99 04/00
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0,0082 to 100 µH
Rated current 65 to 800 mA
Construction
■Ceramic or ferrite core
■Laser-welded winding
■Flame-retardant encapsulation
Features
■Very wide temperature range (up to 145 °C)
■High Q factor
■High resonance frequency
■Suitable for reflow (IR and vapor phase)
and wave soldering
Applications
■Filtering of supply voltages, coupling, decoupling
■Antenna systems
■Automotive electronics
■Telecommunications
Terminals
■Electro-plated
■0,4 µm Cu, 1–2 µm Ag, 5–7 µm Sn
■Base material CuSn6
■Suitable for soldering and conductive adhesion
■No leaching during wave soldering
Marking
Marking on component:
Manufacturer,
L value (in nH) and tolerance of L value (coded),
date of manufacture (coded)
Minimum data on reel:
Manufacturer, part number, ordering code,
L value and tolerance of L value,
quantity, date of packing
Delivery mode
8-mm blister tape, wound on 180-mm or 330-mm ∅ reel
For details on taping, packing and packing units see page 153
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
100 04/00
General technical data
Rated inductance LRMeasured with impedance analyzer HP 4194A
at frequency fL
Q factor Qmin Measured with impedance analyzer
HP 4194A/HP 4291A at frequency fQ
Rated current IRMaximum permissible dc with
inductance decrease ∆L/L0 ≤ 10 %
and temperature increase of ≤ 20 K
at rated temperature of 125°C
Self-resonance frequency fres, min Measured with network analyzer HP 8753
DC resistance Rmax Measured at 20°C ambient temperature,
measuring current < IR
Climatic category In accordance with IEC 60068-1
55/125/56 (– 55°C/+ 125°C/56 days damp heat test)
Solderability In accordance with IEC 60068-2-58
(215 ± 3)°C, (3 ± 0,3) s
Wetting of soldering area: ≥ 90 %
Resistance to soldering heat In accordance with IEC 60068-2-20
260°C, 10 s
∆L/L ≤ ± 3%
Permissible PCB bending 2 mm (100 mm long standard PCB)
Weight Approx. 50 mg
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
101 04/00
Dimensional drawing
Layout recommendation
Dimensions (mm) ABCD
Wave soldering 2,3 1,60 2,1 5,3
Reflow soldering 2,7 1,15 2,1 4,4
IND0063-T-E
1)
2±0,1
0,5±0,2
1)
3,2+0,3
2±0,1
0,15 max.
0,4 min.
1)
2,5+0,3
Marking
Soldering area, tinned
1)
SSB1227-Z
CB
D
B
A
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
102 04/00
Characteristics and ordering codes
1) Closer tolerances and special versions upon request.
2) Replace the + by the code letter for the required inductance tolerance.
For reel size ∅ 330 mm append code number »8«. Example: B82422-A3829-K108
LR
µH
Toler-
ance1)
fL
MHz
Qmin fQ
MHz
IR
mA
Rmax
Ω
fres, min
MHz
Ordering code2)
(∅ 180-mm reel)
Core material: ceramics
0,0082 ± 5 %
J
± 10 %
K
10 20 100 800 0,08 4000 B82422-A3829-+100
0,010 10 20 100 750 0,09 4000 B82422-A3100-+100
0,012 10 25 100 700 0,10 3500 B82422-A3120-+100
0,015 10 27 100 640 0,12 3000 B82422-A3150-+100
0,018 10 30 100 640 0,12 2500 B82422-A3180-+100
0,022 10 30 100 600 0,14 2500 B82422-A3220-+100
0,027 10 23 50 600 0,14 1850 B82422-A3270-+100
0,033 10 20 50 540 0,17 1700 B82422-A3330-+100
0,039 10 25 50 530 0,18 1450 B82422-A3390-+100
0,047 10 26 50 510 0,19 1350 B82422-A3470-+100
0,056 10 26 50 500 0,20 1200 B82422-A3560-+100
0,068 10 27 50 480 0,21 1150 B82422-A3680-+100
0,082 10 27 50 450 0,24 1050 B82422-A3820-+100
0,10 10 25 50 440 0,26 1000 B82422-A3101-+100
0,12 1 22 30 400 0,32 880 B82422-A3121-+100
0,15 1 25 30 390 0,33 850 B82422-A3151-+100
0,18 1 25 30 360 0,38 800 B82422-A3181-+100
0,22 1 25 30 280 0,64 700 B82422-A3221-+100
0,27 1 20 30 235 0,90 650 B82422-A3271-+100
0,33 1 22 30 200 1,3 580 B82422-A3331-+100
0,39 1 22 30 190 1,4 540 B82422-A3391-+100
0,47 1 22 30 150 2,2 480 B82422-A3471-+100
0,56 1 22 30 150 2,2 400 B82422-A3561-+100
0,68 1 22 30 145 2,4 280 B82422-A3681-+100
0,82 1 22 30 140 2,5 240 B82422-A3821-+100
^
^
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
103 04/00
Characteristics and ordering codes (continued)
1) Closer tolerances and special versions upon request.
