DF005M-G thru DF10M-G
Features
- Plastic package used has Underwriters
Laboratory Flammability Classification 94V-0
- Glass passivated chip junction
- High surge overload rating of 50 Amperes peak
- High temperature soldering guaranteed:
260°C/10 seconds, at 5 lbs. (2.3kg) tension
Mechanical Data
- Case: Molded plastic body over passivated
junctions
- Terminals: Plated leads solderable per MIL-
STD-750, Method 2026
- Mounting Position: Any
- Weight: 0.014 oz., 0.4 g
Single-Phase Bridge Rectifiers
www.comchiptech.com
COMCHIP
MDS0312008A Page 1
Reverse Voltage: 50 to 1000V
Forward Current: 1.0A
0.315 (8.00)
0.285 (7.24)
0.013 (3.3)
0.0086 (0.22)
0.350 (8.9)
0.300 (7.6)
0.255 (6.5)
0.245 (6.2)
0.335 (8.51)
0.320 (8.12)
0.080 (2.03)
0.050 (1.27)
0.023 (0.58)
0.018 (0.46)
0.185 (4.69)
0.150 (3.81)
0.130 (3.3)
0.120 (3.05)
0.075 (1.90)
0.055 (1.39)
0.205 (5.2)
0.195 (5.0)
Dimensions in inches and (millimeters)
DF-M
0.045 (1.14)
0.035 (0.89)
Maximum Ratings & Thermal Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
DF DF DF DF DF DF DF
Parameter
Symbol 005M-G 01M-G 02M-G 04M-G 06M-G 08M-G 10M-G Unit
Device Marking Code DF005 DF01 DF02 DF04 DF06 DF08 DF10
Maximum repetitive peak reverse voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC blocking voltage V
DC
50 100 200 400 600 800 1000 V
Max. average forward output rectified current at T
A
=40°C I
F(AV)
1.0 A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method) I
FSM
50 A
Rating for fusing (t < 8.3ms) I2t10A
2sec
Typical ther mal resistance per leg
(NOTE 1)
R
θJA
40
R
θJL
15 °C/W
Operating junction and storage temperature range
T
J
, T
STG
– 55 to +150 °C
Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
DF DF DF DF DF DF DF
Parameter
Symbol 005M-G 01M-G 02M-G 04M-G 06M-G 08M-G 10M-G Unit
Maximum instantaneous forward voltage drop
per leg at 1.0A V
F
1.1 V
Maximum reverse current T
A
= 25°C 5.0
at rated DC blocking voltage per leg T
A
= 125°C I
R
500 μA
Typical junction capacitance per leg at 4.0V, 1MHz C
J
25 pF
Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads
Single-Phase Bridge Rectifiers
www.comchiptech.com
COMCHIP
MDS0312008A Page 2
0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1
10
110 100
1
10
100
20 40 60 80 100 120 140 150
0
0.5
1.0
110 100
0
10
20
30
40
50
60
020 40 60 80 100
0.01
0.1
1
10
100
0.01 0.1 110 100
0.1
1
10
100
Fig. 1 - Derating Curve Output
Rectified Current Fig. 2 - Maximum Non-Repetitive Peak
Forward Surge Current Per Leg
Fig. 4 - Typical Reverse Leakage
Characteristics Per Leg
Fig. 6 - Typical Transient Thermal
Impedance
Fig. 3 - Typical Forward Characteristics
Per Leg
Fig. 5 - Typical Junction Capacitance
Per Leg
Average Forward Output Current (A)
Average Forward Output Current (A)
Instantaneous Reverse Current (μA)Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)Junction Capacitance (pF)
Ambient Temperature (°C) Number of Cycles at 60 Hz
Percent of Rated Peak Reverse Voltage (V)
t, Heating Time (sec.)
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
60 HZ
Resistive or
Inductive Load
P.C.B mounted on
0.51 x 0.51" (13 x 13mm)
Copper pads with 0.06"
(1.5mm) lead length
T
J
= 25°C
Pulse width = 300μs
1% Duty Cycle
T
J
= 150°C
Single Sine-Wave
(JEDEC Method)
T
J
= 25° C
f = 1.0MHz
Vsig = 50mVp-p
1.0 Cycle
T
J
= 125°C
T
J
= 25°C
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)
