P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment 1 CERAFILr kHz SMD Type CFXCE Series * 3.2 CFXCE series are very small and high-efficiency surface mount, ladder type 450/455 kHz ceramic filters "CERAFIL" for IF section. Compared to our previous compact surface mounted 6-element product, this ceramic filter has been significantly downsized to approximately one-third the original volume and reduced to less than 2mm in height. As for electrical performance, this product, which consists of 4 elements, provides stop band attenuation equivalent to that of our previous 6-element product. The input/output impedance characteristics are also equivalent to those of the previous product, and spurious responses in the vicinity of the passing band can now be eliminated. This allows mobile telecommunications equipment manufacturers to easily design the periphery of the IF section and thus greatly enhance the interference suppression capability of the equipment. In addition, this ceramic filter provides flatter group delay time characteristics than the previous product, and will effectively work as a component for data transmission in digital mobile telecommunications systems. (2.9) 3.8 Input terminal marking 0.3 1.2 -0.10 +0.05 (3.5) 1.2 (2) (4) (3) 1.8 4-0.35 4-1.4 4-0.9 (1) (5) (1) : Input (2) : Output (3)(4)(5) : Ground Tolerance unless otherwise specified : 0.1 ( ) : Reference 4-0.35 (in mm) Features 1. Compact, thin, and lightweight Size: 3.8x3.2x1.25mm Weight: 40mg 2. Out-of-band attenuation is increased and spurious responses are greatly decreased. 3. Group delay time characteristics are flattened. 4. Surface mountable, and reflow soldering can be used for mounting. Available lead (Pb) free solder reflow Applications 1. IF filters for PDCs 2. IF filters for various types of pagers 3. IF filters for various types of analog and digital cellular telephones 4. IF filters for radio communication circuits applicable for PDA or PCMCIA 5. IF filters for other general mobile wireless equipment Part Number CFXCE450KCFA-R1 Nominal Center 3dB Stop 6dB Frequency (fn) Bandwidth Bandwidth Bandwidth (kHz) (kHz) (kHz) 450 fn9.0 to 12.0kHz max. - fn35.0 max. [within 50dB] Stop Band Attenuation (dB) 30 min. [at fn25kHz] Stop Band Att.(2) (dB) Stop Band Att.(3) Insertion Loss (dB) (dB) Ripple (dB) GDT Deviation (s) 55 min. 47 min. 6.0 max. 0.5 max. 27.0 max. [within fn40kHz to 50kHz] [within fn100kHz] [at fn] [within fn10.5kHz] [within fn10.5kHz] Spurious:40dB [within 0.1 to 1.0MHz] Input/Output Impedance: 2000 ohm For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 5 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Test Circuit Frequency Characteristics 0 200 R1 5 (1) (2) Rg (5) (4) (3) R2 E2 10 RF Voltmeter 150 15 (1) Input R1 + Rg = R2 = Input/Output Impedance E1 : S.S.G. Output Voltage (2) Output (3)(4)(5) Ground 100 20 25 50 30 35 0 40 425.0 450.0 Frequency (kHz) 6 475.0 G.D.T. (sec.) E1 S.S.G. 0dBm Attenuation (dB) 1 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr kHz SMD Type SFPKA Series 2 7.50.3 The SFPKA series is comprised of small, high performance, economical, thin (5.0mm) filters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as cordless phones, pager and transceivers. MARKING EIAJ CODE 5.0 max. 0.90.1 2.00.3 1.50.3 2.00.3 Features Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) 1.50.3 1.60.3 Connection (1) : Input (2) : Ground (3) : Output (1) (2) (3) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 5.0mm maximum thickness. 4. The bandwidth ranges from D to H. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Part Number 8.4 max. 7.00.3 3.00.3 (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) SFPKA455KD4A-R1 455.0 1.5kHz fn10.0 min. fn20.0 max. 27 min. 4.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn7kHz] 1500 SFPKA455KE4A-R1 455.0 1.5kHz fn7.5 min. fn15.0 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn5kHz] 1500 SFPKA455KF4A-R1 455.0 1.5kHz fn6.0 min. fn12.5 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn4kHz] 1500 SFPKA455KG1A-R1 455.0 1.0kHz fn4.5 min. fn10.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn3kHz] 1500 SFPKA455KH1A-R1 455.0 1.0kHz fn3.0 min. fn9.0 max. 35 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn2kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (3) (1) (2) Rg RF Voltmeter E1 R2 E2 S.S.G. 0dBm Rg+R1=R2=Input/Output Impedance E1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Output 7 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics SFPKA455KE4A-R1 0 10 360 10 20 320 20 30 280 30 40 240 40 50 200 60 160 70 120 70 80 80 80 90 40 90 0 100 200 100 430 455 Frequency (kHz) 8 480 Attenuation (dB) 400 G.D.T. (sec.) Attenuation (dB) 2 SFPKA455KE4A-R1 0 50 60 300 400 500 600 700 Frequency (kHz) 800 900 1000 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr kHz SMD Type CFUKG Series MARKING EIAJ CODE 1.00.1 4.00.3 6.00.3 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from D to G. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) C0.5 1.00.1 1.20.1 4.0 max. 1.00.3 Features Part Number 3 7.5 max. 6.50.3 The CFUKG series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as pocket pagers and cellular phones. (1) 1.00.3 1.50.3 3.00.3 1.50.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFUKG455KD4A-R0 455.0 1.5kHz fn10.0 min. fn20.0 max. 27 min. 4.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn7kHz] 1500 CFUKG455KE4A-R0 455.0 1.5kHz fn7.5 min. fn15.0 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn5kHz] 1500 CFUKG455KF4A-R0 455.0 1.5kHz fn6.0 min. fn12.5 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn4kHz] 1500 CFUKG455KG1A-R0 455.0 1.0kHz fn4.5 min. fn10.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn3kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg E1 S.S.G. 0dBm R2 (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 9 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKG455KE4A-R0 CFUKG455KE4A-R0 0 0 400 10 10 20 20 300 30 40 40 200 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 3 50 60 70 100 80 80 90 90 100 430 455 Frequency (kHz) 10 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment 6.50.3 The CFUKG_X series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. The filters exhibit an extremely flat GDT characteristic combined with a narrow bandwidth. The filters are recommended for narrow band digital communication applications. MARKING EIAJ CODE 1.00.1 7.5 max. CERAFILr kHz SMD Type CFUKG_X Series C0.5 1.00.3 4.00.3 6.00.3 1.00.3 1.50.3 1.50.3 Features (1) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from E to H. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Part Number Stop Bandwidth (kHz) 4 1.20.1 4.0 max. 1.00.1 3.00.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (s) Input/Output Impedance (ohm) CFUKG455KE4X-R0 455.0 1.5kHz fn7.5 min. fn17.5 max. 27 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn5kHz] 25.0 max. [within fn5kHz] 1500 CFUKG455KF4X-R0 455.0 1.5kHz fn6.0 min. fn15.0 max. 27 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn4kHz] 25.0 max. [within fn4kHz] 1500 CFUKG455KG1X-R0 455.0 1.0kHz fn4.5 min. fn12.5 max. 25 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn3kHz] 25.0 max. [within fn3kHz] 1500 CFUKG455KH1X-R0 455.0 1.0kHz fn3.0 min. fn10.0 max. 25 min. 7.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn2kHz] 25.0 max. [within fn2kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg R2 E1 S.S.G. 0dBm (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 11 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKG455KE4X-R0 CFUKG455KE4X-R0 0 0 200 10 10 20 20 150 40 40 100 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 4 30 50 60 70 50 80 80 90 90 100 430 455 Frequency (kHz) 12 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment 6.50.3 The CFUKF series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. The filters exhibit an extremely flat GDT characteristic. The filters are recommended for digital communication applications and are perfect in hand held cellular phones, etc. MARKING EIAJ CODE 1.00.1 4.00.3 6.00.3 5 1.00.3 1.50.3 1.50.3 3.00.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from A to E. