MX553ABA106M250 Ultra-low Jitter 106.25MHz LVPECL XO ClockWorksTM FUSION General Description Features The MX553ABA106M250 is an ultra-low phase jitter XO with LVPECL output optimized for high line rate applications. * 106.25MHz LVPECL * Typical phase noise: - 100fs (Integration range: 1.875MHz-20MHz) * 50ppm total frequency stability * -40C to +85C temperature range * Industry standard 6-Pin 5mm x 3.2mm LGA package Applications * Fibre Channel 10G/12G SERDES Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+3.6V Lead Temperature (soldering, 10s)..............................260C Storage Temperature (TS).............................................125C ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40C to +85C Electrical Characteristics VDD = 2.375 - 3.63V, TA = -40C to +85C, outputs terminated with 50 Ohms to VDD - 2V. Symbol Parameter IDD Supply Current F0 Center Frequency Condition Min. Typ. Max. Units 120 mA 106.25 Frequency Stability Note 2 Oj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time Duty Cycle MHz 50 220 100 ppm fsRMS 20 ms 85 350 ps 45 55 % VOH Output High Voltage LVPECL output levels VDD - 1.35 VDD - 1.01 VDD - 0.8 V VOL Output Low Voltage LVPECL output levels VDD - 2.0 VDD - 1.78 VDD - 1.6 V Vswing Peak to Peak Output Voltage Swing 0.65 0.77 0.95 V Notes: 1. Guaranteed after thermal equilibrium. 2. Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40C to +85C. ClockWorks is a registered trademark of Micrel, Inc Micrel Inc. * 2180 Fortune Drive * San Jose, CA 95131 * USA * tel +1 (408) 944-0800 * fax + 1 (408) 474-1000 * http://www.micrel.com March 11, 2015 MX553AB1-2817 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Micrel, Inc. MX553ABA106M250 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX553ABA106M250 MX553A BA1062 Tube 6-Pin 5mm x 3.2mm LGA MX553ABA106M250 TR MX553A BA1062 Tape and Reel 6-Pin 5mm x 3.2mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR March 11, 2015 MX553AB1-2817 Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up Make no connection, leave floating. Power Supply Ground LVPECL Clock Output Frequency = 106.25MHz Power Supply 2 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Micrel, Inc. MX553ABA106M250 Package Information and Recommended Land Pattern for 6-Pin LGA 6-Pin LGA (5x3.2mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.micrel.com. MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel's terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. (c) 2015 Micrel, Incorporated. March 11, 2015 MX553AB1-2817 3 Revision 1.0 tcghelp@micrel.com or (408) 955-1690