PX1004 - MURATA MANUFACTURING

PX10004 (R) 2/12/15 Page 1 of 5 www.murata.com

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units

Nominal Center Frequency fC182.200 MHz

Passband Insertion Loss at fc IL 34.0dB

3 dB Passband BW3

1, 2

±15 ±25 kHz

Amplitude Ripple over fc ±15 kHz 1.0 dBP-P

Group Delay Variation over fc ±10 kHz GDV 2.5 6.0 µsP-P

Third-Order Intermod. for -20 dBm tones at fc ±60 & 120 kHz -95 dBm

Rejection fc ±60 kHz

1, 2, 3

10 16

dBfc -880 kHz to fc -940 kHz 65 68

Ultimate 65

Operating Temperature Range TA1-20 +70 °C

Impedance Matching to 50 Ω unbalanced External L-C

Case Style SM13365-12 13.3 X 6.5 mm Nominal Footprint

Lid Symbolization (YY=year, WW=week) See note 4 RFM PX1004 YYWW

SM13365-12

• Designed for TDMA IS-54 / CDPD IF Applications

• Low Insertion Loss

• Excellent Selectivity

• Hermetic 13.3 X 6.5 mm Surface-Mount Case

• Unbalanced Input and Output

• Complies with Directive 2002/95/EC (RoHS)

Absolute Maximum Ratings

Rating Value Units

Maximum Incident Power in Passband +10 dBm

Max. DC voltage between any 2 terminals 30 VDC

Storage Temperature Range -40 to +85 °C

Suitable for lead-free soldering - Max Soldering Profile 260°C for 30 s

82.2 MHz

SAW Filter

PX10004

1. Unless noted otherwise, all specifications apply over the operating temperature

range with filter soldered to the specified demonstration board with impedance

matching to 50 Ω and measured with 50 Ω network analyzer.

2. Unless noted otherwise, all frequency specifications are referenced to the

nominal center frequency, fc.

3. Rejection is measured as attenuation below the minimum IL point in the

passband. Rejection in final user application is dependent on PCB layout and

external impedance matching design. See Application Note No. 42 for details.

4. "LRIP" or "L" after the part number indicates "low rate initial production" and

"ENG" or "E" indicates "engineering prototypes."

5. The design, manufacturing process, and specifications of this filter are subject

to change.

6. Either Port 1 or Port 2 may be used for either input or output in the design.

However, impedances and impedance matching may vary between Port 1 and

Port 2, so that the filter must always be installed in one direction per the circuit

design.

7. US and international patents may apply.

8. Murata, stylized Murata logo, and Murata N.A., Inc. are registered

trademarks of Murata Manufacturing Co., Ltd.

Caution: Electrostatic Sensitive Device. Observe precautions for handling.

NOTES:

Electrical Connections

Connection Terminals

Port 1Hot 2

Port 1 Gnd Return 3

Port 2 Hot 8

Port 2 Gnd Return 9

Case Ground All Others

Pb

PX10004 (R) 2/12/15 Page 2 of 5 www.murata.com

PX10004 (R) 2/12/15 Page 3 of 5 www.murata.com

PX10004 (R) 2/12/15 Page 4 of 5 www.murata.com

Tape and Reel Specifications

Quantity Per Reel

100 Min

1000 Max

USER DIRECTION OF FEED

COMPONENT ORIENTATION and DIMENSIONS

Carrier Tape Dimensions

Ao 7.0 mm

Bo 13.8 mm

Ko 2.0 mm

Pitch 12.0 mm

W24.0 mm

PIN #1

See Detail "A"

13.0

20.2

2.0

12.0

100 REF.

"B" REF.

21.0

254

24.4

PX10004 (R) 2/12/15 Page 5 of 5 www.murata.com

SM13365-12 Case

Case Dimensions

Dimension mm Inches

Min Nom Max Min Nom Max

A13.08 13.31 13.60 0.515 0.524 0.535

B6.27 6.50 6.80 0.247 0.256 0.268

C1.91 2.00 0.075 0.079

D1.50 0.059

E0.79 0.031

H1.0 0.039

P2.54 0.100

12-Terminal Ceramic Surface-Mount Case

13.3 x 6.5 mm Nominal Footprint

Materials

Solder Pad

Termination

Au plating 30 - 60 uInches (76.2-152 uM) over 80-200

uInches (203-508 uM) Ni.

Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phos-

phorus) 100-200 uInches Thick

Body Al2O3 Ceramic

Pb Free

C

H

P (8 Places)

E (10 Places)

D

B

A

4

5

6

7

1

12

11

10

3

98

2

TOP VIEW BOTTOM VIEW

23

89

1

12

11

10

4

5

6

7

0.034 TYP.

0.100 TYP.

(0.86)

(2.54)

0.077 TYP.

(1.96)

0.555

(14.10)

0.287

(7.29)

0.334 REF.

(8.48)