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Stop Bandwidth (kHz) 1.20.1 4.0 max. 1.00.3 Features Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) C0.5 1.00.1 (1) Part Number 7.5 max. CERAFILr kHz SMD Type CFUKF Series (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (s) Input/Output Impedance (ohm) CFUKF455KA2X-R0 455.0 2.0kHz fn17.5 min. fn40.0 max. 25 min. 4.0 max. 1.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn12kHz] [within fn12kHz] 1000 CFUKF455KB4X-R0 455.0 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 1.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] [within fn10kHz] 1000 CFUKF455KC4X-R0 455.0 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn8kHz] 15.0 max. [within fn8kHz] 1000 CFUKF455KD1X-R0 455.0 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn7kHz] 20.0 max. [within fn7kHz] 1500 CFUKF455KE1X-R0 455.0 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn5kHz] 20.0 max. [within fn5kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg R2 E1 S.S.G. 0dBm (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 13 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKF455KE1X-R0 CFUKF455KE1X-R0 0 0 200 10 10 20 20 30 40 40 100 50 60 70 Attenuation (dB) 5 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 50 80 80 90 90 100 14 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment MARKING 6.5 The CFWKA series is comprised of small, high performance, thin (3.0mm) filters consisting of 6 ceramic elements. The filters are recommend for pager or hand held cellular phones. EIAJ CODE Dot marking Sealing 1.20.1 1.20.1 3.0max. Features 5.5 3.0 1.50.3 11.5 3.0 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered. 3. They are slim, at only 3.0mm maximum thickness. 4. The filters are wide bandwidth, flat GDT within pass band. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Nominal Center 3dB Frequency (fn) Bandwidth (kHz) (kHz) Part Number 7.5 max. CERAFILr kHz SMD Type CFWKA Series (1) (4) C0.3 1.20.1 1.20.1 5.5 3.0 1.50.3 Sealing 6 (1) : Input (2) : Output (3)(4): Ground (2) (3) ( Tolerance 0.3mm in mm ) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Stop Band Att.(2) (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFWKA450KDFA-R0 450 - fn10.0 min. fn20.0 max. [within 50dB] 50 min. [within fn100kHz] - 4.0 max. [at minimum loss point] 3.0 max. [within fn7kHz] 1500 CFWKA450KEFA-R0 450 - fn7.5 min. fn15.0 max. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn5kHz] 1500 CFWKA450KEFA001-R0 450 fn6.5 min. - fn15.0 max. [within 50dB] 55 min. [fn18 to 33kHz] 50 min. [within fn100kHz] 4.0 max. [at fn] 3.0 max. [within fn6.5kHz] 1500 CFWKA450KFFA-R0 450 - fn6.0 min. fn12.5 min. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn4kHz] 1500 CFWKA450KGFA-R0 450 - fn4.5 min. fn11.0 max. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 2.0 max. [within fn3kHz] 1500 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg (1) (2) (4) (3) R2 E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4) : Ground Rg+R1=R2=Input/Output Impedance 15 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWKA450KEFA001-R0 0 CFWKA450KEFA001-R0 0 400 10 4 20 8 30 16 40 200 20 24 28 Attenuation (dB) 12 G.D.T. ( sec.) Attenuation (dB) 300 50 60 70 100 32 6 80 36 90 40 0 440.0 450.0 100 460.0 430 Frequency (kHz) CFWKA450KEFA001-R0 0 10 20 Attenuation (dB) 30 40 50 60 70 80 90 100 200 300 400 500 600 700 Frequency (kHz) 16 455 Frequency (kHz) 800 900 1000 480 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment Y50 B1 6.5 The CFWKA_Y series is comprised of small, high performance, thin (3.0mm) filters consisting of 6 ceramic elements. The filters are recommend for digital communication applications and are perfect in hand held cellular phones. 7.5 max. CERAFILr kHz SMD Type CFWKA_Y Series EIAJ CODE Dot marking Sealing 1.20.1 3.0 max. 1.20.1 5.5 3.0 1.50.3 11.5 3.0 C0.3 1.20.1 1.20.1 5.5 3.0 1.50.3 Sealing Features (1) (4) 1. The filters are mountable by automatic placers, and can be reflow soldered. 2. They are slim, at only 3.0mm maximum thickness. 3. The filters are wide bandwidth, flat GDT within pass band. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Nominal Center 3dB Frequency (fn) Bandwidth (kHz) (kHz) Part Number CFWKA450KBFY001-R0 450 6dB Bandwidth (kHz) Stop Bandwidth (kHz) fn13.0 min. fn30.0 max. [within 50dB] fn11.5 min. (2) (3) (1) : Input (2) : Output (3)(4): Ground ( Tolerance 0.3mm in mm ) 7 Stop Band Attenuation (dB) Insertion Loss (dB) Spurious Response (dB) 45 min. 4.0 max. 20 min. [within fn100kHz] [at minimum loss point] [within 0.1 to 1.0MHz] GDT Deviation (s) Input/Output Impedance (ohm) 30.0 max. [within fn10kHz] 1000 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg (1) (2) (4) (3) R2 E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4) : Ground Rg+R1=R2=Input/Output Impedance 17 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics 0 0 200 10 2 4 20 30 8 40 10 100 12 14 Attenuation (dB) 6 G.D.T. ( sec.) Attenuation (dB) 150 50 60 70 50 16 80 18 90 20 0 420 7 430 440 450 460 Frequency (kHz) 18 470 480 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFECS10M8 Series 3.450.2 3.100.2 The SFECS10M8 series are small, high performance and super thin (1.5mm max.) filters. Piezoelectric element is connected in the sandwich shape by heat resistant substrate. The filters exhibit flat GDT characteristic in pass band. The filters are recommended for digital communication applications and are perfect in hand held cellular phones, pocket cordless phones, etc. Input electrode marker +0.3 0~0.3 0.60.3 0.4-0.2 0.60.3 0~0.3 0.850.3 (1.35) (1.35) 0.70.3 0.70.3 0.70.3 (1) (2) (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output ( ) : Reference : EIAJ Monthly Code (3) (4) 0.850.3 Features 8 1.40.1 0~0.3 (in mm) (1.30) (1.30) 0~0.3 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.5mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Types with 10.7/10.75/10.8MHz of center frequency are available. 4. Operating temperature range: -10 to +50 (degree C) Storage temperature range: -40 to +85 (degree C) Nominal Center 3dB Frequency (fn) Bandwidth (MHz) (kHz) Part Number Stop Bandwidth (kHz) Insertion Loss (dB) Ripple (dB) Spurious Response (dB) GDT Deviation (s) Absolute GDT (s) Input/Output Impedance (ohm) SFECS10M8PF00-R0 10.800 fn110 min. fn310 max. [within 20dB] 6.0 max. [at fn] 0.5 max. [within fn100kHz] - 1.5 max. [within fn100kHz] 2.8 1.0s [at fn] 330 SFECS10M8RF00-R0 10.800 fn135 min. fn350 max. [within 20dB] 6.0 max. [at fn] 0.5 max. [within fn100kHz] - 1.2 max. [within fn100kHz] 2.6 1.0s [at fn] 330 SFECS10M8SF00-R0 10.800 fn150 min. fn420 max. [within 20dB] 5.0 max. [at fn] 1.0 max. [within fn110kHz] 25 min. [within 9 to 12 MHz] 1.5 max. [within fn110kHz] - 330 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit 3 R1 2 1 Rg 4 E1 E2 R2 C2 RF Voltmeter S.S.G. =-10dBm Rg + R1 = R2 = Input/Output Impedance C2 = 10pF (Including stray capacitance and capacitance of RF Voltmeter) E1 : S. S. G. Output Voltage 22 1 2 3 4 : Input : Ground : Float : Output P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics SFECS10M8PF00-R0 SFECS10M8PF00-R0 7 0 0 6 20 4 4 6 Attenuation (dB) 5 G. D. T. (sec) Attenuation (dB) 2 40 60 3 8 80 2 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 9.6 10.2 10.8 Frequency (MHz) 11.4 12.0 8 23 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFECF10M7 Series 1.30.1 SFECF10M7 series for FM-receivers are small, high performance and super thin (1.4mm max.) filters. Piezoelectric element is connected in the sandwich shape by ceramics substrate. They have 1.4mm max. thickness and small mounting area. (3.45x3.1mm) SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set so thin and small sized. Input electrode marker 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) 0.3 min. 0.3 min. (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 0.750.3 0.850.3 0.850.3 0.650.3 0.70.3 0.650.3 Features 9 3.10.2 3.450.2 (1) : (2)(5) : (3)(4) : (6) : : ( ): Input Ground No connect Output EIAJ Monthly Code Reference 0 to 0.35 (in mm) 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Center Nominal Center 3dB Bandwidth Attenuation Frequency (fo) Frequency (fn) (kHz) (kHz) (MHz) (MHz) Part Number Insertion Loss (dB) Ripple (dB) Spurious Input/Output Attenuation Impedance (dB) (ohm) SFECF10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 330 SFECF10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 330 SFECF10M7DF00-R0 - 10.700 fn150 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 330 Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (3) (4) (2) (5) R1 (1) (6) Rg E1 R2 C2 E2 RF Voltmeter S.S.G. Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage 24 (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics SFECF10M7FA00-R0 0 1 6.0 10 2 5.0 20 3 4.0 4 3.0 5 2.0 50 6 1.0 60 7 10.300 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 Attenuation (dB) 7.0 G.D.T. (sec.) Attenuation (dB) SFECF10M7FA00-R0 0 30 40 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 9 25 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFECD10M7 Series 1.0 max. 3.450.2 3.10.2 SFECD10M7 series for FM-receivers are small, high performance and ultra thin (1.0mm max.) filters. Piezoelectric element is connected in the sandwich shape by very thin ceramics substrate. They have 1.0mm max. thickness and small mounting area. (3.45x3.1mm) SFECD series enable customers to make RF modules so thin and small sized. 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) Features (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 0.750.3 0.850.3 0.850.3 0.650.3 0.550.3 0.650.3 0 to 0.35 (1) : (2)(5) : (3)(4) : (6) : : : : ( 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Input Ground No Connect Output Marking EIAJ Monthly Code Center Frequency Rank Code ) : Reference (in mm) Applications 10 1. Card type radios 2. Card type RKE modules 3. Card type PHS modules Part Number SFECD10M7FA00-R0 Center Nominal Center 3dB Bandwidth Attenuation Frequency (fo) Frequency (fn) (kHz) (kHz) (MHz) 10.700 30kHz 280 50kHz - 590 max. Insertion Loss (dB) Ripple (dB) 3.0 2.0dB 1.0 max. Spurious Input/Output Attenuation Impedance (dB) (ohm) 30 min. Area of Attenuation: [within 20dB] Area of Spurious Attenuation: [within 9MHz to 12MHz] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (3) (4) (2) (5) R1 (1) (6) Rg E1 R2 C2 E2 S.S.G. R1+Rg=R2=3305%, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage 26 RF Voltmeter (1) : Input (2)(5) : Ground (3)(4) : Float (6) : Output 330 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P05E12.pdf 05.3.15 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics 0 7 1 6 2 5 3 4 4 3 5 2 6 1 0 7 10.300 10.500 10.700 Frequency (MHz) 10.900 0 11.100 Attenuation (dB) 20 G.D.T. (sec.) Attenuation (dB) 10 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 10 27 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFSCD20M0 Series 4.5 * 3.8 (4.0) (4-R0.3) (0.3) (1.8) Features 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling flexible PCB design. 3. Available lead (Pb) free solder reflow. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) (4) (3) (1) (2) (2.25) 0.6 1.1 0.85 0.15 1.0 max. (3) (4) (1) : Input (2) : Output (3) : No Connect (4) : Ground * : EIAJ Monthly Code Tolerance unless otherwise specified : 0.1 ( ) : Reference 0.15 (in mm) 0.3 SFSCD series are chip surface mount filter, having center frequency 15 to 22 MHz and 3dB bandwidth 1.2 to 1.8MHz (at 20MHz). (More than twice width compared with current types) They have 1.0mm max. thickness and small mounting area. (4.5x3.8mm) 0.4 (2) (3.5) (1) Applications 1. GPS 2. Wireless audio Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) SFSCD20M0WF01-R0 20.000 fn820 min. 11 Stop Bandwidth (MHz) Insertion Loss (dB) Ripple (dB) 3.6 max. (Total) 6.0 max. 2.0 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] Spurious Response (dB) GDT Deviation (s) Input/Output Impedance (ohm) 34/23 min. [within 15MHz to fn / fn to 25MHz] 0.4 max. [within fn750kHz] 470 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (4) (3) (1) (2) R1 Rg R2 S.S.G. C2 RF Voltmeter (1) : Input (2) : Output (3) : No Connect (4) : Ground R1+Rg=R2=Input/Output Impedance, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage 28 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics 0 2.0 4 1.6 0 10 1.2 12 0.8 16 0.4 Attenuation (dB) 8 G.D.T. (sec.) Attenuation (dB) 20 30 40 50 60 70 20 18.000 19.000 20.000 Frequency (kHz) 21.000 0.0 22.000 80 16.000 18.000 20.000 Frequency (kHz) 22.000 24.000 11 29 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFSCE10M7 Series 4.5 * 3.8 (4.0) (4-R0.3) Features (0.3) (1.8) 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling flexible PCB design. 3. Available lead (Pb) free solder reflow. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) (4) (3) (1) (2) (2.25) 0.6 1.1 0.85 0.15 1.0 max. (3) (4) (1) : Input (2) : Output (3) : No Connect (4) : Ground * : EIAJ Monthly Code Tolerance unless otherwise specified : 0.1 ( ) : Reference 0.15 (in mm) 0.3 SFSCE series are chip surface mount filter and available for 3dB bandwidth at 700kHz to 1.3MHz. (more than twice width compared with current types) They have 1.0mm max. thickness and small mounting area. (4.5x3.8mm) 0.4 (2) (3.5) (1) Applications 1. SS digital communication system 2. Digital wireless audio 3. PHS Evolution system 4. RFID Reader Writer 5. RKE Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) SFSCE10M7WF03-R0 10.700 fn500 min. 2.2 max. (Total) 6.0 max. 2.0 max. 30/25 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn400kHz] 470 SFSCE10M7WF04-R0 10.700 fn400 min. 1.8 max. (Total) 6.0 max. 1.5 max. 35/25 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn325kHz] 470 SFSCE10M7WF05-R0 10.700 fn325 min. 1.7 max. (Total) 6.0 max. 1.5 max. 40/30 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn250kHz] 470 12 Stop Bandwidth (MHz) Insertion Loss (dB) Ripple (dB) Spurious Response (dB) GDT Deviation (s) Input/Output Impedance (ohm) For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (4) (3) (1) (2) R1 Rg R2 S.S.G. C2 RF Voltmeter (1) : Input (2) : Output (3) : No Connect (4) : Ground R1+Rg=R2=Input/Output Impedance, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage 30 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics SFSCE10M7WF03-R0 SFSCE10M7WF03-R0 0 2.0 2 1.6 0 1.2 6 0.8 8 0.4 Attenuation (dB) 4 G.D.T. (sec.) Attenuation (dB) 20 40 60 10 9.500 9.900 10.300 10.700 11.100 Frequency (MHz) 11.500 0.0 11.900 80 6.700 8.700 10.700 12.700 14.700 Frequency (MHz) 12 31 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case General Use CFULA Series 8.00.3 2.70.3 1. High selectivity 2. A variety of bandwidths available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) (2) 7.00.3 0.80.1 3.00.3 1.20.5 (1) (3) 4.20.3 0.150.05 Features 3.30.5 0.60.1 Connection (1) : Input (2) : Ground (3) : Output (in mm) Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULA455KB2A-B0 455.0 2.0kHz fn15.0 min. fn30.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KC2A-B0 455.0 2.0kHz fn12.5 min. fn24.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KD4A-B0 455.0 1.5kHz fn10.0 min. fn20.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KE4A-B0 455.0 1.5kHz fn7.5 min. fn15.0 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFULA455KF4A-B0 455.0 1.5kHz fn6.0 min. fn12.5 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KG1A-B0 455.0 1.0kHz fn4.5 min. fn10.0 max. [within 40dB] 25 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KH1A-B0 455.0 1.0kHz fn3.0 min. fn9.0 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 Part Number 13 1.5 max. 7.30.3 EIAJ CODE 0.30.1 CFULA series are high selectivity ceramic filters, which consist of 4 ceramic elements connected in a ladder form. Most suitable for digital communications and cellular phones because of their improved GDT characteristics. MARKING Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg E1 (3) (1) (2) R2 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance 44 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULA455KE4A-B0 CFULA455KE4A-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 70 50 80 80 90 90 100 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 13 45 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFWLA Series MARKING 7.50.5 EIAJ CODE 2.90.3 1. Low profile, high selectivity 2. Available bandwidths are B to J as standard 3. Easily mountable on any PC board 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Part Number 14 Nominal Center 6dB Frequency (fn) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) 0.80.1 3.50.5 0.15 Features 2.60.3 2.90.3 2.9-- 2.9 --0.3 (4) (3) Stop Band Attenuation (dB) (2) (1) (5) Insertion Loss (dB) 4.30.3 1.350.5 1.20.5 2.30.5 1.5 max. Ceramic filter CFWLA series are low profile high selectivity ceramic filters which use 6 elements in ladder form. They are best suitable to high-class transceivers, cordless telephones and amateur radios. 