2MBI800U4G-120 - Fuji Electric

Device Name :

IGBT-Module

Type Name : 2MBI800U4G-120

Spec. No. : MS5F07032

Fuji Electric Device Technology Co.,Ltd.

Matsumoto Factory

H04-004-007

Specification

(800A/1200V-2in1 IGBT-Module)

141

MS5F07032

DRAWN

CHECKED S.Miyashita

NAME

CHECKED 07- Feb - 08

07- Feb - 08

DWG.No.

T.Miyasaka

T.Nishimura

J.Komatsu

APPROVALDATE

07- Feb - 08

This material and the information herein is the property of Fuji

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

H04-004-006

- -

Drawn

- -

Checked Checked

enactment --Issued

data -

Ind. Content Applied

date

- -

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

- -

- - - -

- -

Date

07- Feb- 08

- -

DWG.No.

Revised Records

Approved

- -

Classifi -

cation

S.Miyashita

- -

J.Komatsu T.Miyasaka

142

MS5F07032

1. Outline Drawing ( Unit : mm )

2. Equivalent circuit

H04-004-003

Type Name : 2MBI800U4G-120 ／　PKG.No. M256

143

MS5F07032

DWG.No.

express written consent of Fuji Electric Device Technology Co.,Ltd.

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

main emitter

main collector

gate

sense emitter

sense collector

main emitter

main collector

sense collector

sense emitter

gate

3.Absolute Maximum Ratings ( at Tc= 25°C unless otherwise specified ）

Tc=25°C

Tc=80°C

Tc=25°C

Tc=80°C

(*1) All terminals should be connected together when isolation test will be done.

(*2) Recommendable Value : Mounting 4.25~5.75 Nm (M6)

Main Terminals 8~10 Nm (M8)

Sense Terminals 1.7~2.5 Nm (M4)

4. Electrical characteristics ( at Tj= 25°C unless otherwise specified)

H04-004-003

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

tr - 0.65

Ic = 800A

- 90

6.5

VCE(sat)

(main terminal)

Cies

VCE(sat)

(chip)

Tj= 25°C

Tj=125°C

Tj= 25°C

Tj=125°C

VGE(th)

VGE=15V

144

MS5F07032

2.04

1.75

μsIF = 800A

0.45 -

2.32

2.10 -

DWG.No.

- 0.80

1.87

1.97

Units

- 1.90 2.05

Maximum

Ratings

- 2.12 2.29

1.0 mA

7.5 V

-40 ~ +125

Ic = 800mA

1600

VCE = 20V

VGE=±20V

VCE = 0V - -

5.5

Tstg

Conditions

Storage temperature

Isolation

voltage Viso

Items Symbols

between terminal and copper base *1

1600

4800

1ms

Units

max.typ.min.

Char acter istics

5.75

Gate-Emitter voltage

Collector current

Junction temperature

Collector Power Dissipation

-Ic pulse

°C

W1 device

150

-Ic 800

2500 VAC

N m

AC : 1min.

1ms

±20 V

Items Symbols Conditions

VCESCollector-Emitter voltage

VGES

1200

Icp

1200

800

2400

1600

Continuous

trr -

(chip)

Tj= 25°C -

Tj=125°C

IF = 800A -

Vcc = 600V

Ic = 800A

VGE=±15V,Tj=125℃

(main terminal)

VGE=0V -

1.65 1.80

Tj= 25°C -

-Tj=125°C

Collector-Emitter

saturation voltage

Zero gate voltage

Collector current

Gate-Emitter

leakage current

Reverse recovery

Turn-on

0.27

Rgon = 5.6 Ω

Rgoff = 1.5 Ω

Lead resistance, terminal-chip

Turn-off

ton

toff

0.20

- mΩR lead -

Mounting

Main Terminals

Gate-Emitter

threshold voltage

VGE = 0V

VCE = 1200V

IGES

ICES

Screw Torque *2

Input capacitance

Forward on voltage

μs

Sense Terminals 2.5

VCE=10V,VGE=0V,f=1MHz

- 1.35 -

5. Thermal resistance characteristics

* This is the value which is defined mounting on the additional cooling fin with thermal compound.

6. Indication on module

This specification is applied to IGBT Module named 2MBI800U4G-120 .