2) Replace the + by the code letter for the required inductance tolerance.
For reel size ∅ 330 mm append code number »8«. Example: B82422-A1102-K108
LR
µH
Toler-
ance1)
fL
MHz
Qmin fQ
MHz
IR
mA
Rmax
Ω
fres, min
MHz
Ordering code2)
(∅ 180-mm reel)
Core material: ferrite
1,0 ± 5 %
J
± 10 %
K
1 20 7,96 380 0,34 320 B82422-A1102-+100
1,2 1 20 7,96 370 0,37 300 B82422-A1122-+100
1,5 1 20 7,96 340 0,50 270 B82422-A1152-+100
1,8 1 25 7,96 290 0,60 250 B82422-A1182-+100
2,2 1 25 7,96 270 0,75 125 B82422-A1222-+100
2,7 1 25 7,96 240 0,88 110 B82422-A1272-+100
3,3 1 27 7,96 200 1,20 110 B82422-A1332-+100
3,9 1 27 7,96 190 1,40 110 B82422-A1392-+100
4,7 1 27 7,96 150 2,20 110 B82422-A1472-+100
5,6 1 27 7,96 140 2,60 100 B82422-A1562-+100
6,8 1 27 7,96 135 2,80 90 B82422-A1682-+100
8,2 1 27 7,96 130 3,00 90 B82422-A1822-+100
10 1 27 2,52 180 1,60 25 B82422-A1103-+100
12 0,1 27 2,52 175 1,65 23 B82422-A1123-+100
15 0,1 27 2,52 165 1,85 20 B82422-A1153-+100
18 0,1 27 2,52 155 2,00 17 B82422-A1183-+100
22 0,1 27 2,52 140 2,65 16 B82422-A1223-+100
27 0,1 27 2,52 120 3,70 15 B82422-A1273-+100
33 0,1 27 2,52 105 4,50 13 B82422-A1333-+100
39 0,1 27 2,52 90 6,30 12 B82422-A1393-+100
47 0,1 27 2,52 85 7,00 11 B82422-A1473-+100
56 0,1 27 2,52 85 6,75 9 B82422-A1563-+100
68 0,1 27 2,52 80 7,70 9 B82422-A1683-+100
82 0,1 27 2,52 70 10,0 8 B82422-A1823-+100
100 0,1 27 2,52 65 11,5 7 B82422-A1104-+100
^
^
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
104 04/00
Impedance |Z|
versus frequency f
measured with impedance analyzer
HP 4291A
Q factor versus frequency f
measured with impedance analyzer
HP 4194A / HP 4291A
Inductance L
versus dc load current IDC
measured with LCR meter
HP 4275A
Current derating Iop/IR
versus ambient temperature TA
||Z
f
10
34
10
5
10
6
10kHz
µ
µ
µ
10 nH
100 nH
1
10
100
H
H
H
SSB1539-7
10
10
10
_
1
0
1
10
10
10
10
2
3
4
Ω
5
SSB1450-B
00
T
Ι
B
Ι
R
A
0,2
0,4
0,6
0,8
1,0
1,2
C20 40 60 80 100 120 160
Iop
IR
B82422-A****-+100SMT Inductors, SIMID Series
SIMID 1210-100
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
(
++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-
drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-
troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe ent-
halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft ein-
zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
(
++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-
tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