7.00.5 11.00.5 0.60.1 Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 Ripple (dB) Input/Output Impedance (ohm) CFWLA455KBFA-B0 455 fn15.0 min. fn30.0 max. 35 min. 4.0 max. 3.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLA455KCFA-B0 455 fn12.5 min. fn24.0 max. 35 min. 4.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn8kHz] 1500 CFWLA455KDFA-B0 455 fn10.0 min. fn20.0 max. 35 min. 4.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn7kHz] 1500 CFWLA455KEFA-B0 455 fn7.5 min. fn15.0 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn5kHz] 1500 CFWLA455KFFA-B0 455 fn6.0 min. fn12.5 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn4kHz] 2000 CFWLA455KGFA-B0 455 fn4.5 min. fn10.0 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn3kHz] 2000 CFWLA455KHFA-B0 455 fn3.0 min. fn9.0 max. 60 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn2kHz] 2000 CFWLA455KJFA-B0 455 fn2.0 min. fn7.5 max. 60 min. 7.0 max. 2.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn1.5kHz] 2000 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (5) R1 (1) (2) (3) (4) R2 Rg E1 S.S.G. 0dBm RF Voltmeter Connection (1) : Input (5) : Output (2)(3)(4) : Ground Rg+R1=R2=Input/Output Impedance 46 E2 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLA455KEFA-B0 CFWLA455KEFA-B0 0 400 0 10 10 20 20 30 40 40 200 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 300 50 60 70 100 80 80 90 90 100 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 14 47 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFULB Series MARKING 0.150.05 (1) (3) Features 1. Miniature and high selectivity 2. A variety of bandwidths are available 3. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Connection (1) : Input (2) : Output (3) : Ground (4) (in mm) (2) (4) } Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULB455KB2A-B0 455.0 2.0kHz fn15.0 min. fn30.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KC2A-B0 455.0 2.0kHz fn12.5 min. fn24.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KD4A-B0 455.0 1.5kHz fn10.0 min. fn20.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KE4A-B0 455.0 1.5kHz fn7.5 min. fn15.0 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFULB455KF4A-B0 455.0 1.5kHz fn6.0 min. fn12.5 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KG1A-B0 455.0 1.0kHz fn4.5 min. fn10.0 max. [within 40dB] 25 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KH1A-B0 455.0 1.0kHz fn3.0 min. fn9.0 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KJ1A-B0 455.0 1.0kHz fn2.0 min. fn7.5 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 Part Number 15 0.50.1 4.30.3 0.80.3 1.80.3 0.70.3 1.00.3 2.40.3 0.70.1 3.50.3 6.30.3 EIAJ CODE 1.0 max. CFULB series ceramic filters are miniature, high performance ceramic filters composed of piezoelectric elements connected in a ladder form. These filters, only 6.3mm high, are 65% the volume of conventional types. (CFULA455K series) They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, car radios, cordless telephones and mobile telephones. 6.50.3 6.50.3 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) (3) (4) Rg E1 R2 S.S.G. 0dBm RF Voltmeter Connection (1) : Input (2) : Output (3)(4) :Ground Rg+R1=R2=Input/Output Impedance 48 E2 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULB455KE4A-B0 CFULB455KE4A-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 70 50 80 80 90 90 100 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 15 49 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case General Use CFWLB Series 3.50.3 6.30.3 EIAJ CODE 0.150.05 (3) Features (4) (5) 0.70.3 1. Miniature and high selectivity 2. A variety of bandwidths are available. 3. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) 0.70.1 0.50.1 Connection (1) : Input (2) : Output (3) (4) : Ground (5) } (in mm) Nominal Center Frequency (fn) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFWLB455KBFA-B0 455 fn15.0 min. fn30.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KCFA-B0 455 fn12.5 min. fn24.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KDFA-B0 455 fn10.0 min. fn20.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KEFA-B0 455 fn7.5 min. fn15.0 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFWLB455KEFA004-B0 455 fn7.5 min. fn15.0 max. [within 60dB] 60 min. [within fn15kHz to 30kHz] 5.0 max. [at fn] 1500 CFWLB455KFFA-B0 455 fn6.0 min. fn12.5 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KGFA-B0 455 fn4.5 min. fn10.0 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KHFA-B0 455 fn3.0 min. fn9.0 max. [within 50dB] 55 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KJFA-B0 455 fn2.0 min. fn7.0 max. [within 50dB] 55 min. [within fn100kHz] 7.0 max. [at minimum loss point] 2000 Part Number 16 1.00.3 (2) (1) 4.30.3 2.50.3 2.70.3 2.80.3 0.90.3 1.0 max. CFWLB series ceramic filters are miniature, high performance ceramic filters composed of piezoelectric elements connected in a ladder form. These filters, only 6.3mm high, are 67% the volume of conventional types. (CFWLB series) They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, pagers, car radios, cordless telephones and mobile telephones. 6.50.3 9.50.3 MARKING CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) (3) (4) (5) Rg S.S.G. 0dBm E1 R2 E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4)(5) : Ground Rg+R1=R2=Input/Output Impedance 50 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLB455KEFA-B0 CFWLB455KEFA-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 50 80 80 90 90 100 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 16 51 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 2.70.3 1. High selectivity 2. A variety of bandwidths are available. 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (2) (1) (3) 1.20.5 3.30.5 Stop Band Attenuation (dB) Insertion Loss (dB) 0.80.1 3.00.3 0.150.05 Features 4.20.3 1.5 max. 7.30.3 EIAJ CODE 0.30.1 CFULA_Y series are high selectivity ceramic filters, which consist of 4 ceramic elements connected in a ladder form. Most suitable for digital communications and cellular phones because of their improved GDT characteristics. 7.00.3 8.00.3 MARKING GDT Deviation (s) 0.60.1 Connection (1) : Input (2) : Ground (3) : Output (in mm) Input/Output Impedance (ohm) CFULA455KB4Y-B0 455.0 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFULA455KC4Y-B0 455.0 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 15.0 max. [within fn8kHz] 1500 CFULA455KD1Y-B0 455.0 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn7kHz] 1500 CFULA455KE1Y-B0 455.0 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn5kHz] 1500 CFULA455KF1Y-B0 455.0 1.0kHz fn6.0 min. fn17.5 max. 23 min. 9.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn4kHz] 2000 CFULA455KG1Y-B0 455.0 1.0kHz fn4.5 min. fn15.0 max. 23 min. 10.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit 17 R1 Rg E1 (3) (1) (2) R2 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance 52 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULA455KE1Y-B0 CFULA455KE1Y-B0 0 0 200 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 0 430 455 Frequency (kHz) 480 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 17 53 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series MARKING 7.50.5 EIAJ CODE 0.80.1 3.50.5 0.15 2.90.3 2.60.3 2.90.3 2.9-- 2.9 --0.3 Features Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (4) (3) 2.30.5 Stop Band Attenuation (dB) (2) (5) Insertion Loss (dB) (1) 4.30.3 1.350.5 1.20.5 1. High selectivity 2. A variety of bandwidths are available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) 1.5 max. CFWLA_Y series are high selectivity ceramic filters, which consist of 6 ceramic elements connected in a ladder form. Most suitable for digital communications and mobile telephones because of their improved GDT characteristics. 