8.Storage and transportation notes

・The module should be stored at a standard temperature of 5 to 35°C and humidity of 45 to 75% .

・Store modules in a place with few temperature changes in order to avoid condensation on the module surface.

・Avoid exposure to corrosive gases and dust.

・Avoid excessive external force on the module.

・Store modules with unprocessed terminals.

・Do not drop or otherwise shock the modules when transporting.

9. Definitions of switching time

10. Packing and Labeling

Display on the packing box

- Logo of production

- Type name

- Lot No

- Products quantity in a packing box

H04-004-003

express written consent of Fuji Electric Device Technology Co.,Ltd.

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

DWG.No.

145

MS5F07032

Items Symbols Conditions Character istics Units

min. typ. max.

with Thermal Compound (*)

- 0.006

Thermal resistance(1device)

Contact Thermal resistance(1device)

Rth(j-c)

Rth(c-f)

°C/W

- 0.026

- - 0.045

IGBT

FWD

Vcc

VCE

VGE

VCE

10%

90%

10% 10%

90%

VCE

～～

o n

r ( i )

o f f

r r

２ＭＢＩ８００Ｕ４Ｇ－１２０

Typ.Name Lot No. for Fuji

Place of manufucturing Display (16 DIGITS)

８００Ａ　１２００Ｖ

Rating

H04-004-003

11.Reliability test results

146

MS5F07032

DWG.No.

express written consent of Fuji Electric Device Technology Co.,Ltd.

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

Reliability Test Items

Test

cate-

gories

Test items Test methods and conditions

Reference

norms

EIAJ ED-4701

(Aug.-2001 edition)

Number

of sample

Accept-

ance

number

1 Terminal Strength Pull force : 40N Test Method 401 5 ( 0 : 1 )

(Pull test) Test time :

10±1 sec.

Method

Ⅰ

2 Mounting Strength Screw torque :

1.8 ~ 2.1 N·m (M4)

Test Method 402 5 ( 0 : 1 )

4.25 ~ 5.75 N·m (M6)

Method

Ⅱ

8.0~ 10.0 N·m (M8)

Test time :

10±1 sec.

3 Vibration Range of frequency : 10 ~ 500Hz Test Method 403 5 ( 0 : 1 )

Sweeping time : 15 min. Reference 1

Acceleration :

100m/s

2Condition code B

Sweeping direction : Each X,Y,Z axis

Test time : 6 hr. (2hr./direction)

4 Shock Maximum acceleration :

1000m/s

2Test Method 404 5 ( 0 : 1 )

Pulse width : 6.0msec. Condition code A

Direction : Each X,Y,Z axis

Test time : 3 times/direction

1 High Temperature Storage temp. :

125±5 ℃

Test Method 201 5 ( 0 : 1 )

Storage Test duration : 1000hr.

2 Low Temperature Storage temp. :

-40±5 ℃

Test Method 202 5 ( 0 : 1 )

Storage Test duration : 1000hr.

3 Temperature Storage temp. :

85±2 ℃

Test Method 103 5 ( 0 : 1 )

Humidity Relative humidity :

85±5%

Test code C

Storage Test duration : 1000hr.

4 Unsaturated Test temp. : 120

℃

Test Method 103 5 ( 0 : 1 )

Pressurized Vapor Test humidity :

85±5%

Test code E

Test duration : 96hr.

5 Temperature Test Method 105 5 ( 0 : 1 )

Cycle Test temp. : Low temp. -40

℃

High temp. 125

℃

RT 5 ~ 35

℃

Dwell time : High ~ RT ~ Low ~ RT

1hr. 0.5hr. 1hr. 0.5hr.

Number of cycles : 100 cycles

6 Thermal Shock +0 Test Method 307 5 ( 0 : 1 )

Test temp. : High temp. 100

-5

℃

Method

Ⅰ

+5 Condition code A

Low temp. 0

-0

℃

Used liquid : Water with ice and boiling water

Dipping time : 5 min. par each temp.

Transfer time : 10 sec.

Number of cycles : 10 cycles

Mechanical Tests

Environment Tests

H04-004-003

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

DWG.No.

