Center

Frequency

(MHz)

3dB Bandwidth

(MHz) Insertion Loss

(dB) Ripple (dB max.) Input/Output

Impedance

SAFCD450MCL0N00 450 ±8.2 min. 4.5 max.

(at min. loss point) 1.5

(fo±8.2MHz) 200ohm//150nH (Input)

200ohm//150nH (Output)

SAFCD570MCL0N00 570 ±8.5 min.

(2dB Bandwidth) 7.0 max.

(fo±8.5MHz) 2.0

(fo±8.5MHz) 200ohm//100nH (Input)

200ohm//100nH (Output)

Filters for Communication Equipment 05.11.18

Filters for Communication Equipment

7

Filters for Communication Equipment

294 !Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications

before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications.

for IF

BGS Filters

(1)

(2)

(3) (4)

(5)

(6)

0.75±0.20

1.50±0.20 5-0.75±0.20

0.75±0.10

6-0.60±0.15

(0.10)

3.0±0.2

0.4±0.1

M

(in mm)

1.15 max.

4-1.50±0.15

(0.20)

Dot Marking (ø0.5)

Marking :

∗ : Laser Printing

EIAJ Code

Input

Output

Ground

(3) :

(6) :

Others :

∗

Part Number Nominal Center Frequency(fn)

(MHz) 3dB Bandwidth

(MHz)

MKFCC40M0CC0P00R05 40.00 fn±1.75 min.

for IF

Chip LC Filters (Balance-balance Type)

LFB32130MSH3A569 ∗Terminal of "NC1" should be fixed to the no connected pattern.

Terminal of "NC2" should not be fixed to any pattern.

(in mm)

All the technical data and Information contained herein are

subject to change without prior notice.

(1)(3) :

Balance IN

(2)(7) :

NC1

(4)(5)(9)(10) :

NC2

(6)(8) :

Balance OUT

1.5±0.1

0.8±0.1

0.40±0.15

0.4±0.2

0.60±0.15

1.0±0.1

3.2±0.2

(4)

(5)

(1) (2) (3)

(8) (7) (6)

2.5±0.2

0.3±0.2

(10)

(9)

Directional

Input Mark

0.40±0.15

Part Number Nominal Center

Frequency (fo)

(MHz)

Bandwidth (BW)

(MHz) Insertion Loss in BW

(dB)

Input Balance Impedance

(Differential) (Nom.)

(ohm)

Output Balance Impedance

(Differential) (Nom.)

(ohm)

LFB32130MSH3A569 130.38 fo±0.7 5 max. (at 25°C) 1000 250

LFB32166MSH2A570 166.85 fo±0.65 5 max. (at 25°C) 300 300

05.11.18

7

Filters for Communication Equipment

295

!Note • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications

before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications.

for IF

Chip LC Filters (Balance-unbalance Type)

LFB32130MSQ1A552

(in mm)

∗Terminal of "NC1" should be fixed to the no connected pattern.

Terminal of "NC2" should not be fixed to any pattern.

All the technical data and Information contained herein are subject

to change without prior notice.

(1) (2) (3)

(8)

(10)

(9)

(4)

(5)

(7) (6)

3.2±0.2

0.6±0.15

0.4±0.2

0.4±0.15 1.0±0.1

1.5±0.1

2.5±0.2

0.4±0.15

0.3±0.2

0.8±0.1

(1)(3) : Balance IN

(2)(7) : GND

(4)(5)(9)(10) : NC2

(6) : Unbalance OUT

(8) :

NC1 (Biasing terminal)

Part Number Nominal Center

Frequency (fo)

(MHz)

Bandwidth (BW)

(MHz) Insertion Loss in BW

(dB)

Balance Impedance

(Differential) (Nom.)

(ohm)

Unbalance Impedance

(Nom.)

(ohm)

LFB32130MSQ1A552 130.38 fo±0.65 5.5 max. (at 25°C) 1000 50

LFB32166MSQ1A527 166.85 fo±0.7 4 max. (at 25°C) 200 50

Filters for Communication Equipment 05.11.18