7.00.5 11.00.5 0.60.1 Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 GDT Deviation (s) Input/Output Impedance (ohm) CFWLA455KB4Y-B0 455.0 1.5kHz fn15.0 min. fn35.0 max. 40 min. 6.0 max. 30.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLA455KC4Y-B0 455.0 1.5kHz fn12.5 min. fn30.0 max. 40 min. 7.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn8kHz] 1500 CFWLA455KD1Y-B0 455.0 1.0kHz fn10.0 min. fn25.0 max. 40 min. 8.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn7kHz] 1500 CFWLA455KE1Y-B0 455.0 1.0kHz fn7.5 min. fn20.0 max. 40 min. 9.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn5kHz] 1500 CFWLA455KF1Y-B0 455.0 1.0kHz fn6.0 min. fn17.5 max. 40 min. 10.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn4kHz] 2000 CFWLA455KG1Y-B0 455.0 1.0kHz fn4.5 min. fn15.0 max. 40 min. 11.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit 18 (5) R1 (1) (2) (3) (4) R2 Rg E1 S.S.G. 0dBm RF Voltmeter Connection (1) : Input (5) : Output (2)(3)(4) : Ground Rg+R1=R2=Input/Output Impedance 54 E2 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLA455KE1Y-B0 CFWLA455KE1Y-B0 0 0 400 10 10 20 20 300 30 200 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 100 80 80 90 90 100 0 430 455 Frequency (kHz) 480 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 18 55 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series MARKING 0.150.05 (1) 1. Miniature, flat GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (2) (3) Stop Band Attenuation (dB) Insertion Loss (dB) (4) 0.50.1 4.30.3 Features 0.80.3 1.80.3 0.70.3 Connection (1) : Input (2) : Output (3) : Ground (4) 1.00.3 2.40.3 0.70.1 3.50.3 6.30.3 EIAJ CODE (in mm) GDT Deviation (s) } Input/Output Impedance (ohm) CFULB455KB4Y-B0 455.0 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFULB455KC4Y-B0 455.0 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 15.0 max. [within fn8kHz] 1500 CFULB455KD1Y-B0 455.0 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn7kHz] 1500 CFULB455KE1Y-B0 455.0 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn5kHz] 1500 CFULB455KF1Y-B0 455.0 1.0kHz fn6.0 min. fn17.5 max. 23 min. 9.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn4kHz] 2000 CFULB455KG1Y-B0 455.0 1.0kHz fn4.5 min. fn15.0 max. 23 min. 10.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) (3) (4) Rg 19 1.0 max. Ceramic filter CFULB_Y series are miniature and high performance filters. These filters, only 6.3mm high, are 65% the volume of conventional types (CFULA455K_Y series). Well suited for miniaturizing communications equipment, especially for a cellular phone. 6.50.3 6.50.3 E1 R2 S.S.G. 0dBm RF Voltmeter Connection (1) : Input (2) : Output (3)(4) :Ground Rg+R1=R2=Input/Output Impedance 56 E2 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULB455KE1Y-B0 CFULB455KE1Y-B0 0 0 200 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 0 430 455 Frequency (kHz) 480 100 200 300 400 500 600 700 800 900 1000 Frequency (kHz) 19 57 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 3.50.3 6.30.3 EIAJ CODE 0.150.05 (1) 1. Miniature, flat GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) (3) Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (2) (4) (5) 0.70.3 Stop Band Attenuation (dB) Insertion Loss (dB) 1.00.3 Features 4.30.3 2.50.3 2.70.3 2.80.3 0.90.3 GDT Deviation (s) 1.0 max. Ceramic filter CFWLB_Y series are miniature and high-performance filters. These filters, only 6.3mm high, are 67% the volume of conventional types (CFWLA455K_Y series). Well suited for miniaturizing communications equipment, especially for a cellular phone. 6.50.3 9.50.3 MARKING 0.70.1 0.50.1 Connection (1) : Input (2) : Output (3) (4) : Ground (5) } (in mm) Input/Output Impedance (ohm) CFWLB455KB4Y-B0 455.0 1.5kHz fn15.0 min. fn30.0 max. 40 min. 6.0 max. 30.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLB455KC4Y-B0 455.0 1.5kHz fn12.5 min. fn27.5 max. 40 min. 7.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn8kHz] 1500 CFWLB455KD1Y-B0 455.0 1.0kHz fn10.0 min. fn25.0 max. 40 min. 8.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn7kHz] 1500 CFWLB455KE1Y-B0 455.0 1.0kHz fn7.5 min. fn20.0 max. 40 min. 9.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn5kHz] 1500 CFWLB455KF1Y-B0 455.0 1.0kHz fn6.0 min. fn17.5 max. 40 min. 10.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn4kHz] 2000 CFWLB455KG1Y-B0 455.0 1.0kHz fn4.5 min. fn15.0 max. 40 min. 11.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) (3) (4) (5) Rg S.S.G. 0dBm E1 R2 E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4)(5) : Ground 20 Rg+R1=R2=Input/Output Impedance 58 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLB455KE1Y-B0 CFWLB455KE1Y-B0 0 200 0 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 20 59 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment kHz Type Ceramic Discriminators 6.00.2 6.20.2 MARKING 6.60.3 Ceramic discriminator consists of wide band piezoelectric resonator. It is ideal for mobile communications equipment due to its small size and light weight. Standard line include products for wide range of applications, from cordless telecom to cellular telephone. It helps to realize adjustment free at detection circuit and down sizing. EIAJ CODE 3.1 max. 1.00.1 3.70.2 1.50.3 1.150.2 CDBKB Series Features (in mm) 3.50.3 1. Small in size and light weight 2. Adjustment free at detection circuit 3. High sensitivity and stability 4. Wide range of standard products are available for various ICs. 5. Operating temperature range: -20 to +80 (degree C) Storage temperature range: -40 to +85 (degree C) 7.00.3 1.5 max. 9.00.3 MARKING 3.50.5 EIAJ CODE 1.750.5 0.10.05 CDBLA Series 0.250.05 0.80.1 1.10.1 (in mm) 5.00.2 6.00.2 6.00.2 3.00.3 4.20.2 0.50.1 CDBLB_CAY Series 4.20.2 0.90.2 (in mm) 0.90.2 6.3 max. 6.0 max. 4.20.5 EIAJ CODE 0.150.05 1.00.3 1.50.3 6.3 max. MARKING 0.50.2 CDBLB_CAX Series 0.150.05 1.80.2 0.60.2 0.50.1 6.0 max. EIAJ CODE 4.20.5 MARKING 3.00.3 (in mm) Specified by Impedance Characteristics (Type 1) Part Number Nominal Center Inclination of Frequency (fn) Impedance Curve(1) (kHz) Inclination of Capacitance Impedance Curve(2) (C) IC IC Maker Type CDBLB455KCAX02-B0 455 447.01.5kHz (at |Z|=2.05kohm) 463.01.5kHz (at |Z|=10.0kohm) 140pF20% TA8104F TOSHIBA Lead CDBLB455KCAX31-B0 455 447.01.5kHz (at |Z|=2.05kohm) 463.01.5kHz (at |Z|=10.0kohm) 140pF20% TA31141 TOSHIBA Lead For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 21 61 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Impedance Curve CDBLB455KCAX02-B0 CDBLB455KCAX31-B0 500K 500K 180 180 100K 100K 50K 50K 0 1K 5K 0 1K -90 500 100 50 400 10K Phase (deg) 5K Impedance () 10K 90 Phase (deg) Impedance () 90 100 -180 420 440 460 Frequency (kHz) 480 -90 500 50 400 500 -180 420 440 460 Frequency (kHz) 480 500 Specified by Impedance Characteristics (Type 2) Nominal Center Anti-resonant Frequency (fn) Frequency (Fa) (kHz) Part Number Delta F (Fa-Fr) Resonant Capacitance Resistance (R) (C) IC IC Maker Type CDBKB455KCAX33-R0 - 458.01.5kHz 424.0kHz 300ohm max. 280pF20% CXA1474 SONY SMD CDBLA455KCAY03-B0 - 455.01.5kHz 485.0kHz 70ohm max. 600pF20% CXA1184 SONY Lead CDBLB455KCAY03-B0 - 455.01.5kHz 465.0kHz 70ohm max. 550pF20% CXA1184M SONY Lead CDBLB455KCAX15-B0 - 463.51.0kHz 432.0kHz 300ohm max. 140pF20% CXA1183M SONY Lead CDBLB455KCAX25-B0 455 465.01.5kHz 454.0kHz 300ohm max. 135pF20% CXA1484 SONY Lead CDBLB455KCAX33-B0 455 465.01.5kHz 454.0kHz 300ohm max. 135pF20% CXA1474 SONY Lead For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Impedance Curve CDBLA/CDBLB455KCAY03-B0 CDBLB455KCAX15-B0 500K 100K 180 180 50K 100K 50K 10K 90 90 10K 5K 0 Phase (deg) Impedance () 0 1K 500 Phase (deg) Impedance () 5K 1K -90 100 -90 500 50 21 -180 10 380 400 420 440 Frequency (kHz) 460 480 100 50 390 -180 410 430 450 Frequency (kHz) 470 490 Continued on the following page. 62 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Impedance Curve CDBLB455KCAX25-B0 500K CDBKB455KCAX33-R0 100K 50K 10K 0 5K 1K Impedance () 90 Phase (deg) Impedance () 50K 90 10K 5K 0 Phase (deg) 100K 1K -90 500 -90 500 100 100 50 400 180 500K 