147

MS5F07032

Reliability Test Items

Test

cate-

gories

Test items Test methods and conditions

Reference

norms

EIAJ ED-4701

(Aug.-2001 edition)

Number

of sample

Accept-

ance

number

1 High temperature Test Method 101 5 ( 0 : 1 )

Reverse Bias Test temp. : Ta = 125

℃

(Tj

≦

150

℃

)

Bias Voltage :

VC = 0.8×VCES

Bias Method : Applied DC voltage to C-E

VGE = 0V

Test duration : 1000hr.

2 High temperature Test Method 101 5 ( 0 : 1 )

Bias (for gate) Test temp. : Ta = 125

℃

(Tj

≦

150

℃

)

Bias Voltage : VC = VGE = +20V or -20V

Bias Method : Applied DC voltage to G-E

VCE = 0V

Test duration : 1000hr.

3 Temperature Test Method 102 5 ( 0 : 1 )

Humidity Bias Test temp. : 85

2 oCCondition code C

Relative humidity : 85

Bias Voltage :

VC = 0.8×VCES

Bias Method : Applied DC voltage to C-E

VGE = 0V

Test duration : 1000hr.

4 Intermitted ON time : 2 sec. Test Method 106 5 ( 0 : 1 )

Operating Life OFF time : 18 sec.

(Power cycle) Test temp. : 

Tj=100±5 deg

( for IGBT ) Tj

≦

150

℃, Ta=25±5 ℃

Number of cycles : 15000 cycles

Endurance TestsEndurance Tests

Failure Criteria

Item Characteristic Symbol Failure criteria Unit Note

Lower limit Upper limit

Electrical Leakage current ICES -

USL×2

characteristic

±IGES

USL×2

A

Gate threshold voltage VGE(th)

LSL×0.8 USL×1.2

Saturation voltage VCE(sat) -

USL×1.2

Forward voltage VF -

USL×1.2

Thermal IGBT  VGE -

USL×1.2

resistance or  VCE

FWD  VF -

USL×1.2

Isolation voltage Viso Broken insulation -

Visual Visual inspection

inspection Peeling - The visual sample -

Plating

and the others

LSL : Lower specified limit.

USL : Upper specified limit.

Note : Each parameter measurement read-outs shall be made after stabilizing the components at room

ambient for 2 hours minimum, 24 hours maximum after removal from the tests. And in case of the

wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry

completely before the measurement.

Each parameter measurement read-outs shall be made after stabilizing the components at room

ambient for 2 hours minimum, 24 hours maximum after removal from the tests. And in case of the

wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry

completely before the measurement.

H04-004-003

express written consent of Fuji Electric Device Technology Co.,Ltd.

Test Method 103

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

Environment Tests

1 High Temperature Storage

148

MS5F07032

DWG.No.

Reliability Test Items

Test

cate-

gories

Test items

Reference norms

EIAJ ED-4701

(Aug.-2001 edition)

Number

of test

sample

Number

failure

sample

Mechanical Tests

1Terminal Strength Test Method 401

2 Mounting Strength Test Method 402

4 Shock Test Method 404

5 0

(Pull test) Method Ⅰ

Method Ⅱ

3 Vibration Test Method 403 5 0

Condition code B

2 Low Temperature Storage Test Method 202

5 0

Condition code B

5 0

Test Method 201

3Temperature Humidity Test Method 103 5

Storage Test code C

5 0

4Unsaturated

Pressurized Vapor Test code E

5 Temperature Cycle Test Method 105

6 Thermal Shock

Test Method 307

Endurance Tests

1High temperature Test Method 101

Reverse Bias

Test Method 101

( for gate )

3 Temperature Humidity Bias Test Method 102

0method Ⅰ

Condition code A

5 0

Condition code C

2High temperature Bias 5 0

( Power cycling )

( for IGBT )

Intermitted Operating Life

Test Method 106 5

H04-004-003

express written consent of Fuji Electric Device Technology Co.,Ltd.

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

Capacitance vs. Collector-Emitter voltage (typ.) Dynamic Gate charge (typ.)

149

MS5F07032

Tj= 25°C

DWG.No.

VGE=0V, f= 1MHz, Tj= 25°C

Collector current vs. Collector-Emitter voltage (typ.)

Collector-Emitter voltage vs. Gate-Emitter voltage (typ.)

Tj= 125°C, chip

Tj=25℃,chip

Collector-Emitter voltage vs. Gate-Emitter voltage (typ.)