180 420 440 460 Frequency (kHz) 480 -180 500 50 400 420 440 460 Frequency (kHz) 480 -180 500 CDBLB455KCAX33-B0 180 500K 100K 90 10K 5K 0 Phase (deg) Impedance () 50K 1K -90 500 100 50 400 420 440 460 Frequency (kHz) 480 -180 500 21 63 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P05E12.pdf 05.3.15 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Specified by Recovered Audio Characteristics Part Number Nominal Center Recovered Frequency (fn) Audio 3dB BW (kHz) (kHz) Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type CDBKB455KCAY07-R0 455 fn4.0 min. 350 60 3.0 max. - MC3357 MOTOROLA SMD CDBKB455KCAY09-R0 455 fn4.0 min. 120 40 1.5 max. - NE604N PHILIPS SMD CDBKB455KCAY13-R0 455 fn4.0 min. 330 50 4.0 max. - CXA1003BM SONY SMD CDBKB455KCAY16-R0 455 fn4.0 min. 175 40 2.0 max. - MC3372 MOTOROLA SMD CDBKB455KCAY24-R0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA SMD CDBKB455KCAY27-R0 455 fn4.0 min. 90 30 2.0 max. - TK10487 TOKO SMD CDBKB455KCAY28-R0 455 fn4.0 min. 40 20 3.0 max. - TA31142F TOSHIBA SMD CDBKB455KCAY29-R0 455 fn4.0 min. 100 30 2.5 max. - NE605 PHILIPS SMD CDBKB455KCAY35-R0 455 fn4.0 min. 100 40 2.5 max. - TK10930 TOKO SMD CDBKB455KCAY40-R0 455 fn4.0 min. 40 20 3.5 max. - TA31145 TOSHIBA SMD CDBKB455KCAY49-R0 455 fn4.0 min. 45 10 3.0 max. - MC3361 MOTOROLA SMD CDBKB455KCAY50-R0 455 fn4.0 min. 64 6.4 4.0 max. - CXA3117N SONY SMD CDBKB455KCAY66-R0 455 fn4.2 min. 40 10 4.0 max. - NJM2590 JRC SMD CDBKB455KCLX36-R0 455 fn13.0 min. 90 30 2.5 max. 5.0 max. [within fn 6kHz] NE(SA)606 /NE(SA)616 PHILIPS SMD CDBKB455KCLX39-R0 455 fn11.0 min. 130 20 2.5 max. 7.0 max. [within fn 8kHz] NE607 /NE617 PHILIPS SMD CDBKB455KCLY13-R0 455 fn13.0 min. 120 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY SMD CDBLA455KCAY07-B0 455 fn4.0 min. 340 60 2.5 max. - MC3357 MOTOROLA Lead CDBLA455KCAY09-B0 455 fn5.0 min. 100 min. 1.5 max. - NE604N PHILIPS Lead CDBLA455KCAY13A-B0 455 fn4.0 min. 350 50 3.0 max. - CXA1003BM SONY Lead CDBLA455KCAY16-B0 455 fn4.0 min. 185 40 2.0 max. - MC3372 MOTOROLA Lead CDBLA455KCAY24-B0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA Lead CDBLA455KCAY28-B0 455 fn4.0 min. 40 20 3.0 max. - TA31142 TOSHIBA Lead CDBLA455KCAY34-B0 455 fn4.0 min. 65 20 2.5 max. - MC13136 MOTOROLA Lead CDBLA455KCLY09-B0 455 fn15.0 min. 70 20 1.5 max. 3.5 max. [within fn 8kHz] NE604N PHILIPS Lead CDBLA455KCLY13-B0 455 fn15.0 min. 110 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY Lead CDBLB455KCAY07-B0 455 fn4.0 min. 340 60 3.0 max. - MC3357 MOTOROLA Lead CDBLB455KCAY13A-B0 455 fn4.0 min. 350 50 3.0 max. - CXA1003BM SONY Lead 21 Continued on the following page. 64 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Nominal Center Recovered Frequency (fn) Audio 3dB BW (kHz) (kHz) Part Number Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type CDBLB455KCAY24-B0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA Lead CDBLB455KCAY28-B0 455 fn4.0 min. 40 20 3.0 max. - TA31142FN TOSHIBA Lead CDBLB455KCAY34-B0 455 fn4.0 min. 65 20 2.5 max. - MC13136 MOTOROLA Lead CDBLB455KCAY40-B0 455 fn4.0 min. 40 20 3.0 max. - TA31145 TOSHIBA Lead CDBLB455KCAY42-B0 455 fn4.0 min. 40 15 3.0 max. - TK14590 /TK14591 TOKO Lead CDBLB455KCAY49-B0 455 fn4.0 min. 45 10 3.0 max. - MC3361 MOTOROLA Lead CDBLB455KCAY50-B0 455 fn4.0 min. 64 6.4 4.0 max. - CXA3117N SONY Lead CDBLB455KCLY09-B0 455 fn15.0 min. 70 20 1.5 max. 3.5 max. [within fn 8kHz] NE604N PHILIPS Lead CDBLB455KCLY13-B0 455 fn15.0 min. 110 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY Lead CDBLB455KCAX16-B0 455 fn4.0 min. 185 40 2.0 max. - MC3372 MOTOROLA Lead CDBLB455KCAX18-B0 455 fn3.0 min. 180 40 2.0 max. - MC3371 MOTOROLA Lead CDBLB455KCAX36-B0 455 fn3.5 min. 100 25 3.5 max. - NE606 /616 PHILIPS Lead For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit MC3357 NE604N 8.2k IF input AF output 14 13 12 11 10 9 6 0.1 7 8 0.1 MC3357 1 2 3 4 5 0.022 10 + 15 14 13 47k 1 X CDBLB455KCAY07-B0 CDBKB455KCAY07-R0 10 9 2 3 4 6 7 8 C 5 C R 150pF 1.5k 150pF 1.3k X Vcc Unit C : F R: CDBLA455KCAY07-B0 11 R 0.1 Part Number (X) 12 NE604 C 50 Vcc FM S. S. G. (Rg = 50) 16 0.1 100p 1000p + 47 Part Number (X) C R L CDBLA455KCAY09-B0 120pF 1.8k - CDBKB455KCAY09-R0 CDBLA455KCLY09-B0 120pF 560 220H CDBLB455KCLY09-B0 CXA1003BM R L 100p 15 0.01 0.01 16 0.1 10k 0.01 AF output Unit C : F R: MC3372 IF input L 0.01 0.01 0.01 0.01 0.01 X 0.01 23 22 21 20 19 18 17 16 15 51k 14 16 5 6 0.01 Part Number (X) C R L CDBLA455KCAY13A-B0 - 82pF 1.2k CDBLB455KCAY13A-B0 - CDBKB455KCAY13-R0 82pF 1.0k CDBLA455KCLY13-B0 CDBLB455KCLY13-B0 82pF 560 220H CDBKB455KCLY13-R0 7 8 9 0.01 10 11 15 14 Vcc 51k 100 100 Vcc 13 12 2 3 4 12 2700p 4 0.01 3 AF output 11 10 9 MC3372 1 2 8.2k 13 CXA1003BM 1 510k 0.01 0.01 C 24 0.1 51 R 68p 5 6 7 8 0.1 51k C 1.8k 220p 0.1 X 0.01 AF output (Rg = 50) FM S. S. G Unit C : F R: R Part Number (X) Unit C : F R: C R 100pF 1.3k CDBLB455KCAX16-B0 27pF 4.3k CDBKB455KCAY16-R0 100pF 1.0k CDBLA455KCAX16-B0 21 Continued on the following page. 65 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit MC3371 TA31136 RF input 510k 51k 0.01 + 10 0.1 51 X C 8.2k R 1 + AF output AF output 0.01 13 12 11 10 3 4 5 6 7 Vcc 68p 220p Test condition Vcc = +6.0V R = 6.2k X : CDBLB455KCAX18-B0 8 0.1 2 15 14 1 2 3 13 12 11 10 9 6 7 8 0.01 TA31136F Vcc (+2.0V) MC3371 1 16 9 X 4 + 10 5 0.1 14 0.01 15 0.1 16 Unit C : F R: R 0.1 Part Number (X) IF input 0.01 CDBLA455KCAY24-B0 CDBLB455KCAY24-B0 IF input CDBKB455KCAY24-R0 Unit C : F R: TK10487 + 430 16 15 14 13 12 11 TK10487 3 4 5 6 7 8 Vcc X 0.01 Vcc 19 18 17 1 2 3 4 + 10 R 16 15 + 10 Part Number (X) C CDBKB455KCAY27-R0 14 3300p 13 12 11 8 9 10 68k 6 7 Vcc 0.01 C X 10 IF input 1.0k AF output + 0.01 R 33pF 5 0.1 Unit C : F R: 2k 0.01 20 TA31142F 9 10 C 0.1 2 0.1 1 1.2k 68k 68k 0.01 0.1 17 560p 2SC1048 10 18 91pF Vcc 2.2 0.01 19 R 1.5k TA31142 8.2k 20 C 91pF Unit C : F R: R Part Number (X) + CDBLA455KCAY28-B0 CDBLB455KCAY28-B0 CDBKB455KCAY28-R0 NE605 C R 22pF 3.3k 22pF 2.7k MC13136 IF input AF input 0.01 0.1 0.1 19 18 17 16 15 14 13 12 X 0.15 1k 20 R C 11 24 NE605 23 22 21 20 19 18 17 16 15 14 13 8 9 10 11 12 C MC13136 5 6 7 8 + 22 100k 0.1 9 100k 22k 10 1 Vcc 2 3 4 5 6 7 0.1 4 X R 0.01 3 5n 2 100k 150p 1 0.1 Vcc + 0.1 0.01 0.1 0.1 0.1 Part Number (X) CDBKB455KCAY29-R0 Part Number (X) C R 56pF 2.2k Unit C : F R: AF output CDBLA455KCAY34-B0 CDBLB455KCAY34-B0 TK10930 C R 100pF 1.2k IF input Unit C : F R: NE(SA)606/616 IF input TK10930 3 4 5 6 7 8 Vcc 9 C R1 + 10 Part Number (X) 19 18 R2 8.2k 0.01 Vcc 1 2 3 0.1 0.1 CDBKB455KCAY35-R0 20 17 16 15 14 0.1 13 12 11 8 9 10 NE606 or NE616 X + 2.2 Unit C : F R: IF input 21 AF output 10 11 12 0.1 2 0.1 1 0.01 0.1 24 23 22 21 20 19 18 17 16 15 14 13 C R1 R2 33pF 2.0k 1.0k 4 5 0.1 6 8.2k 0.1 Part Number (X) C R CDBLB455KCAX36-B0 22pF 4.7k - CDBKB455KCLX36-R0 27pF 2.2k 1mH 7 C 20k + X 2.2 L 2k R 0.1 L AF output Unit C : F R: Continued on the following page. 66 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit NE(SA)607/617 + 2.2 11 1 2 3 4 5 6 7 8 430 C 9 20 19 18 10 +10 1.5k 8.2k 0.01 0.01 15 14 13 1 X L 2 3 4 5 + 10 R 6 C R L CDBKB455KCLX39-R0 22pF 2.7k 1mH 7 8 9 10 X 0.1 IF input Unit C : F R: L:H AF output TK14590/14591 0.01 68k Unit C : F R: Part Number (X) R CDBLB455KCAY40-B0 3.3k CDBKB455KCAY40-R0 2.7k MC3361 Vcc (1.3V) AF output 0.01 100k 1 100k 100p 0.01 11 R + AF output Part Number (X) 12 + 0.1 0.1 16 TA31145 (TOSHIBA) 22k Vcc 17 3300p 5600p 12 68k 13 68k 14 560p 15 1000p 16 100k 17 NE607/617 (PHILIPS) 100k 18 0.1 19 10 20 0.1 0.1 0.1 51 TA31145 Vcc 0.01 IF input 0.15 0.1 1000p 0.1 24 23 22 21 20 19 18 17 16 15 14 13 16 TK14590V (TOKO) 5 6 0.1 7 8 X 100k IF input 1k 14 13 12 11 10 9 6 8 MC3361 1 2 3 4 5 7 0.01 Unit C : F R: 560p 0.0033 R 15 AF output 8.2k 9 10 11 12 C 100k 4 0.01 100k 3 0.1 2 0.1 1 100k 150k Vcc 0.1 0.1 22 47 0.01 1 X 0.1 0.022 Part Number (X) C R CDBLB455KCAY42-B0 22pF 3.3k IF input CXA3117 Unit C : F R: R Part Number (X) R CDBLB455KCAY49-B0 1.8k CDBKB455KCAY49-R0 1.5k NJM2590 Vcc + 100k AF out 24 23 22 21 20 19 18 17 16 15 14 13 100k 10 14 13 12 11 10 9 8 CXA3117(SONY) 1 2 3 4 5 6 7 1 Vcc X 33 0.01 8 1200p NJM2590(JRC) 9 10 11 12 1 1200p 1200p R 0.1 Unit C : F R: Part Number (X) R CDBLB455KCAY50-B0 8.2k CDBKB455KCAY50-R0 6.2k S.G. 51 2 5 4 3 0.1 6 7 10k R X + 10 Unit C : F R: 0.01 Part Number (X) R CDBCB455KCAY66-R0 3.0k AF output 21 67 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 470 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 450 460 Frequency (kHz) AF Output Voltage (mV) 500 440 470 440 CDBLA/CDBLB455KCLY09-B0 450 460 Frequency (kHz) 470 CDBKB455KCAY13-R0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) 470 CDBLA455KCAY09-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY09-R0 450 460 Frequency (kHz) T.H.D. (%) 450 460 Frequency (kHz) T.H.D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY07-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY07-R0 21 395 435 475 Frequency (kHz) 515 440 450 460 Frequency (kHz) 470 Continued on the following page. 68 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 485 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 435 475 Frequency (kHz) AF Output Voltage (mV) 500 395 515 440 CDBLA455KCAY16-B0 450 460 Frequency (kHz) 470 CDBLB455KCAX16-B0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) 470 CDBKB455KCAY16-R0 T.H.D. (%) AF Output Voltage (mV) CDBLA/CDBLB455KCLY13-B0 450 460 Frequency (kHz) T.H.D. (%) 445 465 Frequency (kHz) T.H.D. (%) 425 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY13A-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCLY13-R0 21 440 450 460 Frequency (kHz) 470 440 450 460 Frequency (kHz) 470 Continued on the following page. 69 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 450 460 Frequency (kHz) AF Output Voltage (mV) 500 440 470 440 CDBKB455KCAY28-R0 450 460 Frequency (kHz) 470 CDBLA/CDBLB455KCAY28-B0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) 470 CDBKB455KCAY27-R0 T.H.D. (%) AF Output Voltage (mV) CDBLA/CDBLB455KCAY24-B0 450 460 Frequency (kHz) T.H.D. (%) 450 460 Frequency (kHz) T.H.D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBKB455KCAY24-R0 T.H.D. (%) AF Output Voltage (mV) CDBLB455KCAX18-B0 21 440 450 460 Frequency (kHz) 470 440 450 460 Frequency (kHz) 470 Continued on the following page. 70 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 450 460 Frequency (kHz) CDBKB455KCLX36-R0 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 450 460 Frequency (kHz) 10 100 5 50 1 10 5 0.5 1 0.1 425 470 445 465 486 Frequency ( kHz ) 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 AF Output Voltage (mV) CDBKB455KCLX39-R0 T.H.D. (%) CDBLB455KCAX36-B0 AF Output Voltage (mV) 50 500 AF Output Voltage ( mV ) 500 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY35-R0 470 T.H.D. (%) 450 460 Frequency (kHz) 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 T. H. D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY34-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY29-R0 21 425 440 450 460 Frequency (kHz) 470 445 465 485 Frequency (kHz) Continued on the following page. 71 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve CDBLB455KCAY40-B0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 450 460 Frequency (kHz) 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 AF Output Voltage (mV) CDBKB455KCAY49-R0 T.H.D. (%) AF Output Voltage (mV) CDBLB455KCAY42-B0 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 440 450 460 Frequency (kHz) 470 450 460 470 Frequency (kHz) CDBLB455KCAY49-B0 CDBKB455KCAY50-R0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 AF Output Voltage (mV) 500 T. H. D. (%) AF Output Voltage (mV) 470 T. H. D. (%) 450 460 Frequency (kHz) T. H. D. (%) 440 T.H.D. (%) 50.0 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY40-R0 21 440 450 460 Frequency (kHz) 470 440 450 460 470 Frequency (kHz) Continued on the following page. 72 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve CDBKB455KCAY66-R0 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 450 460 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 470 450 460 T. H. D. (%) 100 T. H. D. (%) 50.0 AF Output Voltage (mV) 500 AF Output Voltage (mV) CDBLB455KCAY50-B0 470 Frequency (kHz) Frequency (kHz) Specified by S Curve Characteristics Nominal Center S Curve (1) Frequency (fn) Output Volt. at fn (kHz) (mV) Part Number CDBKB455KCAY54-R0 165 20 455 S Curve (2) at fn4.8kHz (mV) IC IC Maker Type 170 20 TA31149 TOSHIBA SMD For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity shoud be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit S Curve TA31149 CDBKB455KCAY54-R0 24 23 22 21 20 19 1000p 10 + 100k 430 100k Vcc Vcc Vcc 100k 18 17 16 15 14 13 0.3 TA31149(TOSHIBA) 6 IF input 7 8 9 10 11 12 + X R 0.1 Volt (V) 5 AF output 4 1000p 3 1200p 2 1500p 1 10 + 0.4 0.1 2.2 Vcc (W1.4V) 0.2 Unit C : F R: Part Number (X) R CDBKB455KCAY54-R0 2.7k 0.1 0.0 440 450 460 470 Frequency (kHz) 21 73 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment 0.30.2 MHz Type Ceramic Discriminators 1.4 max. 4.50.1 2.00.1 CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). 0.20.2 0.40.05 1.0 max. 4.1 max. 0.4(ref.) 0.4(ref.) 0.80.1 0.80.1 Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Recommended for Pb free soldering CDSCB Series 1.50.1 1.50.1 (in mm) Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) IC CDSCB10M7GA105A-R0 10.700 30kHz 220 min. 110 min. 1.5 max. TEA5757HL CDSCB10M7GA113-R0 10.700 30kHz 300 min. 110 min. 1.0 max. TA2154FN CDSCB10M7GA119-R0 10.700 30kHz 500 min. 75 min. 1.0 max. TRF6901 CDSCB10M7GA121-R0 10.700 30kHz 390 min. 80 min. 1.0 max. LV23100V CDSCB10M7GF072-R0 10.700 (fn) fn150 min. 130 min. 2.0 max. TA31161 CDSCB10M7GF109-R0 10.700 (fn) fn100 min. 170 min. 3.0 max. TK14588V Part Number (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. Test Circuit CDSCB10M7GA105A-R0 CDSCB10M7GA113-R0 Vcc (1.2V) 35 3 34 4 33 5 32 6 100k DC OUT 30 29 28 0.01 27 26 25 24 23 1 29 9 28 10 27 11 26 12 21 2 3 4 5 6 7 8 9 10 20 19 18 17 16 11 12 13 14 15 + X 30 8 22 TA2154FN (TOSHIBA) 31 TEA5757HL (PHILIPS) 7 S.S.G. S.S.G. 2.2 680p 2 0.01 + 100 0.01 10 + 48 47 46 45 44 43 42 41 40 39 38 37 0.1 1 36 0.01 0.1 0.01 Vcc (3.0V) D.C. OUT AF OUT X : CDSCB10M7GA113-R0 Unit C : F R: 10 25 150 AF OUT AFC (n) X 0.22 0.1 + 0.47 4.7 AFC (p) 330p 0.1 13 14 15 16 17 18 19 20 21 22 23 24 X : CDSCB10M7GA105A-R0 Unit C : F R: Continued on the following page. 22 74 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit CDSCB10M7GA119-R0 CDSCB10M7GA121-R0 Vcc (3.0V) IF Input 4.7 10p 0.015 22+ 82p 10 10p 15p 120p Vcc (3.2V) 0.01 220k 0.01 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 LV23100V (SANYO) 34 32 6 TRF6901 31 7 (TEXAS INSTRUMENTS) 30 8 29 9 28 11 26 12 25 13 14 15 16 17 18 19 20 21 22 23 24 0.01 7 8 0.047 9 10 11 12 13 14 15 16 17 18 + 47p + 0.47 0.01 27 100p 10 6 10k 5 5 10k + 10 1000p 33 4 4 3.3k 0.1 + 1 0.22 0.47 0.047 + S.G. 100p 10k + 100p 3 3 X 35 2 1 2 1 X 100 48 47 46 45 44 43 42 41 40 39 38 37 36 0.047 1 75 0.01 D.C. Output AF Output 68p 0.01 0.01 AF Output 18 17 16 15 14 13 12 11 10 PIC16F84 (Control IC) PIC16F84 1 2 3 4 5 1k 2.2 6 7 1 8 2 3 4 5 6 7 8 9 9 X : CDSCB10M7GA119-R0 Unit C : F R: L:H 10k + 10k 18 17 16 15 14 13 12 11 10 0.1 1k 2.2 X : CDSCB10M7GA121-R0 CDSCB10M7GF072-R0 + 10k 0.1 Unit C : F R: CDSCB10M7GF109-R0 Vcc (3V) 0.01 1.2 Vcc (3V) 4.7 R AF OUT R 0.01 X X 0.01 D.C. OUT 10p 13 12 11 10 8p 12k 9 51k 5 0.01 6 7 8 16 X : CDSCB10M7GF072-R0 R : 820 Unit C : F R: L:H + 33 0.01 14 13 12 11 10 9 7 8 TK14588V (TOKO) 1 2 3 4 5 51 IF IN 15 0.01 4 0.01 3 0.01 2 0.01 1 0.01 14 TA31161 (TOSHIBA) 6 + S.S.G. 0.01 15 4.7 16 AF OUT 0.01 1000p X : CDSCB10M7GF109-R0 R : 820 Unit C : F R: L:H Frequency Characteristics CDSCB10M7GA105A-R0 1000 CDSCB10M7GA113-R0 100 1000 10 100 100 AF Output 1 1 10 Distortion 10 1 1 0.1 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 T.H.D. (%) 10 T.H.D. (%) AF Output Voltage (mV) Distortion AF Output Voltage (mV) AF Output 100 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 1.2V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 22 Frequency (MHz) Continued on the following page. 75 P05E12.pdf 05.3.