Collector current vs. Collector-Emitter voltage (typ.)

Tj=25℃,chip

VGE=+15V,chip

200

400

600

800

1000

1200

1400

1600

1800

0.0 1.0 2.0 3.0 4.0 5.0

Collector current : Ic [A]

Collector-Emitter voltage : VCE [V]

VGE=20

15V

12V

10V

200

400

600

800

1000

1200

1400

1600

1800

0.0 1.0 2.0 3.0 4.0 5.0

Collector current : Ic [A]

Collector-Emitter voltage : VCE [V]

VGE=20

15V

12V

10V

200

400

600

800

1000

1200

1400

1600

1800

0 1 2 3 4 5

Collector current : Ic [A]

Collector-Emitter voltage : VCE [V]

Tj=125°C

Tj=25°

5 10 15 20 25

Collector - Emitter voltage : VCE [ V ]

Gate - Emitter voltage : VGE [ V ]

Ic=1600A

Ic=800A

Ic=400A

100

1000

0 10 20 30

Capacitance : Cies, Coes, Cres [ nF ]

Collector-Emitter voltage : VCE [V]

Cies

oes

res

200

400

600

800

1000

0 1000 2000 3000 4000

Gate charge : Qg [ nC ]

Collector-Emitter voltage:VCE[V]

Gate-Emitter voltage:VGE[V]

VGE

VCE

H04-004-003

Reverse bias safe operating area (max.)

Vcc=600V, VGE=±15V, Rgon=5.6Ω, Rgoff=1.5Ω, Tj= １25°C

express written consent of Fuji Electric Device Technology Co.,Ltd.

Switching time vs. Collector current (typ.) Switching time vs. Gate resistance (typ.)

Switching loss vs. Collector current (typ.)

Vcc=600V, Ic=800A,VGE=±15V, Tj= １25°CVcc=600V, VGE=±15V, Rgon=5.6Ω, Rgoff=1.5Ω, Tj= １25°C

Switching loss vs. Gate resistance (typ.)

Vcc=600V, Ic=800A,VGE=±15V, Tj= １25°C

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

DWG.No.

1410

MS5F07032

±VGE=15V ,Tj = 125°C　/ chip

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

0 200 400 600 800 1000 1200 1400

Switching time : ton, tr, toff, tf [ us ]

Collector current : Ic [ A ]

ton

toff

0.0

1.0

2.0

3.0

4.0

5.0

6.0

0 4 8 12 16 20 24 28

Switching time : ton, tr, toff, tf [ us ]

Gate resistance : Rg [ Ω ]

toff

ton

100

150

200

250

300

350

0 200 400 600 800 1000 1200 1400

Switching loss : Eon, Eoff, Err [ mJ/pulse ]

Collector current : Ic [ A ] , Forward current : IF [ A ]

Eon

Eoff

Err

100

200

300

400

500

600

700

0 4 8 12 16 20 24 28

Switching loss : Eon, Eoff, Err [ mJ/pulse ]

Gate resistance : Rg [ Ω ]

Eoff

Err

Eon

200

400

600

800

1000

1200

1400

1600

1800

0 200 400 600 800 1000 1200 1400

Collector current : Ic [ A ]

Collector - Emitter voltage : VCE [ V ]

H04-004-003

1411

MS5F07032

DWG.No.

Transient thermal resistance (max.)

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

Forward current vs. Forward on voltage (typ.)

chip Vcc=600V, VGE=±15V, Rgon=5.6Ω, Tj=125℃

Reverse recovery characteristics (typ.)

200

400

600

800

1000

1200

1400

1600

1800

0.0 1.0 2.0 3.0 4.0

Forward current : IF [ A ]

Forward on voltage : VF [ V ]

Tj=25

℃Tj=125℃

100

150

200

250

300

350

400

450

500

550

600

0 200 400 600 800 1000 1200 1400

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

Reverse recovery time : trr [us]

Reverse recovery current : Irr [ A ]

Forward current : IF [ A ]

trr

Irr

0.001

0.010

0.100

0.001 0.010 0.100 1.000

Thermal resistanse : Rth(j-c) [ °C/W ]

Pulse width : Pw [ sec ]

FWD

IGBT

H04-004-003

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

DWG.No.