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics CDSCB10M7GA119-R0 1000 CDSCB10M7GA121-R0 1000 100 100 AF Output AF Output 100 1 1 10 Distortion 10 1 1 0.1 T.H.D. (%) Distortion 10 AF Output Voltage (mV) 10 T.H.D. (%) AF Output Voltage (mV) 100 0.1 Input = 100 dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.2V Input = 100 dB fdev. = 60kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 10.3 11.1 10.4 10.5 10.8 10.9 11.0 11.1 CDSCB10M7GF109-R0 100 100 10 100 10 10 1 10 1 10.3 0.1 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 0.1 1 Input = 100dB fdev. = 80kHz fmod. = 1kHz Vcc = 3.0V 10.3 T.H.D. (%) 1000 AF Output Voltage (mV) 100 1 76 10.7 1000 T.H.D. (%) AF Output Voltage (mV) CDSCB10M7GF072-R0 22 10.6 Frequency (MHz) Frequency (MHz) 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 Input = 100dB fdev. = 64kHz fmod. = 1kHz Vcc = 3.0V Filters for Communication Equipment 05.11.18 for IF SAW Filters o AMPS/ADC 4-1.270.13 3.80.2 Dot Marking(o0.2) 1.15max. 3.80.2 M 1.500.13 (0.20) (1) (5) (7) (6) (3) (4) 7-1.000.13 Pin 8-0.60.08 (8) SAFCG130MCA0T00 Marking : Laser Printing : EIAJ Code (2) (8) : Input (6) : Input (Ground) (4) : Output (2) : Output (Ground) Others : Ground (in mm) 1.90.2 Center Frequency (MHz) 3dB Bandwidth (kHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance SAFCG130MCA0T00 130.380 630 min. 5.5 max. (at fo point) - 310ohm//1.6H (Input) 310ohm//1.6H (Output) SAFCT85M3JB0X05 85.380 12 min. 5.5 max. (at min. loss point) 1.5 (fo12kHz) 870ohm//-1.8pF (Input) 870ohm//-1.8pF (Output) Part Number o DECT 7 Filters for Communication Equipment 7.00.2 Dot Marking(o0.3) 1.80.2 4-1.270.15 (0.90) 10-0.600.15 (10) (2) (9) (3) (1) (8) (4) (7) (6) (5) 9-1.00.2 Marking : Laser Printing : EIAJ Code (9) : Input (4) : Output Others : Ground (in mm) 3.50.2 Part Number SAFCT110MCB1T00 2-2.540.15 1.8 max. 5.00.2 M Center Frequency (MHz) 3dB Bandwidth (kHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance 110.592 576 min. 4.5 max. (at min. loss point) - 300ohm//1.2H (Input) 300ohm//1.2H (Output) !Note * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc. * You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications. 291 Filters for Communication Equipment 05.11.18 o GPS 3.00.2 1.15max. M 1.00.1 0.60.2 4-1.500.15 3.00.2 Dot Marking(o0.5) (1) (2) (3) 1.5 0.1 2.55 0.1 (6) (5) 2.3 2.5 0.1 0.1 (0.20) (4) 2.5 2.3 0.1 0.1 : Electrode Marking : Laser Printing : EIAJ Code (5) (1) SAFCC110MCA1T00 Pin 6-0.600.15 (2) (4) 0.40.1 (3) (6) 5-0.750.20 0.750.20 1.500.20 2.0 max. 9.60.2 0.750.10 (3) : Input (2) : Input (or Ground) (6) : Output (5) : Output (or Ground) Others : Ground (in mm) (6) (5) M SAFJA35M4WC0Z00R03 (4) (1) Input or Ground (2) Ground (3) Output (4) Output or Ground (5) Ground (6) Input (in mm) 35.42C (1) 5.10.2 (2) (3) Center Frequency (MHz) 3dB Bandwidth (MHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance SAFCC110MCA1T00 110.0 1.023 min. 3.7 max. (at min. loss point) 0.6 480ohm//-1.6H (Input) 650ohm//-1.6H (Output) SAFJA35M4WC0Z00R03 35.42 (fn) 1.90 min. (1dB Bandwidth) 20.5 max. (at fn) 1.6 (within 34.62 to 36.22MHz) 14.3k ohm//5.1pF (Input) 4k ohm//5.1pF (Output) SAFJA35M4WC0Z00R10 35.42 (fn) 1.9 min. (1dB Bandwidth) 20.5 max. (at fn) 1.6 (within 34.62 to 36.22MHz) 14.3k ohm//5.1pF (Input) 4k ohm//5.1pF (Output) Part Number 0.750.20 1.500.20 (6) (3) : Input (6) : Output Others : Ground (2) (1) SAFCC243MRB9X00 0.750.20 1.500.20 5-0.750.20 0.750.10 4-1.500.15 3.00.2 Marking : Laser Printing : EIAJ Code (3) 0.40.1 (5) (0.20) (0.10) (4) 6-0.600.15 (1) 0.40.1 (2) SAFDA243MRD9X00 (0.15) Marking : Laser Printing : EIAJ Code (3) M 1.15 max. 0.85 max. 3.00.2 M 3.00.2 Dot Marking (o0.5) (4) (5) (6) 6-0.600.15 3.00.2 Dot Marking (o0.5) (0.10) Filters for Communication Equipment 7 4-1.500.15 o PHS Pin (3) : Input (6) : Output Others : Ground 5-0.750.20 0.750.10 (in mm) (in mm) Center Frequency (MHz) 3dB Bandwidth (kHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance SAFDA243MRD9X00 243.95 130 min. 4.5 max. (at fo point) 1.0 (fo100kHz) 760ohm//-1.0pF (Input) 760ohm//-0.8pF (Output) SAFDA265MRD5X00 265.55 130 min. 4.5 max. (at fo point) 1 (fo100kHz) 740ohm//-1.0pF (Input) 820ohm//-0.9pF (Output) SAFCC243MRB9X00 243.95 130 min. 4.5 max. (at min. loss point) 1.0 (fo100kHz) 760ohm//-1.0pF (Input) 760ohm//-0.8pF (Output) SAFCC265MRB5X01 265.55 130 min. 4.5 max. (at fo point) 1.0 (fo100kHz) 740ohm//-1.0pF (Input) 820ohm//-0.9pF (Output) Part Number 292 !Note * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc. * You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications. Filters for Communication Equipment 05.11.18 o Wireless LAN (1) (2) (3) (5) (4) 1.50.1 2.550.1 1.00.1 0.60.2 : Electrode (6) 2.0max. 2.3 2.5 2.5 2.3 0.1 0.1 0.1 0.1 9.60.2 5.10.2 (6) (5) (4) (1) (2) (3) (1) (2) (3) (4) (5) (6) Ground Ground Output Output Ground Input (in mm) Part Number Center Frequency (MHz) 3dB Bandwidth (MHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance SAFJA43M0WC0Z00R03 43.00 0.1MHz (fo) 1.25 min. 21.0 max. (at fo point) - - 3.00.2 M 7 1.15 max. (5) (2) (6) (7) (1) 6-0.750.20 4-1.500.20 (8) 0.750.20 SAFCD450MCL0N00 (4) (3) 8-0.600.15 1.200.20 (0.20) Marking : Laser Printing : EIAJ Code Pin (3) : Input (1) : Input (Ground) (7) : Output (5) : Output (Ground) Others : Ground (in mm) Center Frequency (MHz) 3dB Bandwidth (MHz) Insertion Loss (dB) Ripple (dB max.) Input/Output Impedance SAFCD450MCL0N00 450 8.2 min. 4.5 max. (at min. loss point) 1.5 (fo8.2MHz) 200ohm//150nH (Input) 200ohm//150nH (Output) SAFCD570MCL0N00 570 8.5 min. (2dB Bandwidth) 7.0 max. (fo8.5MHz) 2.0 (fo8.5MHz) 200ohm//100nH (Input) 200ohm//100nH (Output) Part Number !Note * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc. * You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications. 293 Filters for Communication Equipment 3.00.2 Dot Marking(o0.5) 4-1.500.15 o 5G W-LAN Filters for Communication Equipment 05.11.18 for IF 4-1.500.15 BGS Filters 3.00.2 3.00.2 Dot Marking (o0.5) 1.15 max. M (0.10) (0.20) Marking : Laser Printing : EIAJ Code (2) 6-0.600.15 0.40.1 (3) (4) (5) (1) (6) Pin (3) : Input (6) : Output Others : Ground 5-0.750.20 0.750.20 1.500.20 0.750.10 Part Number (in mm) Nominal Center Frequency(fn) (MHz) 3dB Bandwidth (MHz) 40.00 fn1.75 min. MKFCC40M0CC0P00R05 for IF (4) (10) (5) (9) (8) (7) (6) 0.30.2 0.400.15 0.40.2 1.50.1 0.80.1 3.20.2 (1) (2) (3) 2.50.2 Directional Input Mark 0.30.2 Filters for Communication Equipment 7 0.400.15 0.400.15 Chip LC Filters (Balance-balance Type) 0.600.15 1.00.1 (1)(3) (2)(7) (4)(5)(9)(10) (6)(8) : : : : Balance IN NC1 NC2 Balance OUT (in mm) LFB32130MSH3A569 Terminal of "NC1" should be fixed to the no connected pattern. Terminal of "NC2" should not be fixed to any pattern. All the technical data and Information contained herein are subject to change without prior notice. Part Number Nominal Center Frequency (fo) (MHz) LFB32130MSH3A569 LFB32166MSH2A570 294 Bandwidth (BW) (MHz) Insertion Loss in BW (dB) Input Balance Impedance (Differential) (Nom.) (ohm) Output Balance Impedance (Differential) (Nom.) (ohm) 130.38 fo0.7 5 max. (at 25C) 1000 250 166.85 fo0.65 5 max. (at 25C) 300 300 !Note * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc. * You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications. Filters for Communication Equipment 05.11.18 for IF Chip LC Filters (Balance-unbalance Type) 1.50.1 (10) (4) (9) (5) (8) (7) 0.60.15 0.40.2 (6) 0.80.1 0.30.2 (3) 0.40.15 2.50.2 (2) 0.40.15 3.20.2 (1) 0.30.2 (1)(3) : (2)(7) : (4)(5)(9)(10) : (6) : (8) : 0.40.15 LFB32130MSQ1A552 Balance IN GND NC2 Unbalance OUT NC1 (Biasing terminal) 1.00.1 Terminal of "NC1" should be fixed to the no connected pattern. Terminal of "NC2" should not be fixed to any pattern. All the technical data and Information contained herein are subject to change without prior notice. (in mm) Part Number Nominal Center Frequency (fo) (MHz) Bandwidth (BW) (MHz) Insertion Loss in BW (dB) Balance Impedance (Differential) (Nom.) (ohm) Unbalance Impedance (Nom.) (ohm) LFB32130MSQ1A552 130.38 fo0.65 5.5 max. (at 25C) 1000 50 LFB32166MSQ1A527 166.85 fo0.7 4 max. (at 25C) 200 50 Filters for Communication Equipment 7 !Note * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Especially, please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in them to prevent smoking and/or burning, etc. * You are able to read a detailed specifications in the website (http://search.murata.co.jp/) before to require our product specifications or to transact the approval sheet for product specifications. 295