1412

MS5F07032

Warnings

- This product shall be used within its absolute maximum rating (voltage, current, and temperature).　This product

may be broken in case of using beyond the ratings.

製品の絶対最大定格（電圧，電流，温度等）の範囲内で御使用下さい。絶対最大定格を超えて使用すると、素子が破壊する

場合があります。

- Connect adequate fuse or protector of circuit between three-phase line and this product to prevent the equipment

from causing secondary destruction, such as fire, its spreading, or explosion.

万一の不慮の事故で素子が破壊した場合を考慮し、商用電源と本製品の間に適切な容量のヒューズ又はブレーカーを必ず

付けて火災，爆発，延焼等の２次破壊を防いでください。

-Use this product after realizing enough working on environment and considering of product's reliability life.

This product may be broken before target life of the system in case of using beyond the product's reliability life.

製品の使用環境を十分に把握し、製品の信頼性寿命が満足できるか検討の上、本製品を適用して下さい。製品の信頼性寿命

を超えて使用した場合、装置の目標寿命より前に素子が破壊する場合があります。

-If the product had been used in the environment with acid, organic matter, and corrosive gas ( hydrogen sulfide,

sulfurous acid gas), the product's performance and appearance can not be ensured easily.

酸・有機物・腐食性ガス（硫化水素，亜硫酸ガス等）を含む環境下で使用された場合、製品機能・外観等の保証はできません。

-Use this product within the power cycle curve (Technical Rep.No. : MT5F12959). Power cycle capability is

classified to delta-Tj mode which is stated as above and delta-Tc mode. Delta-Tc mode is due to rise and down

of case temperature (Tc), and depends on cooling design of equipment which use this product. In application

which has such frequent rise and down of Tc, well consideration of product life time is necessary.

本製品は、パワーサイクル寿命カーブ以下で使用下さい(技術資料No.: MT5F12959)。パワーサイクル耐量にはこのΔTjによる

場合の他に、ΔTcによる場合があります。これはケース温度(Tc)の上昇下降による熱ストレスであり、本製品をご使用する際

の放熱設計に依存します。ケース温度の上昇下降が頻繁に起こる場合は、製品寿命に十分留意してご使用下さい。

-Never add mechanical stress to deform the main or control terminal. The deformed terminal may cause poor

contact problem.

主端子及び制御端子に応力を与えて変形させないで下さい。　端子の変形により、接触不良などを引き起こす場合があります。

-Use this product with keeping the cooling fin's flatness between screw holes within 100um at 100mm and the

roughness within 10um. Also keep the tightening torque within the limits of this specification. Too large convex

of cooling fin may cause isolation breakdown and this may lead to a critical accident. On the other hand, too

large concave of cooling fin makes gap between this product and the fin bigger, then, thermal conductivity will

be worse and over heat destruction may occur.

冷却フィンはネジ取り付け位置間で平坦度を

100mm

で

100um

以下、表面の粗さは

10um

以下にして下さい。　過大な凸反り

があったりすると本製品が絶縁破壊を起こし、重大事故に発展する場合があります。また、過大な凹反りやゆがみ等があると、

本製品と冷却フインの間に空隙が生じて放熱が悪くなり、熱破壊に繋がることがあります。

-In case of mounting this product on cooling fin, use thermal compound to secure thermal conductivity. If the

thermal compound amount was not enough or its applying method was not suitable, its spreading will not be

enough, then, thermal conductivity will be worse and thermal run away destruction may occur.

Confirm spreading state of the thermal compound when its applying to this product.

(Spreading state of the thermal compound can be confirmed by removing this product after mounting.)

素子を冷却フィンに取り付ける際には、熱伝導を確保するためのコンパウンド等をご使用ください。又、塗布量が不足したり、

塗布方法が不適だったりすると、コンパウンドが十分に素子全体に広がらず、放熱悪化による熱破壊に繋がる事があります。

コンパウンドを塗布する際には、製品全面にコンパウンドが広がっている事を確認してください。

(実装した後に素子を取りはずすとコンパウンドの広がり具合を確認する事が出来ます。)

-It shall be confirmed that IGBT's operating locus of the turn-off voltage and current are within the RBSOA

specification. This product may be broken if the locus is out of the RBSOA.

ターンオフ電圧・電流の動作軌跡がRBSOA仕様内にあることを確認して下さい。RBSOAの範囲を超えて使用すると素子が破壊

する可能性があります。

H04-004-003

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

DWG.No.

1413

MS5F07032

Warnings

-If excessive static electricity is applied to the control terminals, the devices may be broken. Implement some

countermeasures against static electricity.

制御端子に過大な静電気が印加された場合、素子が破壊する場合があります。取り扱い時は静電気対策を実施して下さい。

-Never add the excessive mechanical stress to the main or control terminals when the product is applied to

equipments. The module structure may be broken.

素子を装置に実装する際に、主端子や制御端子に過大な応力を与えないで下さい。端子構造が破壊する可能性があります。

-In case of insufficient -VGE, erroneous turn-on of IGBT may occur. -VGE shall be set enough value to prevent

this malfunction. (Recommended value : -VGE = -15V)

逆バイアスゲート電圧-VGEが不足しますと誤点弧を起こす可能性があります。誤点弧を起こさない為に-VGEは十分な値で

設定して下さい。　（推奨値 : -VGE = -15V)

-In case of higher turn-on dv/dt of IGBT, erroneous turn-on of opposite arm IGBT may occur. Use this product in

the most suitable drive conditions, such as +VGE, -VGE, RG to prevent the malfunction.

ターンオン dv/dt が高いと対抗アームのＩＧＢＴが誤点弧を起こす可能性があります。誤点弧を起こさない為の最適なドライブ

条件（+VGE, -VGE, RG等）でご使用下さい。

- This product may be broken by avalanche in case of VCE beyond maximum rating VCES is applied between

C-E terminals. Use this product within its absolute maximum voltage.

VCES

を

超

えた

電圧

が

印加

された

場合

、

アバランシェ

を

起

こして

素子破壊

する

場合

があります

。

VCE

は

必

ず

絶対定格

の

範囲内

でご

使用下

さい

。

H04-004-003

This material and the information herein is the property of Fuji

Electric Device Technology Co.,Ltd. They shall be neither reproduced,

lent, or disclosed in any way whatsoever for the use of any

third party nor used for the manufacturing purposes without the

express written consent of Fuji Electric Device Technology Co.,Ltd.

DWG.No.

1414

MS5F07032

Cautions

- Fuji Electric Device Technology is constantly making every endeavor to improve the product quality and reliability.

However, semiconductor products may rarely happen to fail or malfunction. To prevent accidents causing injury or

death, damage to property like by fire, and other social damage resulted from a failure or malfunction of

the Fuji Electric Device Technology semiconductor products, take some measures to keep safety such as redundant

design, spread-fire-preventive design, and malfunction-protective design.

富士電機デバイステクノロジーは絶えず製品の品質と信頼性の向上に努めています。しかし、半導体製品は故障が発生したり、

誤動作する場合があります。富士電機デバイステクノロジー製半導体製品の故障または誤動作が、結果として人身事故・火災

等による財産に対する損害や社会的な損害を起こさないように冗長設計・延焼防止設計・誤動作防止設計など安全確保

のための手段を講じて下さい。

- The application examples described in this specification only explain typical ones that used the Fuji Electric Device

Technology products. This specification never ensure to enforce the industrial property and other rights, nor license the

enforcement rights.

本仕様書に記載してある応用例は、富士電機デバイステクノロジー製品を使用した代表的な応用例を説明するものであり、

本仕様書によって工業所有権、その他権利の実施に対する保障または実施権の許諾を行うものではありません。

- The product described in this specification is not designed nor made for being applied to the equipment or

systems used under life-threatening situations. When you consider applying the product of this specification

to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices,

atomic control systems and submarine relaying equipment or systems,　please apply after confirmation

of this product to be satisfied about system construction and required reliability.

本仕様書に記載された製品は、人命にかかわるような状況下で使用される機器あるいはシステムに用いられることを

目的として設計・製造されたものではありません。本仕様書の製品を車両機器、船舶、航空宇宙、医療機器、原子力

制御、海底中継機器あるいはシステムなど、特殊用途へのご利用をご検討の際は、システム構成及び要求品質に

満足することをご確認の上、ご利用下さい。

If there is any unclear matter in this specification, please contact Fuji Electric Device Technology Co.,Ltd.